wireless router does not work

Similar Questions

• WRT54G2 - wireless router does NOT work well cable IS

  What can I do about it?  Just buy a new one? I had a friend coming geek and he said something burned where he SPOKE.  Can someone offer any other explanation as to why wireless should be pickin the signal

  As you are able to go online from your wired computer, you can connect to the Setup page of the router from your computer by cable and make the changes on the part of your router wireless.

  When you connect to the router interface, click on the Wireless tab, below, you will need to select the Option "Manual Configuration", then change the SSID of a wireless network in your name name and below changes the 11 wireless channel and let the SSID broadcast should be enable, then click on save settings... Once you return to the page, and then you click the sub-tab "Wireless Security" and change the WPA personal security and in the Sharedkey or Passpharase enter your security key and click on save settings...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect... If you are still unable to locate your wireless network, then I think that you need to update the firmware on your router...

  Go to the Web site template linksysbycisco.com/downloads...insert in your serach tab... select the correct version of your router router... Download the firmware file... save this file on the desktop...

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router... In the address bar type - 192.168.1.1... Leave name empty username & password admin lowercase usage...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re - configure all settings of your router, check here if you are able to locate your wireless network, if yes, then try to connect. Once connected to the verification of wireless network if you are able to go online.

• "Wireless radio does not work" when the Diagnostic tool is run

  Recently, I unplugged my C309a HP Photosmart Premium and he moved to a new Tablet next to my main computer.  Wireless network card works perfectly before the move, and now it does not detect networks to connect to.  I have run the wireless network test report and it says "Wireless Radio does not work.  Contact HP support. "I can do here to help solve this problem, or I have to pay for repairs somewhere?  I want to believe that this HP product can support more than a simple passage of one shelf to another...

  Any suggestions would be greatly appreciated!

  * Note * I know my network works correctly (because I'm connected to it now...).  My computer detects my network as well as several others in the neighborhood.

  Is the printer still under warranty?  If yes you can not he repaired, but it can cost almost what a new printer costs.  Here is how to contact HP.

  Your printer must be able to work with USB and it should also be able to be connected to your router with an Ethernet cable.

• my wireless keyboard does not work with windows xp

  Hello

  I installed osx el capitan yesterday.

  My wireless keyboard does not work when I'm on windows xp. For the mouse is ok.

  And no problems with OSX el Capitan.

  Thank you very much for the help.

  Boblecingle

  Windows XP is now fifteen years old.

  Are using you it on a Mac somehow, for some reason any?

• Tecra A3 - Creative wireless mouse does not work

  My Creative wireless mouse does not work while the touchpad is installed.

  Even if I turn off the touch pad, the seal of the mouse does not work.

  Anyone know how to fix this?

  Thank you
  R.P.

  Hello

  On this path, it is not easy to say what the problem is. I guess you have some software installations to your external device. Install it and it should work.

  As much I know external mouse functionality does not depend on the touchpad settings.

  Good bye

• Tecra S1: Rf Ubuntu wireless switch does not work

  Hi all

  I recently bought an Intel mini-PCI wifi card for my Tecra S1 under Ubuntu. It is detected without any problem, Intel provides even native drivers for Linux. However, the hardware to activate wireless switch does NOT work. According to iwconfig, the radio is off. I use the ipw2200 driver which can detect the hardware and the software rf_kill. I can enable and disable software killing RF, but kill him material stays on.

  I suspect that the radio feature is disabled in the BIOS but I don't have Windows running on the laptop over to change the setting. Is it possible to access BIOS options under linux? Toshutils are not supported by the tecra because she seems to have a Phoenix BIOS.

  I hope you can help!

  Edwin...

  Hello

  Tecra S1 supports BIOS Toshiba you can access BIOS by pressing ESC at the beginning of the startup.
  In any case I think you won't find anything in the BIOS.

  If you are not able to use the switch of material on the side of the laptop then the Wlan card is not compatible or the hardware switch is malfunctioning. I would say that the card is not supported.

  Maybe the insulation of the 13 pin might help please check that this son:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19843&MessageID=74074
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15228&MessageID=56522

• Satellite Pro L40 - wireless adapter does not work - Vista

  I recently had some problems with my laptop.
  A couple of weeks, I put in a disc of OpenSuse.
  It's not stable anything, but locked me out of my original Vista operating system.

  I reinstallled Vista Home Basic, but there are a few problems.
  Mainly, my wireless adapter does not work.

  When I flip the button to turn it on nothing happens and it is not recognized in Windows.
  I installed Atheros Driver, but still nothing happens, light is not yet.

  Any advice?

  Hello

  First check the device-> network adapters area manager
  You see the WLan card? Or the unknown device appears?

  If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

  Remember that your wireless network card? Maybe it was a Realtek WLan card?

  If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

• HP Pavilion g7-1365dx: wireless keyboard does not work.

  I have a combination and connected mouse microsoft wireless keyboard to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help.  I bought a new Logitech mouse and installed the new USB connector and the mouse worked flawlessly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USB connector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  CJB - 10 wrote:

  I have a combination of microsoft wireless keyboard and mouse connected to my laptop.  The mouse recently 'died' and replace the batteries with new Energizer batteries did not help. I bought a new Logitech mouse and installed the new USB connector and the mouse works perfectly.  However, the wireless keyboard does not work now.  If I reinstall the 'old' or the original USB, the wireless keyboard connector works fine.  The new mouse does not work with the original USBConnector.  So now I have two USB connectors that are connected to the computer to make the functional keyboard and mouse.  Is there a solution to eliminate one of the USB connectors?  I realize that the brand of the mouse and keyboard are different.  This is the problem and if so can it be fixed?

  Hi ECJ-10,

  Well, you answered your question yourself. They are different products, so you need 2 USB receivers.

  The alternative is to get a replacement of microsoft mouse if it is still under warranty, they usually do.

  Hope this helps.

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• Pavilion DV6 6c14nr: Wireless button does not work

  Has taken the plung and improved my DV6 Win10 laptop to see how it works.  Had to do a clean install, because no upgrade would not work.

  After installation, the wireless button does not work.  LED stays red all the time, and when I push it, it activates / deactivates the airplane mode.

  Check the support site HP for this PC, downloaded and installed the driver wireless Win8 button (sp59835) and it does not work. Button LED stays red.

  Searched these forums and found another driver (sp64043) from the button for Win10 wireless driver and installed it.  Still does not work.

  Information on equipment is: ACPI\HPQ6001\2 & daba3ff & 0

  The details for the wireless button said drivers this devide requires additional installation

  Unless I can get the wireless button to work, I'll be forced to go back to Win7.

  Help, please.

  UPDATED - so others find this post know what works!

  Restored image backup Win7.

  Disconnected the LAN cable and activated the wireless button.

  Win7 removed and properly installed Win10.

  Wireless button works NOW!

  So basically, if the wireless is turned off before the Win10 install, it remains disabled and then nothing will allow it.

• Cannot install WIndows XP SP3 - wireless adapter does not work with any package of service beyond 2.0

  original title: wireless adapter does not work with any package of service beyond 2.0

  I have an AirLiink 101 wireless adapter.  Anyone know how to change the service pack 3.0 for me to update my Windows XP?   Can not install 3.1 without losing wireless connection.

  Thanks for any help.

  If you are on a wireless connection, try to switch to a wired connection and try the download with Internet Explorer.

  UTC/GMT is 06:49 on Wednesday, April 11, 2012

• MS point 5000 laser wireless mouse does not work, but scrolling and magnifying glass works

  My point of 5000 MS wireless laser mouse does not work, but work wheel Magnifier button and scroll.  What could cause this problem?  I there something wrong with the mouse or something should be cleaned?  This is the first question I had after 3 years of use.

  I have not any hardware or software changes, and the problem is constant, not specific to any application.

  I restored my system to my latest backup when the mouse was working, but it has not solved the problem.  The software update has not solved the problem.

  I installed a different mouse, which works very well. The wireless mouse does not work on another system, I assume that it's broken and I will replace it.

  Thanks for your suggestions.

• Wireless device does not work after downgrading from Windows 7 to Windows Vista.

  Original title: wireless device does not.

  recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?

  If your computer manufacturer does not have Windows Vista drivers available, you're probably out of luck.  Without drivers for these devices will not work.

  'spyc' wrote in the new message: * e-mail address is removed from the privacy... *

  recently, I got my os from windows 7 to vista, now my wireless device does not work. I checked the Device Manager and the report shows that my network controller driver is not installed and the modem on high definition audio bus device. I tried to install it, but in vain. What should I do?

• The wireless radio does not work

  The wireless radio does not work on my HP Photosmart C309a (Vista 32 - bit) - support contact HP on the wireless network Test report

  The number of UK should be 0844 369 0369

• My wireless button does not work.

  My wireless button does not work to turn my wireless on it gloves just a red color. It's do the same thing on my vista and win 7 on my laptop it's a chrome bar on top that comtroles my game functions and the player on the right side and fast is my wireless button that does not. on my win 7 lap top, however the other keys work always but on my computer vista laptop they have stopped responding. I can't turn on the wireless another way?

  I already did everything and all the updates possible i ' v deleted the drivers and reinstalled and updated their new. I haven't done a complete system and reinstalled format yet but I want to avoid this.

  
  

  Hello

  In most cases, if the physical button it is an indication that soemthing is wrong with the wireless hardware.

  If you are still under warranty contact the assistance of suppliers of the laptop.

  Jack, MVP-Networking. WWW.EZLAN.NET