wireless mouse does not work in safe mode. I am informed by Logitech, it is a matter of microsoft HID. What now?
I run XP and IE. You will need to use the mouse in safe mode. normally works in normal mode.
Logitech says it's a matter of Microsoft HID.
It is literally true, but incomplete and very misleading.
See http://support.microsoft.com/kb/310496
To work around this problem, use a keyboard or a mouse, instead of a USB keyboard or mouse.
This behavior is by design.
In the case of USB input devices, so that they work in safe mode, the system must have a BIOS with USB support for input devices and USB legacy mode must be enabled.
NOTE: USB devices are not loaded in safe mode, unless the manufacturer requests and provides BIOS support for the USB device in addition to input devices.
Check your BIOS for the applicable USB settings.
Tags: Windows
Similar Questions
-
Tecra A3 - Creative wireless mouse does not work
My Creative wireless mouse does not work while the touchpad is installed.
Even if I turn off the touch pad, the seal of the mouse does not work.
Anyone know how to fix this?
Thank you
R.P.Hello
On this path, it is not easy to say what the problem is. I guess you have some software installations to your external device. Install it and it should work.
As much I know external mouse functionality does not depend on the touchpad settings.
Good bye
-
MS point 5000 laser wireless mouse does not work, but scrolling and magnifying glass works
My point of 5000 MS wireless laser mouse does not work, but work wheel Magnifier button and scroll. What could cause this problem? I there something wrong with the mouse or something should be cleaned? This is the first question I had after 3 years of use.
I have not any hardware or software changes, and the problem is constant, not specific to any application.
I restored my system to my latest backup when the mouse was working, but it has not solved the problem. The software update has not solved the problem.
I installed a different mouse, which works very well. The wireless mouse does not work on another system, I assume that it's broken and I will replace it.
Thanks for your suggestions.
-
Keyboard does not work in safe mode
Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99
Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99
With windows, access device mgr by right click on my computer > properties > Hardware tab > Device Manager button. Locate the keyboard in the list. Right-click on it and select the driver tab choose to uninstall the driver. Now, click on the button to update the driver. See if this will solve the problem.
Kind regards
Joel
Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/
-
HP wireless mouse does not work most of the time
Original title: problem with my wireless mouse
I have a problem, my wireless mouse does not work most of the time it's repair turning market sometimes, sometimes resembles
dead, what is the problem I have the latest driver updates everything was ok, but 3 days ago, when I try to use it I see that it does not work
now I can't use it, I try to restore my computer but locks is not any point of restoration and I plug a different usb port on the port still does not, for more than 2-3 minutes sometimes work! , look at these pictures when my mouse is not working the red light does not work!What should I do I have this mouse for 3 months when I buy with my hp touch desktop
Thanks so much, I change my batteries and now works seems once again, the batteries will go fast
can u help me to fix the error, I'm showing you pictured RunDll -
HP laptop: wireless mouse does not work
After mobile update on oct 6th wireless mouse is not working.when I am looking for in the receiver 2.4 g device is here.
I did a hard reset but it does not. The mouse is iball freego 2.4 g wireless optical mouse
and even when I went to download a software to reinforce the msg me: "We have couldn't retrieve the list of drivers for your product." Help out me
Hello;
Let me welcome you on the HP forums!Sorry, but if your talk to get the mouse drivers from HP, what's not at work, such as HP does not include drivers for the hardware not HP.
Have you tried to download the drivers from the manufacturer of the mouse?
You must go to the settings, update & Security-> Windows Update.
Then, choose Advanced-> history to see when the updates have been applied last. If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem. Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.
And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html
If the appropriate device adapter is no longer present in the Device Manager, what MIGHT work is something known as a repair installation. It is less destructive of all Windows recovery features and rewrites the Windows system files, leaving your apps, settings and data intact.
To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.htmlGood luck
-
All of a sudden my mouse does not work. I tried to do what he says to do to another person, but he has not shown in Device Manager, device usb in the list
On Sunday, February 12, 2012 17:32:58 + 0000, lisabellalord [MVP] wrote:
You have changed the batteries? The batteries can go fast enough in a wireless mouse; they will also without any warning, a minute of your mouse works, next day it doesn't.
I'll add my Ditto to that. I played a bit with a wireless mouse for
only a little time and he abandoned entirely for exactly this reason.Ken Blake, Microsoft MVP
-
My Microsoft 2000 wireless mouse does not work
Good then when I changed the batteries in the wireless mouse, the led will turn green and then all go off and my mouse does not work, even when he is on the Green, green light is only on during a few seconds.
Hello
Please see two items of the below knowledge base for help.
Troubleshoot a wireless mouse that does not correctly
http://support.Microsoft.com/kb/321122
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398Kind regards
Afzal Taher
Microsoft technical support engineer -
HP wireless mouse does not work properly
ORiginal title: HP wireless mouse
Sometimes the mouse does not work properly. For example - the cursor will stop pulsating and move to the beginning of the sentence to the place where I want to go. It seems to freeze. I tried the convenience store, but he said he couldn't identify the problem. Please notify. Thank you.
Hello
1. What is the model of the mouse?
2 did you do changes on the computer before the show?
Method 1: Reinstall the mouse driver
a. click Start, typedevmgmt.msc in the start search box and press enter
b. right-click on the device and click on uninstall. Restart the computer and allow the driver to install.
Method 2: update the driver
See the following site:
Updated a hardware driver that is not working properly
http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.
-
Original title: restoration works not
The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.
It works for some configurations.
-
Wireless mouse does not work after update Vista graphics driver
Hey whats goin' I'm looking for a little help here Irecently downloaded a new graphics driver on my laptop and rebooted... suddenly all OOF, mouse not working anymore... What do I do?
* original title - my wireless mouse died after I downloaded a driver what should I do? *
Hello
The video driver may be accessory to the mouse does not.
Reboot again. If the mouse still does not work, check the batteries in the mouse and receiver
connection. To the need to update or reinstall the mouse drivers - check with Microsoft Hardware, LogiTech
or anything done to the mouse for the latest drivers.==================================================================
If this seems to be a USB problem AFTER the foregoing:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
wireless mouse does not work! * help
I bought new silvertec mouse, model bp06. Which is a wireless mouse. I use Windows 7 64 bit .the mouse contains a usb adapter. I plug in the adapter into my usb port it started to install the driver, is first hid wireless mouse, then the usb driver, but he could not install. I tried more then 10 times, still does not work. I go into the control panel-> hardware and seen my usb hid adapter that is enumerated. But I see NO "INSTALLED". And I still can't use now.please help me!
Hello
I appreciate your efforts and patience. Please write us with the following details.
You are able to use other devices when you connect via USB?
I suggest to follow the steps in the link given below and check if it helps you.
What to do when a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly
If you still experience this issue I suggest you please contact the support team Silvertec wireless mouse for more help. You can contact them on the link below.
http://silvertec.com/products_detail.php?id=90
Let us know the status of the issue, we will help you.
-
Bluetooth mouse does not work after the mode 'sleep'.
My Logitech bluetooth mouse Mouse loses communication after coming out of sleep mode. The mouse does not appear in the devices Panel and will not resync. To retrieve it, I have to restart, and then remove the bluetooth devices control panel mouse and then add the device again.
When installing Win7, he acknowledged the mouse without having to manually provide the drivers. I checked the Logitech website, which doesn't have to download disponibilitepour drivers win7.
The question is not limited to the mouse as a bluetooth speaker system has similar problems with sleep mode.
Someone knows how to solve the problems of Eve Win7 bluetooth?
John
System: Computer laptop Dell M1330, mouse Logitech V470 bluetooth, Win7-64 Edition home premiumFor the mouse in the right mouse click Device Manager, select properties then power management and disable the setting allow turns off to save power.
For other devices, check the equivalent power management settings.
-
My printer just does not work in safe mode. I have Windows vista.
My computer keeps closing, the blue screen of death coming up next, then it exports. I can not restore because cannot me whille in safe mode. I am trying to print some documents in safe mode, and it does not allow me. It is said that it does not recognize the printer. Any suggestions on how I can get my printer to work. I have not found what is the cause of blue screen of death. It's a dell computer and after paying $ 50 to help out, there me no where. I'm back a square.
You cannot use the printer mode without failure. Copy documents and other files you need to a USB key or external hard drive. I can't help you on the stop the down without knowing the text of the Stop (blue screen) error. Offhand, it sounds like a faulty hardware, but without knowing anything further is just a guess. MS - MVP - Elephant Boy computers - don't panic!
-
Firefox hangs before opening, but does not work in safe mode
Firefox start, sometimes the browser window will open, but either way it hangs completely seized of the charges. I can open it in safe mode and have tried the suggestions of "Troubleshooting extensions and themes", but it hangs still, even with all add ons and extensions disabled, after removing and reinstalling the latest version of Firefox and reset the toolbar.
Your crashreport:
https://crash-stats.Mozilla.com/report/index/BP-f144bda2-12d0-4a31-94f8-318662111109
This is caused by report of Trusteer. Try to disable it and see if that stops the noise.
You can stop the report by using the Start Menu > programs > Trusteer report > report stop
You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
http://www.Trusteer.com/support/en/report-problem
According to the user in question 892517 Trusteer is aware of the problem and working on a fix.
See also Bug 699776 - crash of nsXPTCStubBase::QueryInterface involving a RapportTanzan7.dll in the stack.
Maybe you are looking for
-
I have lsot the line in the spaces of the toolbar include 'file, edie, veiw, bookmarks, history, help' etc. ICAN get it by pressing Alt + F8, but it will when I press another button. How can I restore it permanently
-
Hi all I have an application that uses the report generation tool to print tickets for a printer file. Usually, it works very well - I 8 existing facilities where there is no problem I install the software on a new site that uses a printer Epson TM-
-
Change the e-mail address of the parent safety for the family
I have two accounts of Microsft in use. The first is a Microsoft e-mail address no I have soon will no longer access to the but is used as my connect to a PC of Windows 8 and is related to my security for the family of the children report. Then I h
-
What is the problem with the built-in firewall in which accompanies the VPN client? Is it good enuff to use with split tunneling, and it is always the same if the tunnel is not mounted? Nick
-
BAD_SYSTEM_CONFIG_INFO
Hi, I had this on my PC (Windows 8) earlier BAD_SYSTEM_CONFIG_INFO. What should I do? I need to recover my files. Thank you