wireless network-marketing online

Similar Questions

• XP is connected to the wireless network but can't get online...

  I have a wireless network that works very well with my computer laptop and desktop so its punt in Mac OS, but when I boot XP, it cannot get online. He sees the network and says I'm connected but IE and Firefox keep the display of error messages telling me that they can't connect. If I click on the icon of repair under wireless network connection settings, it would loop forever in the IP address area you are looking for. I figured out how to manually enter the IP address and the error is now in the clearing the DNS cache.

  I also tried implementing the wizzards and messed with the different service settings, but still no luck.

  Does anyone have an idea what I am doing wrong or what needs to be done to get this connected to the internet?

  Why windows is so difficult? my Mac is hooked up very well with little effort.

  I'm so frustrated. Help, please

  If you are connected your computer must be able to connect to the menus wireless router and have an IP address valid (169 . xx.xx.xx isn't a valid IP address).

  http://www.ezlan.NET/example/lan_details.jpg

  -------------------

  Maybe this can help, http://www.ezlan.net/wireless.html

  Also make sure that the security software on your system does not block the connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Flea market Vista laptop connects to the wireless network

  Hello

  I just got a computer mobile opportunity and I can't connect to our net at all. We have another laptop and a PC that both executed 7 that connect to it no problem at all. It is very strange that the laptop works perfectly, displays the connection, but point blank refuses to connect! I wonder if it is because it is not password protected? (I know, I know, but the PC does connect to him otherwise, that's weird). Any help is most appreciated!

  Hello

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Printer offline wireless network

  Hello

  I have a wireless network at home printer and a USB printer to the office. The scenario is like this.

  I use a laptop with Vista.
  At home, I put my printer wireless as a default printer.
  I print some documents and everything's fine.
  I go to the office and forget to change the default printer.
  Of course, when I try to print it goes to the wireless printer which is now in offline mode.
  Now when I go home and connect to the network, the printer is still showing in offline mode.
  I expect the printer to launch the online display once connected to the home network.
  I am not able to find a way to put online.
  I tried turning the printer market and resume all documents.

  The only way I found was to delete the printer and add it back into the printers menu. However, it's tidious.

  Is there a simple solution to this problem? I get in this situation several times and need an easier solution.

  (Note that my laptop is in hibernation when I close the lid. It is not completely stopped.)

  Thank you.

  Mike.

  Hi Hdhavali,

  Try this step.

  1. click on Start, type printers in the start search box and press ENTER. This will open a window with a list of the printers currently installed on your computer.

  2. double-click on the icon of the printer that you want to change online. It will open a pop-up window describing all current print jobs.

  3. go to "printer" in the menu bar of the pop-up window and uncheck the box 'Use printer offline'. This action will change the printer from offline to online mode.

  If that's not enough then you may need to delete and add a printer as you may have guessed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Previous post: the result.

  Bindu S -Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• HP Photosmart C4780 connects not (wireless) on Mac or wireless network

  Sorry for the long post, but please someone help me!

  I bought my new printer a few days (actually 14th) and began to implement on my MacBook Pro with my Wi - Fi, which is routed through a Linksys router and mainly through my desktop computer (a PC with Windows XP). I used the CD that came with the printer to set it up on my Mac and it has set up the fine by USB, but when I try to set up the wireless, I get the following message:

  "Device not connected: to configure the network settings for the selected device, please connect via USB temporarily." The device can be disconnected from the USB once the network settings are transferred. »

  I reconnected and got the same message over and over again, so I decided to set up on my desktop computer instead. This does not work either and I got the same message on my desk I have on my laptop. Uninstalled on both computers, reinstalled and I STILL got the same message. At this point, I'm about to throw all the electronics in my bath tub and be done with them but on the contrary, I checked (and double checked - and triple checked) my router via my browser settings, fact that I know the SSID and the password and reconnected to the network through my laptop... Once again, the same message. I tried the network installation of push, the installation of the network PIN, I feel I have tried everything! Probably miss me something small, but eyes fresh is always an asset.

  Can someone help me? I printed a Test report of the network so that a Page Network Configuration and settings I received both... if need be, I can post the information from my router, in order to verify to implement, but after two days of trying to implement something that should have taken ten minutes (sometimes) I'm at my wits end.

  Network Test report:

  "Your HP printer cannot find your wireless router. Check our wireless router has power. Make sure that your network (SSID) HP printer name exactly matches your router (SSID) wireless network name. If they do not exactly match, run the installation of the wireless network to set up your HP printer. »

  How to change the network name of the printer to match?

  Summary of diagnosis:

  Wireless on: PASS

  Wireless work: PASS

  Find the network name (SSID): FAILURE

  Security: PASS

  The printer settings compatible with the wireless router settings: does not work

  No filtering: does not work

  Related: Does not work

  Signal strength: does not work

  Other networks detected matching your network name (SSID): does not work

  Detected wireless networks: 1

  Downlink Count: 0

  Channel: Does not work

  Although I was given my SSID (which does not match my home network - but how can I change this?) and my MAC address (I guess for the printer), so I didn't have the IP address of my printer has no way for me to get online to check all the settings! Is there another way to get this IP address?

  Summary of configuration:

  Communication mode: Infrastructure

  Authentication type: open

  Encryption: no

  ______________________________________________________________

  Network Setup page:

  General information:

  Network status: offline

  Type of connection: no

  URL to Web server integrated: http://0.0.0.0

  Firmware Version/Hostname/serial number were all given

  Admin password: not set

  802.11 wireless

  Hardware address (MAC): data

  Status: disconnected

  Port 9100

  Status: enabled

  mDNS

  Status: enabled

  Service name: Photosmart C4700 Series [6 last digits of my MAC address]

  SLP

  Status: enabled

  Microsoft Web Services

  WS discovery

  Status: enabled

  WS Print

  Status: enabled

  PC connected (s)

  Address IP/hostname: (nothing is here) Time since last access (mm: SS): (nothing is here)      

  Number of 802.11 networks discovered: 1

  (my correct information of wireless network is here, including the SSID, Mode (Infrastructure), BSSID, Channel, privacy (RSN), Auth (WPA - PSK), Encrypt (TKIP-AES), Signal and WPS (no))

  Help!

  Did you read this on your Verizon FIOS router? : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Connection-problems-with-Verizon-FIOS-Actiontec-routers/td-p/892967

• Satellite 1900-303 and wireless network?

  I just hand on one of these laptops. However, there is a switch that seems to have a Simbel wireless on the right side of the machine and a light symbol on the front that does not appear in the manual for this laptop wireless. Anyone know if this phone has the ability to internal wireless network? What does this switch and the light? How to activate it etc?

  Any help much apreciated

  Al

  I bought the same laptop new 2 years ago and in the manual, there was an addendum explaining that if there were an equipped module as a dealer option then the machine was Wi Fi... The symbol on the front lights up when you press the switch on the right side when a Toshiba module is mounted but not if you use a card pc as a Belkin (which I use)... Please see response below Toshiba.
  ==============
  The internal Wireless LAN Mini PCI card is no longer supported.
  The option of Toshiba part number was PA3212U-3MPC (Wireless LAN Mini PCI Card
  -2, 4 GHz, 802. 11B - dealer Option). You can check with our sales
  and Marketing shop Toshiba team on 0870 444 8944 to determine if
  stocks remain and if so, information on prices.

  The LED on the laptop only turns on when you use the internal wireless
  LAN Mini PCI card. When you use the PC as the Belkin card LED will be
  does not light. If the Belkin card works and meets your needs, then we
  suggest that you continue to use you this card.

  Concerning

  Customer Contact Center
  Division of information systems
  Information systems of Toshiba (UK) Limited

  Hope that solves your query,

  Considers that Russell.

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul

• Satellite Pro L450-13 q (PSLY1E) - XP driver for wireless network card

  The system has Windows 7 pre-installed and has Windows 7 recovery DVD.
  I searched online and found that some packages also include Windows XP Professional as a downgrade.

  This was not included in my package, I received.

  I managed to get most of the drivers for XP, including graphics and sound card.
  But at the present time, I have not been able to locate the driver for the wireless card.

  Can anyone help?

  Thank you very much... Mark

  Hi mate,

  I think that you should look for the Toshiba WLAN drivers WLAN Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Normally you will find all the drivers for wireless network cards in all laptops Toshiba so it s worth a try! ;)
  Moreover, what WLAN card you have exactly?

• Satellite L500-13z - Windows 7 does not recognize wireless network adapter

  Hello

  The Windows 7 RC Device Manager does not recognize my wireless network adapter (for example: Atheros, Intel or Realtek). I tried to install all the Toshiba support drivers, but none of them work:

  After installation, they ask me to connect the unit to my computer (of course it is still on the motherboard!).

  =>, Is there a way to know what is my Wifi adapter?

  that one failed: http://aps2.toshiba-tro.de/kb0/HTD7201PO000SR01.htm (this is the only Word to say "network adapter" with a yellow exclamation point).

  -Online someone knows when will be released Windows 7 drivers on the website?

  Hello

  Before you begin to install all drivers WLAN you can find on the Toshiba site you must make sure that wireless network card, you have exactly. You can check in the Device Manager-online properties-online Details of the local network adapter device.
  Need you an information like PCI\VEN_XXXX & DEV_XXXX

  If you have based this information you are looking for with these terms on this site in order to determine the exact WLAN card:
  http://www.PCIDatabase.com/

  After that, you can download the driver appropriate for your laptop. Before installing, you must uninstall all other versions and restart the laptop.
  Also, make sure that the WIFI is enabled with the hardware switch and FN + F8.

  Welcome them

• Wireless network not always connects successfully on HP ENVY 5644

  Just bought a new HP ENVY 5644 device to replace an existing of my HP Photosmart C4380. The new device for the first time and ran through the initial configuration using the built-in touch screen. Everything seemed to be going easily and smoothly, without any error and even connected to my home wireless network on the first attempt.

  I then tested the printing and scanning of the characteristics, which each provided extremely pleasant results and good performances on the wireless network.

  Unfortunately, this is where my story ends happy and boredom begins!

  After initially set up the device in a temporary location, I've properly turned off to transfer it to its final resting position. Even if it were in another room of the House, it was actually closer to the router of network wireless itself. In reality, we are talking about a very significant distance that the 2 rooms are in fact back to back each. So, now with her in her new role and connected to a power outlet, I turned on the device once more. The powers of the unit upwards and the blue light that indicates the status of the wireless connection, continually flashes blue rather than a blue fixed solid. Blinking blue indicates that the device is unable to establish a wireless network connection. If I use the touch screen to investigate the matter, I think there seems to be an authentication problem and the details of the message are bad password (WPA) wireless entered.

  Why has this happened? Nothing has changed, everything that I've done is not move the printer in another room!

  Believing that the touch screen tells me, I decided to run the Wireless Setup Wizard once more to confirm the wireless network settings. As expected, he manages to find my home wireless network without any problems and then requests the password key has been entered. I go so it correctly and press on apply. It is at this time that the device tries to connect to the network, that unfortunately crashes, return the above error message. However, I know that I entered the password correctly, in fact, there is an option to display the password that you entered before attempting the connection, which, while they inspected, confirms that the password that I entered is good!

  Then why does it not connect?

  I tried to turn on the wireless feature, turn off several times via the touch screen interface, but this has not solved the problem. The only way to get the connection Wireless online is to keep turning on the unit, switch off again until the wireless light solid blue. Without apparent reason, wireless seems to have a mind of its own, only connected to my wireless network when she wants to!

  I have no problems with many other wireless network devices I have in my house, from several manufacturers and even located in other parts of the House. I know that my wireless network is good and I know that my password wireless like the back of my own hand, so there is no chance of which is incorrect. It is purely a problem for the HP ENVY 5644 itself, device which can be confirmed by the fact that if I turn it on and turn it on again, it could decide to establish a successful connection even if I have nothing to its own network configuration, or my own configuration of wireless itself.

  Ask yourself whether or not it might be of some obscure incompatibility between my wireless router and the HP ENVY 5644, I tested the unit with another router to spare than I, who was also from another manufacturer but unfortunately the result is the same, the HP ENVY 5644 connected only when he wanted and would establish only the network connection Wireless when switching on the device. If the connection fails, it will never connect to the network unless you turn off and turn it back on, which may require even been attempted several times before success. Once connected, it seems to stay connected and then works really well.

  This behavior is not acceptable and I'm sure that's not too healthy for the device itself to be turned on and off again at these short cycles. Otherwise, overall, as I said earlier, I am very happy with the product.

  Can someone at HP tell me why this is happening or suggest what I need to seek or consider.

  Talked with HP engineer the other day. I explained to him what was going on and they suggested to do a factory reset and then set the IP address manually rather than using DHCP from my router wireless home.
  
  I wasn't too happy about it as everything has been well installation and work, except for the WiFi do not reconnect all power over. I also had a go better, adding a DHCP reservation in my router by using the MAC address of the printer. Indeed, it is the best of both worlds that the printer will be given the same IP address by the router whenever he asks for one.
  
  We agreed to leave things as they are rather than the reset of the printer and I would now turn off the printer every day. For the last 4 days, the printer has reconnected to WiFi at all power over. This is excellent news.
  
  I have a call on request with HP in the coming days to discuss how things are going. If everything continues as it is, it would seem that to specify that a wireless router DHCP reservation solves the problem. While I wait for the next call to HP, I continue to power on / off power to the printer on a daily basis.
  
  Watch this space!

• OfficeJet Pro 8625: HP8625 sleep mode/wireless network connectivity

  I recently bought an OfficeJet Pro 8625 and it worked fine for a few days, with everyone in the House, being able to print wireless connection network (Verizon FIOS via an Airport base station).  However, now it won't keep (or restore) a Wi - Fi connection after going to sleep.

  I can get the printer to work, if I turn it works, then immediately print (but only one machine... If I need to print from two different computers, I have to restart again to use the second computer).

  This is the case for all computers in my house - using several OS X (El Capitan, Mavericks and Snow Leopard) and the other with Windows 10.  I tried the troubleshooting tips that I could locate, and the firmware is up to date.

  I should be able to send a document to the printer from anywhere in the House, from any computer, without walking to the printer and restart it first.  A network printer should be sprained able himself, reconnect to the wifi and print jobs sent to it, but mine doesn't.

  How can I solve this problem?

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Now last thing to do once everything above has been tried and you still have the same problem, completely uninstall and delete the printer and its software.

  Use http://www.iobit.com/en/advanceduninstaller.php and powerful Scan at the end.

  Now go back and reinstall the drivers and full software on the HP website.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• Sharing on a wireless network

  Hope this is right forum thr. Ive has set up a router to a pc and a laptop to share bandwidth network. Works ok but can share the printer connected to the PC?
  If so, how can I get the laptop to find the printer?

  Hello

  I don't know if this forum is the right because your question is not specific for laptops. Response to this kind of question you should look for on some forum for wireless connection.

  In any case, I didn t try this yet, but in my opinion it should market. Check the connection on your PC's wireless network properties. Here, you must activate the option files and printers for Microsoft networks.

  Good luck!

• Satellite P300 PSPCCE: Atheros AR9281 wireless network adapter are not all networks

  I have a Satellite P300 PSPCCE with Atheros AR9281 wireless network.

  After a clean install of Windows 7, I can't see wireless networks, unless I connect an Ethernet cable to my wired network card.

  As soon as I take the cable on wireless networks disappear. This computer had Vista and it worked fine there. I tried latest drivers available from Toshiba, but that makes no difference.

  I have tried disabling the wireless and turn market as well with the FN and F8 key and switch on the front. I also tried to uninstall. But it's always the same.

  If someone has had this problem and is there a solution to this?

  Bjarni cordially

  Hi mate

  To be honest I never did experience even with a WiFi card and I have no idea why the LAN cable affects WLan card functionality, it makes no sense to me!

  First, I recommend that you check the settings of the router and reset if necessary
  In addition, you should go to the s for laptop BIOS settings and set its default value.
  Check the version of the BIOS if newest is available, then an update would be worth a try

  You use the Atheros Wlan configuration tool?
  If this is not the case, try this out!
  It s a configuration tool that could be used instead of owning windows wlan settings

• Unable to connect to my wireless network

  I recently discovered that my wifi for vista would not connect to the internet even if the signal is 100% solid.

  My wireless House has a WEP encryption and it has already been saved on the laptop but since yesterday it ask me the WEP key when I try to connect it and wouldn't connect even if only the WEP pass has been entered correctly. The message that usually appears at the end is "windows is unable to connect, try the other network", even when I tried my companion's unsecured network.

  Here's what I did so far, but without success...

  I checked the Wireless driver from Device Manager and it works properly. I even try to update the driver and received a message that the driver is 2-update.

  Here's what I got when I tried to use "ipconfig/all".
  ..................................................
  Windows IP configuration

  Name of the host...: AZOU
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbp
  s USB 2.0 network adapter
  Physical address.... : 00-22-5F-36-AE-19
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-7A-3C-AE
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::1ad:202c:5412:8070% 10 (Preferred)
  IPv4 address...: 192.168.2.35 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: May 2, 2009 19:58:15
  End of the lease...: June 9, 2145 03:09:10
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  194.168.4.100
  194.168.8.100
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  I can use the Ethernet cable to connect and this is killing me lol seriously... can anyone pls help me, I want to get this working wireless!

  Thank you

  Hello!

  What computer Toshiba laptop and OS do you have?

  In your case, I would check the Web from Toshiba site for an update of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried to reset the router? Unplug the AC adapter from the router, wait 5 or 10 minutes and then try again.
  Another laptop works on the router?

  Good bye

• 'Wireless network device has been disabled' - Satallite A300

  My mother bought this yesterday and shes already been buried under problems, the transfer cable has absolutely nothing of his portable od (although I think that this is the problem, not a new) and when trieing to connect wireless to our network, a message appears "the wireless network device is disabled. Please turn on the camera. "appears...

  ADAPT bit at the front is now in a position to market... and the lght wireless is also on... ive tried Fn F8 also and nothing happens... Although in the essay the Fn brightness key does not change so I think that maybe there is a problem there too although im not familiar with vista.

  With the wireless, he has not yet received up to even looking for a network connection... and connects fine via ethernet... cable please help me with connection problems and a side note advice with other problems.

  Not sure of the computer laptop cos he got just spilled on my knees with a "fix it": p

  Hello

  I put t know what that card WLan you have but you should try to reinstall the WLan driver.
  Go to Device Manager and check first your WLan card.
  Then download the page of European Toshiba driver WLan driver.
  Then delete or uninstall the old drivers WLan (Device Manager) and install the new downloaded drivers.

  Reboot the laptop, and then enable the wireless using the antenna WLan switch and the combination FN + F8.

  If you are not familiar with Vista and don t know how to use the Wlan under Vista OS and then google and you will find many pages that describes how to set up WiFi network.

  Check it out!