Wireless and USB?

Similar Questions

• 7500 has perhaps both wireless and USB connected?

  I purchased a 7500 yesterday and love it so far.  The installation was very easy, but long... Everything installed correctly, but I have a question...  I do a lot of printing of pdf files, which are fairly large (file size).  My previous printer, 6210 HP, print faster than this one.  It seems that there is a long delay for the printer instructions to print...  I thought he was maybe the wireless configuration.  Can I connect directly from my desktop via USB and also have a wireless connection for my laptop and iphone?  I don't want to mess up the settings, drivers, etc...  If this is possible, should what steps I take to ensure the smooth transition?

  Thanks for any help on this matter.

  Yes the printer will support wireless and USB at the same time.

• Wireless and usb connection

  I recently bought an Officejet 6000 / e609 printer.

  My question; is it possible to use the printer wireless on a computer and USB on another computer?

  Thank you

  Sidney

  Yes, it works very well, but why?

• Use wireless and USB at the same time on an OfficeJetPro 8500

  I have a HP OfficeJetPro 8500 Wireless I want to use both wireless to other computers by using the USB connection to the office which is in the same room and the House. Is it possible to do both at the same time? The manual suggests that you connect using wireless or connect USB but says nothing about aid from both. Thank you

  Hello

  Yes, you can do both.

  Install the USB with your desktop computer at the office.

  Install wireless on other wireless devices.  Your other devices should find the OJ Pro 8500 Wireless and connect.  You should be asked the SSID and password on these devices.

  It will depend also on the number of wireless devices can manage your router, so make sure that your router is capable.

• Is it possible to connect Deskjet 3050 wireless and USB a?

  I want to connect via a USB port to a desktop computer and a laptop wireless at the same time. I have this possible? If I connect via a USB port it desconnects the wireless. Is there a way to set it so that it does not happen? Using XP SP3 on the desktop and Windows 7 on a laptop.

  Hello

  I connect my printer in this way, BUT only use one at a time.

  Well, I ran a test in this response and the printer can only know one connection at a time.

  Kind regards.

• Inspiron One 2320 - USB will not recognize Keyboard (wireless and usb keyboard)

  someone help me please... I don't know what is happening to my keyboard wireless (im using the usb mouse). I can not type. fair play/pause, next, previous flight upward, downward and silent flight...

  Personally, I wouldn't because I think that 10 is better than 8/8.1. I would just use a wired USB keyboard and mouse. Your call.

• LaserJet pro M201-M202dw: I can implement a Lasrejet pro M201-M202dw for use with wireless and USB

  How can I set up my Pro M201-M202dw of Lasrejet to be accessible via the USB connection or wireless

  Hello @datfr

  Thanks for posting on the HP Forums!

  I should be able to provide assistance. If your LaserJet is already configured on the wireless network and added to the computer, then all you need to do is plug the USB cable into the computer too.  If the printer is not WiFi yet ensure that USB is not connected and run Setup wireless for printers.  Here is a link about the Configuration the printer to a wireless or wired network for the HP LaserJet Pro M201 and M202 Printer series.

  Let me know how it goes!

• USB adapter wireless and usb 1.1

  A usb wireless adapter works with a usb 1.1 connection? IWant to connect my Vista laptop wireless to an old XP pc with.

  Thank you. Going hard cable.

• hp lazerjet 1100 can be set wireless and usb? Win7

  

  Hello

  It depends of what are you doing, BUT Yes you can set it up as 2 logical printers.

  Kind regards.

• Can I connect to the Deskjet 3050 wireless and LAN?

  I have connected to a new deskjet 3050 by WiFi. My laptop and iPhone worked well. I have an old desk top that has no WiFi. Can I also connect it to the 3050 by LAN? The office is connected to the router by LAN so it mails to my hpeprint but I would like to connect it directly to the 3050.

  Hello

  The HP Deskjet 3050 include wireless connectivity options and USB, the printer does not include any LAN interface...

  The printer connected to your wireless router, connection from the desktop to the same router via an Ethernet connection is sufficient, the type of conntaction used network is not serious as long as both devices connected to the same router.

  Make sure that ethernet cable connected to your router with a desktop computer and run the installation by selecting the wireless connection, the device should be detected on the network...

  If you wanted to can use a USB for PC connection, you can do the same. the wireless and USB connection can be used simultanly.

  Shlomi

• Wireless, lan usb and pci is not installed

  Hi, I just bought a new g001sx 15 HP and installed Windows 7 Professional 64 bit. After you install the operating system of my lan wireless, LAN, USB and PCI devices is not installed, I don't know what to do. installing drivers atheros already tried and it didn't work. I have already inserted an image that shows that some of my drivers are not detected.  Thanks in advance.

  Hello:

  Here are links to the drivers you need...

  First install the amd chipset drivers and reboot.  You want the first file on the Web page.

  This will install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Then, install the beta amd radeon catalyst graphics driver.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  Ethernet controller: DL and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTy...

  PCI device: DL and install driver 1st on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  In order to provide me with the wireless driver which you are interested, please do the following...

  Go to Device Manager and click on the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• Wireless use USB ports locks and prevents the Windows shut down

  Hi all. Faced with this one.

  Computer is the laptop, HP Pavilion DM4 - 1150ca. 4 GB of Ram, 150 GB HD

  OS Win 7 Home Premium 64-bit, SP1 and latest updates installed

  Problem: I have 3 ways to connect to the internet: 1 Dongle USB (Device Manager calls "Remote NDIS based internet device for sharing". No problem connecting to the network and to the internet with this device. 2. built in WiFi adapter, "Intel Centrino Wireless - N 1000 and 3. External antenna for high power USB and USB «Realtek RTL8187» adapter Medium 1 and 2, I can normally connect to the network, get decent speed but he declines quickly and then to a random period, usually within a few minutes, I lose my internet connection, and finally my network shows disconnect icon. At this stage all 3 of my USB ports are locked up, removal of the WiFi device does nothing, don't disconnect sound and no USB device is recognized if I try their connection. In addition, Windows will not stop. I get a "shutting down" screen but it stays that way until the expiration time and finally restarts, screen asking if I want to start normally or in safe mode.

  Action taken:

  Several online sites checked and tried solutions including:

  RTL8187 uninstalled and reinstalled several times

  Uninstalled and reinstalled HP wireless several times

  Deleted (Device Manager, see all) entries while grayed, unused network

  So far, no joy, no change. Anyone have any new ideas? Thanks for any help

  Hi Raven,

  Do you have third-party security programs installed on the computer?

  Basically, if the internet works in safe mode and not works in normal mode, not applications or third-party security programs can be in conflict with the drivers from the internet.

  As a solution, I suggest to uninstall the anti-virus program and check if it works in normal mode.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Answer with the results so that we can help you even the question.

• Ay019tu HP: HP ay019tu Wireless and blutetooth drivers

  Hello

  I installed Windows 64 bit edition ultimated. I have all the drivers for HP ay019tu HP Web site only.

  But wireless becomes active. Need help with the correct driver. I have widnows 7 OS only with me. cannot switch to other OS.

  Note- It worked very well on "ubuntu"

  

  Details of the pilots

  USB\VID_0A5C & PID_216D & REV_0112
  USB\VID_0A5C & PID_216D

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_804A103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  Hello:

  You need these drivers wireless and bluetooth for W7...

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72879.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72617.exe

• HP Photosmart D110 - wireless and wired to installation - at the same time

  PLEASE READ CAREFULLY THAT NO MATTER HOW MUCH DETAIL I SAY QUESTIONS. IF ALL OF THE OTHER INFO. IS NEDDED IT PLEASE LET ME KNOW.

  Hello community I am undergoing, step by step, how can I set up my printer to a network via Wired and therefore any other device connected to that network can print from it.

  I used to have my printer connected via connected to my main PC, but it soon came the need to print from other places in my house and I remembered that my printer has this great ability, so I wanted to know how, step by step. I tried to put in place by myself, but I couldn't, I myself helped with the HP Solutions and Guides, and somehow, I missed something.

  Details:

  OS main PC: Windows XP 32-bit (it has the latest updates)
  Printer: HP Photosmart D110 one
  Router: Time Capsule from Apple

  I uninstalled the printer from my computer, so don't be any errors.

  Here's the deal, I want to connect my printer to my main PC via Wired (cable), once correctly installed, I want to connect this printer on my wireless (Network Time Capsule), so any other device connected to the network can print from it.

  If someone can take the time to tell me how to do, step by step, with links from HP information. etc if necessary.

  I already know how to set up a static for my printer IP address and all the stuff in IT, so don't worry, everything you say me that I understand it, all I need to know is what to do exactly, but the case is when (step by step).

  Thanks in advance.

  Hello, I noticed that you said 'Network via Wired' and then he said "wireless. I will be happy to help you. Just to let you know, you can't be WIRELESS and NETWORK CABLE (Ethernet). You can be wireless and plug the main PC into the USB cable. So, here are the steps to download the drivers and the connection to your PC (USB) PRINCIPAL and others (wireless).

  Connection to MAIN PC wired (USB)
  1. connect the USB cable from the printer directly to the main computer.
  2 download the drivers from the Web site (http://goo.gl/BVOOg), or if you have the CD.

  Note: whenever you download the software and drivers on the site. Be sure to choose the SOFTWARE from FEATURE COMPLETE.
  1. Select software and drivers
  2. type in the name of the product (click Search)
  3. choose the operating system (click Next)
  4. choose Download (scroll to the bottom for the SOFTWARE of FEATURE COMPLETE)
  5. After downloading the software, it will PULL
  6. it will give you an option on how you want that it connected
  7. you choose USB to the PC of the hand

  WIRELESS NETWORK connection
  1. go into your printer settings
  2. Choose Network
  3. Select wireless CONFIGURATION WIZARD
  4. it will search your router (if wireless). Choose your router and configure the printer wireless upward.
  5. go to other computers and follow the steps above to download the drivers.
  6. when it comes to SELECT connection, choose (without wireless/network)

  In this way, you can print from your main PC via USB (wired) and the other wireless computers.

  If your ROUTER is not wireless, and you can only use a wired (Ethernet) network, then you can print only by plugging the cable ETHERNET router to any PC of your choice print from the moment. Also to plug another cable from the router to the printer.

  I hope this helps, if you need more help please ask, thank you.

• Linksys wireless-G USB wireless network monitor

  I have a home desktop computer I recently purchased at my friend that everything was already on the computer when I bought there including linksys wireless-G USB Wireless network monitor and I don't know much on the network or the settings of all but I not the reason why it is installed on a home desktop computer when im not not with wireless connection. I would like to know if it binds another computer to mine than in sharing or something?

  Hello

  Linksys Wireless Network Monitor is a software provided by Linksys. If you do not have a Wireless Linksys router/adapter, you can safety uninstall the same.

  For further assistance on issues related to Linksys, please contact Linksys.