Windows XP do not use the two virtual processors
I have created a virtual machine in Fusion 2.0.4 (on a MacBookPro (end 2006) running 10.5.7), assigned two CPUS and install a new copy of Windows XP Edition family in it (do not use the automatic installation provided by Fusion). After completing the installation, I booted up and noticed that only one processor showed in the Task Manager, despite two of them showing in Device Manager.
I checked C:\WINDOWS\system32 - ntoskrnl.exe is correctly ntkrnlmp.exe, ntkrnlpa.exe is ntkrpamp.exe and hal.dll is halmacpi.dll - so I don't see a reason why XP would not see the other CPU.
Any ideas? Reinstalling XP does not help. I have attached a copy of my VMX in case this is useful.
Windows XP Home Edition does not support a single socket. In order to avoid interrupting other products license restrictions, we present only single core CPU at the prompt. A dual vCPU VM is presented as two-processor core for Windows XP Home Edition only uses the first processing company. Windows XP Professional clients will see two CPUs in the Task Manager.
Tags: VMware
Similar Questions
-
Windows Firewall is not using the recommended settings and I have no control
Operating system: Windows 7 Ultimate
All classes Microsoft offers updates installed from 19/09/12 @ 19:00
_______________________________________________________________________________________I recently discovered that I have seem to be 'locked' on my firewall settings. I discovered it not because I had problems with my firewall or internet but because I went to control panel to change some settings of firewall and found this:
http://oi49.Tinypic.com/2r3h387.jpg
So I press "Use recommended settings" and think computer for a few seconds and then nothing changes or happens.
My firewall seems to work very well, but why I can't access its settings?The first thing I did was a scan of my computer with Microsoft Security Essentials and Spy-bot Search and Destroy. Microsoft Security Essentials found a virus, but after I removed and restarted my computer the problem remains.
I did a lot of research on this problem before posting here then here are the following things, I've tried. Every possible solution is fixed at 1 photo:
_______________________________________________________________________________________
Possible solution 1: http://oi48.tinypic.com/2ng55hi.jpg
When I type in "netsh firewall reset" this happens: http://oi46.tinypic.com/i2ouc1.jpg
The rest of the commands seem to work, but after that I restarted my computer it had no effect.
_______________________________________________________________________________________
Possible solution 2: http://oi46.tinypic.com/2vmeh6p.jpg
I do not have the other firewall on my computer. I don't have Norton or McAfee that apparently caused this problem with other people. There is no error message.
When I right click on windows firewall "restart" is greyed out, but I can press start.
Empty the column next to it with the State. When I press start, it happens: http://oi48.tinypic.com/33cc4et.jpg_______________________________________________________________________________________
Possible solution 3: http://oi47.tinypic.com/33nhu80.jpg
Method 1: Windows event controller does not exist. The base filtering engine is started and also shows as running in the Task Manager. Authorization of firewall Windows Driver is already set on request.
Method 2: SFC/SCANNOW not detected any problems: http://oi45.tinypic.com/11gj7fn.jpg
_______________________________________________________________________________________
Possible solution 4: http://oi46.tinypic.com/2lu30ut.jpg
Method 1: Even as a solution as Possible 3.
Method 2: I made a boot minimum and restarted my computer with ONLY Microsoft services (I disabled all startup unique programs and service not microsoft). The problem persisted.
Method 3: even as Possible 3.
Method 4: Not applicable for me.
Method 5: I downloaded the antivirus and used today at about 18:30. No viruses were found.
_______________________________________________________________________________________
I tried other things:If I try to use windows firewall advanced in this case: http://oi47.tinypic.com/hu1y0o.jpg
According to Task Manager Firewall is not running and when I try to start it, this happens: http://oi45.tinypic.com/5vdddy.jpg
_______________________________________________________________________________________
So far I have not found any that contributes to this problem. Any help would be appreciated.
Hello
Method 1
I suggest you to run a scan using Windows Defender Offline offline just to make sure that the computer is clean, you have to download it from another computer if possible.
http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offlineMethod 2
I think an upgrade on the spot or complete reinstall would be necessary due to unknown changes that may have been made by the virus. You must back up all your files by using the option to be sure. If you perform a full reinstall you should analyze your backup before restoring the files.How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.Microsoft.com/kb/2255099Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files -
QUESTION OF OFFICE.
INTERNET OPEN THE OPEN A DOCUMENT - EVERYTIME OPENS BEHIND!
OPEN A DOCUMENT, AND THEN OPEN THE INTERNET - EACH TIME, THE OTHER, I TRY TO OPEN - IT OPENS BEHIND.
OPEN INTERNET TO MAKE A VIDEO - OPEN MY VIDEO SCREENSHOT... CAN'T SE DO SO BECAUSE THE SCREENSHOT "GOING BACK."
Seems the FIRST window, I opened wants to stay ON TOP. That if everything went past-before I had multiple tasks, working all I had to do was click on an icon in the toolbar of devices and it will open automatically and overlay everything I opened. NOW, whenever I click on another task for a page; they open behind what was the FIRST OPEN ONE ON.
First an OPEN is unwilling to give up his POSITION. Hope you understand, I need a fix - and if you don't understand after all the above, I give up... I tried right click in the WORLD to find an option for cascade, tile, blah, blah blah blah blah and impossible to find a 'thing'!
help and thanks in advance!
Hello
Welcome to the Microsoft community.
According to the request, I understand that when you try to open multiple windows of the first window always wants to stay on top. I appreciate your efforts to solve this problem.
You can switch to the previous window by pressing Alt + Tab, or cycle through all open windows and the desktop by holding the Alt key and pressing repeatedly Tab release Alt to show the selected window.
Also you can mount in cascade windows by right clicking on the toolbar to switch between windows.
For any future reference.
http://Windows.Microsoft.com/en-us/Windows/working-with-Windows#1TC=Windows-7
Try these steps and let us know the results for assistance.
Thank you
-
Update Windows using the two direct connection to proxy nd
Use the two nd direct net connection by proxy, more time via proxy, is there a way I can configure update without changing the settings?
am on windows 7 Home premium
Please correct me if wrong, using "netsh winhttp import proxy IE" it says you can update via proxy, passing 'autamatically detected settings' proxy servers, will be here all the problems and errors in its conclusion/search for updates (does not search for updates error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000")?
Asked me to do this update of proxy (windows security essentials)
The open command prompt window. [In Vista and Windows 7 you need to open the prompt as Administrator]
2. type of this syntax: NETSH WINHTTP PROXY DEFINED (Insert here the number and proxy server) and press ENTER.
Example: NETSH WINHTTP SET PROXY 1.1.1.1:8080
OR: NETSH WINHTTP SET MYPROXY .NET PROXY: 8080If his point is it normal that windows update as well as the WSE update fails with direct connection?
happened with me with error msg error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000"
If the details of my proxy are 192.168.0.1 port 3128, which is the entrance to the command line...
I had to reset the connection parameters using winhttp reset to retrieve the update in direct connection to the network
Please give me a good solution with this
Help us help you: start by reading this post 'sticky '...
What information to post in the Windows Update forum
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395=======================
You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072ee20x80072EE7; 0xC80003FA 0X8024402F] when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941How to reset the Windows Update components?
-Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
http://support.Microsoft.com/kb/971058~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Application of program compatibility does not start
I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service. What gives?If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.
Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.
-
have a hp 1287c windows 7 tries to use the model of hp 5302 keyboard does not respond
try to use the old Hp keyboard model 5302 was for windows 2000 did not know if could use when I plug computor does not recognize he wonding if possible to work?
45fmj
Hello
Well, the keyboard is now very cheap, the converter may not work correctly. After 16 years of him please give a rest.
Kind regards.
-
Repeatedly tried to install the upgrade to windows 7 and pure install and get the error message on all partitions available "Setup could not use the existing system partition because it does not contain the required free space. All 3 partitions on a single disk have over 90 GB and separated from the disc more than 65 GB of free space according to the properties of the disk and initial screen during installation. Tried to reformat a partition empty all reinstall Xp sp3 without result. What can I do?
Remove the data cable of all drives except the drive that you want to install Windows 7 on.
Remove all external devices.
Delete all partitions on the disk leave all of the disc as "unallocated".
Boot from the Windows 7 DVD and then install, when you reach the point where it asks you to select a drive, click the "Advanced" option and create a new partition (at least 50 GB) to install Windows and continue with the installation process.
-
The firewall of Windows 8 will not use recommended settings.
I have antivirus and firewall ZoneAlarm Security and will not turn on the Windows Firewall. I disabled ZoneAlarm firewall function and the firewall will not always use the recommended settings. I uninstalled ZoneAlarm and still the firewall do not use the recommended settings and activate. How can I fix this program?
Are you kidding me? I said Windows 8 and you gave me solutions Windows 7?
Although most of the solutions may apply to windows 8... And other suggestions check these steps... http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Security/Windows-Firewall-service-cant-start/d322e0bd-10DC-4b85-B297-007133d91a9a
-
When installing win7 ultimate, {install} error message indicates "Setup could not use the existing system partition because it does not contain the free space required... I have 500 GB free, ram 4 GB 2.4 ghz quad... any help?"
If you have any external storage devices such as external hard drive or thumb drive, unplug them, they might interfere with installation.
-
CD/DVD drives not working only not on the two PC running Vista, heeeeeelp!
Hi guys, two PCs, which is new, both running Vista decided that the installed CD/DVD readers shouldn't work!
The new PC reads a CD/DVD when inserted (lamps flash to recognize this is something), then nothing (Autoplay is configured to use
iTunes ") so I'm going to, click on 'Computer' on the disc, and he says "insert a disc into the DVD drive (f) So, I installed the MS auto fix jobbie and it says ' insert readable media...» "I've had (several store bought CD and DVD all failed to save) then I tried to search the upper and lower filter using regedit, but there is no file with this name in the folder on the drive.
Device Manager indicates that drivers are up to date, and the device does not work, even though I have many distinguishing!
Apparently, it is specific to Vista, but suggested courses of action left me with an even worse urge to kick the bloody things around the House that I had when I tried to play the CD in the first place, any help from you lovely people would be most appreciated. Thank you, James :)
Hello
If you have too many programs loading CD/DVD they can collide with each other as they
competition for resources. These will be workload often pieces of themselves in memory at startup
so it will have an effect, even if not to use. If you have installed some of these
lately trying to uninstall it to see if it has an impact.--------------------------------------------------------------------------------------------------------
This troubleshooting help:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
Windows 7 will not recognize the dvd drive
Windows 7 will not recognize the dvd drive, although it worked well for more than two years. Now I can't access it to install new software.
It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.
It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management. If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?
What now? Is turn off the power, my only option? What happens if it is not yet recognized after that?
Hello
If the drive is viable:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I have 2 RAM slots. I have 1 GB installed on one of these locations.
A few months before that I installed a 1 GB of RAM on another location (I gave my CPU to the shop actually to install) and it worked very well.
I had some problems with my PC so I formatted the entire hard drive and reinstalled my Windows 8. But now, he uses only one slot.
So please tell me that
How can I use the two RAM slots?
(Task Manager)
(My computer properties)
Unplug ALL power - then remove the memory - and then put back them in (this process
is known as the relocation and will help if there is corrosion or other question contact). If it's been
contributes not to remove both once again put the one who was in the second slot in the first location to
see if it actually works. If this does not work, you have a bad memory module. If so, put the
another return to the second slot. If it works the problem solved. Otherwise you may have a bad
memory slot so trying combinations using other passers-by.How to reinstall a desktop memory Module
http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htmReinstalling your RAM, graphics card and hard drive
http://www.YouTube.com/watch?v=DLxNPBQBfT8I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?
Hi Sergior96769872,
I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.
Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }
Connect and disconnect activate Cloud Creative applications
Adobe Creative Cloud apps back in test mode after 2015 set CC to update
* NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.
If it still gives you an error of the trial, then please refer to the troubleshooting listed below:
If you are using MAC:
1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support
- Creative cloud
- Basic timing & sync to basic support
- CC library & process CCX
- Adobe Common Desktop
- Adobe update daemon
- Broker CIB Adobe
- After that, everything that said adobe on it do a force quit for her
2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")
~/Library (it will open the folder of the user's library.)
3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater
4 - CUT any installed security software with firewall system.
5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)
These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.
6 - restart the cloud creative app and connect
If you use the WINDOW:
1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager
- Creative cloud
- Basic timing & sync to basic support
- CC library & process CCX
- Adobe Common Desktop
- Adobe update daemon
- Broker CIB Adobe
- After that, everything that said adobe on it do a force quit for her
2 - C:\Users\
\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista) 3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.
These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.
4 - raise the cloud creative app and connect
Let us know if that helps.
-
Could not use the Brush tool because there is not enough memory (RAM)
Hello, I found is a problem that I can not use the Brush tool error message could not use the Brush tool as there is not enough memory (RAM) I use photoshop cc here is my system information:
Adobe Photoshop Version: 2015.1.1 20151209.r.327 2015/12 / 09:23:59:59 CL 1055659 x 64
Operating system: Windows 64-bit 10
Version: 10 or higher
System architecture: Intel CPU Family: 6, model: 12 Stepping: 3 with MMX, SSE whole, FP SSE, SSE2, SSE3, SSE4.1, SSE4.2, AVX, AVX2, HyperThreading
Physical processor count: 4
Number of logical processors: 8
Processor speed: 2494 MHz
Built-in memory: 16267 MB
Free memory: 8727 MB
Memory available to Photoshop: 14479 MB
Memory used by Photoshop: 55%
Range of modifier: enabled.
Space design: disabled.
Work plans: enabled.
Multi-frequency 3D printing: disabled.
HighBeam: enabled.
Tile image size: 1024K
Image cache level: 4
Overview of fonts: medium
TextComposer: Latin
Display: 1
Limits of the display: top = 0, left = 0, low = 1080, right = 1920
OpenGL drawing: enabled.
OpenGL allows old GPU: not detected.
OpenGL drawing mode: Advanced
OpenGL allows Normal Mode: true.
OpenGL allows Advanced Mode: true.
AIFCoreInitialized = 1
AIFOGLInitialized = 1
OGLContextCreated = 1
NumGLGPUs = 1
NumCLGPUs = 2
glgpu [0]. GLVersion = "3.0".
glgpu [0]. IsIntegratedGLGPU = 1
glgpu [0]. GLMemoryMB = 2048
glgpu [0]. GLName = "Intel(r) HD 4600 graphics card"
glgpu [0]. GLVendor = "Intel."
glgpu [0]. GLVendorID = 32902
glgpu [0]. GLDriverVersion = "10.18.15.4256".
glgpu [0]. GLRectTextureSize = 16384
glgpu [0]. GLRenderer = "Intel(r) HD 4600 graphics card"
glgpu [0]. GLRendererID = 1046
glgpu [0]. HasGLNPOTSupport = 1
glgpu [0]. GLDriver = "igdumdim64.dll, igd10iumd64.dll, igd10iumd64.dll, igd12umd64.dll, igdumdim3 2, igd10iumd32, igd10iumd32, igd12umd32.
glgpu [0]. GLDriverDate = "20150717000000.000000 - 000.
glgpu [0]. CanCompileProgramGLSL = 1
glgpu [0]. GLFrameBufferOK = 1
glgpu [0] .glGetString [GL_SHADING_LANGUAGE_VERSION] = ' 1.30 - Build 10.18.15.4256.
glgpu [0] .glGetProgramivARB [GL_FRAGMENT_PROGRAM_ARB] [GL_MAX_PROGRAM_INSTRUCTIONS_ARB] = [1447]
glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_UNITS] = [8]
glgpu [0] .glGetIntegerv [GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS] = [192]
glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS] = [32]
glgpu [0] .glGetIntegerv [GL_MAX_TEXTURE_IMAGE_UNITS] = [32]
glgpu [0] .glGetIntegerv [GL_MAX_DRAW_BUFFERS] = [8]
glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_UNIFORM_COMPONENTS] = [4096]
glgpu [0] .glGetIntegerv [GL_MAX_FRAGMENT_UNIFORM_COMPONENTS] = [4096]
glgpu [0] .glGetIntegerv [GL_MAX_VARYING_FLOATS] = [64]
glgpu [0] .glGetIntegerv [GL_MAX_VERTEX_ATTRIBS] = [16]
glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_PROGRAM] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_PROGRAM] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_SHADER] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_FRAGMENT_SHADER] = 1
glgpu [0] .extension [AIF::OGL:GL_EXT_FRAMEBUFFER_OBJECT] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_RECTANGLE] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_TEXTURE_FLOAT] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_OCCLUSION_QUERY] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_VERTEX_BUFFER_OBJECT] = 1
glgpu [0] .extension [AIF::OGL:GL_ARB_SHADER_TEXTURE_LOD] = 0
clgpu [0]. CLPlatformVersion = "1.2".
clgpu [0]. CLDeviceVersion = "1.2".
clgpu [0]. IsIntegratedCLGPU = 1
clgpu [0]. CLMemoryMB = 1921
clgpu [0]. CLName = "Intel(r) HD 4600 graphics card"
clgpu [0]. CLVendor = "Intel(r) Corporation"
clgpu [0]. CLVendorID = 32902
clgpu [0]. CLDriverVersion = "10.18.15.4256".
clgpu [0]. CUDASupported = 0
clgpu [0]. CLBandwidth = 1.68648e + 010
clgpu [0]. CLCompute = 134,55
clgpu [1]. CLPlatformVersion = "1.2".
clgpu [1]. CLDeviceVersion = 'CUDA 1.2.
clgpu [1]. IsIntegratedCLGPU = 0
clgpu [1]. CLMemoryMB = 4096
clgpu [1]. CLName = 'GeForce GTX 850M.
clgpu [1]. CLVendor = "NVIDIA Corporation".
clgpu [1]. CLVendorID = 4318
clgpu [1]. CLDriverVersion = "359.06.
clgpu [1]. CUDASupported = 1
clgpu [1]. CUDAVersion = "7.5.0.
clgpu [1]. CLBandwidth = 2.97347e + 010
clgpu [1]. CLCompute = 354.272
Type of license: subscription
Serial number: 90970505697637150612
Feature::Photoshop / Extended: WE
Feature::Photoshop/standard: WE
Feature::Photoshop/test: OFF
Feature:32 - Bit layers: WE
Feature::CountTool: WE
Feature::Acrobat3D: WE
Feature::measurement: WE
Feature::MATLAB: WE
Feature::VanishingPointMeasurement: WE
Feature::VanishingPoint3DSExport: WE
Feature::VanishingPointDXFExport: WE
Feature::DICOM: WE
Feature::VideoLayers: WE
Feature::Timeline: WE
Feature::ExtendedMenuBar: WE
Feature::3DPrint App: WE
Feature::ImageStack creation: WE
Feature::ImageStack edition: WE
Feature:32 - Bit painting: WE
Feature::ACRFilterAllowed: WE
Feature::ACRFilterAvailable: WE
Feature::ExportAssetsQueueFeature: OFF
Feature::creative cloud staged: OFF
Feature::3DMultitonePrinting: OFF
Feature::artboards: WE
Feature::Playground: OFF
Feature::chording range: WE
The application folder: G:\Program Files\Adobe\Adobe Photoshop CC 2015\
Temporary file path: C:\Users\PADREM~1\AppData\Local\Temp\
Zero Photoshop has async I/O active
Scratch the volumes:
G:\, 98.6 G, 13.3 G free
F:\, 306.5 G, 15.6 G free
E:\, 234.4 G, 20.7 free G
Required plugins folder: G:\Program Files\Adobe\Adobe Photoshop CC 2015\Required\Plug-Ins\
Main Plug-ins folder: G:\Program Files\Adobe\Adobe Photoshop CC 2015\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library
ACE.dll ACE 2015-09-09 at 18:52:48 79,567158 79.567158
AdbePM.dll PatchMatch 0000-00-00-00: 00:00 1. 1.
AdobeLinguistic.dll Adobe linguistic Library version 9.0.0
AdobeOwl.dll Adobe Owl 5.2.9
AdobePDFL.dll PDFL 2015/09/12-01: 10: 45 79,156620 79.156620
Adobe AdobePIP.dll 7.3.1.70 product improvement program
AdobeSVGAGM.dll AdobeSVGAGM 79.566705 79.566705
AdobeXMP.dll Adobe XMP Core 2015/09/10-01: 10:20 79,158325 79.158325
AdobeXMPFiles.dll Adobe XMP files 2015/09/10-01: 10:20 79,158325 79.158325
Adobe XMP Script 2015/09/10-01: 10 AdobeXMPScript.dll: 20 79,158325 79.158325
adobe_caps.dll Adobe CAPS 9,0,0,28
AGM.dll AGM 2015-09-09 at 18:52:48 79,567158 79.567158
ahclient.dll AdobeHelp Dynamic Link Library 2.0.0.2
AIDE.dll HELP-2015/15/10-11: 58:31 79,568000 79.568000
Amtlib.dll AMTLib (64 Bit) 9.0.0.89BuildVersion: 9.0; Brand: Tuesday, August 25, 2015 07:30:38) 1.000000
ARE.dll ARE 2015-09-09 at 18:52:48 79,567158 79.567158
Axe8sharedexpat.dll AXE8SharedExpat 2015/03/13-23: 40:54 79,562390 79.562390
AXEDOMCore.dll AXEDOMCore 2015/03/13-23: 40:54 79,562390 79.562390
Bib.dll BIB: 2015-09-09 at 18:52:48 79,567158 79.567158
BIBUtils.dll BIBUtils: 2015-09-09 at 18:52:48 79,567158 79.567158
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
CG.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
Adobe CIT.dll CIT 2.3.7.33275 2.3.7.33275
Adobe CITThreading.dll CITThreading 2.3.7.33275 2.3.7.33275
CoolType.dll CoolType 2015-09-09 at 18:52:48 79,567158 79.567158
c:\windows\system32\dnssd.dll Hello 3,0,0,2
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
Dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2015/04/17-16: 55.22 80.1017022 80.1017022
icucnv40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339
icudt40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339
icuuc40.dll International Components for Unicode 2014 10/31-16: 52:45 Build gtlib_6.0.21339
igestep30.dll IGES 9.3.0.113 drive
imslib.dll IMSLib DLL 9.0.1.14
JP2KLib.dll JP2KLib 2015/08/14-01: 13: 58 79,258941 79.258941
libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)
libiomp5md.dll Intel(r) OpenMP * Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0
LogSession.dll LogSession 7.3.1.70
Manta.dll Manta 1. 1.
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2015/08/14-01: 13: 58 79,566687 79.566687
pdfsettings.dll Adobe PDFSettings 1.04
Adobe Photoshop CC 2015 16.1.1 Photoshop.dll
Adobe Photoshop CC 2015 16.1.1 plugin.dll
PlugPlugExternalObject.dll CEP PlugPlugExternalObject Dll (64-bit) 6.1.0 Standard Adobe
PlugPlugOwl.dll Adobe CSXS PlugPlugOwl Dll Standard (64 bit) 6.1.0.157
PSArt.dll Adobe Photoshop CC 2015 16.1.1
PSViews.dll Adobe Photoshop CC 2015 16.1.1
SCCore.dll ScCore 2015/04/17-16: 55.22 80.1017022 80.1017022
SVGRE.dll SVGRE 79.566690 79.566690
svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0
TBB.dll Intel Threading Building Blocks for Windows 4, 3, 2015, 0408
tbbmalloc.dll Intel Threading Building Blocks for Windows 4, 3, 2015, 0408
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll kernel 9.3.0.113
Geom TFKGEOM.dll kernel 9.3.0.113
Adobe TFUGEOM.dll, UGeom © 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 9.0.0.15 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 9.0.0.15
VulcanControl.dll Vulcan Control Library 5.2.0.35 Application
VulcanMessage5.dll Vulcan Message Library 5.2.0.35
WRServices.dll WRServices Friday, July 31, 2015 07:50:10 build 0.21834 0,21834
U3D writer 9.3.0.113 wu3d.dll
Required plugins:
3D Studio 16.1.1 (2015.1.1 x 001 003 x)
Accented edges 16.1.1
Adaptive wide-angle 16.1.1
Angular Strokes 16.1.1
Average 16.1.1 (2015.1.1 x 001 003 x)
Bas-relief 16.1.1
BMP 16.1.1
Camera Raw 9.3.1
Camera Raw Filter 9.3.1
Chalk and charcoal 16.1.1
16.1.1 charcoal
Chrome 16.1.1
16.1.1 Cineon (2015.1.1 x 001 003 x)
Clouds 16.1.1 (2015.1.1 x 001 003 x)
16.1.1 COLLADA (2015.1.1 x 001 003 x)
Halftone color 16.1.1
Color pencil 16.1.1
CompuServe GIF 16.1.1
Pencil tale 16.1.1
Craquelure 16.1.1
Crop and straighten Photos 16.1.1 (2015.1.1 x 001 003 x)
Crop and straighten Photos filter 16.1.1
Hatch: 16.1.1
Crystallize 16.1.1
Cutting 16.1.1
Dark strokes 16.1.1
16.1.1 deinterlacing
DICOM 16.1.1
Difference clouds 16.1.1 (2015.1.1 x 001 003 x)
16.1.1 glow
Move 16.1.1
Dry brush 16.1.1
Eazel acquire 16.1.1 (2015.1.1 x 001 003 x)
16.1.1 entropy (2015.1.1 x 001 003 x)
NO export VERSION color tables
Extrude 16.1.1
FastCore 16.1.1 routines (2015.1.1 x 001 003 x)
16.1.1 fibers
Film Grain 16.1.1
Gallery of filters 16.1.1
Flash 3D 16.1.1 (2015.1.1 x 001 003 x)
Fresco 16.1.1
16.1.1 glass
Scarlet contours 16.1.1
Google Earth 4 16.1.1 (2015.1.1 x 001 003 x)
Grain 16.1.1
Graphic pen 16.1.1
Halftone Pattern 16.1.1
HDRMergeUI 16.1.1
HSB/HSL 16.1.1
IFF Format 16.1.1
16.1.1 IGES (2015.1.1 x 001 003 x)
Outlines in ink 16.1.1
JPEG 2000 16.1.1
16.1.1 flattening coefficient (2015.1.1 x 001 003 x)
Blur of the lens 16.1.1
16.1.1 goal correction
Lens Flare 16.1.1
Liquefy 16.1.1
Matlab 16.1.1 operation (2015.1.1 x 001 003 x)
maximum 16.1.1 (2015.1.1 x 001 003 x)
Mean 16.1.1 (2015.1.1 x 001 003 x)
Measure Core 16.1.1 (2015.1.1 x 001 003 x)
Median 16.1.1 (2015.1.1 x 001 003 x)
Mezzotint 16.1.1
Minimum 16.1.1 (2015.1.1 x 001 003 x)
MMXCore Routines 16.1.1 (2015.1.1 x 001 003 x)
16.1.1 mosaic tiles
Multiprocessor support 16.1.1 (2015.1.1 x 001 003 x)
Neon 16.1.1
16.1.1 paper
16.1.1 color NTSC (2015.1.1 x 001 003 x)
Ocean Ripple 16.1.1
OpenEXR 16.1.1
Paint Daubs 16.1.1
16.1.1 palette knife
Patchwork 16.1.1
Paths to Illustrator 16.1.1
16.1.1 PCX (2015.1.1 x 001 003 x)
Photocopy 16.1.1
16.1.1 Photoshop 3D engine (2015.1.1 x 001 003 x)
Photoshop Touch 14.0
Photo filter package 16.1.1 (2015.1.1 x 001 003 x)
Pinch 16.1.1
Pixar 16.1.1 (2015.1.1 x 001 003 x)
16.1.1 in plaster
Plastic wrap 16.1.1
16.1.1 PLY (2015.1.1 x 001 003 x)
PNG 16.1.1
16.1.1 pointillism
16.1.1 polar coordinates
Portable Bit map 16.1.1 (2015.1.1 x 001 003 x)
Poster edges 16.1.1
People's Republic of CHINA 16.1.1 (2015.1.1 x 001 003 x)
Radial blur 16.1.1
16.1.1 radiance (2015.1.1 x 001 003 x)
16.1.1 range (2015.1.1 x 001 003 x)
Color research grid NO VERSION rendering
Crosslinking 16.1.1
16.1.1 the ripple
Rough Pastels 16.1.1
Save for Web 16.1.1
ScriptingSupport 16.1.1
Shake Reduction 16.1.1
16.1.1 shear
16.1.1 asymmetry (2015.1.1 x 001 003 x)
Smart Blur 16.1.1
Smudge Stick 16.1.1
Solarize 16.1.1 (2015.1.1 x 001 003 x)
16.1.1 spaces
16.1.1 splash
Spherize 16.1.1
16.1.1 sponge
Sprayed strokes 16.1.1
Stained glass 16.1.1
16.1.1 stamp
16.1.1 standard deviation (2015.1.1 x 001 003 x)
STL 16.1.1 (2015.1.1 x 001 003 x)
16.1.1 Sumi-e
16.1.1 summation (2015.1.1 x 001 003 x)
Targa 16.1.1
16.1.1 texture veneer
16.1.1 tiles
Torn edges 16.1.1
16.1.1 twirl watch
16.1.1 U3D (2015.1.1 x 001 003 x)
Draft 16.1.1
Vanishing point 16.1.1
16.1.1 variance (2015.1.1 x 001 003 x)
Virtual Reality Modeling Language. VRML 16.1.1 (2015.1.1 x 001 003 x)
Water paper 16.1.1
Watercolor 16.1.1
16.1.1 wave
Wavefront | 16.1.1 OBJ (2015.1.1 x 001 003 x)
WIA support 16.1.1 (2015.1.1 x 001 003 x)
Wind 16.1.1
Wireless Bitmap 16.1.1 (2015.1.1 x 001 003 x)
Zig - zag 16.1.1
Plug-ins option and the third: NONE
Plug-ins that could not load: NONE
Extensions:
Recent files 1.0.0
G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.ccx.start\index.html CC
2.1.24 libraries
G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.DesignLibraryPanel.html\index.html CC
Beginning 1.0.0
G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.ccx.start\index.html CC
Adobe 6.1.0 color themes
G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.KulerPanel.html\index.html CC
Export as 2.4.0
G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.webpa.crema\PSPanel\dialog.html CC
Overview of the 1.1.3 device
G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.preview\PSPanel\panel.html CC
Share on Behance 3.0.0
G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.behance.shareonbehance.html\index.html CC
Export as 2.4.0
G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.webpa.crema\PSPanel\dialog.html CC
com.adobe.preview.Loader 1.1.3
G:\Program Files\Adobe\Adobe Photoshop 2015\Required\CEP\extensions\com.adobe.preview\PSLoader\loader.html CC
Install TWAIN devices: NONE
Could you please rename the Photoshop CC 2015 preferences and try again.
Please see the following article: preference file works, names, places | Photoshop CC 2014
-
Photoshop will not save the two layers of my doc. Both are visible, cannot merge, cannot flatten, cannot be saved in jpeg or tif. What I am doing wrong? How should I do? How to save my document?
Hi micheleh,
Try resetting the PS preferences
- To restore preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings. New preferences files are created the next time you start Photoshop.
- What happens if you do not use the signature
- Do you use third-party plug-ins in Psalm
Concerning
Rohit
Maybe you are looking for
-
Why siri stop working after upgrading to ios 9?
Why siri doesn't work anymore?
-
I also use firefox for security reasons, banking operations, but all my Bank's home pages also look very distorted. The police has decreased quite considerably. I have to zoom a few times to see the fine print, but the surrounding police seem much la
-
Discussion forums OR expensive. I borrowed a PCI-6111 to my colleague and I'm the test. Analog, max entry in some time he showed 0,00000 V value all the time, but once it comes to show the value the min of entry (for example,-10 V when I put the inpu
-
How I WRITE VISA to 2 devices of a while loop?
Hello I have developed a fairly complex vi that reads data from two sensors and controls SERIES written to two engine controllers. The idea is to send the engine controls more or less "simultaneously", and they are generally not the same commands.
-
No joy w/Windows doesn't update KB2686509 on Windows XP OS
Windows KB2686509 update was never loaded successfully on my desktop Windows XP. I pasted the log below: [KB2686509.log]13.149: ================================================================================13.179: 22:28:35.306 14/01/2013 (local)13.