Slow wireless connection of N on the S10-3 0647

Similar Questions

• Very slow wireless connection

  Hello

  I am owner of the Dell Studio 1555 and I Dell Wireless 1397 WLAN Mini Card on my Board. There is a problem when I am connected to my router and Internet runs very slowly. The signal strength is excellent, I use WPA2 encryption. There is no problem to connect to the network, I had just to configure the ipv4 as IP, the door parameters and so on because the automatic setting didn't work. So I run my firefox and google charges pretty okey but slow. It is then impossible to surf because the download speed is something like 1 kb/s. When I plug in the ethernet cable so it's all good. I tried reinstalling the drivers but nothing has changed. I use windows vista. I also tried connection in linux ubuntu system, but same problem occurs. My friend uses a wireless connection of the router same and everything is going well for him. How to speed up the connection?

  Best wishes

  Simon

  If you connect the laptop to the router (or the modem) with a cable? If it gives a high speed, you may need to change the channel is using your router. It's probably 11. Replace 1 or 5. Can significantly reduce the interference from other wireless devices connect speeds.

• [X 230] Extremely slow wireless connection

  Hi all

  I just received my brand new X 230. The problem is as indicated in the heading "wireless connection is extremely slow.

  I got my old SL300 of 4 years at the side of my X 230. When I test the speed to broadband, my SL300 yields 6 MB/sdownload and 1. 6 mb/s upload. However, my new gives a super speed reduced to 0.3 mb/s and 1.1 MB/s. So I think that my problem has nothing to do with my router.

  I've already put my setting of the adapter wireless for maximum performance (power options > change plan settings > change advanced power settings > wireless adapter settings > power save mode > maximum power output). But it does not solve the problem.

  Here's my X 230 Specifications:

  Intel Core processor i5 - 3210M (3 m Cache, up to 3.10 GHz)
  Operating system Windows 8 64
  Language English 64 Windows 8 operating system
  Type 12.5 "HD (1366 x 768) LED backlit display, ready for wide-band Mobile antenna 2 x 2
  Graphics system Intel HD Graphics from 4,000 to processor Intel Core i5 - 3210M
  Total memory 4 GB DDR3 - 1600 MHz (1 DIMM)
  Keyboard (backlit) US English keyboard
  UltrNav with fingerprint reader fingerprint reader
  720 p HD camera
  Disk drive hard HDD 320 GB, 7200 RPM
  Battery 6 cells ThinkPad X 44 +
  65W AC Adapter Power Cord - US (2 pins)
  Bluetooth Bluetooth 4.0 with antenna
  Integrated WiFi wireless LAN adapters Intel Centrino Wireless-N 2200 (2 x 2 BGN)
  Integrated Mobile Broadband broadband extensible Mobile

  Can someone please help me understand this problem?

  I can't really do anything with such a slow speed.

  Thank you very much in advance.

  I realize that it is not my laptop. It's my router actually.

  So if someone uses Cisco E1200, please update your firmware!

  (Ask the call center, that the steps are too complicated)

  I'm sorry if this thread is a boring.

• HP Officejet 6500 Wireless: Connecting older printer to the computer and the new router

  I've updated my router and got a new computer and cannot find a way to connect them to my old printer. I followed all the steps I learned other questions and instructions, but nothing helped.

  After having replaced the router reconnect the printer to the new wireless network?

  1. Press the Setup () button on the printer control panel.

• Satellite T110-121 - slow wireless connectivity

  Hi there, hope someone can help me.

  I just bought a Toshiba Satellite [T110-121 | http://uk.computers.toshiba-europe.com/innovation/product/Satellite-T110-121/1080681/toshibaShop/false/] laptop and it's absolutely great in every way, but it connects to my router wireless less than 512 Kbps.

  I have an another Toshiba laptop, I am about to sell ([U30013U | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&com.broadvis ion.session.new = Yes & PRODUCT_ID = 137279]) and the wireless speed is normally around 15mbps. All other laptops that were already connected to my wireless router are normally not less than 15mbps.

  The T110-121 is super fast when it is connected through ethernet, therefore, the problem lies only in the part things wireless.
  My router is a netgear dg834g, and I'm on DSL of the Virgin.

  The only major difference between my two laptops from Toshiba is the new are listed as being supported network: 802.11b/g/n connectivity and my oldest with the connection the faster is listed as: a/b/g. This would make much difference?

  I should also add that I removed all potentially problematic pre-installed software, such as Mcafee and I use Avast.

  Any help would be appreciated.

  Thank you.

  Hello

  There is a difference between simple standards of WLan 802.11 A, B, G or N.
  If your router supports 802.11 G or N then I would recommend choosing 802.11 N Router and the settings of the Wlan because the 802.11 standard card standard is the fastest and the most recent.

  Please check if the wireless network card is configured properly. You can do this in-Wlan card-> Advanced tab > Device Manager.
  You could improve also the unique parameters and performance of WLan.

  Last but not least, please check the Windows 7 power management because the WLan performance might be decreased in for safe battery power.

  An update of the WLan driver should be judged as well.
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• How to hide my wireless connection personal House of the user of the computer on the outside

  I see from time to time by my window a vehicle that is parked outside using their computer. Someone told me that they can connect to the internet using my wireless signal. How can I hide the outside user I have a wireless connection?

  Hello Maria,.

  There are a few things you can do to make sure that you are safe.

  #1. Make sure that your wireless modem is protected using a personal code to access WEP or WPA2. This is done by going to the configuration of your modem and the establishment under the wireless tab / link / article. Of the modem user manual must be able to guide them in this process.

  #2. The other way is to disable the broadcasting network option in the modem. The only problem with this option, it is only people who are currently using the network can get on again.

  I recommend establishing a password on your wireless network and in this way people can see your broadcast network, but they will not be able to get on it, unless they have the password.

  Hope this helps,

  JB

• EA3500 very slow wireless connection

  When I test my connection speed wireless with Linksys EA3500 get one only 5 Mbps download speed, if I connect my computer directly to the modem from my ISP I get a speed of 30Mpbs, someone has an idea why such a huge difference or have ideas I can speed thing on my wireless connection, no problem of co-location the wireless device which is 5 ft of the computer and only one switched printer connection Othere to my network wireless off?

  Maybe it is better because it can become very complicated when troubleshooting these issues

• Slow wireless connectivity with WRT54GS

  If I connect to the router with a LAN, I get ~ 63Mbps, but whenever I try to go wireless, the speed goes down between 12-15Mbps (at best). There is no update of the firmware for the router, and I am at a loss to the extent where how to get the best speed via a wireless connection. FYI, I have security WPA2 value, but I don't seem to lose a lot of speed (as appropriate) as a result of the security is enabled. I REALLY want to get the best speed via a wireless connection, but I am fairly new to try to figure out what kind of things networking, any help would be appreciated!

  The router is capable of speed of wireless connection reaching up to 54 Mbps. With today's ' Smart' technology, it would be a smart move, upgrade to a new router. Get a N router, if this isn't an AC, rather than keep the G one.

• wireless connection of losses on the reactivation of vista home Premium 64-bit

  My windows Vista Home Premium 64-Bit loss wireless connection on the awakening. I then have to make a stop down and re boot the lap top. Any suggestions/corrections?

  Hi Funnyman4u,

  Check to see if the problem exists in a clean boot state,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Wireless connection disappeared after pressing the button system Orange Cisco router WRT54G

  Trying to connect to a printer Dell wirless to the router and has failed, after many tests to get the computer to recognize the printer as a wireless device.  Recommended by Dell to refresh the router and I pressed the button in the above subject line.

  Now, none of my computers display the connection wireless as available. I have reset the time many cable modem and the router and him that restarted the computer and they still will not recognize the wireless connection.

  Also, I tried to use the default IP 192.168.1.1 to review my settings for the router (running a laptop directly via the cable modem), but the address keeps timing.

  What is someone out there knows what can happen to connect wireless to disappear?  Any help is greatly appreciated.  Don

  Your wireless network is gone because you press the WPS button on the front.  Never do this because you don't have the hardware to support it.  Change the SSID and password.

  Press and hold the reset on the back for 30 seconds and then release.  Wait 10 seconds and cycle power to the router.  To connect to a computer wired to the router at 192.168.1.1 only empty password, username "admin".   Now configure the router manually.

• No wireless connection after you restart the computer.

  Original title: wireless connection problems

  Hello my name is justin knox my girlfriends computer mobile computer ASUS laptop with windows 7 each time you turn off the laptop and turn it on my wireless connections are not available for me unless I have help it how can I get this laptop to connect instantly without troubleshooting it powers on every time?

  Hi Justin,

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you have any anti-virus program I suggest you disable and check if it helps.

  Note: Don't forget to activate once you have finished troubleshooting.

  You can also go through the steps and check out them.

  Method 1:

  Make sure that if the autoconfiguration WLAN service is set to automatic.

  1. click the Start button, type services.msc and press ENTER.
  2. scroll down to the autoconfiguration WLAN service, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  Method 2:

  
  

  1. open manage wireless networks by clicking the Start button, then Control Panel. In the search box, type Wireless and then click on manage wireless networks.
  2. click on add and then click on manually create a network profile.
  3. Enter the network information.
  4. If you want Windows to automatically connect when the network is in range, select the start this connection automatically check box.
  5 Select the connect even if the network is not broadcasting check box, click Next, and then click Close.

  For more information visit

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  You can also turn off UAC (User Account Control) and check if the problem persists. After return from the status, so that we can help you better.

  Note: Don't forget to activate the control once you are finished troubleshooting.

  Hope that information was useful and let us know if you need help in the future about Windows. We will be happy to help you.

• No wireless connection - can not operate the Satellite Pro M40

  Hi, first Post so hope I understand that I have Satellite Pro M40 A desktop connected to the router via Ethernet cable computer laptop used in another room with a Wi - Fi connection, I guess that means I had a wireless network? Re-installed Win XP and Service Pack 2 as I couldn't find Toshiba rescue disk now I have no sounhd or wireless on laptop something is obviously missing can not remember what I'm supposed to excuse the ignorance, but any help would be appreciated thank you I use the ethernet cable temporarily to access internet on Sat Pro thanks Derek

  Hello Derek

  If some components of hardware in Device Manager not preloaded properly visit the Toshiba download under http://eu.computers.toshiba-europe.com page > support & downloads.

  You will find all the necessary drivers (WLAN and his driver). When the wireless network adapter is correctly installed, you will be able to configure the WLAN connection.

• Wireless connection works only when the printer is turned off

  my desktop computer requires an adapter wireless for internet connection.  installation of this card was problematic and I discovered I mean it was because of my printer - a kodak esp 6150 desktop, which can work wireless.    I can only connect wirelessly when the printer is off on this computer.  However, two other laptops that do not need a separate wireless adapter are able to connect wireless when the printer is on.  any suggestions?   Thank you.

  Hi Moscotty,

  You can read the following article and check if it helps.

  Windows wireless and wired network connection problems

• WRT54GL: Fast cable internet connection; very slow wireless

  I have been chasing a problem for months and I am at the end of my mind.

  I started with a cable modem Motorola SB5101 and Buffalo bison wrt-hp-g54.  For years, we had a (intermittent) desperately slow wireless connectivity.  Recently I started to run through Speakeasy.NET speed tests to try to find a motive.

  Wire speed is consistently running 15-16 Mbit/s, compatible with the speed promised our cable package.

  Wireless speeds were a different matter.  From multiple computers, they would sometimes as soon as the wire speed; then all of a sudden (from all wireless computers) the speed would fall to 0.5 Mbit/s or less, then the speed measured on our single wired computer remained at 15 Mbps.

  Restart the router would mitigate the problem for a while, and then the wireless would fall up to 0.5 Mbps.

  Wire speed would remain stable at the nominal 15 Mbit/s.

  Well, looked like a bad router.  I replaced it with a WRT54GL hardware version 1.1.  I've updated the firmware to the last - v4.30.16.

  I selected a channel (2) wireless network what inSSIDer 3 watch is not used by any neighboring router (i.e., no interference).  I have that checked regularly and am sure that interference is not the problem.  The router is configured for the wireless G only; WPA - AES.

  The same problem occurs with the new Linksys router.

  In desperation I replaced the old modem SB5101 with a new SB6141 cable, not believing there could be everything possible that could help but, this what the devil - we will eliminate it as a factor as possible and go to DOCSIS 2.0 to DOCSIS 3.0.

  The problem persists.

  Thus, new router, cable modem brand new, constant wire-speed, without strong signals wireless, channel interference all around. but the problem persists. There has been no improvement on the old hardware I used.

  All computers, but a (XP Pro) is running Windows 7 Pro.

  The problem is not predictable, except that the speed degradation will happen sooner or later - and this is not progressive.  Suddenly, he fell like a stone and sticks to 0.4 to 0.5 Mbits/sec.  Reboot the router (usually) will fix it for a while, and sometimes it will clear up on its own, given enough time.

  I ran inSSIDer several times while this is happening, but he sees no other no signal on the channel I use--in fact, none on adjacent channels either.

  I checked from wireless to the router table and there is no other than our device, so it does not appear that the network has been hacked.

  Does anyone have an idea what might be going on or suggest an action plan?

  The only thing I can think is that there is something between the router and the computers wireless in the House which is eating up 95% of the bandwidth wireless - a sort of voting out of control.  But what?  I'm completely stuck.

  Follow-up.  I changed the channel 1 wireless; After doing some research I realized that sharing a channel (as long as your signal is at least 20 dB louder) causes fewer conflicts overlapping channels.  I have not changed anything else.  I'm tempted to allow the break-up of the frame but implementation of that seems to be somewhat specific to the supplier so I'll let it be.  In any event the wireless speed now as fast as the wire speed.

  The result is that since the re - install the Linksys firmware and do a hard reset that I saw not a single instance of the speed problem.  So I still don't know exactly what caused in the first place, but I'm glad that the problem has disappeared, so I'll just let things be.

  Thank you!

• 7520 HP loses the wireless connection. What can I do?

  I've seen lots of talk about HP products, loss of wireless connection.  I have the same problem with my 7520.  Initial Setup is perfect, but he began to lose the connection when it went into standby mode.  Someone at - it a solution?

  THERE IS A FAST SOLUTION!
  On April 18, 2014 (page 11 of this thread), I posted a quick solution. My HP7520 printer has worked on Netgear router WIFI 7550 flawless since then. I suggest you read this post.
  From long experience with HP, I found they have great hardware, but their software has always been dismal. The ultimate "fix" would be for HP address their failure of a software that allows to my difficulty in working.
  A single "tweak" in the router security settings wifi will do. The rest of settings changes other people have suggested are short lived (about an hour in most cases), while they don't be reconnected unless they restart everything. It makes sense because of what is happening.
  The single "twist" parameter should logically point HP programmers to where in the firmware, there is the problem. They listen to? And, really, it doesn't matter on all other settings printer and router. All mine are back to the default settings and it all still works very well.
  Go to a BBQ and stop wasting your time on this issue.
  Ken