HP 7510 AIO printer won't connect - Wired workstation, printer wireless

Similar Questions

• HP AIO printer 7510 - printer icon no choice of level or scanning of ink

  I have a HP 7510 AIO Printer.  I had to reinstall my drive.  Now priunter icon does not give me the options for scanning or the ink level control.  How can I get that back?

  Hello

  How you don't have reinstall it? Please download the following file and install on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL39677/MP-108855-3/PS7510_1315.exe

  HP Photosmart 7510 is a good printer. All my tests.

  Kind regards.

• Connect wired PC to printer on wireless LAN

  I would like to connect my PC running Windows XP on my Pixma MX452 printer through my local network. The PC is connected via a wired connection to the same router to which the MX452 is connected wireless. Both connections are fine. I can print wireless from other devices on the wireless network. I can also connect to the Configuration application to the network printer to the PC through a web browser by entering the IP address of the printer, but I can't find it in the process of "Add a printer" Windows XP. Is it still possible?

  Hi CanonUser1971,

  You can install the drivers for the printer from the Web of Canon USA site on your Windows XP computer to connect your PIXMA MX452.  When you install the drivers, make sure that any antivirus firewall software that is on your computer is temporarily disabled, because these programs can sometimes block the printer detected on the network. Once the printer is detected successfully, the software protection can be reactivated.

  Please click here to access the drivers and software page for the PIXMA MX452. Once the initial download to your model page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, click the red arrow next to the "RECOMMENDED DOWNLOADS" section and click on the MINI MASTER CONFIGURATION file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once you have downloaded the Mini Master configuration file, double-click the file and follow the prompts to install the printer on your computer.

  I hope this helps!

  It has not responded to your question or problem? Please call or write us using one of the methods on the page contact us for further assistance.

• PC won't connect wireless but with a wireless printing?

  I have windows XP and my PC won't connect wireless, but I can print wirelessly from the PC. This has happened once before, but Microsoft is not going to help me this time.

  Hello

  Please follow the steps in the link

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Dell Photo AIO Printer 962 does not. Follow the instructions in the configuration utility.

  Driver is there but does not connect. I can print alignment but not test. I tried all the suggestions, I found, but still won't work; even uninstalled and reinstalled with the CD. Follow the instructions in the configuration utility. I saw other people with the same problem. can't the difficulty of mine. It also tells the boot trying to remove the abnormal length. Xc0000005 code exception)

  Hi Ohdiane1057,

  Note: a patch is released for Dell AIO Printer 962 Photo, I suggest visit this community link provided below and try to install the patch and see if the problem is resolved.

  http://en.community.Dell.com/support-forums/peripherals/f/3528/t/19046379.aspx

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Printer configured for wired computers and wireless

  Hello! Hope you can help me. We have a Photosmart C7280 printer all in one, which is currently connected wireless to a Cisco DCP3825 router that supports the wired computers and wireless. We have many laptops, wireless connection to the router, and anyone can print. I want to add in my HP desktop computer, which is not wireless. I plugged into the router via a cable and loaded the software of the printer, but the installation wizard could not find the printer to complete the entire upward. I unloaded all printer software until I tried it. In addition, I didn't know if I should choose a configuration of wired network or a wireless network configuration, so I tried both and neither one worked. I tried to look in the manual, but it was not useful. What is the best way to configure my network home, so we can print everything? Thanks in advance!

  Your router will not worry how the devices are connected.  Download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.  When it installs it will see your printer on the network and install the appropriate software.

• HP Envy printer 4500: poor/no wifi connection - I can't print wireless

  Hello

  I recently moved into the new home of the University, and the wifi reception is very low.

  When I go to "Wireless Details" on my printer, it said no "detected" - I assume that given the weak wifi signal in my room, my printer just will not come back on any signal and so I won't be able to print wireless? If this is the case, is there not an option for me to print using a cable any?

  However, when I go to "Wireless Setup Wizard", the my wifi SSD hard drive is launched as an option/is detected, but when I click on it to try to connect, it says ' unable to connect to the network. The type of authentication or encryption is not supported "."

  I just want to be able to set up my wireless printing. If no reception is the issue, then how can I go about printing without having to use wifi?

  Your school uses authentication Enterprise that do not support home printers. Yes, you can use a printer USB cable and connect to your computer very well. Like this one:

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_4?s=PC&ie=UTF8&QID=1452379282&SR=1-4&keywords=printer+USB+cable

• Need help Kodak 5500 AiO printer over the network.

  I have a kodak 5500 AiO printer. I have vista on all my computers (1 bureau and 3 laptops). I downloaded the sp2 for vista on all computers, after I downloaded sp2 desktop mouse and keyboard froze, I had to uninstall sp2 to make it work. Now the printer on my home network to print or not be discovered by my laptop. I can see the printer on the network to my laptop but I can't connect to it. The printer is on the desktop via a usb cable. I deleted the printer drivers and reinstalled and downloaded the software and drivers for the latest printer.  I need help.

  Thank you

  Phil

  original title: using network printer

  Everyone,

  That's what I had to do to get my printer working once Vista it has messed up. You do the first two steps on the computer to which the printer is connected. The last step that you do for your laptop or you want to connect the printer to the main computer. I hope this helps.

  Hey all,.

  We had this same problem...

  We had to follow the procedure proposed by Drompa...

  > 1) share permissions
  >> 1. In explorer, select C:\windows\system32\spool\PRINTERS
  >> 2. Make a right click, properties
  >> 3. Tab sharing
  >> 4. Advanced sharing
  >> 5. Check "share this folder".
  >> 6. Permissions
  >> 7. Grant everyone full control
  >>
  (> NTFS permissions 2)
  >> 1. In explorer, select C:\windows\system32\spool\printers
  >> 2. Make a right click, properties
  >> 3. Security tab
  >> 4. Edit
  >> 5. Add
  >> 6. Advanced
  >> 7. Find now
  >> 8. Select 'NETWORK '.
  >> 9. Ok
  > 10. Total control of the NETWORK grant

  AND THEN we had to install local printers, using the port trick...

  1. go to 'printers '.
  2. click on "add a printer".
  3 Add a local printer.
  4. "create a new Port.
  5. use the "Local Port" option
  6. on "Enter a Port name" enter: "\\Computername\Printername".

  And if all goes well should do!

  Good luck!

  Credit to Drompa and otherdreams to help out me.

  Phil

• I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

  original title: devmgmt msc

  I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

  Hello

  I suggest you to see link below and check if it helps.

  http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

  I suggest also you see the steps from the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• HP Deskjet F4440: Turn wired printer wireless printer

  I see a lot of info on the web lately on turning wired printers and more wireless. Just for fun, I tried my F4440. It didn't work, it was not considered when searched under "Add new printer" in "devices and printers". My question is, can a F4440 be transformed into a printer wireless to connect it via USB to a wireless router?

  Hi @nascarjunky,

  But connect a USB cable from the printer to the router is not supported, it might work. You however will not be able to analyze this way. If you are interested in a wireless printer, you can consider calling our technical support, because they may be able to offer a discount on a newer model. Most of the more recent, if not all, models have the ability to print from mobile devices too. May be worth investigating.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

• Photosmart HP 7510: HP Photosmart 7510 stopped printing

  Hi all

  I bought my HP Photosmart 7510 in 2012 and, until recently, never had a problem with it.  I have a wireless connection.  My Photosmart HP 7510 stopped printing.  I checked with HP print and Scan doctor and followed the steps to determine the problem.   Check for levels of printing came out showing the colors of ink for all but the black cartridge.  I installed a new cartridge.    A new impression level check again showed no black ink level.   I followed the instructions for the cleaning of the printheads and waited as instructed.    I wnet to my printer a few days later and was able to print a few pages perfectly.  But after that, the problem started again.  Now, when I print a test page, I got only one or two colors showing but never in black ink.

  I not made any changes to my system, and there is no driver updaates.   I wait with my OS to Windows 10 udate but haven't yet.

  You can provide any assistance will be greatly appreciated.

  Thank you!

  Norfolkgirl723

  Hi norfolkgirl723,

  Welcome to the HP support forum.

  I understand that you use a HP Photosmart 7510 e-all-in-one printer with a Windows 7 and you had a black ink not printing not question you thought went away, but now it's happening again. I would like to help with that.

  If you do the function of cleaning head with the printer and printing that has no black on it, there is probably a problem with the cartridge or maybe the printhead itself. Here is a document of support for help with this question - color or black ink not print.

  Please let me know if that solves the problem, or if you need assistance.

• cannot print wireless to wireless using a but access point wired printing (pc) wireless technology is very well

  I have a HP OfficeJet 8600plus N911a CM749A # product who has problems in this impossible to print wireless to wireless using an access point but Wired print (pc) wireless technology is fine. We have 4 pcs in a network cable that work very well try to print to the printer which is connected wireless. They installed the software and discovered the printer very well. When you try to install the printer on a Win8 Tablet and a laptop Win7 that neither would discover the printer, so I have two devices connected by ethernet cable and ran the facilities in the same way as the PC and installed everything and worked fine. But, after I disconnected the wire and reconnected or the other device wireless again (they go OK so I know that they get an address) when I go to print to the 8600 it says there is no communication to the printer. BTW, I can install (and installed) other (cable) HP printers on the network as the computer laptop and Tablet AUTODECOUVERTS and print... Yes, ideas on why it loses its Wireless communication to the wireless printer. He turns a few odd Protocol or discovered that did not pass on a wireless system?

  Thank you for answering my question and I wanted to know was the brand of the router.  I suggest making sure the router firmware is up to date as well.

  Here is a link to a post I did on the various ports used by HP printers for reference.

  -Incoming and outgoing Ports-

  So all your work computers don't encounter this issue?  Once again, while in the router, verify that wireless isolation is not activated.  A question also, I do not see has anti-anti-virus/firewall you had on your main computer that you are using?  Maybe it's not the cause, but that depends on the software, too.

  -Security and Firewall.

  You have all the exclamation points in your device manager?

  Let me know what is happening when you try another access point.

• Unable to connect laptop to a wireless printer

  Hello:

  We have a laptop HP with Windows 7 Home Premium 64-bit.

  and a HP all-in-One Photosmart Premium C309g printer/copier/scanner.

  It was all together upwards and work wireless very well for a few years.

  Our wireless router went wrong.

  We replaced our DSL modem and the wrong Linksys router with a modem router Netgear.

  We have established between the bridge and the laptop's wireless connectivity.

  We are unable to establish connectivity between the laptop and the printer wireless.

  Printing works fine via a wired connection.

  Is this connectivity issue... cannot connect wireless...

  a network configuration problem & sharing Windows... or... is there something that needs to be

  configured in the gateway provided by AT & T?

  Thank you

  DaleB

  So, you configure your laptop to recognize the bridge and he knows the SSID and password, but you have set up your printer for the same SSID and password? Until you do, it will NEVER work wireless...

  You will need the manual of the printer as it must be installed at the end of the printer...

  http://h10032.www1.HP.com/CTG/manual/c01856402.PDF

• Dell Photo 964 for W7 x 64 AIO printer driver

  Hello

  I am looking for a printer driver to use my printer Dell AIO 964 Photo under Windows7 ultimate x 64.

  Thank you very much in advance for your help.

  koalablue95

  PudgyOne,

  as already reported:

  I'm still looking for a working driver sound for my Dell AIO Photo 964 USB cable connected to a laptop of Lenovo T61 with:

  OS name Microsoft Windows 7 Ultimate (multilingual; language: English, United States)

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer OS Microsoft Corporation (real & registered)

  The LENOVO system manufacturer

  System model 6460A 44

  System Type x 64-based PC

  Processor Intel (r) Core (TM) 2 Duo processor T7500 2.20 GHz, 2201 Mhz, 2 Lossnay, 2 logical processors

  Originally, the laptop came with an OS 32-bit of Windows Vista under which the Dell AIO 964 Photo worked without any problems and I could use all it's features.

  After the update to W7 x 64 in 04/2012, all my devices and other drivers are working well except the Dell AIO 964 with compatible software Photo missing driver!

  Strictly following your recommendations of procedure installation to date, always the driver installation fails with:

  -"Device driver software was not properly installed" or with

  -' Dell Photo AIO Printer 964: ready to use '; and "964:No found Dell Photo AIO printer driver.

  I use the Windows Firewall and AVG2012.

  Driver installation failures also occur, when I turn off:

  n ' matter what internet connection

  -temporarily the firewall and/or

  -temporarily anti anti-virus AVG2012

  which means that the firewall protection software and the virus should have no impact on an installation driver successful or?

  I hope that these details could give you an "idea" for a procedure of working solution.

  Please let me a comment on this topic:

  "In the meantime, I must admit that I am a bit disappointed by the structure of DELL support"

  I'm looking forward to your reply.

  Kind regards

  koalablue95

• Dell AIO Printer 962 Photo and Windows 7 32 bit

  OK, so I thought naively: "you had Windows XPII SP III for several years.  Time to update. "I bought a program of 32-bit Windows 7 for my old Dell Dimension E520.   Thank God I have the Windows 7 Upgrade Advisor printed report that told me what to expect with a certain number of programs, including Dell AIO Printer 962 Photo, Jasc Paint Shop Photo Album, WordPerfect12 and a few others wouldn't work, or have problems with Windows 7.    First of all the Dell AIO Printer 962 Photo.  Despite the fact I've updated drivers, and the small list of control on the screen tells me it is read to use, I get a message saying something like "your computer is unable to communicate with your printer.  He then advises me to unplug/re-plug the USB power cord cord, restart the computer, etc..  I did all that, nothing.  Second, the software I bought Corel, WordPerfectX6.  The thing installs OK.  Then I try to run it and I get a message stating: "WordPerfectX6 has stopped working" No. S_t!  I tried to uninstall and reinstall and nothing.  I had a call to the toll-free line 1-taking in charge, but I swear to you that I am about to return the thing and just do with NotePad.  What is essential now is Dell
  Photo AIO Printer 962.  Someone at - he had THIS problem and found a solution?  I mention the other problem where the two events are related.   And since I use Windows7/32-bit, a Microsoft Product, I take a shot that maybe someone can have a cure!   Thanks in advance for any advice. Series-poet: (o)
  

  Dell, web site, there is no driver Windows 7 not listed for your printer on the printer control, so everything you download may not work. The thing nearest Dell listed are Vista drivers, you can try the 32 bit version.

  Cut first download auto driver from windows update.

  Start right click System computer/properties/Advanced/settings/device installation settings/tick won't let me choose and never install win update and save the changes then install driver.