Windows xp does not start Help!

for some reason any start-up became very slow so I read on how to try & fix it.

all I did was remove the programs / files (?) depending on whether I was rarely used, I also read that made every thing on the net before removing:

JAVA (TM) UPDATE 20

COMMS DISTANCE DRIVER
80 RUNTIME LIBRARIES

SEARCH GUARD MORE (MY TATTOONS)

SEARCH GUARD PLUSINSTALL (MY TATTOONS)

NERO 7 ESSENTIALS

GOOGLE EARTH

so now when I turn it on I get the message that windows did not open and it gives me several choices to try & start (with 30 second countdown)

Download

safe mode

Normally start etc etc...

I have tried the one recommended, but he returned to the same job, so I tried all that still no luck.just returns to the same page.

When you try to start sometimes a blue command screen for 1 second, a load of code appears on the other tent .sys stuff & it says tryinfg to install but then after a few seconds-dos at startup screen instrucion

If you can please help!

Thank you very much

Ok. I couldn't decide to say "urgent" or "feverishly".

There are still a few questions in my first reply you must answer if you can...

So, let's start with this:

The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

These can cause corruption in the file system that must be fixed before you do anything else.

If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do. Or, you are welcome to just start trying things that might work.

Boot into the Recovery Console Windows using an XP bootable installation CD.

If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

This is not the same as recovery disks that might have come with the acquisition of the system store.

You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

The ISO bootable image file you need to download is called:

xp_rec_con. ISO

Download the ISO from here:

http://www.mediafire.com/?ueyyzfymmig

Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

http://www.ImgBurn.com/

When you install ImgBurn, DO NOT install the Ask toolbar.

Here are some instructions for ImgBurn:

http://Forum.ImgBurn.com/index.php?showtopic=61

It would be a good idea to test your bootable CD on a computer running.

You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.

When you start on the CD, follow the instructions:

Press any key to boot from CD...

Installing Windows... going to pronounce.

Press 'R' to enter the Recovery Console.

Select the installation that you want to access (usually 1: C:\WINDOWS)

You may be asked to enter the password (usually empty).

You should be in the folder C:\WINDOWS. It's the same as the

C:\Windows folder that you see in Solution Explorer.

The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.

Assuming your boot drive is C, run the following command:

CHKDSK C: /r

Let chkdsk finish to correct the problems, he could find.

It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.

You must run chkdsk/r again until it finds no error to correct.

Remove the CD, and then type "exit" to exit the RC and restart the computer.

You have not to set the BIOS to boot the disk HARD since the CD won't be.

Tags: Windows

Similar Questions

Please help: Windows XP does not start error message: STOP: 0 x 00000024

Original title: Please help: Windows XP does not start.

Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

If this is the message you get, then you have multiple problems...

1, xp should be on the C: drive, not F:

Default C: is for the OS only. With xp on drive F: and you use only a hd

then the hd must be formatted and all partitions deletion (unless there is a relocation

the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

Read kb307654 or kb314058

my windows firewall does not start and I get a erroe code 5, can someone help me

my windows firewall does not start and I get a erroe code 5, can someone help me

Hello

1. What is the brand and model of the computer?

2. what security software is installed on the computer?

3. have you made changes on the computer recently?

Method 1.

To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

Method 2.

Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

I hope this helps.

Windows 7 build in windows game does not start

Windows 7 build in windows game does not start

Hello

· What happens when you try to start the game?

· You get the error message?

Try this:

a. go to start and in the search type 'Turn Windows has or not'.

b. click on "Turn Windows features on or off".

c. find the games and place a check in the option of games. Click OK

d. restart the computer

For more information, see the article below:

http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

Diana

Microsoft Answers Support Engineer

Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Windows Firewall does not start. Cannot start connection ICS internet sharing service

Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

Windows Vista does not start after installing Linux OS

original title: Windows Vista does not start after the installation of the Linux OS... Help!

I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup. Goes directly into Linux.

I need to get back to normal. Any help would be appreciated.

I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup. Goes directly into Linux.

I need to get back to normal. Any help would be appreciated.

Hey Oscar Jose

Download the correct ISO file and make a disk bootable from the link below

Then use the Startup Repair option when you start from

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

Thirdly try to ask in a fedora forum to solve the problem, he has caused

http://fedoraproject.org/

Walter, the time zone traveller

Windows Vista does not start, turns to a blue screen error 2203

original title: Windows Vista does not start, turns to a blue screen HELP PLEASE!

Help, please! So I'm panicking here, just yesterday, I tried to download the update to Itunes, and it did not work. So I followed the instructions and uninstalled the program first, but one of the applications does not uninstall correctly. I thought I could just substitute with the update and replace. The error code was 2203.

So I thought it was right after the download all itunes thing, and when I came back to check on the download, the screen turned to this black thing with words on this subject. I decided to force closing down by pressing the power button. Now everytime I turn on the computer, it leads to the screen saying 'windows is loading files', then this blue screen with a very large arrow (the mouse). I tried pressing the F11 key and stuff, but I have no idea what to do. PLEASE REPLY AS SOON AS POSSIBLE, REALLY NEED A COMPUTER!

"I tried to do the second option, because the first really helped."

Something works, or it doesn't work regarding: "really helped."

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I'm sorry, but I don't understand where the procedure of ISO part 2 stops.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

You may be interested in this:

Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

There is no Vista free download legal available.

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their own way of making recovery disk/s.

See you soon.

Mick Murphy - Microsoft partner

Windows VISTA does not start - shows a green bar horizontal scrolling forever, safe mode stops at crcdisk.sys

Windows Vista does not start. It shows the horizontal scrolling green bar with microsoft (c) and then goes to a black screen with the mouse arrow that moves. Start in safe mode loads the drivers to the extent of the crcdisk.sys but meet once again at the black screen with the mouse arrow. Have not the SATA drives connected. Impossible to get to the command prompt to delete all files. No work from safe mode. Restore computer does not work. I have looked at other posts regarding the renaming/deleting files, but cannot get to the command prompt to resolve this problem. The computer is less than 2 years.

Toshiba Satellite A205-S5831, dual processor running. Running Windows Vista BASIC. Hard drive seems to work, lighting, well working properly, no error at startup. No perifpherals or a mouse, or a USB attached. Disabling USB does not boot.

Can someone give a help?

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

There is no Vista free download legal available.

http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > find the latest Vista drivers for it > download/install the

See you soon.

Mick Murphy - Microsoft partner

Windows 7 does not start normally.

Windows 7 does not start normally. The Startup Repair tool will not fix the problem and restore the system to the restore point further did not help either. I ran a Windows Memory Diagnostic, and he says that he has no problem. I started the system in Mode safe, everything seems to work fine, but I can't seem to find something that will solve the problem and allow Windows 7 start in Normal Mode.

In Safe Mode, try setting up Windows for "clean boot".

http://support.Microsoft.com/kb/929135

Follow step 1 to clean boot, and then see if you can start the computer in Normal Mode.

My windows in does not start

My windows in does not start when I turn on it shows the black screen written as

A7529IMS V4.1 071009

PENTIUM DUAL-CORE E5500 @2 PROCESSOR. 80 GHZ

Frequency DRAM DDR2 (dual channel)

Initializing USB controllers... Fact

Press DELETE to enter the Setup menu, F11 to enter the Boot Menu.

But he's not going after pressing the F11 or DEL even I wait 7 hours.

So please help me for that operate the window.

Hello

Thanks for posting your query in Microsoft Community.

I understand from the description of the issue that you are having problems with starting. I'll be happy to help you with this problem.

M odes 1: try by selecting disable automatic restart on system failure from the options of start menu advanced to know the error.

Method 2: Connect the drive hard back and remove non-essential external devices to the computer.

Method 3:
Step 1: Check if you can start the computer in safe mode.

Step 2: If you are able to start and then perform a system restore to the time where you encountered this problem. Check if you can start fine. If so, then log the manufacturer's Web site and install the latest drivers available for the computer, including the chipset drivers.

Method 4: If you are not able to boot, then try to do a Startup Repair and see if it helps. Also see this articlefor more information.

Method 5: I suggest update you also the firmaware BIOS from the manufacturer's website and check.

Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

Windows Vista does not start - only Safe Mode

Hello

Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

Press F8 all turn the laptop.
Choose the first option: by computer repair and try to repair the operating system automatically.

Windows XP does not start

Suddenly Windows XP does not start, instead, I get a message that says"

Type the name of the shell for example, c:\windows\command.com.

I am able to boot in safe mode but.

Can anyone suggest what may be the cause of this and especially what should I do?

Thank you

Tony

Thank you, Gerry. But the problem turned out to be a defective drive cable.

Tony

Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

Hello

1 did you changes to the computer before the show?

You can try the troubleshooting provided in the link below steps to fix the problem.

Computer stops responding with a black screen when you start Windows XP

http://support.Microsoft.com/kb/314503

Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

You have all the features non-essential related to the machine?
Have you installed a new hardware or software recently?

Try to do a repair install and see if it corrects the problem.

How to perform a Windows XP repair install

Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

Lately, I'm leaning toward the Hiren's BootCD you can download here:

http://www.hirensbootcd.NET/

On the left, click on download, scroll down, choose the most recent version

The download link is a little hard to see. It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

Direct HTTP mirror + Torrent, Torrent Magnet

Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

The ZIP file is large, so the download will take probably some time to complete. Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD. You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it. The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner. You can also use your own burning software as long as your software is able to create a bootable CD. ISO file. More modern burning programs can create a bootable CD. ISO image. Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

If you need a simple and CD burning, this is a free software popular software:

http://www.ImgBurn.com/

Here are some instructions for ImgBurn:

http://Forum.ImgBurn.com/index.php?showtopic=61

It would be a good idea to test your new bootable CD on a computer running.

You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.

When starting on the Hiren's CD, you will see a menu of options. Choose Mini XP.

It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using. You will feel at home.

Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc. There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

What is your system brand and model?

What is your Version of XP and the Service Pack?

Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

Windows xp does not start Help!

Similar Questions

Maybe you are looking for