Windows XP Prof. SP 3 stops itself

Similar Questions

• When I leave my computer for 10-20 minutes it stops itself and I have to go and start it up again.

  Original title: My computer turns off too soon. How can I change this.

  When I leave my computer for 10-20 minutes it stops itself and I have to go and start it up again. It's very frustrating. I want him to stay that I can continue to run a program that converts formats. When she stops formatting stops. How can I change the system to keep it set.

   

  Hello

  1. what operating system is installed on the computer?
  2. didn't it closes completely down or will he sleep?
  3 did you changes to the computer before the show?

  It could be due to food or an electrical problem in the PC.

  Method 1: Open the troubleshooter of power
  http://Windows.Microsoft.com/is-is/Windows7/open-the-power-Troubleshooter

  Method 2:
  Step 1: Check the Safe Mode issue.

  Reference:

  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:

  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 3: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

• MacBook Air keeps stopping itself and gives a report of Panic CPU. Repair warranty or fixable?

  My MacBook Air keeps stopping itself, when he is asleep, or even using active? Some big long panic report arrives and I have no idea what all this means, what's wrong with it? She did this 4 or 5 times a week for 2 months now. I read here similar questions but do not understand the answers. It is almost always plugged in power, my 2 year warranty is updated until August 2016, 6 months ago, the motherboard has been replaced and told me that it looks like new. So what's happening? I need a repair under warranty again? I tried to copy and paste the report but I get a message saying that my question has invalid characters?

  Check if your MBA has had a kernel panic.  If so connect and confirm it with these instructions:

  https://support.Apple.com/en-us/HT201753

  It can be a clue to your problem.

  Ciao.

• Satellite A100-692: after an error of installation of Windows XP Prof blue

  Hello

  I bought a new satellite A100-692 with Windows XP Home OEM as an operating system.
  But when I tried to access the internet using the local area network and a Proxy Server, it does not work.

  I tried everything I knew and even ask some Forums to get a response, but nothing help.
  Then I think it can work when I install Windows XP Prof instead of the OEM Version. Because all Clients in our network work fine with it.

  But when I run the Installer (booting from CD) I get a blue screen with the message that there is a problem with the PCI (pci.sys) driver (after loading all the drivers).

  Can someone tell what I need to do so that I can install another OS?

  Thank you

  PS: Excuse me if my English is not very good ;)

  Hello

  First of all, the blue screen error message may appear due to hardware failure or serious malfunction of software.
  In your case I guess that it s a software issue because on the version OEM pre-installed, everything worked properly.

  In addition I checked the site s driver and it seems that there are drivers for 3 different notebooks to A100. In this case, you should be sure that you use the correct drivers.
  As far as I checked this laptop your A100-692 has PSAA9E number.

  But have you created a CD of drivers & tools before formatting the HARD drive? This option you will find in the assistance of Toshiba.

  However, you can download the drivers from the Toshiba site and here it is very important that these drivers will be installed in the right order!
  The chipset utility must be installed in a first time after all installations of service packs.
  The common modules are also important.

• Need Windows XP Prof. with the German language

  Dear friends,.
  I have my laptop in Holland bought.
  My Labtop Windows language is English, but I need Windows XP Prof. with the German language.
  How can I install the new Version of Windows in my Labtop?
  Do I have to buy a German version of Win XP Prof?

  Hello

  I suppose that you bought your laptop in the Netherlands.
  Unfortunately, you need a German original version of Win XP.
  After new Win XP installation, you can download ad install all necessary Toshiba drivers from the Toshiba download or the tools & utility cd page.

  Good bye

• Blue screen of death after I intalled Windows XP Prof

  OK Let's go I hope someone can help me! I have sinned in the eyes of Lenovo and deleted the partition of Nova Scotia on my Y710 and installed a dual boot XP Prof and Windows Vista Bussiness system not on different partitions, but on separate hard disks, I added an another 160gig hard drive to my system. I had to do this for reasons of bussiness log on my server of bussiness and like you all without TEACHER XP and Vista Bussiness and above can log on to a domain server, but now I have a problem with the two operating systems Vista Buss is very slow on the network and my biggest problem is Windows XP Prof who after a few minutes after it starts throw a blue screen and restarts just with a critical error message that this is the case whenever I keep on reinstall, but nothing seems to help. Please help guys I need this phone to work as my job become more behind whike I am struggling to untangle the computer I'm realt desperate at this point.

  Thank you so long

  Concerning

  Martin

  Hi skripatch

  Thanks a lot for trying to help, but I think I found the problem. The culprit was Norton Internet security 2008. I uninstalled and so far for the last two hours my computer has not crashed again. Maybe you can me why Norton will do and if it is possible that it was incompatible with one of the drivers of Lenovo. Another thing can u sugest a good security program preferably something I can buy and download online.

  Thank you

  Martin

• Windows host process (Rundll32) has stopped working

  Is a general Vista problem and also a general problem of Thinkpad, but it has what I feel to be a frequency among the W500s so I thought to post it here.

  In recent weeks, I got this error (Windows host process (Rundll32) has stopped working) several times. A lot of googleing will tell you that it can be caused by a number of things, for example other video programs, Nero burning software, video codecs and burning software and the ATI catalyst control center.

  For me, uninstalling the ATI catalyst control center and the rest of the correction of the error of video card drivers. Resettlement has reduced. Uninstall them and then only by reinstalling the driver first, then check catalytic Center later after another reboot all reinstalled successfully and also got rid of the error.

  However, two days ago I updated my lenovo Power Manager and after the next restart, I started getting this error again. I tried the trick with video drivers, but this time I was not so lucky. Uninstall them completely is not even get rid of the error. I think only it is the new power manager I uninstalled everything and somehow got rid of the error.

  I'm about to reinstall the power manager and I hope he's not bring error.

  Another thing, I found that can cause this error:

  I'd just do a fresh install of vista and lenovo apps + Manager supply and everything worked. Since I never use the optical drive, I went to the Device Manager and disabled, which gave me the error Rundll32.exe about 60 seconds later, and this caused again Manager power to stop working, even after that it recharges.

  I finally understand that disabling my optical drive Springs somehow this error on me which then also stops Power Manager. The optical drive from the reactivation got rid of the error immediately.

• Change hard drive on R60 with Windows XP Prof

  Hello world

  I habe a R60 with 80 GB HARD drive. It has a recovery of Windows XP Prof on that partition.

  How can I replace this drive with a bigger without losing my recovery XP Prof and the Lenovo software?

  Can I solve this problem with an image of the old hard drive?

  Software whar can I for it?

  Please read this and held is very appreciated

  All CU

  first mark a set of recovery media to start, program, thinkvantage, create recovery media. After having done this, then make a backup of your system using rescue and recovery software and then burn the backup to DVD or store it on an external hard drive.

  Now install the new hard drive, then restore the partition recovery and BONE using disks 3 recovery media that you have created, insert disk boot disks 1 and follow invites it. After you install the new copy of the OS with the drivers, you can recharge your backup from rescue and recovery backups that you burn to DVD or stored on the external hard drive.

• c:\windows\system32\powrprof.dll has stopped working or has an error.

  I tried to open a session, but a popeed of message saying c:\windows\system32\powrprof.dll has stopped working or has an error. I'm not sure what this means or what past... I did not any changes to my computer lately.

  How can I fix?

  You forgot to specify what system you use, if it's Windows XP, Vista, Windows 7, or even Windows 98.

  Powrprof.dll library contains functions for Configuration of Microsoft Windows Power Management Tools.

  1. http://support.microsoft.com/kb/q188213/
  Error message: error loading Powrprof.dll

  For Windows 98

  2 powrprof.dll errors might indicate a registry problem problem, a virus or malware.

  If you are using Windows 98, suggest you only look at the possibility of a virus or malware problem.

  TaurArian [MVP] 2005-2010 - Update Services

• Windows 7. But the name of the account user each time before fully loading windows. How can I stop this and simply load in thank you Windows.

  I have just upgraded to Windows 7. But whenever I turn on my computer, he wants to support me on my user account name before completely loading windows. How can I stop this and simply load in thank you Windows.

  Hi UKuser7,

  Welcome to Microsoft Answers Forum.

  Automatic logon is disabled in Windows 7 by default for security reasons. If it is enabled, anyone who can physically access the computer can also gain access to everything on the computer, including the networks that it is connected.

  This setting is only recommended for cases where the computer is physically secure.

  To set up Windows 7 to connect to the desktop automatically, follow the steps below.

  1) click Start , and then enter the following command in the start search box:

  Netplwiz

  2) press ENTER.

  This opens the Advanced user accounts Control Panel window.

  (3) in the users tab, uncheck the box next to users must enter a user name and password to use this computer.

  4) click apply at the bottom of the user accounts window.

  (5) when the newspaper automatically on the dialog box appears, enter the user name for which you want to automatically connect to Windows 7. Then enter your password in the two areas where it is requested.

  6) click on the OK button.

  7) click OK in the window user accounts to complete the process.

  Thereafter, your PC at startup, Windows 7 will be automatically connect.

  Ticket back for your comments and concerns.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Format my old pc with windows xp prof for games

  I would like to format my old pc with legal copy of windows xp prof and maintain your pc for games and old files

  Kindly let me know if I can get the updates before April 8, 2014.

  Hello HKaurND,

  All updates before April 8, 2014 will be always available for download via the Windows updates if you decide to reinstall Windows XP. Thanks to Microsoft to no longer support XP after April 8 you'd be advised to upgrade to a newer version of Windows, i.e. Windows 7/8.1

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I had to replace my hard drive and I only have a disk of windows XP Prof. Update My installation aborts because she wants is a full version. What should I do

  I had to replace my hard drive and I only have a disk of windows XP Prof. Update  My installation aborts because she wants is a full version.  What should I do

  You will need to borrow an installation disc to a former operating system Microsoft - Windows 95, 98 or me. There is no way around it. If person don't you know is an older drive, you can borrow for a few minutes, you will need, you will need to either buy a copy full XP or take the unit to a local computer professional to do the XP installation for you. MS - MVP - Elephant Boy computers - don't panic!

• Can I update my windows xp prof in windows 8

  Can I update my windows xp prof in windows 8

  If you're wondering if there are any free or upgrade price reduced from XP to Windows 8... the answer is no the discount period is over and there was never any option a free upgrade from XP to Windows 8.  So yes, you will need to go to the store and buy a copy upgrade at any price it is sold to.

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• I am trying to install windows XP Professional. Installation stops with error "0x0000007b".

  How to install Win XP on PC with intel i3 processoe running win7

  Hello

  I'm working with a legacy system. My programs to work with Windows XP and more excellent only.

  Now, one day I can not PC with Windows XP we have windows 7 to house high-end system running on the desktop computer intel i3 processor.

  I am trying to install windows XP Professional. Installation stops with error "0x0000007b".

  The new PC with SATA HDD and CD ROM, I was told that windows XP Setup has no support for SATA drives, at the same time if I want to install the drivers, that it seems that for the floppy drive. Thus, it is difficult to install the drives.

  Also when I spoke to Dell Tech support person, he said I can't install Windows XP on the Intel i3 processor. I don't think, but I will this differ from expert.

  Can someone help?

  Hi Steve,.

  You can follow this link & check if the problem persists:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  
  Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  If the problem persists, please ask your question in the TechNet forums for assistance.

  Hope the helps of information.