Windows XP slipstream SATA drivers chipset Z68

Similar Questions

• Re: Satellite U500 - SATA drivers for Windows XP

  Hi people,

  I am trying to install Windows XP on my laptop, I need to download the sata drivers (which should be in the folder display driver). However download my laptop display driver is not the sata drivers in the folder that was specified. Not only that, but it is said to put them on a floppy disk, but I don't have a floppy drive in my laptop.

  any help appreciated

  Hi Samuel23,

  Who said that the SATA drivers in display driver package? This is only the case of the chipset AMD based models and AFAIK all Satellite U500 are equipped with an Intel chipset.

  You can download all the drivers and tools here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  About SATA and Windows XP, you will find hundreds of threads use the forum search to find an answer.

  In addition, this article might be useful:
  [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

• HP 1000 - 1 b 10 AU: install Windows Xp SP3. Can't find sata drivers.

  Hi, friends I want to multiboot windows 7 with windows xp. But I'm unable to install Windows Xp. I get an error. Is the error code: Stop: 0x0000007B.

  I know it's because of sata drivers. But, I can't find drivers sata for installation of windows xp. Model of my chipset Amd is A70M FCH. My computer laptop model No. is Hp-1000-1 b 10 AU.  I want to install windows XP, I like it just want to play some of the very old games I'll be very grateful if someone provides me with the sata drivers. I also tried to change the sata to Ide mode, but there is no option in the bios.  I inherited active mode but it doesn't work.

  Thank you.

  Hello:

  I zipped and tied the XP SATA drivers you need below.

  If you need to know how to integrate the drivers that I have attached a copy of your XP installation media, please read the info at the link below - AMD section and then to read the downloadable document for how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• Equium L40 HDD sata drivers for Windows 7

  Equium L40 17 M (PLS49E) running XP... and I want to install Windows 7 and I need the disk drivers sata HARD turn...
  But I can not find these anywere... I tried the site driver Toshiba and other pilot sites.

  I had the same problem when I wanted to move from Vista to XP
  And found out that I just needed to add the driver for Sata HARD drive in the ISO I was
  I after trying Vista inside drivers

  Then someone knows that are Windows 7 disc sata (Storage Manager) HARD drivers
  or if I can use the Vista ones

  Thank you
  Joepeash

  Hello

  Normally, you can get all the drivers on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I checked the page, and it seems that for Windows 7 not all drivers available. So, as you've already written that you can try the Vista driver because most of them are also work on Windows 7.
  An alternative, you can consult the Intel page. Maybe you can find a newer driver that was official published for Windows 7.

  If you n t know how to use this driver exactly, use the forum search. You will find hundreds of threads. ;)

• Need SATA drivers to install Windows XP Home on my Tecra A8

  I want to downgrade my A8 - 103 to Win XP, but probably will need SATA drivers (and floppy) when installing (F6), but can't find where to download the SATA/RAID drivers for my model?

  Hello

  To my knowledge that the Tecra A8 does not support RAID.
  It supports the interface ATA (SATA) series.
  But these drivers do not exist on the page of Toshiba. The operating system should include the Sata drivers or you'll get it on the Intel page.

  The XP must support all service packs. If your XP includes all the patches and SP, you can create a bootable CD of windows with an application called nLite. Check it!

• Windows 8 Probook 4530 s chipset drivers

  Hello support HP Forum!

  I have laptop Base model.

  I want to switch to Windows 8, Windows 7, but in the drivers section it is not CHIPSET DRIVERS! (NOT IN x 64, x 86)

  Windows 8 must drivers Chipset? And what is my Probook s 4530 will bring them?

  It will be windows 8 support for Probook 4530 s?

  It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence in this forum. It is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Please Turn - it updates optional in Windows Update. This should install it most of the drivers according to the needs. Windows 8 pilots you see on laptop HP ProBook 4530 s - drivers and software page is all the support that should be necessary.

  The laptop HP Probook 4530 s is a class computer business and as such, your questions can better serve in the HP Business Support Forum.

  Please see HP Business Support Center - get help from HP to contact HP with your support questions.

  Please click the White Star of KUDOS to show your appreciation

• HP n278tx do not hibernate and sleep in point 8.1 of Windows + impossible to install the chipset Drivers sp63967 & sp63966

  I have HP n278tx laptop and I recently installed Windows OS 8.1 and now I can not hibernate and sleep my knees.

  When I do that it get stuck.

  And also I can't install drivers chipset provided by HP to Win 8.1 Pro.

  I can not install these 2 drivers. Please help me.

  

  You are the very welcome.

  The reason why you can not put the laptop to sleep or into hibernation is because you need to install the NVidia graphics driver too what this hardware ID.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-133679-1&cc=us&DLC=en&LC=en&OS=4158&product=6967644&sw_lang=

  I don't understand why it not install this driver.

  The only other suggestion I can offer is to see if Windows Update installs the driver.

  Go through the manual steps that above, but this time be connected to the internet, then select the method of automatic update .

  See if windows update detects and installs the Intel Management Engine driver.

• Impossible to downgrade Satellite L305-S5957 for XP with integrated SATA drivers

  Hey everybody. You just bought a L305-S5957 today with preinstalled Vista. I tried to install it on XP with the drivers slipstreamed SATA, but it doesn't seem to work. I always get a BSOD after everything loads.

  I am trying to install the version of XP is Chinese simplified XP with SP3. I tried to "slipstreaming" twice using two different SATA drivers with nLite: v8.9.1023 (last ones on the Intel site) & v8.0.0.1039 (those available on the Toshiba site for my model). Both times by selecting the appropriate chipset (ICH8-M & variants) for integration.

  However, two SATA drivers not and don't seem to not work. What happened after that pilots of trying to load during the installation of XP, I get a BSOD. The BSOD reads: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000). It seems to be the typical BSOD due to the failure to load the SATA drivers for AHCI mode.

  So, what suggestions guys do you have? Should I eventually use "(IDE) compatibility" mode in the BIOS instead of AHCI?

  I really have no idea why it does not work. Many models in the past, I have integrated SATA drivers successfully. It gives me a hard time.

  Thank you.

  Hello

  I guess you used the Toshiba page for download.
  I took a look on the US page and found the Intel Robson Technology Driver for Windows XP (v8.0.0.1039, 31/10/2008; 22 M) and the installation tool XP F6 ACHI (v8.0.0.1039, 2008-10-31, 230 K)

  What have you tried?

  As I know that Intel Robson is a complete package that contains the SATA drivers as well but the F6 ACHI XP installation tool should contain the same files.

  However, you should compare the files in both packages!

  Usually the installation of Win XP using settings AHCI and SATA drivers should always work but of course, you could install Win XP using compatibility mode without the integration of the SATA driver.

  PS: maybe you can try to install Win XP in compatible mode. Then after installing XP, try to install the package Intel Robson and opt for the AHCI mode after that I have not very good if it will work but it s m worth a try!

• Satellite A300-1Affichage (PSAG4E) - can't find SATA drivers for XP installation

  Hello :)

  I am tring to install Windows XP on a Satellite A300-1Affichage as in the object, but it is impossible, because I can't find SATA drivers to install during the installation of Windows XP. In the page drivers I can't find them.

  Can you help me please? Thanks a lot

  Hello

  What is the chipset installed on your laptop? If you post here, I'll try to find the sata drivers. How to decide for you, read here:

  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  You can also install Windows Xp, mode compatible, just switch to AHCI in Bios

• Installation integrated AMD SATA drivers

  Hello!

  A few days ago I wanted to dual boot Windows 7 with Windows XP. Unfortunately, during the installation of Windows XP, I got a BSoD 0x0000007B. After searching for an answer on the Internet I found this guide.

  According to the instructions, I tried to use 32bit_ATI_SB7xx_RAID & AHCI_driver_v9-4_WHQL and sp43839 SATA drivers. Unfortunately, the link provided for the first driver was broken if I slipstreamed only sp43839 SATA driver. The BSoD appeared again.
  

  Of this guide, I also tried the first AMD SATA AHCI Controller driver. That one did not, either.

  I'm trying to find another SATA driver.

  Additional information:

  Name of product: notebook PC HP 655

  Product number: B0Y40EA #BED

  SATA hardware ID:

  PCI\VEN_1022 & DEV_7804 & SUBSYS_1885103C & REV_00
  PCI\VEN_1022 & DEV_7804 & SUBSYS_1885103C
  PCI\VEN_1022 & DEV_7804 & CC_010601
  PCI\VEN_1022 & DEV_7804 & CC_0106

  Hello:

  I recommend you use the XP of the 4545 sata driver of HP Probook.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229464&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_113188_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  I disassembled the driver file and see the hardware ID for your laptop among the hardware ID's SATA controller supported by the driver in the file of configuration information.

  %NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4391&CC_0106
  %NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4392&CC_0104
  %NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4393&CC_0104
  %NapaDesc%=Napa_Inst,PCI\VEN_1002&DEV_4394&CC_0106
  %NapaDesc%=Napa_Inst,PCI\VEN_1022&DEV_7801&CC_0106
  %NapaDesc%=Napa_Inst,PCI\VEN_1022&DEV_7802&CC_0104
  %NapaDesc%=Napa_Inst,PCI\VEN_1022&DEV_7803&CC_0104
  %NapaDesc%=Napa_Inst,PCI\VEN_1022&DEV_7804&CC_0106

• Downgrade to XP (CQ61-403SA) - ask for other Sata drivers

  > When AMD Sata drivers that are presented in the guide not work for then start you ' new message ' on our forum to ask some other drivers Sata for this chipset. Please write there what drivers you used and give information out there about your p/n too.

  Hello

  I'm trying to downgrade my CompaQ CQ61-403SA to XP in order to use a piece of software that we use in the office which is XP only.

  I followed the instructions here to create a disc to start xp for my AMD chipset:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x000000...

  the problem is that the laptop won't boot from this drive (I reorganized the sequence of boot on the computer laptop. it will say "Press any key to boot from the CD"... and when I do it will pass temporarily to a CompaQ red screen before coming back to the same message "Press any key to boot from CD")

  additional information in the CPU - Z program:

  Motherboard:

  Hewlett-Packard

  Model:

  363 42,15

  Chipset: AMD 785GX Rev:00

  Southbridge: AMD ID439D

  BIOS:

  Version: F.13

  Date: 25/01/2010

  Any help would be appreciated.

  1. In Nlite, choose Insert -> multiple driver folder option
  2. Select ONLY x 86 driver for AMD SATA AHCI when asked if you are using a windows xp 32-bit cd
  3. Never choose x 64 driver when asked if youre 32-bit installation cd...

  Click on the star to say thank you...

  Click on accept as solution if my answer has solved your problem

• Downgrading to Windows XP to Vista - drivers CQ40-340TU need it please!

  I just bought a laptop yesterday, Compaq Presario CQ40-340TU. It came with the operating system Windows Vista Starter. Due to limitations with networking, I need to install Windows XP on this laptop now. I have my own installer of Windows XP and cannot afford to buy a different version of Windows Vista, so this isn't an option for me.

  I really hope someone can help me find drivers for Windows XP for the following items. I don't even know if they have the right plug for my laptop model, but I found them on a site selling the same model and HP's product information page.

  I already have nLite and I'm ready to integrate with my installer of Windows XP SATA drivers but I don't know what drivers to include. Please, help me!

  Technical specifications
  Processor Intel Pentium Dual Core T4200 (2.00 GHz, 800 MHz FSB, 1 MB L2)
  Chipset Mobile Intel GL40 express chipset
  Free DOS operating system
  Graphics Intel GMA 4500 Graphics card
  Up to 1759 MB of Intel DVMT 5.0 video memory (64 MB of memory dedicated, up to 1695 MB of shared memory)
  Screen WXGA 14.1 inch Panel high-definition * widescreen
  Memory 1 GB DDR2 800 Mhz
  Housing of 2 memory Slots
  250 GB SATA HDD
  Optical drive Super Multi 8 X drive with Double Layer Support
  10/100 integrated network/wireless implementation high-speed 56K modem, LAN, 802. 11 a/b/g WLAN, Bluetooth
  Integrated 5-in-1 memory slot digital media card reader (xD, SD, MMC, Memory Stick and Memory Stick PRO)
  Webcam integrated i/o, RJ-45, headphone port, microphone, omnidirectional microphones (2), power adapter, output S-video, Kensington lock, VGA, USB 2.0 (3), Rj - 11, HDMI port
  6-cell Li-ion battery
  65W AC adapt Power
  Dimension (Lxwxh) 33,40 cm (W) x 23.70 cm (L) x 3.3 cm H
  Speakers Sound Altec Lansing® speakers
  Approximate weight of 2.29 kg (5.03 lb)

  * edition: profile for www.asianic.com.ph

  I would appreciate a response from anyone... I have not enjoyed my new laptop because of the problems with the networking. Help, please.

  Message edited by JuzAnotherGurl on 03/24/2009 09:33
  Message edited by JuzAnotherGurl on 03/24/2009 09:34

  Rakhmads post should work for you:

  http://h30434.www3.HP.com/PSG/board/message?board.ID=OS&message.ID=6092&query.ID=569151#M6092

  http://h30434.www3.HP.com/PSG/board/message?board.ID=OS&message.ID=625&query.ID=568781#M625

• HP Pavilion DV7-1212TX laptop Downgrade Vista to Windows XP? SATA driver

  Hello

  I want to downgrade this machine because some programs does not work under Vista and it will cost you $$$ to upgrade.

  The problem seems to be that I can't find the right SATA driver to use.

  When I use a WinXP disk, it gives me a blue screen of death.

  I downloaded an update Intel driver pack, integrated in the WinXP installation CD and still have the same screen of death.

  I tried to load Windows XP on a CD (the whole OS on a bootable CD)... and crashed too.

  I think that the drivers I have are too old... but until I know the exact chipset I probably won't understand what I need to install.

  It seems to be no comprehensive manual of the computer, so there seems to be no list of chipsets.

  I had a bit of info from the Vista system... Device Manager but not a full number of chipset.

  Is that what someone has successfully installed WinXP on one of them?

  Can anyone make some suggestions?

  Is there an easier way to get around this?

  :-)

  Hello

  First make Vista beckup. Information how to do it here.

  Now you need to integrate your drivers Sata (only ICH9M-E/M SATA AHCI Controller) with nLite.

  Here is the guide to how do and here are the drivers Sata for you and here are the Sata drivers from your.  Just unRAR it drivers with winrar.

  Remember, also, that you use the Windows XP SP2 version. If you have not got the version SP2 here you can download this service pack

  and here you guide how to integrate this file with your new system of nLite.

  In this program, you can even burn your new XP cd with this driver.

  ____

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  MS-UAA (a reboot before Audio driver required) here

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here

  JMB38X card reader Host Controller Driver here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• SATA drivers to install XP Pro on HP630 via diskette (F6 at startup)

  I have a laptop HP630 with SUSE OS installed. I want to install XP Pro but I don't know where to find the SATA drivers for installation via floppy with the F6 key at the start of the Installation of XP. Where can I find them?

  Renato

  Ciao, Renato:

  You can get them at the link below: XP 32 bit is the second listed download.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 2991 & DwnldID = 20625 & ProductFamily = Chipsets & ProductLine = Chipsets + Laptop & ProductProduct = Mobile+ Intel % c2% ae + 4 + Series + Express + Chipset + Family & lang = eng

  When you are prompted to install the driver, use your up/down arrow and scroll to select and install the Intel (r) Mobile Express Chipset SATA AHCI Controller.

  Paul

• Satellite P100-188: recovery CD will install the SATA drivers on a blank HARD drive

  I was wondering if someone could tell me if my recovery disk would be automatically installs the drivers for SATA HDD on my P100-188, in the case of a hard drive failure total without needing a floppy drive.

  I've never had to use my recovery disc (touch wood), but I have the impression that it works in conjunction with a hidden partition on the hard drive in order to reinstall the operating system if and when necessary, I am not mistaken? If I'm so what happens if the hard drive is destroyed and a new disk? A

  s Windows is not integrated SATA drivers I've read on the Internet that would stop dead in its tracks installation if you do not have a diskette at hand drive.

  Someone had to deal with this problem?

  Hello

  Yes, the restore CD installs everything you need in a single step.

  The point is that the Toshiba Recovery CD is not the same as an original CD of MS Windows. The restore CD contains an image. It s a Pack that included OS Win, Toshiba drivers, utilities and software tools extra.

  So, using the CD recovery will install all the applications mentioned, as well as the SATA drivers ;)

  Welcome them