Wireless AP and question WLC

Similar Questions

• Question about wireless, routers and network adapters... hope is the right place for the?

  I have a modem to my cable service and I was told that I could network 4 (3 desktop computers and 1 laptop) computers. I plugged the modem, I plugged the router up... i put in the disc of the cable operator to make the wireless network and it does not connect them for some reason any. the cable service representative didn't tell me, I would need something more, but would need one of these network adapters wireless that goes into the USB port on the back? the computer on which the modem is hung up works fine... it's one of those self install the things I told them that I'd rather have a tech cling to me but they insisted that I could do... (obviously any fool can do, I'm not a fool... I'm just stupid! lol "title =" Smiley Tongue"/ > can someone just tell me if I would need one of the cards or y at - it a way to tell if my computers are ready for the wireless... I have 2 dimension E310 XP media center copmputers... is tehre a way to check whether she would need the adapter or not... hope I explained everything properly...) Thank you bunches! antkaki [renee]

  third time to post my question, don't know why it is being deleted... someone can let me know?  Thanks again

  
  

• Questions about the standard wireless keyboard and mouse on a h8 - 1360 t.

  Hi again,

  I have a h8 - 1360t with the standard wireless keyboard and mouse.

  1. where is information on the blue buttons 'connect' keyboard and mouse?

  2. the mouse has a power switch - do I really have to close each time, or is there a function of inactivity when the system is off?

  3 lets say that I have two exact systems within 5 feet of each other. Will the two keyboards and mouse conflict?

  Looking forward to your answers.

  Thank you

  BJ

  This document will show you how to sync mouse wireless and keyboard if they connect buttons.

  You don't need to turn off the wireless mouse. If you have problems with the batteries run out frequently, it might be useful, but I've never needed to do.

  Two different sets of wireless mice/keyboards are not usually a problem. If there is a conflict, go through the process of connection of each game.

• HP 15 Notebook PC: RTL8723BE/RTL8188ee from Realtek 802.11b/g/n wireless LAN Drivers question

  Good evening

  Twice now, I tried to update my Reltek drivers of local wireless network and the two times once installed and restart over, I can't connect to my wifi.  In order to fix this, I had to reset my laptop to an earlier time before downloading.

  Can you help me? Would affect the lack of drivers updated my ablity for videos?

  Robyn

  Hi there @LuvGSPointers,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you have tried to update your drivers Realtek WLAN and them twice you were not able to connect to the Internet. I'd be more than happy to help conservation of WiFi on your laptop from HP 15.

  Do you get any error messages?

  How are you up-to-date drivers?

  Have you tried to connect by Ethernet?

  Which connects very well?

  Is there a red X on the network adapter in Device Manager?

  You have uninstalled the driver in Device Manager?

  If this isn't the case, please try the following:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on the adapter from Realtek.
  • Click on uninstall.
  • Restart the laptop twice.
  • Reinstall the driver.

  You could also update the driver software in the same way:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right click on the Realtek network adapter.
  • Click on update driver software
  • Reboot the laptop.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems and please include your model number (How can I find my model number or product number?).

  Thank you!

• G3 430: 430 G3 wireless button and unknown hit-and-run driver

  Hey guys,.

  I have a problem with an HP 430 G3, I acquired. I see that I have a unknown hit-and-run driver (ACPI\HPQ6007) and also Simple PCI communications controller (PCI VEN_8086 & DEV_9D3A & SUBSYS_80FF103C & REV_21). If someone could help find me these drivers that would be much appreciated.

  Another question, I guess, it's to do with missing drivers is that the wireless button does not seem to be fuctioning. It's just stuck on the orange light and when I press nothing happens.

  Thank you for your help in advance.

  -Power supply

  You are the very welcome.

  See if this hotkey software allows you to do.

  The case and the wireless works, unfortunately I do not know how to get this to work.

  Normally if the driver for the wireless card is installed, which allows you to turn the wireless on and off using the button (or Fn key).

• Windows XP screensaver no longer works after insalling wireless keyboard and mouse (2000)

  Original title: eve of screen Windows XP stopped working

  I just installed a Microsoft wireless keyboard and mouse (2000) and now my screensaver lights.

  Checked the setting in Control Panel and all looks good.

  Hi Rich 664,

  · What is the service pack installed on the computer?

  Check out the link that mentions on the same question below: the screen saver does not start after the installation of a wireless pointing device: http://support.microsoft.com/kb/913405

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• sometimes (iexplorer or firefox mozilla) wireless connection problem question time on XP Home sp3

  I do not have the AOL e-mail account now, I need to change my email address to the account.  It is a question rather long. 1 tech computer. E Machine W3107 desktop PC. AMD Sempron. Processor 3100 + 1.80 GHz, 1600 MHz FSB, 256 KB L2 Cache, 100 GB ATA hard drive, 1.87 GB of memory; (I upgraded the memory to 512 MB DDR SDRAM) 8 in 1 digital memory card reader, 5 USB Ports, nVIDIA GeForce 6100 PCI-Express Slot available, network 10/100 Mbps Ethernet LAN, Windows XP Home sp3 system, I connect to the internet with 6-AX88772 USB2.0 to Fast Ethernet network adapter. Reason do not use Ethernet adapter was because in the taskbar bar, there was a "Network cable unplugged" warning (internet technician did not want or did not know how) to solve the problem. It's easier and faster just to put the adapter ASIX.    My problem is after about 20 minutes. my connection speed is slower than the previous 56K modem. I have to constantly repair the IP address just to stay online when the settings are set to AUTO FIND the IP address, gateway server and DNS servers. If I set these manuely I am always constantly disconnected and it is a repair click without end for the IP address. I can't play POKER in Facebook or Ant other multiplayer game due to the fact that you can't return to your table in FACEBOOK before you are ejected to the lobby, because you've lost the Internet connection. I get disconnected every 2-3 minutes. It's on a regular basis. So sometimes (not often) I stay connected and stay in touch with extremely quick responses. I ran anti-virus, Malware, Spyware scans (no) (clean). I ran Windows tool of connectivity with different results. When Internet Explorer announces that "cannot display this web site" I run the connectivity program and to halfway through the IE analysis opens the web site. ". The newspaper said "it is Impossible to find something wrong with your connection; The icon in the taskbar says I'm connected. Which is not true because sometimes if I download a fike transfer rate will be reduced to "0" (ZERO) at least a minite before he picks up back at a blinding speed of 3-7 Kbps. I started to hate this wireless connection and have seriously thought about back to Dial-up. At least, it was a constant SLOW. and meadows maddness worse. Both browsers then expire too but Mozilla seems to be a browser faster than IE. This happens at the influx of cutting-edge and 03:00 when internet traffic is very light... Little difference, if any. My Email address has changed from AOL. I don't have access to this account anynore. My current address is * address email is removed from the privacy *.

  Hello

  1. don't you make changes to your machine before the problem?
  2. you have any device near your router that may be in conflict with the signal?

  If so, make sure that devices such as radio, microwaves, mobile phones are kept at Bay.

  In the meantime, I wish that you follow the steps mentioned below.

  Method 1:

  Update your AX88772 6 USB2.0 to Fast Ethernet network card of manufacturer's site and see if it helps.

  Method 2:

  You can also test the problem in safe mode with network.

  If the methods above are little help, you may need to contact your Internet Service Provider for the best help that can be also with slow Internet or abandon the connection.

  Let us know the status of the issue.

• Sound does not work after installing new wireless keyboard and mouse

  I have windows xp Media Center installed the new logitech wireless keyboard and mouse, and now my sound does not work. The speaker light is on, the Device Manager does not show a conflict and said that everything works well, but still no sound. A friend has just installed a new microsoft wireless keyboard and mouse and is having the same problem so I know that's not new equipment. Does anyone else have this problem?

  Hi Red_t,

  Welcome to Microsoft Vista answers Forum!

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to XP Media Center and would be better suited to the Windows XP community. Please visit the link below to find a community that will provide the support you want.

  Windows XP Media Center edition Discussions - http://www.microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?dg=microsoft.public.windows.mediacenter&lang=en&cr=US

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Set up a wireless printer to a wireless network and to a computer with windows 7

  My question is this; I would like to set up my HP 4500 wireless printer to a wireless network and on my laptop windows 7 at the same time. Does make a difference if I put it to the computer first, or the first wireless network?

  Just follow the instructions that came with the printer.    Your computer is required to install the printer, so the work of the computer first would be a good idea.

• Wireless switch and keyboard suddenly doesn't work for many stop button

  I own a lenovo g470, I have problem with my wireless, turn and can not be turn on by using the shortcut key, and my keyboard does not work properly. I just uninstall some games and all of a sudden the button, g, h, esc, arrow and left alt is unusable! Oh God, can someone tell me how to fix this, if I can do my assignment

  Hello love,

  -Have you tried the convenience store? http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the troubleshooter does not help you then I suggest you to re - install the latest chipset drivers, keyboard drivers and check if the problem persists.

  Download the drivers from http://support.lenovo.com/en_IN/research/hints-or-tips/detail.page?DocID=HT072739

  Re-install the latest drivers may help you solve the problem.

  Hope this information is useful. If you have any questions, please let us know.

• Win7 64 bit wireless keyboard and mouse problems

  I am a technician and has decided to declare this, since I've seen several complaints the same issue on the same forums.

  Its a win7 64 bit ultima. the keyboard and the mouse is natural egronomic wireless keyboard and mouse 7000.

  Started having problems about 2 weeks ago

  I've uninstalled and reinstalled the software intellipoint and intellitype.

  Changed the batteries twice.

  resynced several times

  no damage or anything spilt arrived at the keyboard

  a usb cable keyboard and mouse works fine.

  the keyboard and the mouse works fine on another computer with Windows XP. matter of fact, I type this message with the keyboard in question. I think that maybe a released hotfix is giving problems with a keyboard and wireless mouse. Please report it to anyone who is able to check that

  Thank you

  He has been sending codes of keys repeated to the OS or does not at all. but never mind after a day of work, the keyboard and the mouse on another computer with Windows XP 32-bit, he just started doing the same thing. It takes time for it to happen so it looks like a hardware keyboard problem. already reports to microsoft to see if I can RMA if under warranty.

• Wireless mouse and keyboard do not function correctly after Windows Update.

  Original title: question of another wireless keyboard and mouse.

  Is the keyboard model 1. 0 comfort wireless 1045, the optical receiver 3.0 has & optical mouse taken 2.0 supported by Windows 7? They are used to work with XP & my Vista Ultimate Home. In fact, they have worked with Windows 7 for a while. I think that an update (I have no idea of who or what) caused the keyboard to stop functioning. Yes, they are old, but I do not keep up with the Jones, I use what works, until someone thinks that we need another dose of fallout and disables it for me. I'm angry again.

  [Moved from comments]

  Hello

  It seems that you have a problem with performnace of the mouse and wireless keyboard.

  I suggest you consult the following links, which have enough information to solve issues of the mouse and the wireless keyboard.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard.

  http://support.Microsoft.com/kb/838398

  Troubleshoot wired keyboards that do not or only the erroneous characters category.

  http://support.Microsoft.com/kb/258826

  I hope this helps!

• Discussion and questions of piracy

  Recently, I did some research on how to hack computers and wireless networks and I began to realize that most of the results especially when I did research on hacking wireless networks the results, I found talking about ways to do using Linux. My boss at work, who did a course in ethical hacking and also my teacher who hacks into systems (legally) uses a Linux operating system called Backtrack, I start to think that all skilled hackers choose and form in the use of Linux to hack rather than Windows. I am deeply disappointed however, little bias toward Linux to be honest. My question is weather or not, it is true that all hackers you know or heard of Linux and if it is even possible to use Microsoft to hack I'm becoming a bit of a fan of Windows die hard. If it is possible, what hacking software recommend you use with Windows, as I am a little concerned with the amount of malware out there a clever hacker may actually release a hack for Windows program which is actually a Trojan horse or another form of unwanted software. Don't worry I'm this collection piracy of information for educational purposes and trim my practice only systems.

  Hackers can and do use any OS.  As law enforcement officers.  We can advise you on what be related ' piracy'.

  Your best defense must have good malware, firewall and do not click on things that you don't know.

• Wireless keyboard and trackpad malfunction since El Capitan

  Since the upgrade to El Captitan, I turn my wireless keyboard works after almost every sleep system order of the to make it usable again. Otherwise El Cap or any application would react to shots of keyboard with a separate period and, often, repeating only one several times.

  With Yosemite, everything was fine.

  My configuration: trackpad, mouse mighty mouse and keyboard, all wireless, on a late 2013 27 "i7 iMac with 32 GB of RAM, no later than OS X.

  Any ideas?

  There are a number of issues to support why this could happen. Have you tried to reboot the device? Also - are the batteries discharged on the wireless keyboard and the magic trackpad?