Wireless is MIA after reload of the OS

Similar Questions

• Wireless acting funny after having removed the PC on the home network - router WRT54G

  Lately I had a strange problem with my wireless. Internet works fine on my laptop and computer laptop of my fiance, but I have the following questions:

  1 Vonage phone works not properly. When the phone rings, it rings a very long cycle, and then when we pick up, the line is dead.

  2 X - Box Live connection interrupts the connection once every 2 or 3 minutes about, constantly.

  3. I can't connect to my linksys config site, and when I ping 198.168.1.1, I get 100% packet loss.

  Here is my situation and how it has changed recently Wireless:

  Set - original up: Desktop connected to the linksys router, laptop of fiance the wireless, no problem at this stage. The modem is Motorola if it matters. Office calculated was used initially to set up the wireless network.

  Computer for office died and I bought my current laptop (which I use to write this post). I connected to the wireless network without existing, although during the first week, there was some notable slowly down on me and my fiance wireless from time to time. I played around with some parameters in the linksys config page and reset the router and things are back to normal.

  However, I recently bought an xbox wireless adapter and was very disappointed by the loss of connection. When I test the connection it says I am connected but my "NAT" is moderate. My config is set so that uPNP is enabled, but I still have this problem. At the same time, we noticed that our Vonage has been screwed up and had the above mentioned problem.

  Today, I tried to connect to the site 192.168.1.1 to access my linksys config page, but I can't access it and as I said, when I ping the IP, I got 100% packet loss.

  I'm at a total loss about what to do and I do not understand how internet our computer can act very well while having all these problems with XBL and Vonage.

  Any help is GREATLY appreciated. Please tell me if you need info to Add ' l and I'm going there as soon as POSSIBLE.

  To check the address IP connect a computer/laptop computer directly to the router on its ethernet port and click on Start > all programs > Accessories > guest... A black box will appear (command prompt)... In the command prompt window type ipconfig and press "Enter"... Look for Ethernet adapter Local Area Connection address IP, subnet mask, and default gateway...

  The address of a default gateway should be the IP address of your router...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - x.x.x.x (where x.x.x.x is the default gateway address), and then on enter. Let the empty user name & password use admin lowercase... It should open the configuration of your router... If it does not accept the default user name or the password then you need to reset your router to the factory settings...

  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  To open the NAT-

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and the type of box in 53, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (2) on the second line in the box, type Application in PQR, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (3) on the third line in the box, type Application in XYZ, in the start box, type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

  (4) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  5) click on Setup and change the size of the MTU to 1452 and click on save settings...

  (6) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (7) also assign addresses DNS on Xbox
  Primary DNS:-4.2.2.2... Secondary dns:-192.168.1.1

  (8) turn off your modem, router and Xbox... Wait a minute...

  (9) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

  IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box...

  For the without wire that -.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• EEM script to check running-config startup-config changes after reloading

  I'm trying to follow a bug that causes some CLIs to disappear from the running-config after you reload the router.

  The LCIs were saved in the startup-config before reloading the router.

  Is there an EEM to compare the running-config startup-config online with after reload of the router and syslog lines that are missing from the running-config?

  You could do something simple like:

  Event Manager applet config compare

  event timer cron cron-entry "@reboot".

  command action 1.0 cli 'enable '.

  cli 2.0 action command "show archive config diff nvram:startup - config system: running-config.

  post 3.0 action to "[email protected] / * /'from'[email protected] / * /" Server "10.1.1.1" topic "Config diffs" body "$_cli_result".

• Problem after setting some preferences in Firefox, it began to reload all the images in the visited web pages previously, which resulted in a significant slow

  I spend time with the preferences of Firefox where I was set up, after a few tweeaks, he began to reload all the images previously visited web pages, one of the sites where my own: http://netsalg.biz so I know that's not the question, but this resulted in a significant slowdown of the browser - what is my next step - a new installation? or can it be fixed

  try a reset to reset all preferences of firefox: Firefox Refresh - reset the parameters and modules

• After reloading of FireFox, I lost the little blue box that opens a preview window.

  After reloading of Firefox, I lost the little blue box that opens a preview window.

  When has these previews been published? Was - that when hovered you over a link? If it was you the CoolPreviews add-on?

• Satellite L550D-136 - Recvovery HDD after reloading the Image

  Hello
  I have a Toshiba Satellite L550D-136.
  For the backup of my custemised system I'm building a Windows 7 image backup.
  Can I use the Toshiba HARD drive recovery tool after reloading my own image?

  Frankl

  Your customized backup is based on the factory settings?

  To be honest I was not testing in the past, but be careful with this stuff. Create recovery DVDs using the preinstalled Toshiba Recovery Disk Creator. If something goes wrong and you want to still have factory settings once you can use this DVD for installing recovery image.

• LAPTOP HP 15: BUTTON (F12) WIRELESS LED LIGHTS AMBER COLOR AFTER STOP OF THE LAPTOP

  THE BUTTON (F12) WIRELESS LIGHT AMBER COLOR AFTER STOP OF THE LAPTOP. THE AMBER LIGHT LIKE THAT AFTER PRESSING THE POWER BUTTON ON THE LAPTOP. MEWANS TI LAPTOP DON'T SE NOT GOOD SHUT DOWN ON GIVING THE STOP COMMAND. ASK FOR HELP ON THIS ISSUE TO YOU.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• After reloading xp professional I have no audio or the audio drivers... Help

  After reloading xp professional I have no audio or the audio drivers... Help

  Visit the web page of manufacturer (on your computer) and find the section of support download & drivers of their page for your computer model and install the necessary drivers.  Those who understand the chipset (card mother motherboard chipset) and device video, audio, or network devices and so on.

  Any material support - including the software drivers that allow him to express prperly with any operating system - is the manufacturer of the equipment.

• I'm not able to get wireless internet access after entering my security at the back of my modem key.

  I recently bought a thread to get a wireless connection after you plug the usb driver proceeded to create a connectin wireless, then asked to type in the security encrypted code that did got a connection but said auto and not Internet, but bars are high and shows a connection, I hope that I have been specific with the problem iam having.another thing on my laptop I have access to the internet and typed in the security key on the back of my modem... Tenda is the name of the usb driver.

  original title: no internet access

  Hello

  Are you binder to share internet from your laptop or your internet provider cable is connected to this wireless USB dongle / device?

  If you share internet by connecting this USB to a computer, you will need to share internet on this computer.

  You must enable "Internet connection sharing", click on Start menu-> network connections-> right click on the connection to the LAN-> select properties-> click on the tab 'Advanced'-> Tickmark 'allow other users to connect through this connection to computers.

  I hope this helps.

• I have a gatewart dy 4025gz. With a ptba broadcom wireless. After I installed the drivers I gat device wont sta

  I have a 4025gz gateway with a broadcom wireless card. After I inatall drivers I get does not start code 10. Worked before I reinstalled windows. Windows xp service pack 3.

  Hello

  See the resolutions listed in the article below and check.
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

• HP mini 210-2177nr: Wireless only works after the restart. No boot from HP

  HP wireless works only after a reboot. I turned my laptop off and then starts later and exactly the same thing happens: first try, no connectivity, restart: everything works. Weird, right?  I restart my laptop and voila: everything works as soon as I log in. Every time.

  This happened with my HP netbooks and laptops still rarely - I wonder what change can cause this sometimes or other brands for example my Toshiba.

  I tried to upgrade to the latest available wireless drivers but that didn't fix it. Someone knows why.

  When I tried Windows 10 overview, I don't have this problem - it starts every time.

  It seems to be related software.

  Thanks for the link - HP - troubleshooting your wireless network computers and Internet (Windows 7)

  What made 10 Windows to solve the problem?

• No wireless connection after you restart the computer.

  Original title: wireless connection problems

  Hello my name is justin knox my girlfriends computer mobile computer ASUS laptop with windows 7 each time you turn off the laptop and turn it on my wireless connections are not available for me unless I have help it how can I get this laptop to connect instantly without troubleshooting it powers on every time?

  Hi Justin,

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you have any anti-virus program I suggest you disable and check if it helps.

  Note: Don't forget to activate once you have finished troubleshooting.

  You can also go through the steps and check out them.

  Method 1:

  Make sure that if the autoconfiguration WLAN service is set to automatic.

  1. click the Start button, type services.msc and press ENTER.
  2. scroll down to the autoconfiguration WLAN service, right-click on it and select Properties
  3. click on the tab general, select automatic for startup type.
  4. click the Dependencies tab and make sure that all addictions services are set to automatic. Then click on the OK button.

  Method 2:

  
  

  1. open manage wireless networks by clicking the Start button, then Control Panel. In the search box, type Wireless and then click on manage wireless networks.
  2. click on add and then click on manually create a network profile.
  3. Enter the network information.
  4. If you want Windows to automatically connect when the network is in range, select the start this connection automatically check box.
  5 Select the connect even if the network is not broadcasting check box, click Next, and then click Close.

  For more information visit

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  You can also turn off UAC (User Account Control) and check if the problem persists. After return from the status, so that we can help you better.

  Note: Don't forget to activate the control once you are finished troubleshooting.

  Hope that information was useful and let us know if you need help in the future about Windows. We will be happy to help you.

• After the program of doggle wireless Vodafone makes a connection to the internet, I get a Freebee screen Awards with a code number on it

  Original title:

  An outdated warning occurs on my computer just after the program of doggle wireless Vodafone makes a connection to the internet and stops everything works until I close. The notice tells me it's Freebee Awards with a code number on it to enter my reward but it is out of date and useless. How can I remove it from my Windows 7 computer.

  Hello

  1. If you connect the dongle from Vodafone to another computer, you still experience the same issue?

  2 have you made any changes to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a virus scan and make sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: All data that are infected can only be cleaned by deletion, which means that there is a risk of data loss.

  For more information about Vodafone Rewardz,.

  https://rewardz.Vodafone.co.UK/

• connect with the windows computer using usb after connecting to the wireless mac

  Printer HP Photosmart 7520 connected wireless to the new iMac using Fios router wireless.

  Can I connect the printer even to an old Windows computer (running XP) via USB without interfering with the connection Wireless for Mac?

  Hi Rekjek,

  On both wireless and USB is allowed. There should not be all the problems between the Mac and the PC using the same printer.

• keyboard randomly stops working and continues after reloading safari. Running El captain

  wireless keyboard randomly stops working and continues after reloading safari. Captain El running. He did once, using Word as well. On the occasion when his order in safari it works in Word and then stops again.  Y at - it a cache keyboard or something that needs resetting? Any help would be welcome.

  If your USB keyboard or wireless does not work

  Keyboard does not work

  Keyboard/mouse - troubleshooting wireless

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory