wireless connection between Mac printer & hp

Similar Questions

• Loss of wireless connection between Mac and Office jet pro 8500 has more

  My printer has been successfully implemented with my mac but loses the wireless connection.

  I'm on OS X Lion (but the same problem happened with Snow Leopard).

  My router is provided by BT Vision.  Also on the original hub is an apple TV and phone 3 handsets.  I don't know what channels to use them and do not know how to find out.

  Network Setup page shows no problem, but the mac cannot connect to the printer.

  Any suggestions please?

  If the printer has a valid IP address (not 0.0.0.0 or 169.254.X.X) then it is always connected to your network.

  If your router is a BT HomeHub, you're not alone.  A lot of people on these forums have had trouble with them and most of them that I couldn't help.

  The only kill-TI-dead solution is to buy a standard router (Linksys or Netgear), attach it to your BT and connect everything to the new router.

• How to set up a wireless connection between my computer windows 7 and my printer?

  Laptop running windows 7 and HP wireless printer.

  What printer wireless HP do you have?

  Is the printer connected to your wireless network and online?

  If so I just used the software provided from HP who asked me if I wanted to connect to a USB port or wireless router. I choose the option Wireless for my HP J4680 AiO device and the software installed the driver appropriate printer and other associated software, IE. Center solutions HP, etc and I could use my wireless printer.

  Click here to download manuals updated, how - to, of, software, drivers, etc for your machine.

  http://welcome.HP.com/country/us/en/welcome-copy.html#support

  If your printer is not connected to your network, you may need to set up a temporary ad hoc wireless between the printer and a PC. Once you do this, you can enter the printer wireless configuration pages and configure the SSID of the network, wireless, encryption type, encryption key, etc.. Also, FWIW, I have set my HP machine with a static IP address to make it easier for me to access any pages of any PC on my network config.

• Officeject Pro 8610: Wireless connection between IMAC and Officejet Pro 8610

  I've had this printer for about 6 months now and was hoping a firmware update would happen to solve the problem but didn't.

  I use the printer wireless for all my devices in the House. My Windows devices connect you to the printer very well and print correctly. But for my main computer, which is a 27 inch iMac running El Capitan 10.11.5, I have to "trick" the printer to print from the iMac. It will not keep a session open between the two wireless.

  To use the printer, I keep a blank sheet of paper on the scanner and then reach over and hit "Copy", which then copies the blank paper. During the copy process, I then print everything that I need to print my iMac and it works fine, but 20 seconds after that work is done, the connection is lost between the printer and the iMac.

  I see a lot of questions about it on the HP Support forums, but no one come up with a Solution from HP. Hard to believe knowing that the company that I work uses HP to support the business and buy huge amounts of material of can solve this problem bit between a printer at home and an iMac.

  Would love to hear that a solution is near, or perhaps you must meet your hardware sales that this printer is not compatible with Mac OS. Would have saved me some money and frustration by buying do not.

  Hello

  The printer is fully compatible with Mac OS X, it is more probably relies yoru router or configuration.

  Uses of the devices Apple Hello to communicate with the printer, these require your router to support such a.

  Some routers do not support such an and some may need to be configured properly for such.

  I order to underestand better capabilities of your router, which is model and yoru router barnd?

  In the meantime go to System Preferences > printers & scanners and click the sign more.

  Click the IP tab, and then select the HP Jetdirect Socket Protocol.

  Type the IP address of the printer in the address bar and click Add.

  Note: you can find the IP address by typing on the Ethernet icon or wireless on the front panel of the printer.

  You can print using the newly created queue?

• D1100 HP all in one wireless connection for Mac via wire

  Can my hp d1100 connect via cable instead of wireless? I often have problems with wireless. I see a stain on the printer to connect a wire. Tried to use a thread 4200 hp, they show no results.

  HI AGMorrow2,

  Here is a link that will show you how to configure your printer for a USB Wired connection using Mac OS.

  Your printer can certainly do that. Let me know if you have problems with the steps in the document.

• OfficeJet Pro 8710: Impossible to establish the wireless connection between my laptop and OfficeJet Pro 8710

  I'm tryng to connect wirelessly between my laptop and printer but I am unable to do so.

  My laptop finds the printer and when I go to add the device I invite me to "Enter the WPS PIN code for your printer". So, I printed out the Configuration Page of the network and it gives me the "wi - fi direct password", which I suppose is the password that is required to establish that it connection (I may be wrong in my explanation). However, when I type the password on my laptop it does not establish the connection. I said "try to add the printer again, or check with the manufacturer for addiitonal installation instructions.

  Any insght and assistance is greatly appreciated.

  Thank you.

  Hello

  You should searh for your wifi network at home and connect your printer and the laptop to the network. Direct WiFi option is really only for configurations that do not have a modem/router.

  You may need to disable the option Wireless directly on your printer to help the wireless configuration.

• Connection between mac and PC

  Why can't connect between computers PC under Windows 7 and Mac computers on my network equipment?

  without knowing what you have tried and this error message you receive, impossible to
  say. site Web as http://www.wikihow.com/Add-a-Mac-to-a-Homegroup might help.
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• wireless connection between House and netbook hub

  My bt Home Hub wireless to my netbook connected very well until my nephew borrowed and place a mobile usb talk, since I received my netbook behind him his does not connect with either my home hub or the mobile connector?
  Help, please! Thank you very much

  Hello Angela,.

  Sorry, the information I gave is for Windows Vista because that is what this Forum has been set up for.

  However, you receive the error done reference Microsoft KB 871122 Knowledge Base article.
  If please click the URL below and follow the steps described in the article.

  871122 KB - error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2 or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122
  
  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. click on start and run, type ncpa.cpl, and then click OK.

  2. click on network connections.

  3. in the network connections, select your wireless connection, and then click on change settings of this connection.

  4. on the wireless networks tab, click to select the use Windows to configure my wireless settings check box.

  To start the automatic Wireless Configuration service, follow these steps:

  1.	Click Start, click Run, type %SystemRoot%\system32\services.msc/s and then click OK.
  2.	Double-click Wireless Zero Configuration.
  3.	In the startup type list, click Automatic, and then click on apply.
  4.	In the service status area, click Start, and then click OK

  Another article to look for troubleshooting:
  313242 KB - how to fix wireless network connections in Windows XP
  http://support.Microsoft.com/kb/313242

  If please reply back and let us know if the article helped with your question or if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer HP Photosmart more B210 loses the wireless connection. with MAC 10.6 and Linksys router.

  From time to time my printer HP PSt + B210 indicates not 'online' in the window of the printer utility and do not print.

  I have spend hours to review what I did in th past and become confused.

  Should I start with the HP utility and make sure that my printer is listed only once in the queue (as is sometimes show 2 forms - for the same printer) OR should I stop MAC PB > router > Modem and then restart in correct, reverse order?

  Given that I need to choose "IP automatically...". ", I used Safari and put the 192.168.1.1 in the address bar and follow these steps, as already suggested.  What would be the clear measures to reconnect my HP printer status online? Thank you very much!!

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• Essentials blocks Connection between the printer and the computer wireless

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  I'm moving your question on the forum of Windows for the hardware and the drivers as you have noticed that the problem is not in MSE.

  -steve

• Get a connection between the printer and router wireless

  I have a printer e-all-in-one HP Officejet 4630 I am trying to install wireless.

  I got when I first installed the printer a few months ago, but have since had to change my password for network security and am now unable to get the printer to accept/meet the new password.

  I downloaded and followed the instructions provided by the tool for troubleshooting HP, without success. I have a DLINK wireless router and use windows 7. Would appreciate assistance.

  Easy things first.  Reset the printer to the factory settings and try to connect again using the Setup Wizard of the façade.  If no joy, temporarily remove the password for the security of the router and try to connect.  If so, go back and add your password.  If no joy, reset the router is by default and reconfigure return, and try again.  Blue wireless light should be lit when connected.

• Photosmart C310 with wireless connection with MAC does not print

  Status, connections, power in ink, etc. everything is OK.  State indicates point printed but paper or envelopes come out blank.

  Remove all the cartridges, remove and reinsert the printhead Assembly.

  Turn the printer off and then back on, and then insert the cartridge when the printer prompts to insert and check to see if that can help you.

• bidirectional connection between mac ox 10.5.8 and HP 5510E

  Printer HP 5510 E just bought. Install the disk on my MAC OX 10.5.8 HP printer driver.  When trying to print I get this error message:

  "The host of the network is busy. retrying in 10 seconds... »

  Thanks for your help.

  I assume that you have installed the printer with a Wi - Fi connection?

  Download and install this: support.apple.com/kb/DL907

  We will restore the print system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• I can't get a wireless connection between my computer and my Deskjet 3055 A. The operating system is Windows 8

  If anyone can help with the above problem, I would be very grateful. I was able to install the proper drivers etc for the printer from the internet, but have no idea how configure the feature wireless for Windows 8. He keeps talking about not entered the key name and the correct network security, but where should we register them and how? I tried using the installation CD, but it kept asking me to connect the computer to the printer via the USB cab so that he could get the necessary information. I did it, but he never had a more so I couldn't continue. I guess I should have seen a screen somewhere, where I entered the network name and security key, but no such thing happened. If anyone knows what to do, I would be very grarteful. Thank you!

  Download the User Guide and the reference Guide.

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&LC=en&product=5224271&

  Read both and follow the instructions exactly to connect your printer.

• I am trying to establish a wireless connection to my printer with my two laptops. I have succeeded with one but can't seem to get the other one connected.

  That connected easily enough.  I'm sure that I'm following the same steps I did with the other laptop, but when I get to the prompt "print test page", nothing happens.

  Hello

  Do both laptop using WIndows XP?

  See the links below and check if it helps.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_direct_printer.mspx?mfr=true

  http://www.Microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx