have photosmart b110a and after the update, it will not print or scan to my office

Similar Questions

• Photosmart D110a: installed the new HP black ink cartridge and now the black ink does not print

  Just installed a new print 60xl cartridge to replace the one that was being ink. Now the black ink basically does not print. I cleaned the cartridges 4 times and run all Diagnostics pages. The black prints just a small piece of the upper part of the letters on the pages of diagnostics and in grayscale on the test pages.

  Hello!
  Welcome to the HP Forums, I hope that you are @janmacwill,

  I saw your post on the black ink does not print your Photosmart D110a and I wanted to stop making you share my suggestions. See the link below to solve the problem and if the black still does not print, contact HP (below) to see about a replacement unit.

  Printer prints a blank Page or doesn't print black or color ink for the printer series HP Photosmart e-All-in-One (D110a and D110b)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up".

  to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

• Dvd player MediaSmart not working - when a Blu - ray Disc I'm invited to be updated, but even with the update it will not play.

  I have laptop HP Pavilion dv7-1260.  When I put in a blu - ray disc I'm propmted to get an update.  Even with the update, it will not play a blu ray.

   

  Hello

  ·         What is the update message that you receive?

  ·         Do you have an error message when you try to read the Blu - ray Disc?

  ·         This problem occurs only with Blu ray discs or any of the others?

  To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/MPEG-and-DVD-video-frequently-asked-questions

• Printer says I have ink in the cartridges but will not print black

  I have an HP Photosmart Premium C309g-m.  I am frustrated because for now, it will not print anything black.  The color setting shows that I have sufficient ink in all cartridges, including the ordinary and photo black black.  Should I assume that I have a bad ink cartridge (even if it was printing without problem), or is a printer problem?  I ran to the print head clean definition, but it did not help.

  It could be the cartridges, but I doubt it.  What you can try, is not this video, I'm going to the link below and also Bob Headrick printhead soaking.  I hope that will fix him

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/how-to-troubleshoot-print-quality-problems-video/m-p/4029104#M48162

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

• With instant full VM LUN and now the virtual machine will not start or register

  Hello

  I have a case here, where we have a virtual machine that quickly filled the logic unit number and the snapshot is currently 110 GB. It is now available on the new LUN space, but the VM does not start and he was also addressed as 'unknown' in the viclient. I tried to cancel the registration and check-in again, but he refuses to register. It seems that the snapshot is damaged.

  When you try to save it, I get the following in hostd.log:

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': (17) successfully opened size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': open with success (21) size = 48348147712, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 3

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-flat.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': (17) successfully opened size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': open with success (21) size = 214764819456, hd = 0. Type 8

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-VMFS: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000001-delta.vmdk ': closed.

  DISKLIB-LINK: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-STRING: ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ': cannot open (the specified file is not a virtual disk).

  DISKLIB-LIB: unable to open ' / vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA_1-000002-delta.vmdk ' with flags 0 x 11 (the specified file is not a virtual disk).

  Referred to as registry: AXAPTA/AXAPTA.vmx

  Vmsvc indicates file is loaded, by: /vmfs/volumes/48be6db3-f04f46d1-d765-001f2959edbb/AXAPTA/AXAPTA.vmx

  I also tried to copy virtual machines directory down to a local PC and run via VMware Converter, but I get the message "the source VMware Consolidated Backup"filename.vmx"has a missing catalog file.

  1. VMware - v

  VMware ESX Server 3.5.0 build-130756

  Any help is appreciated.

  Lars

  The problem (according to the newspaper) is AXAPTA_1-000001 - delta.vmdk no AXAPTA_1-000002 - delta.vmdk (the error on the second snapshot is probably because of the broken parent snapshot).

  The descriptors are ok, which means that the VMDK itself is broken.

  If you do not have a backup, you can try the following:

  -Copy the files in another data store

  -change the second snapshot descriptor to point to the basedisk as the parent

  -Try and mount the drive

  -If you're lucky, you should be able to recover at least some data of

  -If the disklib is complaining again then the two snapshots are broken - which is unlikely

  Depending on how old the second snapshot (the older one is better it is) the method above will not help.

• Updated but will not print pages from the internet

  I had AdobeX, but he refused to print anything from Firefox, not even a selection. I deleted and I went back to 9.4, but it STILL will not print for me more. How can I fix it?

  OK, I got it - it turns out that the upgrade has changed the default printer in the settingds for Firefox... I won't go back to 9 or X however, as others seem to have hurt, too.

  FIXED - FIXED - FIXED

• information on the tax forms will not print not

  Created the tax documents pdf file, but only the form itself will be printed without the tax information.

  Hi markyZero1,

  While printing the tax using the drive, make sure that you have selected "Document & annotations" in the print when printing dialog box.

  

  Check if it works.

  Otherwise, you will need to get the PDF Reader Extended form (File menu-> Save as other-> Reader Extended PDF-> activate more tools) using Acrobat application & then try to print the PDF file.

  Kind regards
  Nicos

• After the update of Sierra: not to Disable Trackpad with Magic Mouse connected

  Hello

  After that I updated to macOS Sierra on my MacBook Pro the Trackpad is not disable mouse connected with Magic.

  Feature: MacBook Pro retina 15 inches (end of 2014) on macOS Sierra.

  Since the update, I noticed that my stays compatible with my Magic Mouse connected after built-in trackpad window connection.

  In system-> accessibility-> mouse and Trackpad preferences, I have not "ignore the built-in trackpad when mouse or trackpad wireless is present". If I switch it off and on again once again, the parameter will be.

  However, once I lock the device (user name right-> connection... window) and reconnect, the trackpad works. You must pass the parameter each time.

  Is this a bug of Mac OS Sierra (can't find anything) or am I missing something? I am aware that the trackpad is reactivated at the login window, but before it will deactivate after logging in.

  I don't use Magic Mouse, but I have USB Wired mouse and I have the same problem since installing Sierra.

  I have the box ticked, but I must go and clear the check box and then save.

  I have to use a mouse all the time because my trackpad goes haywire and I wasn't able to find a solution for this. It moves its own and open stuff on its own.

• After the update automatic, could not load desktop under the screen turns off after logon

  Original title: computer running Windows 8 will not correctly restart after automatic updates & close

  I have Windows 8 my computer does not start correctly after it has automatically closed for the automatic updates last night. When I turn on the computer I can connect as user, however once I do it says welcome and the screen turns white. The only thing visible is the cursor if I move the mouse. There is no Apps and I can't get to my desk or anything else. I tried to restart again and press F8 and nothing. However, I can bring up the Task Manager, but that's all. Help, please.

  Hi Patricia,

  I understand that you get a black screen after that it was closed automatically for automatic updates. It might be difficult when things don't work the way it should be on your computer. This problem might have occurred because of the conflicted with the system files update or could be a problem with the display card drivers may be due to the virus/malware infection.

  Many users complain about the issue with a black screen to logon Windows. Microsoft has not yet determined the exact cause of this problem.

  However; I suggest you to please follow the steps suggested by Scott Atk began August 30, 2014 in the following link and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  Please answer us on the State of the question to help you further.

• Re: Satellite Pro L300 - update after the BIOS, Windows will not start

  Hello

  I updated the BIOS on my laptop to the latest version and now it does not start in Windows. I can get to the BIOS menu. I tried to restore the default values and saved the day, but he's just a blue screen with writing on whichIi do not have the time to read it before it tries to restart and continues to do the same.

  Any ideas anyone?

  see you soon
  Phil

  Hi chaospunx,

  Which HDD mode did you use before the BIOS update? Perhaps this option, you need to change, then Windows will start up again.

  You can choose between the mode of access AHCI and Compatible HARD disk.
  Check this box!

• IAM has a problem with the update it will not install code646 KB977839. I tried to install it several times and it still will not be installed. It keeps telling me to try again.

  I have tried everything what iwas instructed aet again this update will not start I get error code646

  Tip: Insert your Office CD in the Bay before the next attempt to install appropriate.

  Tip: If no joy, see if you can download the "fullfile" of the update and then install it manually =>

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a9738816-72cb-404B-9FCB-c58359ce550f

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XP and still receive the updates that will not be powered off (except by pressing the key stop for 10secs) computer.

  Started to have a problem with the computer, download the updates, but seems never to end.  Computer can be left running all night, and he said again it is the download of updates and should not be extinguished.  It can be turned off only by pressing the power button on the computer for about 10 seconds, or just unplug the computer.  There is clearly a problem here, but do not know how to solve.  Any help out there?, thanks in anticipation. PP

  Hello

  Were there any changes made to the computer before the show?

  Please follow the methods and check if it works very well.

  Method 1:

  Run the Microsoft fixit for the link.

  Check out the link:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

   

  Method 2:

  Follow the steps in the link.

  Check out the link:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  NOTE: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• I have a XP and suddenly the cd player does not work. I put disks in it, but they do not appear in media players. On my computer, it shows that the drive is there.

  I may get paranoid, but the player made a weird noise the first time I start my pc and noticed that the drive is not play discs. It has burned or broken some how? Is it possible for me to confirm that apart from go to a store and pay someone to check this?

  Hello Downey3,

  Thank you for your message.  It could be that your player has gone wrong, you have another computer that you could test with?  Otherwise, you could check the Device Manager to see if it could be a driver problem (steps below).  Click HERE , and then run the FixIt!
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on Device Manager.
  Do you see a yellow! next to your CD/DVD drive?  If so, you may need to go to your computer manufacturer's website and download the latest driver/firmware.  Is it permits?  If this is not the case, turn it on and test.
  
  
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Before and after Image Slider widget will not be displayed in the lightbox display composition

  So my project involves a major project gallery page containing several compositions display lightbox that trigger when click.

  For some reason any when I add the widget before/after Image Slider Muse - Themes in the lightbox, the widget will not be displayed on the preview or Chrome.
  Please help me and thank you.

  You will need to contact the Support of the Muse-themes to see if it is compatible for this purpose or if it is possible.