Update Windows using the two direct connection to proxy nd
Use the two nd direct net connection by proxy, more time via proxy, is there a way I can configure update without changing the settings?
am on windows 7 Home premium
Please correct me if wrong, using "netsh winhttp import proxy IE" it says you can update via proxy, passing 'autamatically detected settings' proxy servers, will be here all the problems and errors in its conclusion/search for updates (does not search for updates error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000")?
Asked me to do this update of proxy (windows security essentials)
The open command prompt window. [In Vista and Windows 7 you need to open the prompt as Administrator]
2. type of this syntax: NETSH WINHTTP PROXY DEFINED (Insert here the number and proxy server) and press ENTER.
Example: NETSH WINHTTP SET PROXY 1.1.1.1:8080
OR: NETSH WINHTTP SET MYPROXY .NET PROXY: 8080
If his point is it normal that windows update as well as the WSE update fails with direct connection?
happened with me with error msg error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000"
If the details of my proxy are 192.168.0.1 port 3128, which is the entrance to the command line...
I had to reset the connection parameters using winhttp reset to retrieve the update in direct connection to the network
Please give me a good solution with this
Help us help you: start by reading this post 'sticky '...
What information to post in the Windows Update forum
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395
=======================
You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072ee20x80072EE7; 0xC80003FA 0X8024402F] when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941
How to reset the Windows Update components?
-Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
http://support.Microsoft.com/kb/971058
~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Tags: Windows
Similar Questions
-
Update Windows using too much memory in Windows XP
In the last week I came across many computers where windows update is slowing down the computer because it uses over 400MB of ram. This seems to affect Windows XP. In the Task Manager wuauclt.exe and svchost.exe are the two files involved. When Windows Update is disabled, everything is back to normal. If you try to update Windows via the Windows Update Web site, there is no answer. Please tell us what to do.
Microsoft has acknowledged the problem-online http://social.answers.microsoft.com/Forums/en-US/xpperformance/thread/2e9bce71-788f-4f8a-bfed-bb713a300922/#d098eb64-7910-4f3c-9f64-2b82806193b6
In the meantime, here is a workaround-online http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ef18ff87-db7f-4705-8105-33dcf9a9a03b/#44e80262-9a91-4ddb-9770-63810962cb8c
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Unable to send anything by using the wifi-direct
Hello
I bought the sony led tv rear 2 days that I want to share files using the wifi-direct, I have the wifi direct on my TV as well as on my smart phone as I have sony xperia z1. the two devices are connected succssfully but I'm still not able to send any file using the wifi-direct .i was tempted to send aid to throw option and office 7 also the instructions of customercare people but then also I am not able to send.can anyone please help me in this.
Thank you
Tarun mehrotra
-
Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator
Dear all,
I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.
Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.Do not work in this way portable stand and port replicator becomes useless.
Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.
Thank you for your quick responses,
Best regards
Cristian
Hello
What R700-xxx you have exactly?
How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?
Could you please post this?
I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too. -
Hi, how to scan a document HP MFP127fn for my Ipad Air2?
The two are connected to my home network - the HP printer is connected by ethernet cable, and the Air2 Ipad connected by WiFi.
I can print from the Ipad to the printer but cannot scan.
The printer is properly connected (IE, it scans to another laptop (windows 7) without problems)
Hi @regtown,
My bad
Looks like you won't be able to scan to PC or Mac with this printer. HP ePrint app is certainly compatible via iOS for printing, but it won't help you analyze for iPad.
Kind regards
-
Could not open the page to update windows with the error 80072efe
Could not open the page to update windows with the error 80072efe
0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058TaurArian [MVP] 2005-2010 - Update Services
-
How D link to connect to the modem connection
I have XP pro and you want to connect to the remote connection MSN my computer use through my D Link router so that I can use the router to connect a tablet like Kindle Fire.Hi Bob,
You can follow this link & check if it helps:
How to set up and use remote connections in Windows XP?
Reference: How to configure Internet access in Windows XP Professional?Hope the helps of information.
-
Original title:
Windows code
I have 2 questions... 1 is - anyone know of any legit windows code, find online programs for windows on a computer code. My wifes sister and she want to fix his computer by putting in a new hard drive and installing windows, but I wanted to see if I could legitimate his computer code and the sticker is missing, damaged already.
2. is possible to get the code for the window using the id and product received in a store you microsoft some how I have two computer, I bought my children 3 years ago and to replace hard drives with larger ones, and one of them still has readable sticker. Thanks again
As I said, reported for an installation by the manufacturer OEM of Windows key code reflects the image of their system and not the license key on the sticker that is what is needed for a re-installation of consumer, is not surprising that the Samsung 2 is the same. The key to the thumbnail is not stored anywhere other than on the tile.
If you cannot or do not want to clone the disks, you can buy a recovery media set at the manufacturer or new media of Windows 7 (becomes very expensive and problematic for the commercial version that MS no longer sells it).
-
I have 2 RAM slots. I have 1 GB installed on one of these locations.
A few months before that I installed a 1 GB of RAM on another location (I gave my CPU to the shop actually to install) and it worked very well.
I had some problems with my PC so I formatted the entire hard drive and reinstalled my Windows 8. But now, he uses only one slot.
So please tell me that
How can I use the two RAM slots?
(Task Manager)
(My computer properties)
Unplug ALL power - then remove the memory - and then put back them in (this process
is known as the relocation and will help if there is corrosion or other question contact). If it's been
contributes not to remove both once again put the one who was in the second slot in the first location to
see if it actually works. If this does not work, you have a bad memory module. If so, put the
another return to the second slot. If it works the problem solved. Otherwise you may have a bad
memory slot so trying combinations using other passers-by.How to reinstall a desktop memory Module
http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htmReinstalling your RAM, graphics card and hard drive
http://www.YouTube.com/watch?v=DLxNPBQBfT8I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How can I import documents in an FCP project, using the DVD player connected to a MacBook Pro 10.10.5 Super player?
You need to rip a DVD? Try MPEG Streamclip or brake hand. Both free. Streamclip better, but much more complicated to install and use.
-
Equium L40: After bad Bios update cannot use the WLan
Hi there hope someone can help.
I've updated the Bios as tempo toshiba said, but I have not read the last piece. Who was that it is not for mine which is the model L40.
I have now tried to put the right pair, but he says he can't. As I'm putting that has an earlier date.
My main problem now is that my wireless stopped working, it says its there and so to work, I put the switch on, but he can't find any networks he used to find approximately 4 in my area
Do I have to restore my entire system :(?
I'm really confused about your message because the European Toshiba page provides drivers and BIOS for one Equium L40 series m.
I found 2 different versions of the BIOS for Equium L40; a BIOS for XP and a BIOS for Vista.In my opinion it of almost not possible to update the BIOS with the wrong version
However, it you have updated and used the wrong BIOS, then you must contact the ASP to help
But first, I recommend a check of the WLan configuration
-
How to use the two counters to PXI-6280, to read and write at the same time?
Hi all
I try to use PXI-6280 counter to generate a command of step motor pulse train. The idea is to send a number done and known pulse for the engine, which belongs to a system XYZ. The point is, if, at some point, the user or the security system can interrupt the movement. If this happens (and will be... a lot), I will lose the real position, because I don't know how many pulses were actually sent to the engine. That is why I want to use the other cost to count impulses how were actually sent to the engine. I can start any tasks (generating or account), but only the first started task will operate. I met a couple of mistakes and I'm not able to find a solution.
Is it really possible to use the two counters? I've already done this in a pci system and worked without problems.
Thanks in advance,
Giavonna
Electrical engineer
I'm afraid that I don't understand your idea. Could explain you better?
Material of the series M support pointing to an arbitrary digital signals at rates (the clock must be provided from another source, for example a counter). If you want a digital pulse train finished output and have access to a counter (the two counters if find you another source for your clock, for example the subsystem "output frequency"), you must use this subsystem 'digital output' rather than the output of the counter. There should be examples in the finder of the example shows how to configure a finished task of digital output.
Now I'm generating sample clock having a single Timed material Point (the only mode accepts this mode), and configure the counter with finite samples.
I don't think not just single point NI the hardware, that's what you want. More commonly, output meter tasks use timing 'Implied', where the release date is implicitly determined by the characteristics of the pulse user-defined.
Is there a way to stop the production of only one meter when a finite number of pulses has been played in another counter?
Yes, but it's a little tricky. You can set a trigger 'Pause' on the output task, with the soruce the break being the internal release of the counter used for the task of entry. Set the initial value of the counter of entry to 2 ^ 32-N (or maybe 2 ^ 32-1-N, I don't have a system right now to check) where N is the desired number of pulse output. Together the counter event behavior for the counter edges of County switch output (this is a property of DAQmx export Signal). When the counter of entry reaches terminal, its in-house production switches, causing thus the task of output to pause. You can then stop the task in the software (you should be able to use the output of the task of entry counter event to signal to the software when the output is paused).
Now that I've written that the whole paragraph, I remember something * similar * to work around a limitation of the driver here . It is not quite the same implementation I described above, but really, you can use a meter output or a counter entry to get the same effect (it could be a good place to start anyway if you want to try this).
Is there a way to read pulses them how have been generated, without the other counter, counting impulses?
N °
Best regards
-
you want to be able to use the wifi to connect with my kindle ebook.
If someone could help, I am wanting to turn the wifi on my pc (dell inspiron 6400). I want to be able to use the wifi to connect with my kindle ebook. the problem I have is, I bought an audio book through the kindle Bookstore using my kindle ereader. a message came up saying that I must be in a wifi, download area. I suppose that if I activate my wifi, I can be able to complete the download. ?
Hi Dave88,
I suggest looking at the support page to see if they have an article or a tutorial on how to do this with your Kindle, Amazon's Kindle: -
Can I use the SATA port connected to an optical drive to plug in a hard drive?
I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?
Thanks, CHemming
CHemming,
I've not seen UEIF support in the existing BIOS.
If your demand on a 3T led, re - consider a maximum of 2 T.
If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.
The cage of your system hard disk will support 3 hard disks. Manual upgrade service
All you need are the SATA data and power cables. Your Board has 4 SATA data ports.
When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.
-
I used up to the allocation for the region 1 & 2 DVD for help. Stuck on region 1 now. I need to use the two regions for my DVD. Help, please. Beryl.
It isn't a MS solution, there are solutions to third parties not supported by MS
Maybe you are looking for
-
Portege M400: Is it possible to use the resolution 1400 x 1050 on external monitor?
The Portege M400 SXVGA (i.e. 1400 x 1050) can support 1400 x 1050 via analog / external monitor? I ask this question because I can't do! Most importantly, he is happy to provide, even if the monitor is a TFT 1400 x 1050 screen is 1280 x 1024. I downl
-
Microsoft Update will not install error 0 x 643 net Framework 1.1 service pack 1
error 0 x 643 microsoft net franwork 1.1 service pack 1 is not installed
-
Sansa Fuze won't turn on.
I just got my Sansa Fuze (4 GB, black) in the mail from Amazon, and it won't turn on or start. I tried to plug it into my windows, and he replied make it really hot and then gives me an error message, something along the lines of "Windows does not re
-
Comcast ISP I can connect directly to a cable modem and internet access. But when I try to use the Linksys WRT160N I get wired access, but not wireless. Then, in 1 minute, I get NO connection. I searched this topic (via several titles and not much
-
my laptop turns off after 5 or 10 minutes, it's hot and I can't hear the fan, the fan still work? If the fan is not working properly, how to fix?