WLL Logitech F540 wireless headset runs on windows xp and windows 7?

Similar Questions

• Logitech clearchat wireless headset drivers won't install correctly? They are microsoft drivers

  Hey guys:

  My dear helmet is just a weight of paper at this time because the driver files refuse to install properly on my laptop Dell, vista, the system, I tried connected to my office of wives and they work fine, it's just my laptop which does not recognize the driver file?

  Unknown manufacturer... error in the file?

  Now my logitech wireless mouse is not working either?

  Wondering if you guys may be able to help the helmet probs?

  Brad

  You can get in trouble with your device drivers - especially if you use Microsoft drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you need for the wireless mouse and the chearchat wireles headphones) and all the others you have time to do - they can help way beyond simply solve this problem, make the computer dealer or the manufacturer of the device (NOT of Microsoft Updates or Microsoft).  Make sure you get the right drivers for your device and corresponding to your version of Vista - there may be several options and it's probably only one is good.  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.  If not post back with the results of what you have tried and it failed and the error messages that occurred (the EXACT text) and see if we can come up with a few other options to try.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Logitech Wireless Headset H800 does not

  Original title: Logitech Wireless Headset H800

  I have all the signals on the helmet (light Amber to connect to the computer and the green light for light), but not yet by train

  all the sounds. I have configured and says working properly. When I do a search in the computer (Windows 7) is not displayed. In the playback area

  It shows Logitech wireless by default. Have you tried another USB port, stll same problem

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  You can follow these steps and check if it works:

  a. click Start and select Control Panel-> his-> in the tab 'read' select 'Properties' for your device. (helmet)

  b. then you will be on a tab "properties of speaker.  Select 'levels this option will allow you to change the balance.

  You can also see the following articles for more information:

  Adjust the sound level on your computer

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

   

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Bluedio wireless wireless headset does not

  Bluedio headphone wireless not working is not wireless. I hate the son as being disabled, I have seem inclined to get al tangled son. CABLE

  I have followed all the steps, install the driver, pair it with laptop, headphones to the computer using the port on the laptop.

  So more how do I do?

  Hello

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your laptop?
  2. What is the model number of Bluedio wireless headset?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to wireless headset problem. I will definitely help you.

  This problem may occur because of corrupted device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  http://aka.Ms/diag_device

  If this does not help, use method 2.

  Method 2:
  Use the steps described in this article and check the issue.
  Reference:
  Bluetooth devices do not work correctly on a computer that is running Windows 7
  https://support.Microsoft.com/en-us/KB/980396

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• PDP Afterglow Wireless headset, disconnect

  Hi, my problem is that my USB transmitter disconnects from my computer when I turn on the headset and it connects to the transmitter. While the headset is off in my sound devices it shows a headphone Afterglow is connected and when I turn on the actual headset, she vanishes. I tried to uninstall and install the drivers and using 4 different USB ports and 3 different USB 3.0 ports, but in vain. The head is set well for my Ps3 and Xbox 360. If I connect it manually using the plug to headphones, I can get the sound to play, but that defeats the purpose of having a wireless headset, also doing it this way only allows me to use the microphone. Any help would be appreciated as I tried for weeks so he could work.

  Hello Brandon,.

  Thanks for posting your query in Microsoft Community.

  1. You did changes to the computer before the show?
  2. The problem is specific to a wireless earpiece? Have you tried to plug any other
     wireless device?
  3. What exactly are you to pass, when you say "my USB transmitter disconnects.
     my computer when I turn on the headset and it connects to the
     Transmitter?

  I suggest you run this Microsoft fixit and verify.

  Reference:
  Hardware devices do not work or are not detected in
  Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  What should I do if my headset is not paired his device?
  http://support.PDP.com/ICS/support/default.asp?deptID=5553

   

  If you still have questions, contact support for PDP Afterglow

   

  Contact us

  http://support.PDP.com/ICS/support/default.asp?deptID=5553&redirect=true
  Please return with the required information so that we can help you further.
   

• Mixer volume + USB wireless headset Bug

  It's my first post

  My name is Chris and my computer (Asus U56E-BAL7) had problems with Windows 7 64 bit operating system. When I click on my Volume Mixer and click to change my volume, it does not. When this happens, Skype also seems to have its own problems. These questions are calling others, send messages to others, receive calls and end a call. Nothing to really respond correctly when this problem occurs. Usually, it happens at startup and varies on and outside. Sometimes it stays on, and then sometimes it remains off. I have the "Logitech G930 Wireless Gaming Headset USB" and it disconnects and reconnects a lot. There seems to be problems I see. I tried Malwarebytes, Microsoft Security Essentials. Security Essentials did not detect anything else that Malwarebytes seems to see virus which I deleted but it has not yet decided anything. I use Bandicam which screen save my computer. Can I record a video and post here (I hope) to show you what is happening. I didn't seem to have any problems until ' on last week. It upsets me like that, I expect a computer that works properly, but it doesn't. I checked several other forums, and yet none of them have information that improved / did not improve anything. It is either on my computer to the geek squad for them give remedy when that costs money vs ask first community of Microsoft for help. I hope that there is a difficulty behind it all.
  -Chris
  UPDATE: today I realized that it was my headset (Logitech G930 Wireless Gaming Headset). But my main question, now, is why my headphones is messed up? What drivers? The USB key? Just a question because this helmet was perfectly fine until the Volume mixer started crashing.

  Make sure that the sound is not muted. To check the sound settings, double-click the speaker icon on the right side of the taskbar or go to the "Start" menu, then select 'Control Panel' followed by 'Solve system sounds' to open the volume mixer. If there is a button with a red circle that has a slash through it, the system is muted. Click on the button to make a red circle with the slash disappears and re - turn on the sound.

  Check the volume level in the volume mixer window. It is possible that the sound works but the volume is too low so that you hear it. Increase the sound by clicking the marker on the vertical scroll bar and move it to the top.

  Sponsored links

  • Start download

    Convert videos for free download here!

  www.Donwload.pconverter.com

  • 3

  Know if the sound card is properly installed on the system. Click on the "Start menu", open the "Control Panel", select "Hardware and Sound", then "Device Manager." The sound card must appear in the list of devices. If it is not the case, it is not installed correctly and must be reinstalled according to the instructions provided with your card.

• Wireless headset won't connect

  I am using the logitech wireless headset H800 with my hp laptop Pavilion g4

  My product number: serial number of LW338UA #ABA: [redacted]

  I have connected the logitech receiver to a USB port, but the helmet does not connect.

  Also, I'm still not able to get bluetooth connectivity is

  Thanks to all who can help... I'm new on this forum and not an advanced user. I do not know if this laptop compatible bluetooth (blue light on f12 button lights up)

  Hi Ram38,

  Here is a document for the no sound on speakers (Windows 7) that may solve your problem of helmet. It gives control with a USB connection, you would look just for the headphones instead of speakers.

  I have my fingers crossed.

  Good luck

• Computer cannot detect the receiver of wireless Xbox 360 for window controller.

  Hello Microsoft,

  After I have tool on my computer for cleaning, the receiver of wireless Xbox 360 for window controller is not detected when I tried to plugged into computer. I have already downloaded new version 1.2 which is supported for Win 7 (64-bit). It still does not work. I tried to go to an another USB 2.0 but it's the same thing. Please help me. Thank you.

  Hello
   
   
  1. are you able to use the USB ports with other devices usb successfully?
   
  2. What is the status of this device in the Device Manager?
  See the links below for help on Device Manager.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  What is Device Manager?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-Device-Manager

  
   

  You may need to reinstall the hardware on your computer. To install the software by downloading it from the Internet
  a. go to the download section of website material Microsoft game software by following this link:
  http://www.Microsoft.com/hardware/download/download.aspx?category=gaming&type=gaming
  (b), select the type of product, select controller.
  c. in, select your product, select Xbox 360 Wireless Gaming receiver for Windows.
  d. in, select your operating system, select the version of Microsoft Windows you are using on your computer.
  e., select your operating system language, select the language used by Windows on your computer.
  f. click OK.
  g. click the link to start the Setup program.
  h. click on run.
  
  Xbox 360 accessories Setup installs the necessary files on your computer.
  Note: You may be prompted to restart the computer.
  
  You can also check out the article below which explains how to install this equipment.
  How to connect a wireless Xbox 360 controller or headset to your computer
  http://support.Xbox.com/support/en/us/NXE/KB.aspx?ID=933710&lcid=1033&category=hardware
   
   
  Hope this information was useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Logitech M705 wireless mouse no longer scrolls in the firefox of office currently using FF 40.0.2 it works in mail electronics thunderbird.

  Hi, I use a Logitech M705 wireless mouse. I'm more capable scrolling on my desktop version of Firefox. Version 40.0.2 ff. However, the scroll feature continues to work in the latest version of Thunderbird. He works also on windows games ie. Solitaire, maj jong.

  Thank you

  Hi sc2137,
  This happens for all sites?
  Please first try to start Firefox in Mode safe. Questions to troubleshoot Firefox in Safe Mode

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Installation of the H7000 HP wireless headset

  Unable to get sound from the headset.  instructions are not clear.

  It shows physically connect to the computer.

  step 1 then says to activate press in and hold the button for 3 seconds

  then step 2 turns off: press and hold the button for 3 seconds

  then step 3 pairing: press and hold the button for 8 seconds.

  following the steps in this order, I always don't not healthy nor my computer still displays the device.

  that happens because step 1 I hear a beep and then now the button for 3 seconds, I get a beep and beep, this makes me believe that step on the helmet.  But alas, no noise.

  I do not understand "twinning".  This looks like a process to establish the wireless connection.  But the helmet does not show the devices.

  My system is a HP Lenovo with windows installed 8.1

  Thanks for any input

  Hello urtheone,

  I understand you encounter problems connecting H7000 HP Bluetooth headset to your computer. You also want to know what the term "Pairing" means.

  When connecting Bluetooth devices for the first time, a registration is required. This process is called pairing. Most Bluetooth devices must be involved before they communicate with each other. When the devices are paired, they share an access code that authenticates two devices to ensure safety and wireless communication is established.

  After that two devices are paired, will automatically recognize the devices between them and then you can connect and disconnect devices easily. You have to pair again, except if the pairing is deleted on one or two devices.

  Now, what I need to know is what computer do you have? I need the number of the brand and the model. It's an HP computer or a Lenovo, it cannot be both.

  You should probably start by turning on the Bluetooth hardware on the computer until you can pair the two devices. Usually, on a laptop, it's the Fn and F3 or Fn F5 key. Or you can go to Windows 8 and turn on and off your wireless settings.

  http://www.YouTube.com/watch?v=fhuXwelEo-A

  Then you will need to go into the settings of Windows and go to 'Add a device' to add the listener. This is where you hold the button on the headset to pair the device and connect.

  Here is a video of a guy showing how to add a Bluetooth on Windows 8 device. https://www.YouTube.com/watch?v=QQZsd4Yk1nE

  If you have a Lenovo computer and still having problems connecting, you will need to contact Lenovo for more information.

  I hope this helps.

• officjet 6700 scan computer wireless is currently unavailable windows 8.1

  * Installed wireless officejet 6700 on Windows 8.1

  * Automatic update of Windows is on

  turned off firewalls

  * wireless security off

  * can print from windows

  * can copy, scan and Fax Control Panel printer

  * a given printer IP = 192.168.0.155 and able to ping and print.

  * reinstalled software\drivers Online

  software and firmware are up to date

  * the printer is 20 ft of router

  * HP Print doctor Scan fails on "Driver Check" and passes all other tests.

  * in the course of running Microsoft Security Essentials

  Problem:

  Towards the end of the installation of the software's message:

  

  "There is a problem communicating with the printer", narrow msg and install continues until the end.

  Program "HP printer Assistant" on PC click on "Manage the Scan to Computer" and get the following msg:

  

  "Scan of the computer is currently unavailable.

  If I'm going wireless connection USB "Manage Scan to Computer" function works - no error.

  HP Print doctor Scan fails on "Driver Check" and passes all other tests.

  My pc has been again in 2012, came with windows 7. So, I upgraded to win 8.0 and later to win 8.1.

  I tried everything suggested to get 'Hp Printer Assistant"to work with no joy.

  Finally I decided to reinstall windows 8.1. Updated drive and installed windows. He now works for Hp Printer Wizard of wireless - no error. Can now fax and scan of my pc.

  Something in windows 8.1 hanging upwards. Has taken ablout from 4 hours to reinstall windows. Now, I have to reinstall all my apps.

  Thanks for all the help Hp.

• Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

  My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

  I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

  I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

  I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

  I need step by step instructions on this Yes please treat me like a fool!

  Thank you

  Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

  After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

• c:\windows\system32\winspoolDRV\ is not designed to run on windows or it contains an error

  When I start my computer and enter my password, I get the following message. c:\windows\system32\winspoolDRV\ is not designed to run on windows or it contains an error. Then the following messages displays pop up. Advanced care system has ceased to function, recovery stopped working, wireless lan stopped working and I'm unable to watch videos. The message says that I need to download active x, but when I try I can not download. I also get an error message installshield #5

  Hi donabuca,

  Since when are faced with this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

  This question could be hardware or software related, to refine the question, I suggest you try the following steps:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  For more details on the update of drivers, click here

   

  Step 2: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0 x 80190001 downloading 10 win on a PC that runs on Windows 7 Home Premium.

  The error concerns a Windows 8 operating system, but it dawns on a PC that runs on Windows 7.

  Also the downloads library is registered no downloads. All downloads.

  Try to upgrade manually:

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.