Windows Xp Moonlight get Sata to work

Similar Questions

• How to validate windows XP and get wireless to work on compaq mini 110 c-1001nr?

  My father (86) crashed his compaq mini and it was all blue screen, so I tried to use this recovery software to restore the factory settings, but nothing has worked. a friend suggested from scratch, so to format hard drive and reinstalled windows Xp for him. He worked for a month and now ask you the key product, but when we enter the key at the bottom of the computer it says invalid.

  I tried HP support, but I need to connect to the internet to download anything and the wireless is not working.what can I do now?

  When I start it up it says windows xp starts and says "the copy of Windows must be activated before you can connect" then we are stuck in the entrance of your product keys page. I click on phone, given that my key does not work and called the number he says and will not let me reset it.

  Give Microsoft activation will not take the "reset" answer, youre activation, do not reset.

  That # is 8885712048

  In addition, change "internet connection" in the Control Panel, locate the properties of the material change

  In addition, change 'internet options '.

  In addition, youre pc hardware software/drivers (if based on intel) intel.com will have the necessary downloads,.

  Search/drivers/software support, look for the update utility

• Satellite A210-19Z: could not get internet to work with Windows XP installed

  Hello

  When I install Windows XP on my Satellite I can not get Internet to work

  Do I have to install drivers or so?
  Please post links to the drivers if so.

  Christian

  Of course you need readers.

  If you have connected your router with a LAN cable, then you will need to install the LAN driver. If you want to use the network WiFi WLan driver must be installed also.
  If your computer laptop doesn t supports the WLan card then the WLan driver is not required

  All the drivers (if available) XP can be downloaded from the European driver Toshiba page!

• Satellite P100-434 - Windows Vista - how to get Aero to work

  Hi does anyone know how to get Aero to work on my Tosh laptop. the OS is Vista Home Premium and I have exhausted the help options OS affecting theme Win Vista, color scheme to Aero etc.

  Hello

  The laptop should be certainly be able to use the AERO.
  It supports a 256 MB card and 2 GB memory graphics.

  So it seems you only need to activate the Aero on your Vista.
  But which version of Vista is installed on the laptop.
  As I know the basic home edition version does not include the Aero. The Aero is available on the Home Premium edition or newer

  So now you ask what you can do? I found these tips on the site of Ms.
  Check if the desktop theme has been set to Windows Vista

  1. open theme settings by clicking the Start button, clicking Control Panel, appearance and personalization, customization and then clicking theme.
  2. in the theme list, click Windows Vista, and then click OK.

  Try to enable transparency widowed intercadres.
  But note; to enable transparency, the color scheme must first be set to Windows Aero.
  1. open Personalization by clicking the Start button, clicking Control Panel configuration, on appearance and personalization, and then click customization.
  2. click on the appearance and color of the window.
  3. Select the transparency check box.

• I can't get any printer work with Windows XP too more.

  I can't get any printer to work with my computer which uses Windows XP.  I checked with the companies of the printer and it is not a driver problem.  In addition, these printers all work on other computers that use Windows XP.  In addition, they worked on my computer for years until a few weeks ago.  I have been informed by the technicians of the printer who checked my computer to verify that it was not a 'driver problem' that there is a problem of Microsoft XP. It seems that the part of XP that runs the divers feel is corrupt.  The print job will go to the print spooler, but it is never sent too the printer.  Anyone has the clues how too fix this?  Y at - it an XP patch that might do the trick?  Also, I tried a "System Restore" in several places and it was not fixed.

  Choose a printer and work to get this working.

  In the windows printers and faxes, you see a printer that is in line with a status if "ready" and are able to print a test page (right click, properties, print the Test Page). "

  If there is a jam in print job in the queue of XP, nothing will be printed until the jam is cleared.

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  See if you can now print a Test Page.

  Submit new failure of print jobs.

• When I try to make my windows update I get error 641. I think it has something to do with my windows service install. I just want a simple solution to get my windows install to work.

  When I try to make my windows update I get error 641.  I think it has something to do with my windows service install.  I just want a simple solution to get my windows install to work.  When I try to update itunes it also fails.

  Yes, mechanic system is installed.  but I think that I have fixed last night.  IHAVE has since been able to get my installed updtaes and my itunes updated.

• Is Windows Install - a shield Safe? If this is the case, how do I get it to work again.

  Original title: Windows install-A-Shield

  Hello

  I use to get automatic updates to install a shield and I've not been doing them for a while.  When I click on it I get a message that says: "Windows searches for ISUAPM, exe."  To locate the file yourself, click BROWSE. "When I click on BROWSE, files are empty for this application.

  1 is Install Shield Safe?

  2. If this is the case, how do I get it to work again.

  I'm running on Windows Vista Edition Home Premium and I have Windows Version 6.0; Service Pack 3.  If you need info to Add ' l, let me know.  I'm not educated computer, so please explain in detail because I don't want to crash my computer.

  Thank you for your help.

  Babacar

  Hello
   
  Contact install shield manufacturer for more assistance.
  Here is the link: http://community.flexerasoftware.com/

• At boot Dell Studio 540 running Vista, I get a warning that "Windows host process (Rundll32) has stopped working.

  After each start up my Dell Studio 540 with Vista, I get a warning that "Windows host process (Rundll32) has stopped working.  Although this 'fault' seems to have no obvious effect on the following operations, it is very annoying to have to clear the window. I applied the suggested solutions elsewhere, but without success either.  Can someone please help me - in simplistic terms that I am a silver surfer?  Thank you very much.

  * original title - yet another problem Rundll32 *.

  Thanks a lot for the guide. Finally, I've identified the problem via the boot as in the NVIDIA driver.  I've now updated that and everything seems to work fine - touch wood!

• How to get joystixpro to work in windows 7

  How to get joystixpro to work in windows 7

  Original title: Joystix Pro

  Hi Alan,

  (1) what happens when he tries to use Joystix Pro on his computer?

  (2) what is the full error message?

  According to joystixpro support, Windows 7 supports the use of Joystix Pro.

  I suggest you refer to the procedure described in the FAQ mentioned in the link Joystix Pro

  https://www.joystixpro.com/what-is-joystix/FAQs/

  If this does not help, I suggest you to contact the Joystix Pro support:

  http://www.joystixpro.com/Forum/Forum.php

  https://www.joystixpro.com/support/

  Check the link for more information;

  https://www.joystixpro.com/what-is-joystix/what-do-i-need/

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• How can I get dreamweaver to work properly in the display high definition [was windows 10]

  How can I get Dreamweaver to work in the 10 window?

  rayates55 wrote:

  All I said was meant to apply to the recent release of Dreamweaver 2017. Please fix.

  I see.  Well, I can't fix anything.  I do not work for Adobe as it is a user forum.  So you're preaching to the converted here.

  If you want to make comments that will get noticed, submit a Bug/Feature request.  You can find it in the Help Menu of DW.

  Nancy O.

• I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

  I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

  Gary

  The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

  The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  When you have done this, place you and double click on the correct catalog and LR should then start OK.

• content of display problems sometimes traces of the previous window/application XP gets stick for him working window/application

  In windows XP, the traces of previous window/application sometimes stick to her working window/application, can you give me a solution to this problem, I use SP3...

  I will wait your answer with a way to solve the problem.

  Hello

  You can try to update the video card drivers and check if that helps.

  See the links below for more information.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

• How can I get microsoft publisher works on my computer which uses Windows Vista Home Premium

  whenever I try to download microsoft publisher or microsoft office professional edition with publisher on my laptop which uses windows vista, I get an error message saying that the implementation is unable to act because I need as a result of the other x86platform with vista sp1, or the x64platform with vista sp1... What does that mean? and how can I Publisher on this computer? Thank you

  Hello

  You will need to make a direct download of the SP1, SP1 is no longer available via Windows Update.

  You don't say what that 'little' version of Vista you have (32-bit or 64-bit) and x 86 in your question is the 32-bit version:

  Click Start > right click on computer > left click on properties > it will tell you it.

  Select download OK "bit".

  Download for Vista SP1 (32-bit): http://www.microsoft.com/download/en/details.aspx?id=30

  Download for Vista SP1 (64-bit): http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21299

  See you soon.

• Windows 7 can not get bitlocker to work: error 0 x 80310052

  I have a Lenovo x220t core i7 Sandy Bridge with dual boot Windows 7 C: and D: 8 Windows.

  I installed Windows 7 Ultimate for bitlocker.   Windows 8 fine encypts of Windows 8.

  When I try to encrypt Windows 7 from windows 7 I get this error:

  The path specified in the Configuration data (BCD)-start for an application protected by BitLocker Drive Encryption integrity is incorrect. If please check and correct your BCD settings and try again.

  I tried the steps described here such an error: http://support.microsoft.com/kb/929834

  However, I get the same error,

  Help, please

  Thank you
  Brian

  Hello

  I suggest you send the same question in the Microsoft Technet Forum for assistance.

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

• How can I get FireFox to work on the first Google ChromeBook addition? He repeats to me upgrade and when I do it says does not support?

  How can I get FireFox to work on the first version of the Google ChromeBook? Everytime I open it it said to update or upgrade to FireFox and make it your main page. So I downloaded it and it's open once it is installed, but then a message appears that says "can't stand" search for an application that supports FireFox and its software, or something of the sort. I was sitting here with a full battery when I started and now it is dead... and I still don't have FireFox on my ChromeBook.

  What do I do now or how do I get it to work? And if it just simply won't work on a CHromeBook then they need to have that riht out in the open.
  

  Hello

  I had a peek in this and was informed that Firefox does not work on Chrome OS.

  It is designed and done a little differently from the likes of Windows and Linux and will not support another browser being installed.