wireless connection from the laptop to the tv using windows

Similar Questions

• Office jet Pro 6830: replacement 6830 don't no wireless connection during the implementation using the directions of ink instant

  I received a replacement 6830 due to the print head error. I installed the ink and followed the instructions to install the software. I got to the screen where it searced for my device make the wireless connection and it never "found" my printer. I am not able to connect. Information for install on mine was not clear. I tried to put in some information of the wireless display, and it did not match the format that was requested.

  Now I have a replacement Clipboard because when I try to print, it is not able to locate the printer through the wireless connection. When I go through my laptop to try to connect, I get this message: "Unable to connect with the device selected."

  I have connected the printer to my wireless router on thanks to the function of Assistant, so that is in the printer.

  Hello

  Sorry to hear that you are having problems with the replacement unit.

  Try to remove the printer (or all existing printers) and then add your printer by opening the Preferences tab and then selecting «printers & scanners»

  From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.

  

  I've also included a link here to the guide of the user here that describes the steps of the Wi - Fi page 71 from.

• not able to connect to the internet using windows this

  Client is unable to connect to the internet. Customer bought Netbook with Windows CE. Just bought the laptop which has Win CE and it gets an error on the screen asking him to enter an IP address. Is there a way to fix this?

  Thank you!

  Hello

  You can check the link below on what happened to Windows support this

  http://social.msdn.Microsoft.com/forums/en/roboticscommunity/thread/e5668135-FAB1-483c-A76E-e01782255ec1

• Unable to connect to the internet using Windows Vista Edition Home Premium

  Just installed Windows Vista Home Premium and cannot connect to the internet.  The network card is a Broadcom 802.11n and a code appears who says: device cannot start (Code 10).  Does anyone know how I could fix this problem?

  I think that you don't have the right driver.

  Go to the website of FAB and look for downloads or support and type in your model number and find the driver for the network card.

  Thank you.

  Tech of

  http://www.computerstar.ca/

• I can't open the .jpg files from the desktop using "Windows Photo Gallery" as the default program. They open normally from nowhere elsewhere, but not directly from the desktop. No error, nothing happens.

  If I right click 'open with' open with other programs like IE but not "Windows Photo Gallery". It is not a specific .jpg file, this is all .jpg files. For example... I have a .jpg file in a folder on my desktop, open folder double click, it will open in the "Windows Photo Gallery". Copy and paste the SAME file on the desktop, double-click on, nothing happens. I tried to restart, change the default value of IE, open the file, it opens, by default change to "Windows Photo Gallery" doesn't work... I am confused?

  Hello

  Welcome to the community of Windows Vista answers.

  Method 1:

  This can happen in the database that keeps track of all the photos and videos in your collection is damaged. You can rebuild your database by:

  (1) close Windows Live Photo Gallery

  (2) · Click Start

  (3) · Click on my computer

  (4) · Paste this address into the address field %userprofile%\Local Settings\Application Data\Microsoft\Windows Live Photo Gallery

  (5) · Right-click Pictures.pd5

  (6) click on rename

  (7) · Change the name of the file to OLD_Pictures.pd5

  (8) · Restart the computer and then try to open the Windows Photo Gallery.

  Method 2:
  Try using the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:

  How to run scan SFC

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all of the necessary files any replacement SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  For more information, see the link below.
  http://support.Microsoft.com/kb/936212

  Let us know if this helps

  Concerning
  Anthony.
  

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• 5520 HP usb and a wireless connection at the same time

  I have set up my new 5520 HP with USB connected to my desktop (Vista) for maximum reliability and can print via printer share from my laptop (XP), but I'm obviously missing out on HP web services.  Can I have the USB connection or wireless connection at the same time?

  Hello f1charlie,

  Its new r: YES, because it would be 2 printer icons. One for the USB and the other for the wireless.

  The icon of the printer wireless would be similar to Hp 5520 (network).

  You can set these printer (USB or network) icon to by default.

  But again, every time that you want to print using any application. Click file > print, which will display a dialog box, where, in, you can select the printer icon.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• WIFI disabled on windows vista and cannot wireless connect to the net

  WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.

  All of a sudden I lost my internet connection wireless and I am unable to return.  May be because recent windows update.  Error messages on the wireless assistant say WLAN offshore or disabled.  I have tried every fix.

  In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31).  When I try to update the driver, "Best driver already installed" appears.

  Is there a way to FIX?

  http://support.Microsoft.com/kb/932520

  Read the above re ignore this error message.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Connection from the desktop (Vista) to the WRTP54G via an Ethernet cable

  I replaced my old XP desktop with new Dell XPS One with Vista. The old office was connected to my router (WRTP54G - Firmware Version: 5.01.04) via Ethernet cable and worked like a charm. A new won't recognize this connection - is seen as "unidentified network" with "access: Local only". The wireless connection on the same office works, but I still don't understand why I can't it be connected via cable. My XP laptop is not yet had problems with this Ethernet connection to the router - it recognizes immediately as the connection to the local network and connects to the Internet.

  I suspect there is a problem with the WRTP54G in the Vista environment, because the Ethernet connection started work immediately after I have had bypassed the router and connected the office directly to the cable modem.

  Any help to fix this problem will be greatly appreciated.

  Give the 192.168.15.5 static IP address and the default gateway 192.168.15.1.

  Click on the Start button > Control Panel > Network and Sharing Center - slot, click 'Manage a network connection' - task do a right-click on the connection icon to the Local network and click Properties-on the 'Général' tab, select ' Internet Protocol Version 4 TCP/IPv4 ' and click on the button properties-select "Use the following IP address" - provide the IP - 192.168.15.5, subnet mask - 255.255.255.0 Default Gateway - 192.168.15.1 - favorite DNS 192.168.15.1, auxiliary DNS - 4.2.2.2 > click the Ok button to save and click 'Close' on the main properties window.

• After the HP update cannot connect to the Internet using my ISP wireless

  I have a HP Pavillion15 Notebook PC, Prod #: E7C83AV using Windows 8. Hp yesterday made an update, and subsequently, my computer does not connect to the Internet, using the same network wireless ISP.  Only way I can get Internet is to use the DSL unit to the computer USB cord.  I had a "Configuration for Invalid IP (106)"

  My ISP is still in my system with the same password, and I can't find any reason why it does not connect.  I have all the correct lights on my computer & the DSL unit.  I have not contacted my ISP, do not know what to say "After HP did an update, your service will not work?"

  Tonight I tried to get help from HP, big whoopie, even when I'm in warranty for 9 months, I was transferred to HP/SmartFriends, who told me that I had to pay for the assistance.  It won't happen!

  I don't know what to do now, I'm not very computer savvy and if HP won't help, do not know where to turn now.

  I'm fighting mad now!

  Someone please help.

  Have you tried to restore to previous work image?

• Wireless connection to the network home

  I recently bought a Tecra8200 with free Wi - Fi. I have a XPprof Windows installed on it. When trying to connect to my home network with wireless lan functionality, I am not able to connect to my router Sitecom WL-025. (cables) In exceptional cases, the system does not recognize the wireless network. In two cases only have been recognized my Sitecom and the Belkin to my neighbor. I've only had the SSID for routers. No connection. What settings should I enter to make this thing work with the version of wireless network card?

  Hello

  You can check the router if a MAC address verifivcation is enabled? You have any other PC with wireless connection to the router and look in these wireless settings?

  Goodbye, Meier

• Error: The period elapsed prior to obtaining a connection from the pool in the Windows XP computer.

  Original title: timeout expired.

  I get this question: timeout expired. The period elapsed prior to obtaining a connection from the pool. This can happen because all pooled connections were used and the maximum pool size has been reached.

  It's my code and the problem is maybe the part highlighted.
  Dr. MySqlDataReader = null;

  Try

  {

                  MySqlParameter [] param = New MySqlParameter [] {}

  New MySqlParameter("?_MaxTries",MaxTries)};

  Dr = MySqlHelper.ExecuteReader (ConnectionString, "call ssp_EscalationMails)
  ? _MaxTries) "(, param);"
  List emailList As new List();
  EMailInfo objEmailInfo;
  While (Dr. Read
  {
  objEmailInfo = new EMailInfo();
  objEmailInfo.ID is Dr.. GetInt64 ("EmailToFire_ID");
  objEmailInfo.To is Dr.. GetString ("To");
  objEmailInfo.From is Dr.. GetString ("From");
  objEmailInfo.Subject is Dr.. GetString ("Subject");
  objEmailInfo.Body is Dr.. GetString ("Body");
  objEmailInfo.CC is Dr.. GetString ("CC"); CC is null in DB
  objEmailInfo.Tries is Dr.. GetInt16 ("Tries");
  objEmailInfo.Sent = 0;
  emailList.Add (objEmailInfo);
  objEmailInfo = null;
  }
  SmtpClient smtpClient = new SmtpClient();
  smtpClient.Host = SmtpHost;
  foreach (objMail in emailList EMailInfo)
  {
  Try
  {
  MailMessage mailMessage = new MailMessage();
  mailMessage.To.Add (objMail.To);
  mailMessage.From = new MailAddress (objMail.From);
  mailMessage.Subject objMail.Subject =;
  mailMessage.Body objMail.Body =;
  mailMessage.IsBodyHtml = true;
  mailMessage.Priority = MailPriority.High;
  objMail.Tries += 1;
  smtpClient.Send (mailMessage);
  objMail.Sent = 1;
  mailMessage = null;
  }
  catch (System.Exception e)
  {
  string message = "shooting unique Email.
  + System.Environment.NewLine + e.get_Message () + ":" + Convert.ToString (e.InnerException) + System.Environment.NewLine + "EmailToFire_ID:"+ ".
  objMail.ID + System.Environment.NewLine +.
  "------------------------------------------------------------" +
  System.Environment.NewLine;
  Logger.LogMessage (message);
  }
  MySqlParameter [] uspparams = new MySqlParameter [] {}
  New MySqlParameter("?_EmailToFire_ID",objMail.ID),
  New MySqlParameter("?_Tries",objMail.Tries),
  New MySqlParameter("?_Sent",objMail.Sent)
  };
  MySqlHelper.ExecuteNonQuery (ConnectionString, "call usp_EscalationMails(?_EmailToFire_ID,)
  ? _Tries? _Sent) "(, uspparams);"
  }
  }
  catch (System.Exception e)
  {
  string message = "FireEmails()."
  + System.Environment.NewLine + e.get_Message () + ":" + Convert.ToString (e.InnerException) + System.Environment.NewLine + "-" +.
  System.Environment.NewLine;
  Logger.LogMessage (message);
  }
  Thank you very much

  Hi Swatikurra,

  The question you posted would be better suited in the MSDN forums. I would recommend posting your query in the MSDN forums:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• Failure of wireless connection to the router to the desktop

  I use Windows 7 and a router/modem method. The wireless connection to the internet recently stopped working in my HP Pavilion desktop computer. He still works for my tablet, but I can only connect to my desktop by Ethernet cable. It would seem that the fault lies in my office. The icon in the bottom right of the screen shows the wireless internet available as internet access card. I can't find any disabled dialog box display the Wi - Fi connection and troubleshooting shows no defects with network cards. Does anyone have any suggestions?

  If I understand you correctly, when you click the icon in the system Notification area, you can see a list of the available connections, including the SSID of your wireless network.

  If this interpretation is correct

  • Unplug the Ethernet cable
  • open network and sharing Center
  • Click on the link 'manage wireless network '.
  • Select your network
  • Click 'delete '.
  • Now close the window manage wireless networks
  • Click on the network icon, select your network
  • Click on connect
  • Enter the security password when prompted.