Connection from the desktop (Vista) to the WRTP54G via an Ethernet cable

Similar Questions

• I cannot connect to the Internet via an Ethernet cable but I am able to connect with other devices.

  Original title: deleted Ethernet adapter

  Hello

  All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.
  I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.
  First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.
  I tried to insert Dell drivers and utilities disk, but that does not change.
  I tried to download on an other computer files from dell that look like they are pilots.
  I tried to set up a new connection
  None of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?
  Thank you
  Kevin

  Hello

  1. what you're trying to fix by running registry cleaners?
  2. How did you remove Ethernet card?
  3. How are you online using other devices?
  4. What are the devices are?

  Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Satellite A80: Failure to connect to the internet via an ethernet cable

  I'm having problems to get an internet connection via a cable ethernet to my office. The laptop works everywhere else, but not in the office. The strangest thing is that my desktop at the office computer works perfectly with the same cable.

  The icon in the taskbar of configfree reads "MARVELL YUKON 88E8036 PC... 169.254.95.8"no matter how many times I disconnect and reconnect it to my office. Curiously, the IP Office when it is connected to the same cable is 192.168.1.69.

  I was told to change the tcp/ip properties manually, but I'm not able to do because I have not all entries in the NETWORK CONNECTIONS or can't seem to create a new.

  I would be grateful if anyone has any suggestions.

  Hello

  I wonder why you have no entries for network connections.
  Click Start-> settings-> network connections-> connections to the Local network-> properties

  Select the Internet Protocol (TCP/IP), and then click Properties.
  If you use a server in your office and the IP address is assigned automatically then all TCP/IP parameters must be on automatically

  Check it!

• Canning Internet connection drops when the computer is connected to the PS3 via an Ethernet cable.

  Original title: Shared network problem

  I am trying to use a shared network, configure as follows. My computer connect wireless to my router. My PS3, however, seems to be really slow when connecting wireless to the router and is at a proper speed when connected via ethernet. So, I have my PS3 connected to my computer with an ethernet cable. I put the wifi connection to be shared. Next, I set up my PS3 to connect to cable internet. Has gone through the steps and connected properly and at full speed too. However, there is a problem. My PC guard 'give up' connection to my router, while remaining connected to the PS3. I have to manually connect to my router again, regardless of the connection automatically option. Almost as if my PC is to use ethernet for internet access, (which he won't get that which is connected to the PS3) and so it loses the wifi connection. This abandonment happens around every 5 minutes or more.

  Is it possible to keep my PC connected to my wireless router and still be connected to my PS3 through ethernet to connect my PS3 using my PC?

  The problem seems to have 'fixed itself. I tried messing around with the connections that would not work even the bridge. Then I've switched back to ICS and did not have a disconnect since then.

  So the problem is now resolved, but don't know how?
  Whatever it is, I am very grateful for your help Manasa, it is well appreciated!

• LAN Internet - unable to connect to the Internet via a LAN cable

  Hello

  I have an ASUS F3S laptop series running on Vista.

  I went on vacation in early June this year and when

  I got home that I could not access my internet broadband via the bootable.

  I have an another old laptop which works fine using the local network.

  I use the ASUS at work and you can get the internet via wireless LAN.

  When I try to go online using the LAN laptop trying to access the internet

  using the mini port WWAN and not the LAN port.

  I have tried to replace the drivers and in desperation, have used the recovery

  drive to get Vista back to its original setting.

  I still do not have access via the LAN port.

  Any ideas?

  Sanquay

  You must re-create the network connection Wireless LAN (remove the current which is probably set to use the mini port WWAN and create a new one) and specify the LAN port during installation.  This should solve the problem. Check out the following articles for some detailes, suggestions, troubleshooting instructions and general information that may be useful.  Pay special attention to how to remove a wireless/network connection as it differs from a regular connection, and if not done correctly can continue to exist when you think he's gone (and the system it shows same gone but is not).

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not connect Equium M70 to the Internet via an Ethernet cable

  I have recently install wide telewest broadband via the installation disc. I used the provided ethernet cable. During installation, I received an error message stating that it could not connect due to various problems.
  After a long discussion with the customer service and try several solutions over the phone we wouldn't always get connection using the ethernet cable.
  Telewest has also provided a USB cable so I was told to remove the ethernet connection and plug in the USB. The connection has been made instantly.

  Has been informed by the technical support of Telewest, that I had a problem ethernet on the laptop. This could be correct, or maybe it was an ethernet cable from the spleen.
  Any suggestions? My laptop is only four months.

  Hello

  It is not easy to believe that the network adapter does not work on your laptop. What is the status of LAN in Device Manager? When the cable is connected is the assets of orange or green led or not? Try also to start ConfigFree tool. Under the physician connectivity tab, you can see their actual situation and if there is a problem of communication it will be shown here.

  If there is any attempt of trying to test it on another network (perhaps in your company).
  You can also contact your dealer and allow it to check the device. It can be done in the store and may not take a lot of time.

• K3 Note connection to the tv via a usb cable.

  My note lenovo k3 does not connect to my LG LED TV with a usb cable, I m trying so many times, but it always shows this usb device not connected.plz help me

  Note from the admin; phone added to the subject type

  K3 phone didn't come with the support of the mhl so I advise you to try to connect your phone to chrome cast device hope this helps.

• Satellite A100-784 - connect to the TV via a HDMI cable

  Hi friends,

  I have a Toshiba Satellite A100 - 784 PSAANE. Its a product abandoned now :-( I wonder if I can connect this laptop with the Sony Bravia LED TV via HDMI cable.
  I'm not able to find if the laptop is compatible for it.

  Please help me a way to find a solution to connect the led TV and how to do it? Please also help with the cables needed for the same thing.

  Sorry guys, I'm quite naïve HDMI company.

  Thanks for all the help,

  Kind regards
  Perkins

  Hey Buddy,

  What do not know exactly?

  The laptop has only VGA and S-Video output port but no HDMI port. So that you can t connect the laptop to the TV because you can t connect the HDMI cable to your computer.

  If your TV is VGA or S-video port, you can use this cable. After the connection to the TV, press the key combination FN + F5 to switch between monitors.

• Z580 help: connect to the TV via a HDMI cable

  I recently had my father the IdeaPad Z580. It is really eager to stream its videos and watch them on TV. I connected it today via a HDMI cable and got really excited when the screen was reproduced on the TV... but then, when I clicked on internet Explorer tile, I got the following error message:

  This application cannot open
  The screen resolution is too low for this application to run.
  Change your screen resolution

  Seems simple enough... but really did not have a clue what to do! Doesn't help that I'm a complete newbie to Windows 8!

  I'd be really grateful if someone here would be able to help / tell me what to do! ^^

  Thanks in advance!

  All of a sudden it works without enaything. In fact, I just do a windows 8.1 update.

• HP Envy m6-1350sf: laptop HP ceased to connect to a wi - fi connection, but it can still connect to the Internet through an Ethernet cable

  My HP Envy laptop does not connect to my home WiFi (Verizon FIOS modem). Some info:

  I had the PC for a few years and it is connected without a problem until a few days ago.

  If I plug an Ethernet cable into the PC, it connects to the Internet.

  All my other devices (computers, tablets, smart phones) to connect to my WiFi without problem.

  I got my PC in a place public wi - fi to see if she would connect. He did not.

  I have not upgraded the operating system to Windows 10.

  Suggestions?

  H @TomGinTX,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you can not connect wirelessly to your home network or a hot spot.  Very well, you can connect with an Ethernet cable.

  Here is a link to help you solve this problem.

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  Once you have completed the steps of troubleshooting if the problem persists, please test for hardware failure.  Under the component you have network.

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  To say thanks for the reply please click the thumb below.

  If this helped you solve the hard to please advise the posters by choosing the solution provided.

  Good luck!

• I have an Acer Travelmate 5620 running XP Pro with a Realtek Pcie GBE Family Controller. I connect to the web using an ethernet cable but should go to the network in the control panel and click Activate to connect. I want to be able to connect when I boot

  Internet connections

  Hello Daton,

  Thank you for your message.  Please ensure that the following setting is correct:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Select Device Manager.
  Double-click "network adapters."
  Less you should see your network adapters, double-click on each of them and ensure that they are ready to "Enable".
  Please let us know if this solves your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error: The period elapsed prior to obtaining a connection from the pool in the Windows XP computer.

  Original title: timeout expired.

  I get this question: timeout expired. The period elapsed prior to obtaining a connection from the pool. This can happen because all pooled connections were used and the maximum pool size has been reached.

  It's my code and the problem is maybe the part highlighted.
  Dr. MySqlDataReader = null;

  Try

  {

                  MySqlParameter [] param = New MySqlParameter [] {}

  New MySqlParameter("?_MaxTries",MaxTries)};

  Dr = MySqlHelper.ExecuteReader (ConnectionString, "call ssp_EscalationMails)
  ? _MaxTries) "(, param);"
  List emailList As new List();
  EMailInfo objEmailInfo;
  While (Dr. Read
  {
  objEmailInfo = new EMailInfo();
  objEmailInfo.ID is Dr.. GetInt64 ("EmailToFire_ID");
  objEmailInfo.To is Dr.. GetString ("To");
  objEmailInfo.From is Dr.. GetString ("From");
  objEmailInfo.Subject is Dr.. GetString ("Subject");
  objEmailInfo.Body is Dr.. GetString ("Body");
  objEmailInfo.CC is Dr.. GetString ("CC"); CC is null in DB
  objEmailInfo.Tries is Dr.. GetInt16 ("Tries");
  objEmailInfo.Sent = 0;
  emailList.Add (objEmailInfo);
  objEmailInfo = null;
  }
  SmtpClient smtpClient = new SmtpClient();
  smtpClient.Host = SmtpHost;
  foreach (objMail in emailList EMailInfo)
  {
  Try
  {
  MailMessage mailMessage = new MailMessage();
  mailMessage.To.Add (objMail.To);
  mailMessage.From = new MailAddress (objMail.From);
  mailMessage.Subject objMail.Subject =;
  mailMessage.Body objMail.Body =;
  mailMessage.IsBodyHtml = true;
  mailMessage.Priority = MailPriority.High;
  objMail.Tries += 1;
  smtpClient.Send (mailMessage);
  objMail.Sent = 1;
  mailMessage = null;
  }
  catch (System.Exception e)
  {
  string message = "shooting unique Email.
  + System.Environment.NewLine + e.get_Message () + ":" + Convert.ToString (e.InnerException) + System.Environment.NewLine + "EmailToFire_ID:"+ ".
  objMail.ID + System.Environment.NewLine +.
  "------------------------------------------------------------" +
  System.Environment.NewLine;
  Logger.LogMessage (message);
  }
  MySqlParameter [] uspparams = new MySqlParameter [] {}
  New MySqlParameter("?_EmailToFire_ID",objMail.ID),
  New MySqlParameter("?_Tries",objMail.Tries),
  New MySqlParameter("?_Sent",objMail.Sent)
  };
  MySqlHelper.ExecuteNonQuery (ConnectionString, "call usp_EscalationMails(?_EmailToFire_ID,)
  ? _Tries? _Sent) "(, uspparams);"
  }
  }
  catch (System.Exception e)
  {
  string message = "FireEmails()."
  + System.Environment.NewLine + e.get_Message () + ":" + Convert.ToString (e.InnerException) + System.Environment.NewLine + "-" +.
  System.Environment.NewLine;
  Logger.LogMessage (message);
  }
  Thank you very much

  Hi Swatikurra,

  The question you posted would be better suited in the MSDN forums. I would recommend posting your query in the MSDN forums:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle

  CARS: 2 nodes with Oracle single Client Access name (SCAN)

  OS: OEL 5.4 64-bit

  Version: 11.2.0.3

  When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).

  servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))

  serviceBD service

  SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;

  METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS

  ---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----

  serviceBD BASIC SELECT 180 NO LONG YES

  But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  Or

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  I have also observed the following (cluvfy).

  1 all LISTENER_SCAN running node 1

  2 there is no TCP connectivity

  3 the error message is obtained PRVF-5713

  [grid@rac1 ~] comp cluvfy $ scan - verbose

  Check scan

  Checking the single Client access name (SCAN)...

  ANALYZE the running node name?      ListenerName Port running?

  ----------------  ------------ ------------  ------------  ------------ ------------

  scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1

  Checking TCP connectivity to ANALYZE listeners...

  Node of ListenerName TCP connectivity?

  ------------ ------------------------  ------------------------

  RAC1 LISTENER_SCAN1 no

  RAC1 LISTENER_SCAN2 no

  RAC1 LISTENER_SCAN3 no

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  Check the resolution settings of name to 'scanvip.domain1.local '...

  SCAN the IP address status comment name

  ------------ ------------------------ ------------------------ ----------

  scanvip.Domain1.local 10.210.2.18 spent

  scanvip.Domain1.local 10.210.2.19 spent

  scanvip.Domain1.local 10.210.2.17 spent

  Verification of the installation program ANALYZES VIP and the listener has failed

  The analysis check failed on all specified nodes.

  Could someone help me please.

  The solution was to restart scan_listener.

  srvctl stop scan_listener

  srvctl start scan_listener

• I m error when i m to access the Manager version alb 3. "expired.the timeout period elapsed prior to obtaining a connection from the pool.this have bcz grouped all connection used and maximum pool size has been reached.

  Hi team,

  I m error when i m to access the Manager version alb 3. "expired.the timeout period elapsed prior to obtaining a connection from the pool.this have bcz grouped all connection used and maximum pool size has been reached.

  Please provide the solution.

  Concerning

  Ajay

  Discussion moved from the Knowledge Base of VMware Lab Manager

• OATS: Error Message 'Unable to get a connection from the browser' on the record

  Hello
  
  I am involved in the control of the operation for application Siebel 8.1, with the OATS 9.3 tool.
  
  Trying to save, an Error Message * "unable to get a connection from the browser. You want to continue to wait for the browser load? "* appears, even if InstallBrowserHelpers has been installed.
  I tried to uninstall the 'BrowserHelpers' and re - install but the question remains.
  
  your response on this will be appreciated.
  
  Thank you!

  Try to uninstall everything that touches on OATS to your PC then re - install. Uninstall steps are in this forum. You can search for it. Work around the error can take a long time.

  Concerning
  CP