Wireless Solo 2 promotion

Similar Questions

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports

   

• Paved tactile and G550 keyboard do not work when I remove KB and mouse wireless

  I have a G550, which works very well. I bought a keyboard and wireless Microsoft mouse and they work very well also. Recently I had to take the laptop on the road and I didn't take the big KB wireless. But if I take the little thing USB wireless, the keyboard and the touchpad on laptop NOT WORKING. How can I solve this problem? Thank you very much!

  PS: This laptop is a bargain! I bought new from Office Depot last year during a promotion of the tour-of-your-old-mobile and paid about $ 400 for it. I've also upgraded to professional Windows thanks to a college. I am extremely pleased with this machine and can't believe that I got it for a price as low.

  Hey johannfu,

  When you have connected wireless keyboard, was the keyboard and the touchpad works on the G550?

  otherwise and only the Wireless Microsoft keyboard worked, then it is a strong possibility that the pilots who came from the crushed wireless keyboard drivers for your G550 keyboard and touchpad.

• WRT610N > usb > ioSafe Solo 1 TB

  WRT610N worm 1 (Firmware Ver: B15 1.00.03) via USB to ioSafe Solo 1 TB (NTFS) external hard drive.

  According to the FAQ of ioSafe less "convert the ioSafe Solo to a NAS", "Linksys WRT610N is the best bet for Windows systems, as it will read and write to an NTFS or FAT32 formatted disk. We recommend this for Windows networks. »

  http://www.ioSafe.com/FAQ-solo

  But for the life of me seems to have lost a whole day trying to get my Vista laptop 'See' the ioSafe on my wired LAN (wireless disabled).

  I followed the instructions of Vista under User Guide Appendix B to a "T".  I tried all the recommendations I can find here and elsewhere and I am at my wits end.

  Someone, someone at - it having the kindness as for hold my hand to make sure I do this correctly.

  The most confusing step in my mind is the 'actions' and how to configure it properly.

  I just want to access the ioSafe HD from a Vista laptop on my wired local LAN (without FTP from the internet) to store the archive personal photos and videos files.  It will not be used with a server media, but simply as a safe place to store the irreplaceable files.

  To access your key USB computer Vista, the first thing you need to do is, select on your vista computer network discovery Service. Click Start - Control Panel - Network and sharing - and Center under this window first activate the Option "network discovery"...

  Now on your vista computer click Start - RUN - and type "\\192.168.1.1" (without the quotes) and press ENTER, and it should invite you to the Usernamd and the password in the Usernamd and the password, use "admin" all in lower cae and click Ok... Now you should be able to see your USB... You must make a right click on it and select "Map network drive" and check the Enable box and below click Finish... It will map the USB on your Vista computer... Once done, you will be able to send and receive data from your computer to the USB...

• Access denied error message trying to update the wireless driver.

  Hello

  I recently bought and installed the software for my wireless USB and when I try to update my device with this software Realtek RTL8188CUS LAN wireless 802.11n USB slim solo he SAIS access denied

  I am using the administrator account on my computer and looking for any kind of help that would be useful.

  Hi Hare Gates,.

  This issue may have caused corruption of driver's record. I suggest you try to uninstall the drivers Wireless LAN then try to download the latest Realtek website drivers and try to install it and check if it works for you.

  Step 1: Uninstall the drivers of network adapter in Device Manager.

  Follow the steps to uninstall the network card drivers:

  a. press Windows + R keys and type devmgmt.msc and press enter.

  b. search for network card.

  c. right-click on the Realtek Wireless LAN and click Uninstall.

  d. restart the computer.

  Step 2: Download the latest drivers for solo slim Realtek RTL8188CUS Wireless LAN 802.11n USB of the site Web of Realtek.

  http://www.Realtek.com/downloads/

  Step 3: Install the latest LAN drivers wireless on your computer.

  Please reply with the status of the issue so that we can better help you.

• It could esserci verificato a problem with pilot he della scheda outdo rete wireless

  It could esserci verificato a problem with pilot he della scheda rete riesco conetermi wireless wireless.non outdo

  Rental select your language from the drop-down at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Buongiorno

  If get di rates the lingua dal menu a discesa by send her tua domanda nella vostra scelta di lingua. Forum it cui hai posted by e by solo inglese. SE non riesci a find wishes of the lingua, he supporto delle options by Esil international further if can find following he link that sotto:

  Grazie

  http://support.Microsoft.com/common/international.aspx

• No puedo conectarme a red wireless of mi casa.

  Don't me puedo connect has red wireless of mi casa, in otras redes wireless is conecta usually, except in of mi casa.
  He hecho todo lo as he could a veces me he achieved connect in the following opportunity vuelve a pasa lo mismo pero, siempre me acarece el error "Windows no pudo conectarce a REDNOMBRE of the.

  Data:

  En lagunas repeatedly solia appear an otra computadora hogar mi Ip con later aviso.

  Creo q no are el driver because in other not redes works perfecto.

  Hello

  This forum is only for the English language - use the forum for your language, please.

  (este foro're solo para el idioma Inglés - usar el foro used knew idioma, thanks.)

  Here is the link to your forum (Aqui esta el enlace para su foro):

  http://answers.Microsoft.com/es-ES/Windows/Forum

  LC

• After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

  Batteries.

• New Magic Mouse (wireless) works erratically

  New Magic Mouse (wireless) said low battery but it does not use a battery? How to charge it?

  The Apple article below should help.

  Recharge the battery in your Apple - Apple Support accessory

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• My wireless mouse works fine everywhere except in Mail. It is simply not to scroll or work at all.

  My wireless mouse works fine in all applications except Mail, where it does not at all. It is altogether we els and absent when I try to use it either as a pointer to a specific e-mail or use it to scroll. It simply is not there. What gives?

  Please could you tell us what operating system you are using.   It isn't iOS with an iMac.

• Bridge of Airport Extreme wireless

  Hi all

  I have an airport extreme and I wanted to install a wireless bridge.

  IM on the 2nd floor and my router is on the 3rd floor

  my wireless signal is weak on the 2nd floor, so I wanted to bridge so that I get full signal wireless 2nd floor also

  I do not want to use cable (from the router to the most extreme airport)

  can someone explain to me how to do this

  Thank you

  Hi irfan_mu,

  Check this help page: AirPort base stations: install and configure a wireless network extended (802.11n) - Apple Support

• Add a preferred wireless network

  I want to configure the wireless preferred networks on a pool of 25 computers at once while no users of the console/GUI/admin is entered, that is to say the computers are provisioned waiting on the registration screen. All computers are properly configured for access "remote management".

  I'm looking for something in Apple Remote Desktop to add some favorite wireless networks with the terminal command "networksetup" to these remote computers

  I got the terminal command:

  sudo networksetup - addpreferredwirelessnetworkatindex en0 ssid 0 wpa2 password

  Any help?

  Hi basil,

  -Something that should work can use the ARD from the Mac Admin officer, to run ssh sessions by officials of the ARD on clients, and then run the Terminal command.

  -J' used a script like this before restart locked ARD Agents on clients via ssh.  No GUI sessions running on the clients.

  The script Unix in ARD would be similar to:

  for N in 'client1.local' 'client2.local' 'clientn.local '.

  do

  {

  SSH '$N' 'sudo networksetup - addpreferredwirelessnetworkatindex en0 ssid 0 wpa2 password.

  }

  fact

  -The script is run using an adminuser which is available on each client with ssh keys setup (no password) and an entry in/etc/sudoers so the sudo command prompts nor a password.

  -L'adminuser can be activated for this task in a separate script:

  Disable: chsh s operation adminuser

  Administer enable: chsh-s/bin/bash

  hope this helps, dwbrecovery

• IPad mini is not connect to Wifi wireless

  Mini Wireless iPad (iOS 9.3.5) does not connect to the wifi at home but for printer and android phone will be. Have you all on iPad and mydlink router resets.

  Action taken:

  WiFi connected in Apple store - Rep suggested that make a backup and then restore iPad at home.

  Results:

  Can not stop to find my iPad / "check failed: there was an error connecting to server Apple ID.

  Several attempts, the problem persists.

  Looking for suggestions.

  Hi RubyBlu,

  I see you're posting here because your iPad mini Apple Support communities is having problems to connect to your home Wi - Fi network. You talked about since someone at the Apple Store that you said to try to restore your device using iTunes, but you can't not to disable find my iPad to be able to do. I know it's important to be able to connect to the Wi - Fi at home, and I'm happy to help with this.

  As a first step, I recommend take a look on this website and perform these steps in the order, if you have not tried them already:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  If you are still looking to restore your device to factory settings, I'd recommend double-checking to make sure that you have a current backup of first. This is a resource for that if you need a refresher on how to create a back up:
  The backup of your iPhone, iPad and iPod touch - Apple Support

  Before you can restore your iPad, you need to follow the instructions here to disable find it my function for your iPad:

  Delete a Mac or iOS device on which you can not disable Find My iPhone

  If you can't disable find my iPhone on the device, turn off the unit so it will Disconnect, then remove of Find My iPhone on iCloud.com.

  Note: You can also delete your iOS device by clearing the first - just follow the instructions below to remove an iOS device, you do not have. You can later restore the device of an iCloud or iTunes backup.

  1. Turn off the device you want to remove.

  2. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  3. Click on all devices, select the device offline, then click on delete account.

     

     If you don't see a delete account, click again on all devices, and then click the Delete button next to the device.

     If the device comes online again, it reappears in find my iPhone. If your device again, turn off find my iPhone on the device (follow the instructions above to remove a device by disabling Find My iPhone), or if it is an iOS device and you no longer, follow the instructions below to remove an iOS device, you no longer have.

  iCloud: remove your device, Find My iPhone

  When you have selected "Delete account", you should be able to restore the device normally using iTunes.

  Take care!

• can I listen to music on the watch with a wireless headset while I swim laps?

  can I listen to music on the watch with a wireless headset while I swim laps?

  Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.