Windows XP update to sp3 does not recognize SDHC cards

Similar Questions

• My desktop under Vista 32 built in the card reader for SD cards. It does not recognize SDHC cards. Can I make this happen?

  Y at - it an update or a patch that will leave my built in player of card that was installed to SD cards that will recognize SDHC cards? I am running Windows Vista Home Premium on a Lenovo desktop computer.

  Hi slider638,

  You can see the steps in the link of Lenovo below

  http://forums.Lenovo.com/T5/T61-and-prior-T-series-ThinkPad/SD-card-reader-and-SDHC-card-compatibility/Ta-p/238582

  Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

• 700 - 509nb envy: envy of 700-509nb: card reader is not recognize SDHC cards more

  After working for more than 1 year, today the card reader does not recognize SDHC cards more.

  He does it with Compact Flash cards.

  When the suspension on the device with a USB cable, the photo can be downloaded.

  Strange... someone at - it an idea?

  Simple but more obvious solution: a small card reader...

  Thank you!

• I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D

  Original title: DVD problems

  I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3 are. what patch you referring?
  4. this happens to you with some specific discs?

  Reinstall the drivers for DVD player and check.

  1. click on start > run
  2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  4. When you are prompted to confirm that you want to remove the device, click OK.
  5 restart the computer.
  6. when the computer restarts, the drivers will be installed automatically.

• My flash player has been updated and still does not recognize that its been updated

  My flash player has been updated and still does not recognize that its been updated on sites like facebook. I restarted my computer several times, tried to reinstall the latest version of flash player, active manage add ons and clicked active x (all windows instructions). But while that in facebook, I can't download the images as I used to on my old laptop, its me to download 1 by 1, because it says that I don't have the latest version of flash player, BUT I DON'T!

  Flash Player in Windows 8 is embedded you do not download it and all updates are are through Windows Update. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.

  "When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir

• I have a new laptop with Windows Media Player 10, which does not recognize my MP3 player: this has happened once before and I was able to download Windows Media Player 9. Where is he now and can do it again?

  I have a Samsung YP - U2J MP3 player and until I had to buy a new laptop it worked fine with Windows Media Player 9.  The new laptop comes with Windows Media Player 10, which does not recognize my MP3 player that my COMPUTER recognizes it and says everything is fine.  Can someone help me?

  Hello Amaliada,

  Thank you for your message.  We will add your MP3 device manually.  Please follow the instructions below:
  Plug in your mp3 player and open Windows Media Player.
  Click in the empty space (next), then select 'Tools' > select 'Options '.
  Select the "Devices" tab (you see yourself mp3 palyer?) If not, click on "Add" > select "portable music players.
  From there, you will receive information about the addition of your device.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

  My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

  Hello

  I see nothing unusual, except that there should be a "0001", or even "0002"...

  When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

  Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• ASUS Tablet does not recognize SD card

  My got transform TF 101 does not recognize micro SD cards. How can I solve this problem?

  Hi, Odiec,

  You have the software express gate on the system?  Update of the software

  http://support.ASUS.com/search/KDetail.aspx?SLanguage=en&no=80E22F30-B3FF-1DFE-9DFB-5CED63C0B176&t=2

  Put the card in the slot

  Restart the computer

  Now the system does not recognize the card?

  You formatted the card?
  https://www.sdcard.org/downloads/formatter_3/

• Photoshop does not recognize my card 960graphic GeForce GTX

  Hello

  I need help on my graphics (GTX 960). Everything's fine (yesterday until I update an extension called FlatIcon (Fi)). I used it for a long time and nothing wrong. Now, Photoshop does not recognize my card. I updated the driver NVIDIA, photoshop set to run as a high performance with NVIDIA Control Panel, remove FlatIcon extension, reset prerefences (Alt + Ctrl + Shift), increase the size of the Scratch drive (200 GB free now), but without hope. I hope someone can help me solve this problem, thank you 1 million.

  Wood

  Can you have a think when this started.  Could he have when you went from CC2014 to CC2015 for example?  CC2015 makes the best use of the GPU acceleration and seems to be more picky about the material.

  You are not able to check the use of GPU acceleration at all, or simply not advanced drawing mode?

  What driver version are you using?

  FWIIW, my experience with a GTX970 was that I could only use Basic Drawing mode in CC2014, but it suddenly allowed me to set the mode advanced for awhile and then changed me back to the basic mode when I upgraded to CC2015

  353,3 get mode advanced for a short period, but it passed without known reason.

  

  Displays how do you drive?

  You have only a GTX960?

• Vista does not recognize video card

  I recently moved, and after I put my computer my monitor is not a signal. I plugged my monitor on the main port and it came. My computer does not recognize the card in the Device Manager. I opened it and inspected the map for all the Visual problems and plugged it upward and noticed that the fan on the graphics card not working. I then did a full restore of the system, reinstalled the installation CD supplied with the card after you disable the onboard and restarted my computer. Still does not recognize the card and after restarting it on my integrated card. Then, I went into the BIOS and selected PCI-E as my first. So... im out of ideas here, if the fan is still ongoing is not the card still work? I don't have another office to plug it in. Is there another way to know if the card works? Why it can't recognize the graphics card which was working fine before the move? On a side note, the computer was unplugged for 2 weeks during this time, but I don't know why this could be a problem.

  IM using Vista 32 bit.

  Hi Myriam.
  Thank you for visiting the Microsoft Answers forum
  If the fan on the card does not is an indicator that the card is not powered, so the only way to test it is to plug it into another machine to see if the motherboard is not giving power or is the card that is bad. You can also try to plug a PCI-E device and see if it has power.

  You have all the cables connected directly from the power supply to the graphics card?

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• After you have installed the Windows updates, my computer does not recognize that there is a disc in the DVD - ROM thing

  I had this problem for weeks and only recently someone told me that it is perhaps for this reason.
  I tried several things to fix, and one of those who created an error where when I clicked on drive E in Windows Explorer, it looks like:

  E:\ application not found

  So, in the end, I wiped my computer and everything on it and rebooted again.

  IT TOOK FOUR HOURS.

  So, I've set up the computer as I did when I got it 2 years ago, and everything was fine. I could insert a disc, it reads that and I was able to install my game, no problems.

  Now, I have reset everything up, and there are more than 2000 updates to update installed. So I did.

  SO NOW, after all this, which took another TWO HOURS - he does not all disks again.

  I play the Sims 3 - fiercely - and so I tried to re - install all my expansion packs, but it does not now.

  I DON'T want to make that whole process again and install all my games before updating Windows, because I believe, even if I did that, once I've updated, I can't play the game, because my laptop does not recognize that the game disc is there.

  Help, please.

  I spent so much money on these games, and I love them! I don't have the money to buy a new computer.

  I have a Lenovo Ideapad

  Core i5 Intel

  https://support.Microsoft.com/en-AU/KB/314060/en-us

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Windows-8-DVD-RW-application-not-found/d68931e4-82f1-4D04-830d-49478ead5dd8

  Your AutoPlay doesn't work maybe not properly.

• Windows does not recognize my card or my camera drive

  Windows does not recognize my sd card reader or my camera.   I have no problem with all the other devices such as printer, Mp3 player (all) external drives.

  Thank you

  Laurie.

  Hi Laurie,

  ·         Have you tried to connect the card reader on different USB ports on your computer?

  We will check if the following is useful.

  Method 1: Try to connect the flash drive to different USB ports on the computer and check if it helps.

  Method 2:

  Step 1: Try to reinstall the USB controllers and check if it helps.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager. Expand the Bus USB controllers section by clicking on the sign «+»

  c. each of the devices under the USB controller section uninstall by right-clicking on each one, then click on uninstall.

  d. close Device Manager, and then restart your computer. Windows XP re - automatically installs the USB controllers in your computer, so you don't have to do anything further. Your computer is now running properly USB devices.

  Step 2: Log on to the manufacturer's Web site and update the latest chipset drivers and other updates to the device driver.

  See also:

  How to manage devices in Windows XP

• New installation of XP PRO sp3 does not recognize the 500 GB HD

  OK, here are the details:

  System: Computer PORTABLE of Acer Aspire 1700 Pent4, 2 GB of RAM, 80GB (3.5 "full-size, trainee) IDE HD [this is the original HD on this laptop of size important which is designed to use disks 3.5" hard].

  Initial situation: Windows XP Pro (SP3 integrated) installed on HDD of 80 GB and works without poblems. BIOS does NOT show the ability of the intern HD in the BIOS screen. BIOS reports only the model and the serial number of the HD, and there is no options to specify the HD type/format (e.g., MLA, etc.)

  Available: Win XP Pro bootable CD slipstreamed with SP3; It is tested and verified work well to install PC or laptop!

  When running XP Pro on a partition internal 80 GB HD, and when I join a brand new WD 500 GB IDE HD via USB, HD is recognized correctly. I can partition and copy data on the HD 500 GB with no problems!

  When I replaced the old 80 GB HD with the new HD 500 GB HD interning on the laptop, I have the following problems:

  1. I can NOT boot into Windows XP Pro (SP3) which was Ghost on the HD 500 GB of the old 80 GB portable HD it recharges, and if I try the console recovery or secure boot, then the laptop restarts also.
  1B. I have Ghost xp partition to 80 GB HD to a piece of spare HD (40 GB) and replaced the 80 GB with the 40 GB HD and was able to start the laptop without problem. So the problem is NOT related ghost!

  2. I can't perform a clean install of Windows XP Pro (SP3 integrated) because Windows XP Setup recognizes the HD 500 GB GB 131 HD. Therefore, the remaining capacity is not recognized.

  3. I can NOT perform the installation of Windows XP pro (SP3 integrated), even if I have previously partition new HD 500 GB by attaching it to a free desktop PC and use Partition Magic, partitioner of Paragon Disk or other partitioning tools. After partitioning prior, when the 500 GB HD is installed on the laptop (as a trainee HD), then win xp installation lists quality HD of GB 131 and lists the existing partitions as corrupt!

  4. Curiously, if I use Knoppix, Debian, Ubuntu or linux boot CD Mint and start the laptop computer with one of these linux distributions, then the linux installer recognize the HD properly during the phase of recognition of material and later during the phase partitioning HD, the linux system to report a full capacity of 500 GB available for partitioning. In addition, when there are partitions, partitioning linux program then lists these partitions properly as well!

  Considering the 4 points and especially MS Windows XP PRO (integrated with SP3, which should recognize HD with sizes exceeding 137 GB limit - from MS says you must be at least XP SP1 to overcome the size 137 GB limit - and that the different distributions of linux can see the full-size HD 500 GB with no problems) which is exactly the problem with Win XP? Why it does not recognize the full capacity? And how to win xp recognizes a 500 GB capacity, if the new HD is attached to the laptop via USB as an external drive when running XP PRO (SP3) of the 80 GB internal HD?

  so... Can anyone sheds light on the issue with Win XP Pro installation on HD 500 GB IDE?

  Nicely,

  LO

  Hi Palcouk and Doc,

  I think that's the final answer!

  Although, there is a mixture of simple to complex responses to the problem at hand, what it all comes down is that there is a significant difference between the installation of Windows XP and Linux installer program. The XP installation program needs help from the BIOS to deal with HD, and if the BIOS does not support, XP not has no facility to remedy the situation. OTOH, most of Linux new kernels rely on the BIOS for a limited number of extended, but communicate directly with the hardware, in this case, with the HD and therefore manages the material accordingly.

  It seems among users of dual-booting (win/linux) using old PCs, it is a matter of very pretty. What they end up doing is using the first 137 GB that is seen by the BIOS without problem for XP (either as a single partition or divided into several partitions), and the rest of the space is used for Linux because linux has no problem.

  I guess that it really nails the problem with my laptop to a BIOS NON-lba-48-bit!

  Then close this thread as answered or matter who has more to say about this?

  LO

  P.S.: It was very nice meeting you fellows and appreciate all the help and tech expertise.

• Windows Live OneCare restore tool does not recognize my external hard drive USB

  Vista recognizes the external hard drive where I have a stored Live OneCare Backup folder, but OneCare restore tool doesn't like a local disk.

  When I turn on network sharing for the external hard drive, I can get him in the OneCare dialog box, but it still does not recognize a backup folder.

  What kind of folder don't restore OneCare search, one called Windows OneCare Backup or any of the subfolders?

  http://social.Microsoft.com/forums/en-us/category/windowsliveonecare/

  Above is the care Forums a Live.

  http://social.Microsoft.com/forums/en-us/onecarebackupandrestore/threads

  Windows Live OneCare Backup and restore

  They will help you in the Forums above.

  See you soon.

  Mick Murphy - Microsoft partner