Windows8 apps cannot connect to the network

Similar Questions

• Help me to library and apps cannot connect to the network

  I followed all the steps Adobe me but all my Adobe apps still encounter the same problem. One of the solutions is to enter your port number in your browser, then I got the "upgrade required" message Pls help ASAP

  

  Hi Alexl29685103,

  Please let us know if you tried the steps in the following help document to resolve the error "something went wrong initialization library of creative cloud": Solution to the issue: Adobe Creative Cloud Library Panel does not in office products.

  Let us know if that helps.

• "Cannot connect to the network." When you enter the correct password for wireless network

  Hello

  I have the HP Photosmart C7200 all-in-One series.

  This seems relatively insignificant compared to some of the problems posted here, but nevertheless it is a problem.  I have a Verizon FiOS (Actiontec) router.  I am trying to connect to it wireless; the network key is using WPA authentication.  I followed all the instructions in the quick start guide.

  My printer detects my network and application authentication key.  I enter the correct key, the printer is trying to establish a connection, but after about 15 to 25 seconds, I get the error message, "cannot connect to the network.  I know that my key is correct; I connect to my router very well through several laptops, PDA, etc.  I have reset the settings network default manufacturer and tried without success.

  I don't know what kind of trouble shooting I'm supposed to do here.  The printer detects the router (albeit low signal strength) whenever I try to connect, I enter the password each time and I get the error each time.

  Your help is greatly appreciated.

  Edit: I printed the test report wireless network, here are the results:

  Radio on   PASS

  The radio work   PASS

  Ethernet cable not plugged in   PASS

  Network name (SSID found)   PASS

  Security   PASS

  The printer settings compatible with the configuration of the wireless router   PASS

  No filtering   IN CASE OF FAILURE

  Connected   Not work

  The signal strength   Very low

  Other networks detected matching you the network name (SSID)   NO.

  I know this sounds strange, but try changing channel by channel 11 of the wireless router.

• Comments Win XP cannot connect to the network when Cisco VPN works on Mac

  Guest OS (Win XP) on the merger connects to the network, no problem. However, when I start a Cisco VPN on my Mac (not in the guest operating system) and then start Fusion/guest OS, the guest cannot connect to the network.

  I was able to use this configuration for a year on an old MacBook Pro (unibody). Last month, I got a new MacBook Pro and flying over my virtual machine image. I don't check for a few weeks. I'm sure I fly over the image correctly because everything else seems OK or if the IT guys doing something to block my traffic over the VPN.

  Config

  -Fusion - Version 3.1.0 (261 058)

  -Mac - 10.6.4

  So far, I have tried the following

  -started to merge and XP without VPN on Mac - OK (bridge autodetect)

  -launched VPN to work, and then launched Fusion - no network

  -tried ipconfig/release, ipconfig / renew - not always no network

  -tried NAT - do always no network

  Thanks in advance. For any help or suggestion will be greatly appreciated.

  Bernie

  The NAT value and then restart the virtual machine.  Works for me with the VPN client built into a cisco router.

  Do not work the real on 10.6.4 cisco software unless you really need to.

• Windows 7 Pro cannot connect to the network when idle too long (large company)

  We have approximately 75 users on Windows 7 Professional.  About two weeks ago (and the next day, Windows updates have been deployed to all PCs in our outside IT), the vast majority of users (but not all) have started to have a problem in what they can connect first thing in the morning; However, they immediately get an error that are not connected to the network, that network drives can be connected, they cannot access the internet, etc.  A reboot solves problems and the problem will not recur until the computer is left idle during the night.  Our outside IT says that what is happening on several client sites that they manage, but they have no idea of the cause; they are theorizing that it's maybe a botched Windows Update.  I have Windows 7 Pro at home and did not have the problem once.  Any suggestions appreciated.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Cannot connect to the network after updating to iOS 9.3 Beta

  I downloaded and installed the public beta version of iOS 9.3 on my iPhone 6 today. After that, I am unable to connect to the network. I tried to reset the network connection of the phone and have my cell phone operator reset the network connection. None worked. Anyone else have this same problem?

  I was able to solve the problem by turning on "Airplane Mode" for 5 seconds, then shut off again. Everything seems to work fine now.

• Photosmart HP 7510: hp Photosmart 7510 says it cannot connect to the network

  I can still print to the printer wireless to my computer, but when I try to FAX directly from my all-in-one he says that it is not connected to the network.

  When I check the settings, it IS connected.

  I had this printer/FAX/scanner for several years now and never had this problem.  I did not make any changes.

  I have unplugged it & tried... still can't FAX.  But I CAN always print it from my PC.

  Help!

  Hello @dtinstl!

  Thanks for posting on the HP Forums!

  Do to an eFax problem and some HP printers supporting the eFax service there is not much I can help in this regard.  I'll have to refer you to this post with instructions on what is done about this particular issue.

  Please see the message here: eFax explanation

  If you wish you can also contact our HP Cloud Services Department in this respect.  Please contact our Cloud Services at 1-855-785-2777.  If you do not live in the United States / Canada region, please click the link below to get help from your region number.  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• After installing winows xp SP3, cannot connect to the network wireless at home

  My daughter has an old windows xp pc. I have a USB wireless adapter attached to it to our wireless here at home. When I install SP3, the network card does not connect to the network.  I have uninstall xp3 to make it work. I even reinstalled the software for the card after xp3 installs, and it still does not work. What can I do about this problem?

  Go wireless adapter manufacturer and obtain an updated driver, then it should work. If the manufacturer does not, for a search on the Web.

• Cannot connect to the network or perform system restore after installing updates have been

  WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

  I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

  I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.

• Printer cannot connect to the network

  Hello

  I have a photosmart HP 5510 printer - connected to 2 laptops.  Everything worked fine until I finally made a secure network and has not worked since.  I tried add the mac address of the router and all kinds of things and have no idea what to do next. Any suggestions?   I can go as far as to put in my ssid and password in the printer connect but still says 'unable to connect to the network.

  OK, more ideas.  Remove encryption between the router and connect the printer.  From the front of the printer to allow Web Services and see if there is an update for the printer.  Leave it to update.

  When it's done, re - activate the encryption on the router and try again.  It may be a bug in the firmware in the printer (although I doubt - he would have caught in tests).  I still think that his router, but...

• Browsers & Apps cannot connect to the Internet

  IE, Firefox, and Chrome all report a problem when I try to load web pages. Apps cannot access the internet (for example when looking for updates).

  • IE reports: "cannot display this page".
  • Firefox reports: ' unable to connect - Firefox can't establish a connection to the server... ". »
  • Reports of chrome: "unable to access the network."

  I have a NAS on my home network, and even if Windows Networking and Sharing Center can 'see' the SIN, browsers cannot access.

  In the command prompt window, I can ping a number of web sites.

  It comes to my son the laptop which is an Acer Aspire 7750 G-6645 running Windows 7. The problem has been known on his home wi-fi, my home wi-fi and when it is wired to my router.

  I tried the following without success (many of whom are in this troubleshooting thread):

  1. Exact date/time;
  2. Check that the proxy servers are disabled;
  3. Install and run MalwareBytes (no viruses were found, and all the puppies have been quarantined).
  4. Disable Windows Firewall;
  5. Winsock Reset.
  6. Empty DNS;
  7. Specific modification of the DNS server to the IP address settings.

  I hope that someone can suggest additional troubleshooting steps.

  Thank you

  Mike

  I could solve the problem.

  Norton Internet Security has been altered. Although he was not running, it is somehow preventing Internet connections.

  After you uninstall NIS, everything works fine. NIS is now re-installed and everything is working again.

• Z10 blackBerry cannot connect to the network mobile/phone on Z10

  Please, I am unable to connect to the mobile network. cannot make or receive calls.

  whenever I restart the unit on Black berry z10, it resets the date and time of the year 2015 instead of the year 2016.

  It has been a challenge after that my camera has been upgraded to 10.3.2.2836

  Please I need your help

  As a last resort, I would use an autoloader to reload the operating system.  If this does not work after that then it is a hardware failure, or the device is not compatible with the networks in your area.  Assuming that this worked before and suddenly left leads me to believe that it's a hardware problem.

  http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

• com Android.Phone pop-up box message - Moto G 3rd Gen cannot connect to the network and overheating

  "Unfortunately, the process com.android.phone has stopped" this pop-up box keeps appearing, over and over again.

  This error appeared out of no - where, and we have been unable to connect to the phone network since. The phone is also overheat insofar as we could hardly touch the screen once the phone was in a pocket.

  The newtowrk provider has never heard of this error, so I guess it's a thing of the bike.

  Please tell us how to solve this problem.

  Becks_Phone wrote:
  Thank you! I am now in safe mode. Being illiterate, technology that do I then please?

  If the phone works very well in mode without failure, then probably some 3rd party app is the problem. The challenge is to find what app or apps is the problem.

  Mode sometimes course does not help, and a reset is the next step only. Other times in safe mode simply confirms that the phone is physically ok, but there is not point to the actual problem.

  Safe mode is designed to allow the phone to start without any 3rd party of loading applications (not always, but that's the idea) but some configuration parameters can still load, it is not infallible. But it is sometimes useful exclude a hardware problem on the phone.

• Booklet 70CT cannot connect to the network

  I try to connect my CT 70 to an existing network.
  I completed all the steps in the User Guide, but the 70CT says can not lgog in the network.

  Help, please.
  Frank Perkins

  Please don't post twice on the same theme.
  This has been already answered here in the first post you!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24803

• HP Pavilion with Win 10 - cannot connect to the network

  Hello

  I have a HP Pavilion (M2N68 - THE motherbaord) the computer has been upgraded to windows 10 and working fine but something happened and I have no access to the network. Under control panel / network connection, I have a grayed on "Boardband Connection" icon and a "connection to the Local network' who says"network cable unplugged. " Player in an eathernet cable has no effect.

  I also checked in the Device Manager and there is no warning or errors.

  Normally I would check and updated the motherbaord drivers but the original drivers for this PC model are supported only up to Windows 7.

  I don't know that that then check. Please help me ill take what I have to do to re - connect my desktop to my network.

  Thank you

  _Asher

  Hi there @AsherE,

  I hope you find your experience of positive Support Forum!  I understand that you are having problems with any type of network connection to your computer. I'm happy to help you with this.

  Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. HP desktop PC - how can I find my model number, serial number or product?

  When you plug an Ethernet cable, is there a clear link on the LAN adapter and/or the activity light flashing?

  Have you tried another port on the router?

  Are able to connect to your router using another device cable connection or WiFi connection?

  Have you tried another Ethernet cable?

  A power cycle you the router?

  Please let me know when you can.