Wireless disconnects randomly on my laptop.

Similar Questions

• Wireless network problem: disconnects randomly anywhere between 1 and 4 hours.

  I have a wireless network problem, it disconnects randomly anywhere between 1 h and 4 h. The network consists of a Samsung 4 G hotspot and a Linksys AE1000. The signal strength is excellent, the AE1000 is 1 ft of the computer and 1 ft of the HotSpot.  The computer is a Dell Dimension 2400. Any ideas?

  Hi Jack,

  Problem solved.  I did 2 assumptions about the original problem.  I assumed that the 2 Tech that I spoke made the hurt their product. Battery saver has been activated on the hotspot.

  Thanks again

  Greg

• Every night between 19:00 and 22:00 our browser laptops wireless disconnects.

  Every night between 19:00 and 22:00 our browser laptops wireless disconnects. There are 2 to 4 other connections, showing other places in the region. Could it be the problem?

  Hello

  (1) did you make any changes before the show?
  (2) you receive an error message/code?

  Method 1: Try to disable all security temporarily software and check the status of the issue.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  Method 2: Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  I hope this helps.

• Laptop disconnects randomly wifi, Windows 8 problem?

  Whenever I use my cell phone it disconnects randomly my wifi, it happened to someone else?

  Whenever I use my cell phone it disconnects randomly my wifi, it happened to someone else?

  Hello

  Check the following settings.

  1. press the Windows key + X to display the system menu, and then click Control Panel.

  2 open the Device Manager and expand network adapters.

  3. right click the installed card and select Properties.

  4. click on the power management tab.

  5. If there is a check mark in the allow the computer to turn off this device to save power, the option to Remove the check mark, and click OK.

  The results of the tests.

  Tell us what you find.

  Concerning

• NETWORK DISCONNECTS RANDOMLY, I READ EVERYTHING HERE AND NOTHING WORKS, PLEASE HELP ME! :(

  Lenovo G510
  Intel core i5 - 4210M
  Windows 7 ultimate
  Broadcom 802.11n network adapter

  For almost a month I had problems with my laptop because it disconnects randomly the system for some reason, I can't identify.
  It can operate correctly for one hour, then disconnects the wireless network card. Every now and then, or every 10 minutes, depends on the day I guess.
  I had a lot of reading the forums on this topic and found nothing to work up to now
  That's what I tried:
  -everything is on maximum performance
  decliques-i 'allow the computer to turn off this device to save power ".
  -disabled some 'ip helper' in services
  -check all that relates to the router (change channels, interference with other routers or wifi), the hardware part SEEMS very well (the laptop is fairly new, it's like a year and never had any problems with it)
  -verification of updates of drivers, it says I have the latest version
  -fully scanned the laptop for viruses and none has been detected
  n ' install any programs lately that could cause this
  -network, signall is excellent

  And still nothing worked. NOTHING. I'm really desperate now. The only thing that makes the network working again almost instantly (like5-10 sec then that if I let him restart itself it takes 2 minutes for even 30-40 minutes), turn and turn again on the wireless network card (I have it by pressing the airplane mode)
  If no help pleaseeee? I noticed that it happens to many other users also.

  If the steps we have provided above has not resolved the problem with intermittent wireless connectivity, then what Canadian technology said, it is likely that the problem lies in the material.

  Intermittent wireless connectivity are often caused by loose or defective air intakes to the wireless card, or a faulty card as well. This is the reason why Canadian Tech informed on the use of an external USB wireless device.

  Another option is to contact the manufacturer of your device, which is Lenovo, for repair options based on security they provide. You can contact them via this link.

• Mouse Bluetooth disconnects randomly the macbook pro

  So, I have a logitech bluetooth mouse (M535) and sometimes it disconnect random for my mac and then reconnect a few moments later... Is there a reason that this is happening, or is it possible to fix it?

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  Problems of Bluetooth wireless

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• Y500 Wireless disconnection

  My wireless disconnects always randomly a few times every day. Before I had to resolve to fix wireless adapter when I had this problem. Then, I tried a few fixes in other threads with the similar topic. It always disconnects randomly, but I don't have to fix it, simply manually connect to wifi. No other devices connected to my network have this problem.

  Try this:

  1. disable bluetooth (you can play and activate this later, after problems and achieve a stable wifi connection problem)

  2. start the bios and disable secure boot (reactivate this once your problem solved)

  3. start in safe mode

  4. go in Control Panel/Device Manager and look for the wifi card. It should be in the network card.

  5. uninstall the driver. When presented with the case of the delete option to delete permanently. Click OK.

  6 reboot the device.

  7. Windows will install its own driver wifi with the default settings. Do not change the settings.

  8. connect to the internet. Enter the ssid and passhrase to establish the connection.

  Check if you have a stable connection. If so, remember to re-enable secure boot.

• Internet disconnects randomly

  OK to give a little history, I've been playing around with the system setting I wasn't suppost to (mac address settings) and my problem started shortly after I did. any ideas? It will connect for a good hour, auto disconnect reconnect and has no internet access to about 15 minutes then has access to the internet

  Hi taylor1210,

  Welcome to the Microsoft community. According to the description of the problem your connection Internet disconnects randomly. Provide the following information:

  ·         You get the error message?

  ·         You use a third-party security software?

  I'll help you with this problem. I suggest you follow these methods.

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  I suggest you to reset the TCP\IP stack and see that if this is useful, the following steps will help you reset the TCP\IP stack.
  1. to open a command prompt, click Start , and then click run. Copy and paste (or type) that follows the command in the Open box, and then press ENTER:
  cmd
  2. at the command prompt, copy and paste (or type) the following command and then press ENTER:
  netsh int ip reset c:\resetlog.txt
  Note If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt
  3. restart the computer.

  See also:

  Why can't I connect to the Internet?

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• External drive USB disconnects randomly

  Hello

  I use a Mac mini as a server and include two OWC MiniStacks in annex. The Ministacks are connected via USB3 and underneath the Mac mini. The Ministack in the Middle started disconnecting randomly and I have to turn off and on to get it connected.

  The Mac mini is always on and I use the disks USB as server provided the network disks.

  I have Seagate Enterprise drives in the world.

  I get the following output in the Console:

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - reset BOT finished with kIOReturnTimeout.

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - will be reset to zero.

  22/08/16 19:08:20, 000 core [0] 1533181.822274 PRT7@14700000: AppleUSB30XHCIPort::resetAndCreateDevice: could not create the device after tests (1), disabling port

  22/08/16 19:08:21, 000 core [0] USB device 1E91B0B114700000 - fConsecutiveResetCount = 1.

  22/08/16 19:08:21, 000 core [0] disk3s2: device / channel is not attached.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] hfs: disassemble initiated on SERVER 2 DATA on the device disk3s2

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: do_jnl_io: strategy err 0 x 6

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: write_journal_header: error writing to the journal header!

  22/08/16 19:08:22, recorder disc 775 fseventsd [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:22, 776 disc fseventsd recorder [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:23, 085 deleted [695] normalizeUserMountpoint:791 volRoot failed for SERVER/Volumes of DATA 2

  22/08/16 19:08:23, 085 deleted [695] _validateVolume:813 unable to normalize the volume: ' / SERVER/Volumes of DATA 2 ", flight: (null)

  22/08/16 19:08:26, certadmin 148 [97828] connected to the notification Service

  What is going on?

  HARD drive fault?

  Not pregnant?

  Damn Mac mini?

  I thank very you much in advance!

  He could be sleeping?

  Could it be overheating?

  Have you tried swapping the cables yet?

• I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  Try this below and see if it help you.

  http://support.Microsoft.com/kb/871122

• Program to disconnect randomly with SonicWall

  Hello

  We have a chat program called HUD that belongs to our Trixbox phone server. After the passage of a Zywall Firewall in 215 SonicWall, the program disconnects randomly every 30 seconds to 2 minutes at different intervals for all users. This affects users within our network, but not outside.

  The program uses a TCP port that is transmitted WAN > LAN pointing to the server.

  We also tried adding QOS to the firewall rule for nothing doesn't. We have also tried to add a LAN > WAN, all in all, with QOS and that did not help.

  If we move to our old router, everything is fine.

  Any ideas what could cause this?

  Hello

  In fact, we have fixed it. We simply removed and read via the Server Assistant and he began to work for some reason any.

  Thank you
  Ben

• The mouse continues to disconnect randomly

  span / / p
  With the help of OS Vist, my husbands mouse continues to disconnect randomly.  He has reinstalled the drivers, did the computer repair.  He changed the mouse to a new with the same result.  It has also changed the cables autour and she always does on other ports.  It seems to be a problem with OS rather than material.

  Problem solved (for me). Resolution-Wrecked TWO mice! Bought again the machine and we like that. I will never use two mouse at the new!

  Question answer.
  Operating system: Win7. (Even if the previous user, the question was under Vista).
  Question started: yesterday. 23 / Feb / 2010.

  Hello, my name is Royce, I have a problem with my mouse on Windows 7.

  Question: The mouse turns off randomly, I hear the device disconnect sound, then the sound of connection device. It disconnects all all three to six seconds, and the mouse power light turns off during this disconnect. I suspect my internal USB Hub is powered off, but do not.

  Cause: I had two mouse plugged in at the same time, so a friend can have control of the screen with me. In a few minutes, this problem started.

  Tried to fix it: I uninstalled the mouse driver, tried different ports, updated windows, different mice, taken the battery out of the motherboard, reset the bios and even entered in DeviceManager and ensured that all usb hubs do NOT go to power saving mode. I don't know what else to try, but then again I'm not all that known with Win7.

  When you first start my PC, the mouse will be OK for about 20 seconds, then the problem is getting worse and worse. If I don't move my mouse, I don't hear the disconnect sound, but it is perhaps more than that.

  When the mouse goes off, I think I can use my keyboard. The CapsLock light is wrong, so I suspect that the keyboard does not meet this problem. Oh, and all of my devices are USB2, so it's all modern. My PC is new, built the House. It's a machine fast quad core with a lot of power to the usb2.

  Help, please!
  Royce Barber

• When I disconnect the monitor Samsung, laptop monitor loses the office.

  I use a laptop Toshiba Satellite L645-S4102.  I have been using an external Samsung monitor for a while.  I need to use the laptop for a presentation only.

  I can change to the screen of the laptop or use the Samsung monitor and the laptop monitor as long as my computer is connected to the Samsung monitor.

  But, when I disconnect the monitor Samsung, laptop monitor loses the shortcuts on the desktop and the taskbar and shows only the background.  I tried to restart the computer, but the same thing happens.  As soon as I reconnect the Samsung screen, everything happens very well again.  Ideas please.

  Start with the extra monitor connected and used.  Then go to your desktop and follow the instructions below:

  1. Click background, choose the resolution of the screen.
  2. In the graph at the top, click on your laptop screen (if you don't know who is who, click "Identify" and click the monitor displays on the screen of the laptop).
  3. Check the box "use as primary monitor" and then apply the change.

  The bar of tasks and other items still show on the main monitor, so this will ensure that your laptop screen is considered to be the main.

  If necessary (unlikely but it could happen), repeat these 3 steps again when the additional monitor is disconnected.

• Wireless disconnects if unity CQ61 left idle for more than 5 minutes

  Hi, I have a HP Presario CQ61 laptop with an Atheros AR9285 wireless adapter. When the laptop is more like 5 minutes of inactivity, wireless adapter loses the connection to the wireless router. Then I have to reconnect to what can take a long time to do - it's faster restart the laptop.  Changed no settings. Any suggestions?

  At a prompt, in the box start the search, or in the run box, type the following command:

  MMC devmgmt.msc

  Go to network and expand it.
  Select the Atheros AR9285 wireless network adapter.
  Right-click and select Properties.
  Go to the power management tab.
  Uncheck both check box.
  Click OK, and click OK.

  This should solve the problem.

• I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

  I would like to change my subscription to a new laptop computer. Can I just disconnect on the old laptop and upload the new or should I uninstall on the old?   I also installed on my desktop that will not change. Thank you!

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0