WindowsUpdate 8024402F error (Windows 8)

Similar Questions

• On Qosmio F45-AV411 errors Windows Update

  Hi all

  Below the discussion with me and the microsoft support on the problem to my laptop.
  What can I do next? Thank you very much.

  Hi Jon,

  Thank you for your response and delayed apology.
  After that I will review the outcome of the System File Checker, it shows that there are corrupted files in impossible to remedy Windows and Windows system files. So the next step is no choice for the repair of Windows and if you have a computer of OEM manufacturer I'm afraid that you do not have to have.

  You should ask the manufacturer of your computer to this Windows repair. If they're going to ask you to make a Windows Recovery please backup all your important files, as he'll recover your computer originally manufacture settings.
  Thank you for your cooperation.
  Your patience is much appreciated.

  Kind regards
  Agung Berbudi
  Online technical support Microsoft South East Asia
  http://support.Microsoft.com

  Dear love, thank you very much for your suggestion. This is the result in the attachment. What can I do next? Thank you very much.

  Best regards, Jon

  Sea, 12/17/08, Agung Berbudi
  From: Agung Berbudi

  Hi Jon,

  Thank you for your reply and appreciate for all information you is provided. As you can see below, your Windows Update failed with the majority two 0x80072ee2 and 0x8024402F error code (AutomaticUpdates software failure Windows Update Sync Client has not detected)

  2008-12-17 02:24:42:647 1248 11 c 0 Misc WARNING: WinHttp: httpRead failed. error 0x80072ee2
  2008-12-17 02:24:42:647 1248 11 c 0 Misc WARNING: WinHttp: DoFileDownload PerformDownload failed. error 0x80072ee2
  2008-12-17 02:26:49:068 1248 11 c 0 Misc WARNING: WinHttp: httpRead failed. error 0x80072ee2
  2008-12-17 02:26:49:068 1248 11 c 0 Misc WARNING: WinHttp: DoFileDownload PerformDownload failed. error 0x80072ee2
  2008-12-17 02:28:50:562 1248 11 c 0 Misc WARNING: WinHttp: httpRead failed. error 0x80072ee2
  2008-12-17 02:28:50:562 1248 11 c 0 Misc WARNING: WinHttp: DoFileDownload PerformDownload failed. error 0x80072ee2
  2008-12-17 02:30:53:412 1248 11 c 0 Misc WARNING: WinHttp: httpRead failed. error 0x80072ee2
  2008-12-17 02:30:53:412 1248 11 c 0 Misc WARNING: WinHttp: DoFileDownload PerformDownload failed. error 0x80072ee2
  2008-12-17 02:30:53:412 1248 11 c 0 PT WARNING: ECP: impossible to download the cab of http://download.windowsupdate.com/msdownload/update/software/dflt/2008/08/1482251_2efbea463be5fa586ebf8f6b1b011fb5451fb501.c ab
  with error 0x80072ee2

  2008-12-17 02:30:53:413 1248 11 c 0 PT WARNING: ECP: this trip contained some optimized updates failed. New number of update = 1, old Count = 10
  2008-12-17 02:31:01:245 1248 11 c 0 PT WARNING: synchronization of updates: 0x8024402f
  2008-12-17 02:31:01:245 1248 11 c 0 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
  2008-12-17 02:31:01:246 1248 11 c 0 Agent * WARNING: could not synchronize, error = 0x8024402F
  2008-12-17 02:31:01:264 1248 11 c 0 Agent * WARNING: exit code = 0x8024402F
  2008-12-17 02:31:01:265 1248 11 c 0 Agent *.
  2008-12-17 02:31:01:265 1248 11 0 Agent c * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2008-12-17 02:31:01:265 1248 11 c 0 Agent *.
  2008-12-17 02:31:01:265 1248 11 c 0 Agent WARNING: customer WU didn't search for the update with error 0x8024402f
  2008-12-17 02:31:01:289 1248 74 c to THE > # RETURN # to THE: research updates [CallId = {B8DB0DAA-4B3A-4F8A-8326-3C2E0C426033}]
  2008-12-17 02:31:01:290 1248 74 c# WARNING: reminder of search failed, result = 0x8024402F
  2008-12-17 02:31:01:290 1248 74 c# WARNING: could not find updates with error 8024402F code
  2008-12-17 02:31:01:290 1248 74 c to THE #.
  2008-12-17 02:31:01:290 1248 74 c# end # in THE: research updates [CallId = {B8DB0DAA-4B3A-4F8A-8326-3C2E0C426033}]
  2008-12-17 02:31:01:290 1248 74 c to THE #.
  2008-12-17 02:31:01:293 1248 74 c to THE setting next detection timeout at 2008-12-16 20:31:01
  2008-12-17 02:31:01:294 1248 74 c time of installation to THE adjustment to THE planned at 2008-12-17 09:00

  2008-12-17 02:31:06:300 1248 11 c 0 report REPORT EVENT: {441E306B-86A2-4302-A25E-BCD097906114} 2008-12-17 + 1100 1 148 101 02:31:01:264 {00000000-0000-0000-0000-000000000000} 0 software AutomaticUpdates failure 8024402f from Windows Update Client sync did not detect with error 0x8024402f.

  And I can see that you can not run the System File Checker and verify the disc because that do not have enough privilege to perform these actions. Now you can try to run the System File Checker and Windows safe mode disc, check

  1. turn off your computer.
  2 turn on the computer and when the POST (Power On Self Test) is completed, press the F8 key until you see Windows advance Options menu.
  3. select Safe Mode, and then press enter two times.
  4. connect to your administrator account.
  5. run the System File Checker, and check the disc.

  May I know the results updating form new account?

  Please let me know the results

  Thank you for your cooperation. Your patience is much appreciated.

  Kind regards
  Agung Berbudi
  http://support.Microsoft.com
  From: Jon Afrizal

  Dear love,

  Sorry Agung, I send you many files, because I sent you the wrong file format.

  Best regards
  Jon

  On Tue, 16/12/08, Agung Berbudi
  wrote:

  Dear Jon,

  This is Budi Microsoft's technical support and I will continue to help you on this question, as Ali Will be absent for a week. Thanks for your response and like to update on the situation. Understand that you may have a chance with all the previous suggestion of my colleague. At this point, I will provide you with another work autour for you to try.

  Initially, please send me your Windows Update log:

  Collect the WindowsUpdate.log

  1. Please click "Start", double-click it to open the Local disc c, navigate to the "C:\Windows" folder, right-click on WindowsUpdate.log and choose "copy".
  2 right-click on the free space of the desktop, choose "Paste".
  When the user account dialog box appears, please click "Continue" if necessary.
  3. a WindowsUpdate.log right click on the desktop, choose "send to"-> "compressed file (zipped).

  Please send these zip files to [email protected]

  Suggestion 1: Run chkdsk /r and sfc/scannow

  1. start (Windows Logo)-> all programs-> Accessories
  2. right click on command prompt-> choose 'run as administrator '.
  3. when the command prompt window displays the type

  Chkdsk /r-> press ENTER, let windows check your hard drive error (follow the procedure until its finished)

  Chkdsk /r - check HARD drive and fix errors, locates bad sectors, and recover readable information

  sfc / scannow-> press ENTER, (follow the procedure until its finished) sfc/scannow verifies the authenticity of the file system and replace the files that have been corrupted.

  Please let me know the outcome of these orders and send me the screenshot of it. If the problem persists, you can run the following suggestion

  Suggestion 2: Create new user account.

  1. Click Start and select Control Panel.
  2. click on user accounts and family safety.
  3. in respect of user accounts, click Add or remove user accounts.
  4. click on create a new account.
  5. Enter the name of the account. Select the account type: Standard or administrator.
  6. click on create account.

  more information on how to create a new user account, please check with mentor or refer to http://support.microsoft.com/kb/279783
  If you have any questions or concerns about the information that I have provided, please do not hesitate to let me know.
  It is my pleasure to be useful and I look forward to hear from you.

  Kind regards
  Agung Berbudi

  First I put t understand why post you the history of all email in this forum.
  I put t think that s useful for everyone here

  However, it seems that the guys at Microsoft couldn't t help and that's why it seems that your Windows operating system is really confused until

  If your OS is confused upward then ONLY reinstall new would be really useful and recommended.

  So take your recovery disk and the operating system to restore to the factory settings.
  Then try to update the operating system.

  Concerning

• When I try to update windows I get this error «Windows Update error 80072efe»

  Hello

  I installed 2 days ago to my new PC windows 7. After the installation is complete, I tried to update windows for the first time and every time I get this error: «Windows Update error 80072efe» I google the error and I saw that a lot of people have the same problem. Most of them had their infected PC but mine is brand new and I don't know what to do.

  Hello
   
   
  I found some articles that should help you solve thi sissue.
  Try the methods listed in the articles below and check.
  
  1 Windows Update error 80072efe or 80072f76
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76
  
  2. you may experience temporary errors related to connection when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error "Windows Media could not find a certificate to connect to the network" when connecting to a secure wireless network with WPA2.

  Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.

  Not Applicable

  Hi StheveOses,

  As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  (Works for Windows XP SP3 as well)

  I hope this helps.

• When I try to open my email on my new desktop, an error window tells me my host server POP3 cannot be found.

  My laptop receives by e-mail very well. Windows confiures my wireless network settings. Problem: when I try to open my email on my new desktop PC , an error window tells me my host server POP3 cannot be found. I have tried everything; network connections, Internet options; etc. I get connection otherwise for the internet Google, Facebook, online banking, but not to my email. I entered my full POP and SMTP addresses, but they are lost for my internet connection LAN, which is automatically set to be managed by Intel. I tried to reconfigure it and tried to find Windows wireless network settings. On my laptop if I lose the connection he asks me if I want Windows to manage my connection. And it does!  Help! I really want to be able to find the network Windows wireless.

  original title: NETWORK WITHOUT WIRE WINDOWS

  Hello

  If you use the internet OK for other things, the problem with Outlook Express (e-mail client).

  Check your server settings and out against your ISP help pages. I've seen cox help pages that involve your incoming server should be pop.east.cox.net (note the absence of the number 3 after pop). The outgoing server may be smtp.cox.net or maybe smtp.east.cox.net.

  Tricky

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• Error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file' when try to play wav or midi files.

  Original title: WMP "can't play wav or midi.

  Using WMP 11 on Windows XP SP3.

  Windows Media Player has somehow forgotten how to play wav or midi files. Doubleclicking either of these file types give an error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. " There is a button 'Close' and 'Web Help' which still informs me, "you met the C00D1199 error message... ". ». Following the advice given nothing less than useful.

  I can easily play these files with RealPlayer or VLC so I don't think it's a driver problem, and it wasn't a corruption right after installing the other players. WMP seems to work OK when playing music or AVI. And there is no harm to hear a sound (wav or midi) in Windows for various system events. Have already uninstalled/reinstalled WMP without result.

  Thanks for your reply.

  I have since determeined the problem comes from an updated codec package I installed a few weeks ago. These codecs were from Shark007 which I believe is a Microsoft MVP. Use the codecs from this site for a number of years without any problems so I did not initially suspect it was the source of the problem. I uninstalled the codec pack and installed K-light package and everything seems to be Ok now. Now, I'll be in contact with the members of this forum.

• Error "Windows can not open installer_msi_win.msi."

  I get the error "Windows cannot open installer_msi_win.msi."  It resembles an association for execution has disappeared.

  I found a msiexec.exe file and tried to associate-but, it did not help.  It displays a message indicating that my run is in the wrong format.

  Note: I do a clean-up recently and deleted all my kb*.log files that were under 2 years old.   I wonder if this is related?

  Whatever it in, how can I get my installation files (installer_msi_win.msi) back to work for me?

  I think these are my updates of Windows and rather important.

  See if its installed. Go in run, type: cmd cmd type: Msiexec/help

  A display window should appear with msi info, otherwise Close cmd.

  Go in run, type: msiexec /Unregister

  Once done, go to run, type: msiexec/regserver

  This must be reinstalled Installer.

• Windows XP - error Windows-No disk but only when a disc is in the drive...

  I get this only when im trying to use a drive, it was working at does very well and ive tried everything I can think of, but nothing works...

  It is of the complete error:
  Windows - no disk
  Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c

  Everyone please PLEASE please help...

  Thank you very much...

  Hello Sweetlilwolf,

  Thank you for visiting the Microsoft answers community.

  I found another thread discussing this issue. Please take a look at this and there is information that has helped other people with the same problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/696fae8f-462F-4e08-8315-1dadc38f02f9

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I installed MSSQL 2005 express Server mgmt studio on my xp machine. but when I open it, giving a small error window, but there is no message in it. Only the OK and the exclamation point is on this window

  I installed MSSQL 2005 express Server mgmt studio on my xp machine. but when I open it, giving a small error window, but there is no message in it. Only the OK and the exclamation point is on this window

  Hello Mohan,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the MSDN forums. Please ask your question in the following forum.

  The SQL Server tools general forum

• How to uninstall microsoft no product which has not been installed good product is intunemp3 (error windows cannot install acsess)

  I downloaded intunemp3 to get music, but it did not work properly so I tried to uninstall the product and all I get is (error windows cannot install acsess, this can happen if the installation program has not been installed correctly) and as it happened I met other problems which I think may be related to the first problem. When I use my system tools to defragment files, it only that Flash and never starts, when I try to download windows updates they fail.even when I try to run a security scan the sas error McAfee has encountered a problem please click Home and try again. can any body out there help me out?

  Thank you

  Donald

  Try to do a system restore: click on start, all programs, accessories, System Tools, System Restore.  Then choose the restore point from when itunes tried to install.  If this does not work, let me know and I can give you another way to do it.

• Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

  Original title: windows search service does not start.

  When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
  It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.

  I no longer need it, I just backed up all my files and re - install windows XP.

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]