Wireless AP-H-Reap vlan mapping changes.
Our wireless access point is AIR-CAP3502E-C-K9 with 5500 WLC. The problem is that H-REAP mapping VLAN the VLAn ID change abruptly and if I checl newspapers, I don't see any downtime on the AP. Please note that to happen randomly and sometimes AP all AP in certain offices. Can someone help me?
HI Eric,.
Which version of ios, you're running on WLCs?
Please check these:https://supportforums.cisco.com/thread/2058870
https://supportforums.Cisco.com/thread/2164452
Concerning
Remember messages useful rate.
Tags: Cisco Wireless
Similar Questions
-
Someone is using this "switchport vlan mapping" in the subway of 3750?
Can I filter the VLAN I want q-in-q tunnel?
Such as specified has never had such a need to recommend this feature for our customers.
As you wanted that a pointer is - it possible I interpreted the feature for you, and how it works.
If you encounter any problem specific to these laboratory tests are expanding so we can help you. As this feature is supposed to work.
And not the 3750 support not Double tagged traffic you want to change the client VLAN using clustering, you can only change the Vlan externally. And you must keep the Vlan internal internal internal Vlan = external.
HTH-Cheers,
Swaroop
-
Wireless HP printer-how can I change the status of the printer from offline to online?
HaymarketRon, ever solve you this? I'm having the same problem...
Separated from -.
Hello
What is the brand and model of the printer?
I suggest you try the steps suggested by Pinaki reducing replied on October 30, 2013 at the following link and see if that helps.
http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Windows-81-loses-wireless-printer-shows-the/46786f18-AC36-48A3-b9cd-c82db68d2a92I hope this helps. Let us know if you have other problems with Windows in the future.
-
Installed new router wireless; don't know how to change the settings of the printer
I just changed the wireless router that has created a problem with printing. I don't know what I have to do to change the printer settings to accommodate the new wireless router. Would be very happy for any help with how to do it. I'm on Windows XP SP3 with a HP all-in-one on a wireless laptop (no wired connection). Wireless router is a linksys. Free trial security AVG 8. Thank you!
@jerrymcampbell, sorry you had a problem given that you got a new router.
You will just need to reconnect the printer to the network again.
What kind of printer you have?
Function of the printer, you can access the network settings on the printer, choose the Setup wireless and connect to the new network wizard.
After that, go to the computer and to update the IP address.
1. click on Start Menu
2. Select all programs
3 select the HP folder
4. click on the name of the printer
5 scroll to the IP ADDRESS UPDATE
-
Wireless connection fails on G10 after changing the motherboard
I had a few problems with my wireless for quite awhile. Basically, whenever I turn on my pc my internet connection fails. I always do an RSP on my wireless connection. Finally, it works. This problem started when a technician has changed my motherboard to another question. Since then, it has changed my wireless card. The problem remains tho. Is there a patch for this?
Hello
Is your wireless network, Intel 2200BG If yes try to download the software for this www.intel.com. It is if you have a connection. Another thing to try is to go to the properties of the wireless card and make sure that the power supply is set to high and the output amplifier is set to enabled.
It could be a mix up with the router by which DHCP not allocate an IP address that is inappropriate. You can go into the router through the admin option and disable this feature. However, you will need to return the laptop an IP address. Click on network connections and click with the right button on the wireless connection properties. You should see the list Internet TCP/Ip Protocol. Double click and assign the IP address manually. You must also enter the other info that can by typing ipconfig in the folder c: / prompt.
HTH
Norskman -
No Wireless Connection and can not only change the router
I have messed around with my router configuration to try to make my NAt type open and somehow messed up the Internet. I set kind of it and now I can connect to the internet if I connect directly to the router but I can't always have a wireless connection and I also can't change the router setting more? I followed the steps back to get my ip address and it used to be 192.168.1.1, but now his 192.168.1.2 I don't know what I please help.
Hi estesblake,
(1) do you get an error message when you try to access wireless internet?
(2) what is the number of brand and model of your router?
Follow the steps outlined in the article below to fix the problem of wireless network connection
Wireless network connection problems in Windows
Regarding router problem check the documentation that came with the device or contact the manufacturer of the device.
-
Cannot print using the printer wireless HP 6500 E 709n after changing of Internet service provider
Original title: I changed my internet company two weeks ago, HP 6500 E 709n since then my printe r series does not work, it has been connected wireless, can you help me.
I changed my internet company two weeks ago, HP 6500 E 709n since then my printer series won 't work. He was hooked on the wireless, you can help me. Must the printer be reconfigured? If yes how to reconfigure?
Hello
Please join Microsoft Community where you can find the necessary information on Microsoft products!
After the change of the internet society, the wireless printer does not work.
Quick questions:
1. are you able to to connect to the wireless network?
2. do you get any error messages when you try to print?
The problem may be with the drivers.
I suggest you to visit:
Solve printer problems
You can get the printer drivers on the site:
Software & Driver Downloads - HP Officejet 6500 Wireless All-- One Printer - E709n in
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3795406
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
How to deploy a mapping changed to production without GUI
Hello
I changed a mapping in the development that I would like to deploy to production. I have no connectivity to the center of design to production. So I need a command line for this option. I know that the plu OMB can be used for this. But do not know the details. Please share some examples of code to move a change in the development of QA and production using scripts.
I'm on OWB 10.2.0.2. I have a module (rptmodule) and the schema of a target (rptdb)
Thank you
Bahri
After some time, I ended up with some steps. Here it is in case it helps others.
1 changes to the mapping using MAP Editor object
2 export the changed in an MDL file mapping object
-Navigate to the directory containing the executable file OMBplus.
CD
/owb/bin/unix -Launch OMBPlus and execute the following at the prompt of the OMB
./OMBPlus.sh
OMBCONN
/ @ : : OMBCC "
". OMBCC "
". MDL_FILE OMBEXPORT '
/TEST_EXPORT. MDL' LOGARITHM NATURAL OUTPUT of COMPONENTS ("MAPPING" " ") PROJECT ' ' to ' /TESTEXPORT. JOURNAL" 3-import MDL to environment target
-copy the file to a temporary location MDL
-connect to the rest of the target
CD
/owb/bin/unix ./OMBPlus.sh
OMBCONN
/ @ : : OMBCC "
". OMBCC "
". -Import of MDL
MDL_FILE OMBIMPORT '
/TEST_EXPORT. MDL' USE logarithm NATURAL of OUTPUT REPLACE_MODE to ' /TEST_IMPORT. JOURNAL" 4 - deploy in the target environment
-create a tcl file say deploy_maps.tcl deployment as below
OMBCONN
/ @[lindex $argv 0]: : [lindex $argv 1] OMBCC "
". OMBCC "
". OMBCONNECT CONTROL_CENTER
TRANSIENT DEPLOYMENT_ACTION_PLAN OMBCREATE.
'DEPLOY_PLAN '.
ADD THE ACTION 'MAPPING_DEPLOY' SET VALUES OF PROPERTIES (OPERATION) ('CREATE').
STANDARD MAPPING "
-
is there a reason a google map which was fixed to the road map view has now converted to the vision of the world? It is not
Zoom in on the location more on a website and we have not changed the file. Thank you!
Hello
I see the question, if I use # 220 in the address, if you delete # it shows the correct view. Could you please change this in your address and publish the site again, and this should solve the problem.
With #.
without #.
Let me know if you have any question.
-
Satellite Pro A200-1F9: problem Internet after the map change Wi - Fi - SOLUTION
Because my previous thread was closed, I have to open a new one just for this.
I solved this problem in this http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix way and as far as I know it comes to BIOS.Now I have the internet connection on my Satellite Pro A200-1F9.
Very interesting solution. Thanks for sharing.
-
Tecra S3 - Intel PROSet/Wireless window does not respond after changing settings
Given that I've updated the driver and the utility Intel PROSet version 9.0.4.17 driver and tool PROSet to version 10.5.0.1 for Intel BG2200 WLAN card to build-in the PROSet tool window freezes every time after that I changed a parameter (for example, by adding a new profile).
Closing the window with ALT - F4 also does not work unless you kill the process in Task Manager.
Is this a known problem or is there any group of fixes for the driver or the Intel PROSet tool available?
Hello
The ProSet utility is a clean product Intel and if there are updates you find on the Intel Web site.
But in my opinion, there is only a corruption of installation.
How do you install this app? Have you removed the old version first?I think that if you want to update the programs, you must always first remove the old version and then after reboot of the new laptop, you can begin the installation of the new version.
You could use additional own program register as a CCleaner. It s a freeware application and it checks the registry for some corruptions.
-
CPU/map change mother fails to start
I've had a rig that was sitting in my garage for a long time which was an old Intel platform and I found some better hardware at home and installed it. The old motherboard was of unknown brand - no marking on the Board of Directors. The new hardware is an ASRock motherboard and AMD Athlon processor. However, installation of the old system of W7 crashes at startup. I put it in a HARD drive which is a different installation - it was previously on an AMD platform similar and that works fine, but I can't get this another installation to work.
I finished the Startup Repair, and which highlighted no errors. However, wouldn't be a problem that the disc is not "basic", but "dynamic"? I think that it can contribute, but the main cause is that Windows is trying to use the old drivers for the Intel processor.
Is it possible to fix this apart from a new installation?
Hello
Unfortunately, because you have changed the motherboard and CPU, specifically the motherboard being a completely different model, to take account of things that have changed is the chipset drivers, validation of the product to cause hardware change key, etc.
If the Windows startup repair does not solve the problem, you will simply have to do a fresh install.
Kind regards
Patrick
-
I live in the Mexico and when I moved here States, when I connected to the internet from my landlord, I think my printer just accepted my new locale and did fine. I just moved a few miles more, have shared with the condo internet new, but the printer does not print. I searched and searched for an answer, but nothing helped. CAVEAT... I only am not at all computer savvy.
Thanks for any help, LindaHi Linda,.
To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:
1. you receive an error message or error code?
2 did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest to run the printer Troubleshooter and check if the problem persists.
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
You can also see the following article for more information:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2: You can try running the following commands and check if the problem occurs and also to see if the printer comes back online after
a. click the Start button, and type cmd in the box start search
b. right click on cmd in the list programs and select run as administrator
If you are prompted for an administrator password or a confirmation, type your password or click continue
c. at the command prompt, type the following commands and press ENTER after each one
net stop spooler
and then
net start spooler
This will stop and restart the print spooler service. If this solves the problem of the printer is offline, please let us know.
-
I recently bought a HP 15-P287SA and does not check in the store if he can realize my router 5G wireless.
I realize now the standard construction cannot connect to 5G, so can I change the WiFi card so I can connect to a signal of 5G?
If so, is there an authorized HP card and driver that you could recommend?
Hello:
Unfortunately, according to the service manual, it is very difficult to get to the card your laptop wireless and it must be performed by an authorized service center or the warranty will be voided. See Chapter 6 for R & R procedures.
http://h10032.www1.HP.com/CTG/manual/c04511833
If you are good to dismantle complex things and interested in the question of the guarantee, then the cards only dual band who will work in your model would be one of the broadcom dual band Wireless N or AC cards. Note: You must have router AC for AC see card Group 5.0 GHz.
You must also make sure that there are two antennas wireless connected to the current map to be updated.
Suggested replacements...
Broadcom BCM943228HMB 802.11abgn 2 × 2 Wi - Fi adapter, card Broadcom Bluetooth 4.0
The AC map would be this...
BCM94352HMB/BCM94352 Broadcom 802.11/ac/867Mbps WLAN + BT4.0 Half Mini PCI - E Card
-
Cisco 871w ethernet and wireless on vlan unique?
Hello, I am configuring a cisco 871w router in a very simple setup using only 1 vlan. I have the configuration of FastEthernet interfaces such that when you plug a client computer into a single, everything works as expected. I am now setting up the wireless part. From what I've read on the internet, I managed to make it appear the Dot11Radio0 interface and the BVI interface. It's a bit confusing to me, but looks like I need the British Virgin Islands to meet the wireless interface in the vlan? I don't know how it works... If someone could it explain to me that would be great.
In any case, the problem is that I can connect to my wireless network, but after authentication, there is no ip address assigned to the client. I don't think I'm filling the interface correctly or something. Windows 7 is for me an icon of yellow exclamation on the wireless icon saying "no internet access.
Here is my config:
Enable
config t
host name [name]
interface FastEthernet 4
DHCP IP address
NAT outside IP
no downtime
loopback interface 0
the IP 192.168.0.1 255.255.255.248
no downtime
pool of dhcp IP LAN
network 192.168.1.0 255.255.255.0
domain name [domain name]
default router 192.168.1.1
x.x.x.x DNS server
interface Vlan 1
IP 192.168.1.1 255.255.255.0
IP virtual-reassembly
IP nat inside
Bridge-Group 1
no downtime
interface FastEthernet 0
switchport access vlan 1
no downtime
interface FastEthernet 1
switchport access vlan 1
no downtime
interface FastEthernet 2
switchport access vlan 1
no downtime
interface FastEthernet 3
switchport access vlan 1
no downtime
output
access-list 1 permit 192.168.1.0 0.0.0.255
the IP nat inside source 1 list the interface FastEthernet4 overload
Bridge IRB
BVI interface 1
IP 192.168.2.1 255.255.255.0
IP nat inside
IP virtual-reassembly
dot11 ssid [ssid]
open authentication
authentication wpa key management
Comments-mode
WPA - psk ascii 0 [ascii key]
interface Dot11Radio0
no ip address
encryption ciphers aes - ccm mode
broadcasting-key change 3600
SSID [ssid]
Bridge-Group 1
no downtime
end
access-list 2 allow 192.168.2.0 0.0.0.255
IP nat inside source list 2 interface Dot11Radio0 overload
Thank you very much for your help!
Hi Cory,.
Try modfying the configuration as below.
conf t
interface Vlan 1
No IP 192.168.1.1 255.255.255.0
no nat inside ip
BVI interface 1
No IP 192.168.2.1 255.255.255.0
IP 192.168.1.1 255.255.255.0
dot11 ssid [ssid]
VLAN 1
no access list 2 only allowed 192.168.2.0 0.0.0.255
no nat ip inside the source list 2 interface Dot11Radio0 overload
interface Dot11Radio0
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge Protocol ieee 1
1 channel ip bridge
Concerning
Najaf
Please rate when there is place or useful!
Maybe you are looking for
-
How to download the preivous FF version
New version of FF is same rendering pages differently and I don't like. How/where can I find the preivous for installation version. I'll use this version until I find another browser to use
-
1. is there an add-on to add a 2nd 'Home' icon in the toolbar?
1. in a previous version of Firefox 3.5.x there is an add-on called Throbber Button 1.1 that allowed me to have a 2nd icon that would take me to the Home Page. Is there a replacement for this app for worm 9? 2. is it possible to colorize the arrows "
-
You just buy the D7000 Nighthawk. Plugged my drive network in him, that I use on the WNDR4500 for centuries and it seems that when using DLNA, the router thinks MP4 files are music files and indeed, it allows only the soundtrack to play, in fact they
-
Drive problem hard "smart hard disk error".
Hello, about 6 months ago, I bought my HP envy m6-1252so, and since then it has been slow til to get totally stuck showing the "blue screen" error message, a month later, I turned on and showed me the message "no device found", then I went where I bo
-
Pavilion 1066EZ M6: M6 Pavilion 1066EZ BSOD
Hello I have a Pavilion M6 1066EZ. The question is sometimes, it freezes or gives BSOD. The strange thing is, he began to do this after it has been cleaned. I cleaned the fan and replaced the thermal paste with Gelīc GC Extreme 2. GPU temp on 7520G i