Get a connection between the printer and router wireless

Similar Questions

• Essentials blocks Connection between the printer and the computer wireless

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  trying to connect a printer wireless via the router and the computer. He won't let that happen. called Canon and they said as essentials of security that blocks by ports not opening. or something like that

  I'm moving your question on the forum of Windows for the hardware and the drivers as you have noticed that the problem is not in MSE.

  -steve

• No communication between the printer and the Red computer on switch flashing printer does on every time I turn it off

  I get a message there is no communication between the printer and the computer. Printer is all-in-one HP Officejet 4315v. Have uninstalled and reinstall the software and unplug the USB port and plug it back. Repeated several times. Still no communication. Exclamation red light next to 'on' and green button 'on' butter is flashing all the time.

  You have a hardware failure of the printer.  Contact the manufacturer for support.

• test connectivity between the FI and SAN

  Hello

  could I do fc fabric interconnect working in changing CF ping and if I could tell me please how?

  and if I couldn't how can I check the connectivity between the FI and Netapp storage

  Thank you

  Make sure that you have enabled the FC zoning to the VSAN profile.

  Ahmed

• Connection between the computer and the external hard drive stopped during the backup

  The connection between my PC and my external hard drive has been accidentally cut while I perform a backup. Since then I reconnected my external hard drive to my computer and come back again.

  Windows continue my back up where it left off, or he adds a new point backup on my external hard drive?

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  I would like to inform you that, if the backup is interrupted and it is asking to start the backup. Then, you will need to perform a new backup.

  Reference: back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  It will be useful.

  Let us know the status, we are happy to help you further.

• RoboHelp5: Connection between the project and subproject

  I have a master project and four sub-projects that all reside in a flat directory; in other words, the main project folder and all subproject files are at the same directory level. Can I combine the projects very well, but when I try to add a hyperlink to a topic in the main project of a subject in one of the subprojects, the link disappears when I compile the main project.
  
  I searched for the answer adobe and found a page describing the 'link between merged WebHelp projects', but the instructions say to put the files from subproject in the main project directory. I keep a set of available test only projects for practical things on without breaking my work today and tried it. I could not create merged using this method in all projects the. The link of the merged project appears in the table of contents, but when I met the main project and seen the results. merged projects appeared.
  
  Any ideas on how I can combine projects * and * create hyperlinks between the master and subprojects? Thank you.

  Ok. It worked, and I didn't have to change the structure of Active Directory or create a master project that is devoid of content. Basically, my project composed of five projects... a master project and four projects that are merged into the hand. All project files are on the same level of directory.

  The key to creating a hyperlink between a subject in a project and a topic in another project is in the table of contents:

  Type the text in the topic you want to turn it into a link
  Derivative of this text
  By clicking on the hyperlink icon in the toolbar
  Next to the link, click on the arrow down and select Remote topic in the menu
  Navigate to the project's CHM file you want and double click it.
  If you get a notification dialog box indicating that the files of theme with spaces may cause remote subject links do not work, click OK (in the future, I will have to create the topic filenames without spaces)
  In the select a remote topic dialog box, select the name of the topic you want to link to, click OK and click OK again.

  I know this is fairly elementary to most of you, but I thought that document my steps might help someone like me who is facing the same situation.

  Thanks again.

  -Travel

• Connection between the monitor and the Studio 1458 laptop seems broken

  After happily using my Dell Studio 1458 for a little over a year, all of a sudden my laptop screen went completely blank (not black, but a sort of grey empty) when I started yesterday. I have reset several times, I let it run and I heard the sounds of standard Windows startup. Since I assumed the laptop worked again very well, and I plugged an external monitor. I am now using the laptop with this external monitor and everything except the monitor to the laptop works very well.

  I can still go to "change screen resolution" and see the laptop screen correctly detected by Windows. I can turn it on by selecting "extend these screens. I can also change the screen resolution on the laptop screen. It's the same kind of gray white whatever I do. Of all this I conclude, there is nothing wrong with the drivers: the more likely culprit seems to be the link between the laptop and the screen of the laptop. Unfortunately I ran out of warranty three weeks ago so I don't know what are my options here. I started to disassemble the laptop to see if maybe I could plug a cable loose once more, but I got cold feet at halfway when I remembered that I had saved not properly all my files.

  Any ideas on how should I proceed?

  Thank you

  Johannes

  This would mean it's time to start trying new parts - cable first.  If that does nothing, try a new inverter (if the screen is CCFL).  If it's backlit by LEDS, try a new screen.

• Help on the portable computer connection on the desktop and router WRT610N

  I just bought a WRT610N and have loaded in my office which is not wireless and connected to my cable modem and the router on the desktop so that I can get the Wi - Fi of my wireless control internal Laptop Dell Insperion 1501.  My laptop shows my network I have install on the desk top and there are 4 bars green connection excellent, but it does NOT connect to the INTERNET.  How can I fix it?    Please help me sooooooonnnnnnnn.   Thank you very much.

  Try this,

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  2.4 GHz wireless settings:

  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... Make sure your wireless connection is st to obtain the IP address automatically.

• between my computer and router wireless connection (vista, premiem windows 7, 64 bit)

  Hey I recently had problems with my connection Wireless between my computer and the router.
  Normally off during the night is not connected to my router or on the internet the next day.

  I have been in close contact to my isp provider and have received a new router and reset my wireless Internet services provider site but I'm still having problems. I have also updated my drivers for my wireless on my laptop Hp G62 and have found that it will not cut when I do not shut down or sleep during the night.

  When you try to solve the problem, it will come back with "problem with the adapter or wireless access point and then asked to disconnect the power to the router. After doing this it will be fine all day.
  I do also to turn a blackberry 9000 "BOLD" and see first thing in the morning if the wireless is connected or not.

  ask for help, here is my last option I have been through everything and had an expert look at my computer where he found nothing wrong with my computer or wireless set up settings.

  any help or advice would be great

  Hello

  1. do you have problems connecting with Windows 7 or Vista?
  2. you remember of any change to your computer before the problem?

  Make sure that there is no interference between your router and your computer. For example. Mobile phones, like the mobile signals could conflict with your router signals and therefore no connection to your computer.

  You can uninstall and reinstall the Device Manager wireless network card.
   
  To uninstall the wireless device manager,
   
  a. Click Start, type device manager in the search box of start and press ENTER.
  b. Locate the network adapters and expand the same.
  c. Select the wireless connection, right click and choose uninstall.
  d. restart the computer, if prompted.
   
  Pilots should settle automatically after the computer restarts.

   

  Now you can install the latest wireless drivers and check if this solves the problem.

• communication between the printer and the computer stops

  Original title: printer problem

  Without rhyme or reason communication between our computer and the printer just stops (often!)   Why?  and how to fix it?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Connection between the laptop and desktop computer

  Hi I have a Tecra 8000 Windows xp pro, is it possible that I can connect the mobile to my PC, which runs on windows xp family, that is the reason for the transfer of material, from one to the other, is there a likely with different windows problem! I have a dvd drive on the laptop, but not on the PC! someone help please.
  cordially aga151

  You need a crossover cable. This cable is designed for a direct connection between two units. The cable is cheap and you can find it in every store in PC.

• No connection between the computer and the digital camera.

  Tried to download from camera to the computer. After I connect my digital camera to the computer using the usb cable, said digital camera looking for a connection. I never get a guess that the cause I can't go any further. What I am doing wrong. I looked in my computer and the camera seems to be there.  First, he tries with this camera. I have a HP and HP M305 camera.

  You send messages in Forum Vista and you're missing to this effect on the experience of the current users of XP.

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  I gave you the original link will show also a lot more updates and drivers for XP also.

  Software & Driver Downloads
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=410648

  To start Devmgmt.msc type device manager in the Start Menu / RUN box.  Make sure that the camera is fixed when you look in the Device Manager.

  Troubleshoot: Windows won't recognize USB hard drive / fix unassigned drive letter
  http://www.TechSpot.com/VB/topic122125.html

• Should which driver I connect to the Linksys E1000 router wirelessly

  I'm all set upward on my wireless network and all my other devices (iphone, tv, ect.) wireless connection.  My HP Pavilion dv6700 connect however no wireless.  My router is a Linksys E1000 and their support team has informed me that it is a problem of HP with their driver.  My driver is current and up-to-date (Atheros AR5007 802. 11 b / g WiFi Adapter).  Does anyone know how to fix this?  Please note that I have tried all the simple fixes, same driver update, it's not as simple as resetting the router or ensuring that my wireless switch is on and emitting a blue light.  If anyone knows how to solve this problem, I will be forever indebted to you and may even bye breakfast you!

  Thank you

  Tim

  Hi, Tim:

  Are you sure you are using the latest driver?

  This is the latest version of the driver and it is supposed to solve connection problems with Atheros wireless adapters and routers Linksys E series:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

  Paul

• Issues of security in the connection between the customer and provider of flex property

  Hello

  I should probably know this, but the customer is concerned about a security problem.  I do not think that

  that is a problem, but its best to ask and be sure.

  In my flex client, I got a dialog box where a user can enter a password.  I then take the password

  and send it to my supplier of the property.  This normal text password, I don't do anything to encode it before sending

  It's on.  Is this ok? I think that the connection is secure, but please confirm this, or should I encode them before you send it?

  Thanks for the info

  Cathy

  Yes, the data Manager API using secure AMF channel.  Even if your plugin called java service, you must use "/.../messagebroker/amfsecure" for the channel of proxy URI as shown in the SDK examples.

• No connection between the camera and

  Nothing happends when I plug in the cable to my Canon IXUS 8601 S camera to the computer.  The camera is OK. Always worked before. I just downloaded the latest version of the Norton virus control,
  What is the reason?

  Nothing happends when I plug in the cable to my Canon IXUS 8601 S camera to the computer.  The camera is OK. Always worked before. I just downloaded the latest version of the Norton virus control,
  What is the reason?

  =======================================================
  Perhaps the following links will propose a few ideas:

  Windows Vista
  How to make photos of
  my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.