"This reference VI."

Similar Questions

• 'This' reference confusion

  Hello
  
  It is no doubt on this basis.
  As I run the program to test here, I expect to put it to be:
  
  mainTESTMISC
  SUPERMISC
  TestMisc@19821f
  TESTMISC
  
  
  Class SuperMisc {}
  public String SRC = "SUPERMISC";
  
  public void log() {}
  System.out.println (SRC);
  System.out.println (this);
  System.out.println (this. SRC);
  }
  }
  
  SerializableAttribute public class TestMisc extends SuperMisc {}
  public String SRC = "TESTMISC;
  Public Shared Sub main (String... args) {}
  TestMisc t = new TestMisc();
  System.out.println ("main" + t.SRC);
  t.log ();
  }
  }
  
  
  but the output is actually
  
  mainTESTMISC
  SUPERMISC
  TestMisc@19821f
  SUPERMISC
  
  
  Not that there is something wrong that's going on here, but only that I'm not able to understand it is why the it. CBC is always get the value of the CBC in the upper class. While "it" is the subject of TestMisc and TestMisc has a SRC inside variable.
  
  
  Please help me to understand the reason for this behavior.
  
  Sicard

  It's good because you won't. "it. CBC ' refers to the member named CBC which is visible to the compiler or hereditary, at the point where the text is compiled. It is the base class, because it's where the expression.

  Methods have another mechanism by which substitutions are detected during execution. This does not happen for the variables.

• Switching rows and columns in a formula references

  I have a table in which I report daily productivity of businesses.  Column A contains the date, and the columns B, C and D contain numeric data:

  Date	# contact	New customers	# Commands
  01/03/16	5	2	1
  02/03/16	12	4	2
  03/03/16	2	0	1
  04/03/16	8	3	3

  I have other tables that summarize the date, possibly causing a table for the months that calculates totals:

  Summary of the month	Number of Contacts	New customers	# Commands
  January 2016	47	38	30
  February 2016	82	40	55
  March 2016	80	37	40
  April 2016	85	32	45

  I need to provide a report which is in a standard format of business, with the months all year-round in the line, instead of the column, so the order is reversed:

  2016 metrics report	January	February	March
  Number of Contacts	47	82	80
  New customers	38	40	55
  # Commands	30	55	40
  Telephone canvassing	45	45	48

  QUESTION: in my table ' 2016 Metrics report: B2', I've referenced the monthly summary table, with "= MonthlySummary:B2".  But now I want to copy and paste this reference down in the January column in the table report and the reference of the line past around the table of the month, so that ' 2016 Metrics report: B3' says "= MonthlySummary:C2".  Is there a way to do this?  I'm just trying to avoid having click on each cell in the report table to a reference on the monthly summary table, as there is a lot of data.

  I suggest several things.

  (1) be sure to use a regular convention for your tables to assist in the migration to future years (note the names of the table, I used)

  (2) also use the names of months as shown in column A of the SCT "2016" and in the first line of the company summary

  

  to use the formula to cell B2 in the summary table of the company (for the lower table):

  = VLOOKUP (B$ 1, INDIRECT (LEFT ($A$ 1, 4) &"" Summary: $A:$ D "), CORRESPONDENCE ($A2, 2016 summary: $1: $1.0), 0)

  shortcut for this is:

  B2 = VLOOKUP (B$ 1, INDIRECT (LEFT ($A$ 1, 4) &"" Summary: $A:$ D "), CORRESPONDENCE ($A2, 2016 summary: $1: $1.0), 0)

  Select cell B2, copy

  Select the cells B2 at the end of column M (M5)

  dough

  the last row is all triangles because there is no 'Cold Call' column in the table "Summary of 2016" (the Middle table).  If you add the column with this name, then the data will migrate correctly

• Can I safely remove all references to the CHROME of about: config?

  I was told that once I installed and used CHROME, it took longer for the most part, the operation of any other browser. I removed CHROME better I could, for reasons of confidentiality, but I noticed in FIREFOX about: config many references to CHROME. I want to delete them. What is recommended or safe? Or would I be better to uninstall FIREFOX and download a new copy of it? ... and if so, how can I save my favorites, etc. ??
  Best regards
  Bill Lindquist

  Hello Bill, none of the entries in firefox/a words of: config that contain the term 'chrome' is related to the browser google chrome.

  chrome is a general term used to refer to the user interface of the browser (in contrast to the content - which is usually the information provided by Web sites). This reference is present in firefox long before the competing product with the same name came on the market.

  https://developer.Mozilla.org/en-us/d.../chrome

• Reference QuickTime Movies on Windows PC?

  Now that Quicktime is not a good idea on Windows, how do you manage a sequence of reference created by Quicktime Pro?  I created a couple for my site for years but the reference film (which is the type of file. MOV) can be played with Windows Media 10 built-in Quicktime.  Is there an alternative to forget all these films?

  -Larry

  PS: For the record, here is some info from reading - me created by Quicktime which explains a bit about movies of reference for web sites.

  ----------------------------------------------------------

  You have exported cliffdiversolo_web using QuickTime Pro. The following information will help you publish this movie to your website.

  In the same folder that the file statement HTML, QuickTime Pro has placed different versions of your movie optimized for web-delivery. Also in this issue is a reference sequence, which allows you to select the best version for various devices and your users connection speeds. By including this reference sequence in your HTML page, you can ensure video quality on your site experience.

  ---------------------------------------------

  Of the HTML page generated by the export for the Web of QuickTime Pro used javascript files function special code to call the browser plugin.

  Given that most of the browser plugins are now obsolete, you need to rewrite the HTML code to conform to standards HTML 5 that requires no plugins.

• Get the reference to object to new

  Hello

  I'm testing a few notions of running in parallel of the different tests in parallel on a single Instrument. The idea is to start multiple tests as sequence called for further discussions as in the ParallelExecution.seq example provided with the test bench. The wait later in the code function also has the option 'Specify by reference to the performance object', but I haven't figured out but how get this reference...

  Is there an easy way?

  See you soon

  Oli

  Oli,

  simple answer. When the configuration of the SequenceCall step to "New discussion", the "tool button" next to the right of the combobox control is enabled (sequence call Advanced Settings).

  Press the key.

  Norbert

• How to determine the strict reference to the table of waveform

  Hello

  I want to change the properties of a waveform by programming. I used to get all references maps of waveform a function of range in my script VI VI. Then I typecasted references to more specific class (strict-single track) after this trial I was able set properties such as data history. Everything works fine but if I add a graphic that is multiplot, that this approach does not work.

  The problem is that in the table of references, there is reference to a graph in multiplot waveform, and this reference is not possible typcast to the more specific category (strict-single parcel).

  My question is: how to determine if the reference in the table is matching the proper waveform (single or multiplot) charts.

  In the VI attached is a code that demonstrates my problem.

  Thanks a lot for the replies

  Jan

  Thank you for advice. VI point 2 from your answer, I created and it works. The solution is attached.

  If I understand it correctly. I need to know the type of chart to come.

  My first idea was to create a VI in Drop that initializes all the graphics of VI on chart type independently.

  But this solution is fine because I will only use graphics-single plot and multiplot(two elements).

  Thank you

  Jan

• Online zero reference to several points of

  I have several x, y points.  I would like to point there chose 2 and set them to zero as a reference line, then calculate the gap of all other points of this reference line.  LabVIEW has a function that can do this.  Thank you.

  Just do a linear fit for two points and subtract the result from all data points.  See example (quick and dirty and potentially buggy).

• Open FPGA references change to no. target when compiled with executable in time real start

  Hello again you useful forum fans!  I have a problem that I hope someone can give me a hand with.

  I have a project that has a Windows component and a component of the target in real time, that are running on a hypervisor type NI PXI-8110 system.  Communication both sides between them using shared variables.

  On the real-time side, I have four FPGA targets who are reading and writing various analog and discrete inputs and outputs.  I several periods loops which opens a reference to one of the FPGA targets during the first call, then pass this reference in several subVIs that read and write to panels prior to the FPGA.  The loops the FPGA reference thus made available and reuse it in the next iteration through the shift registers.  Each FPGA target has only a single reference open to him.  One of the loops is using the FPGA reference directly and does not pass it in any subVIs.

  It all works very well in the development environment, I can read and control inputs and outputs FPGAS via the front panel of the application of the side Windows.  It also works very well if I start the game real time in the development environment, and run the code of windows as a stand-alone executable file.

  However, when I compile the code in real-time in an executable startup and deploy it to the target, it does not work.  I enabled debugging on the executable, and when I connect to it via the operation-> debug executable in the menu, I see an arrow broken at execution.  Further investigation shows that each of the four open screw reference FPGA is now empty, the text under them is "no target" and the thread for reference on their part to my first Subvi is broken.  I need your help to understand how to operate as it does in the development environment.

  I followed the instructions of these two knowledge base articles to compile and download the bitfiles FPGA on the FPGA target and execute on start or restart:

  http://digital.NI.com/public.nsf/allkb/39795847AC67296D862575FB0046944F

  http://digital.NI.com/public.nsf/allkb/BC513C2A0DC29C89862574BF0002B0B9?OpenDocument

  Open FPGA reference screw are configured for the FPGA to build specifications that I created for each target in the LabVIEW FPGA project.

  I called technical support, NO phone, and yet were able to determine this one out, so additional "brownie" points if you do!  I would offer you the same no detailed screenshot that I have (I can't give more detailed code out because its owner, unfortunately), but apparently the forum doesn't like my image file, as I can't seem to load.

  Please let me know if you have any ideas regarding what is happening!  I appreciate it.

  Jon,

  I'm always up for the challenge.  Have you tryied recompile the FPGA VI that accesses the RT VI?  I also suggest to try and open the bitfile instead of the FPGA VI.  You run in dynamic mode (this is not a suggestion, it's just a question)? There is no difference if you try to open the FPGA VI reference outside the while loop, then past the reference to use inside the while loop without shift registers, then close the reference to the FPGA VI outside the while loop?

  Let me know if these suggestions makes no difference.

• The former World Assembly references

  I created an instrument using NI-VISA driver, and I encountered an error trying to generate a help file for him.  I use c# in VS2008 with VISA 4.6.2 for the driver and file generator help (CodePlex) Sandcastle to generate a release build XML help file.  During construction, I get an "unresolved assembly reference: NationalInstruments.Common, version = 8.7.35.131'."

  The pilot refers to the assembly of the world (8.9.35.108) and the Assembly of NationalInstruments.Common (8.9.35.156); the common Assembly added automatically when I added the World Assembly.  The VISA feature is great - there seems to be no problem with these references.

  The error occurs whenever the manufacturer help try resembles the Assembly of the world (basically whenever there is a member that is accessible to the public of a world - as the Session type).  Using the libraries of reflection on the system I found that the version 8.9.35.108 of the Assembly of the world refers to the version of the common Assembly 8.7.35.131.

  I have attached a simplified example.

  I have confirmed the same behavior on another PC so I don't think it's my installation.  Is there a fix for this reference?  Alternatively, what version of NI-VISA contained the version 8.7.35.131 of the common Assembly?  Worst case, I can install this on my development PC just for builds to help.

  Thanks for your help!

  Hi strimble,

  National Instruments is based on Publisher policy files to redirect requests for NationalInstruments.Common to the latest version on the machine. The problem here is that Sandcastle does not respect these policy files, as shown here. I suggest you copy the former Assembly to your build machine, if you are able to find this on your development computer. If this is not the case, let me know and we can get for you to download.

• Insert references VI in an empty array of objects

  Hi all

  I shopped, but I can't seem to find the answer to this particular question.

  Platform: TestStand 4.2.0 LabVEW 8.6.1.  Customer resists upgrade.

  I am trying to build a list of VI references to a variable of TestStand.  TS is an empty array of references to object called Step.VI_References.

  BT, I take the context of the sequence (from "ThisContext") and read it as an object of property.  I then take this reference and use it with search GetPropertyObject Step.VI_References.  I have a table of references VI (of type TS. PropertyObject) that I am an iteration more to extract each reference.  It is then to be inserted by using SetPropertyObjectByOffset.  See the attached picture for the relevant bit of code.

  My problem is I'm getting an error-17300 - essentially a "NULL pointer unexpected shipping reference" SetPropertyObjectByOffset call - even with just a reference to be inserted.

  It doesn't seem to be a mistake to place else, but whenever I try to access VI_References in table form (using any table API), it gives the same error.

  What obvious (or subtle) thing I'm missing?

  Thank you

  Geoff

  If these are references, you must use SetValInterfaceByOffset instead of SetPropertyObjectByOffset.

  Hope this helps,

  -Doug

• Table, a modified cell reference

  I'm curious to know if I am missing something, or if someone has an eligant way more to capture the last cell changed in a table...

  I thought that this would be an easy value change event by using either the ActiveCell > CellPosition node or the EditPos.  However, I found various problems with the click of the mouse / key press combinations.  The position of the cell doesn't seem to be correct (almost as if there was a lag).  The position of change was correct when entering text, but as soon as a mouse click/tab/return/enter event has occurred, the position of change changed into the new cell.  Then I noticed that the value change event seemed to happen after my key down or mouse click events (although I have not checked if that had to do with the order of my structure of events).

  So I think that I came up with a rather convoluted--despite all the success - method to achieve my goal.  I had to enter a reference to the bunch of rows/columns with the button down event (while ignoring the pressures on the Tab/Enter/Return keys).  Then I used this reference to set an active cell on a value change event.  In this way, just run the code more in depth once.  This efficiency will be more important when executing sequences more involved with a cell change.

  I always did like that:

  

  Compare OldVal, NewVal. For each cell does not output the coordinates of this cell. You can use these coordinates to define the active cell, if you wish. It's the value change event if this happens only when you change the value in the table, not when the mouse clicks. Is that what you are looking for?

• set the configuration of appeal vi for node reference vi call

  As noted in the title someone knows how to set the configuration of appeal vi (load with the appellants, charging for each call, load and store on first convocation) for a vi dynamically loaded via call by reference node?

  Thank you.

  CBR is irrelevant in the present case, since he already receives a VI reference.

  If you use the primitive opening VI refers to open this reference, then the VI will be charged the first time you call the primitive.

  If the VI leaves no memory (and you do not configure it on the way home), subsequent calls to the prim OVR returns the reference to the first VI you have opened. This is equivalent to the load and keep it.

  If you close and reopen the VI reference, it is equivalent to recharge.

  If you use a static reference to the VI, it is equivalent to the load with the appellants.

  Personally, I have all my default subVIs charge with the appellants.

• Boolean (reference), and boolean are incompatible

  Hello

  I have a sub VI who receives a reference to a Boolean input.

  I need this reference to monitor the State of the Boolean input throughout the operation of the Sub VI.

  The entrance is a stop button. The VI is supposed to frequently check the condition of the stop button, and in case it is true, stop its actions.

  I put the refnum class be boolean, as follows (your language may vary):

  

  In order to get the value of the reference, I just click on-> create-->--> the value property node.

  It is the way I learned to get the properties of things.

  It creates one of these smaller blocks of property node.

  However, this value is not usable. When I try to connect it to an OR logical operator, LV complains of incompatible types.

  Aparently a Boolean value (reference) can be compared to a Boolean value.

  That makes no sense to me.

  Could someone there explain please?

  Why is there a difference?

  There is another option available:

  Make a right-click on the reference-> create-> property for the (strict) Boolean class-> value.

  This creates a regular block of property node, with a Boolean value can be used.

  This value is preset to display the correct properties.

  What I got to the entrance of the this thread property node reference?

  Or is this 'connected' to the reference in the same way as the other node 'Wireless '?

  Please see image below which shows the two ways to retrieve the value:

  

  Thank you for your help

  Hi max,.

  your property node type 'A' is not for a Boolean control, it seems to represent a reference as the value.

  Edit: you have created a property node for your reference control. The "value" of this reference control will be of type 'reference' - no matter what the reference should point to. You need to connect cable a property node generic in the palette of functions to your control reference!

  When you want to use 'generic' property nodes: right-click your Boolean control and "create-> reference. For this reference, you can create a control to get a reference appropriate control!

• Shutdown problem reference VI in nested secondary, causing the encountered error 'end of file'.

  Hello

  I'm relatively new to LabVIEW using LabVIEW 8.0 and am having a strange problem.  My program is such that I have a front panel (A), which opens a secondary (B) by a remote control.  This secondary (B) has a button that, when pressed, runs subvi C AND displays a subgroup of experts containing graphical real-time C.vi.  'C', my code uses a reading of file extent express VI to read a text file in a table that is essential to the vi and in the iterations unique VI there is no problem whatsoever, HOWEVER if the C.vi is not properly closed and he's trying to run again, you receive an "end of file" error encountered.  When I run just B.vi and C.vi access like that, I coded "close after call ' and wired this reference to a narrow File.vi VI.  It works as I can repeatedly run C.vi, and no error occurs. However, when I start at A.i and access the secondary B.vi C.vi, I can run successfully the first time, but if I try to run the second time, I get the error "end of file encountered.  I really don't know what the right course of action here is B-> C works fine, but A-> B-> C is not working even if A is not having a single reference to C.vi whatsoever.

  Thank you for your time.

  Well, it was a bit confusing to read, but my guess is that the file pointer is remaining at the end of the file if a kind of close file does not correctly when B is executed inside the A. You said when he is not stopped correctly in this case, then all bets are off if the file is not closed. My suggestion is to ensure the folder is closed correctly (make sure you're not abandonment of the VI, but instead they sent a release message) and if you are not reading files measure but rather use the IO file screws, there is a VI to set the file position. You can set it to 'start' each time before play you.

  It's just a guess, you can post your VI if you can.