No wireless connection on A100-181

Similar Questions

• A100-201 wireless connection loss

  Hello

  I bought my laptop in December and have been using broadband wireless since but yesterday he lost the wireless connection. My provider has said that it is because I need my card rank up. Is that correct, and how can I do this?

  I'm not very good with the technical side of things.

  Hello

  It's very strange because the wireless connection worked all the time and all of a sudden it doesn t.
  Have you changed something?

  Hmm in my opinion, you should first check if the wireless network adapter is enabled and try to configure your WLan router and WLan connections again.
  All WLan check the encryption, keys, etc.

  Your service provider recommends updating the map?
  I think the guy meant the WLan driver!

  You check you WLan card and if it s a card WLan Intel visit just the Intel site and download the latest version of the WLan driver.

• Cannot connect Equium A100 for WLAN

  Hello world

  I need help! I brought an Equium A100 in February from PC World, and although I have not tried too many wireless connections, it seems impossible to connect to unsecure wireless networks.

  However, it's quite strange. I managed to get another PC to connect to the laptop through an ad hoc network using the wireless link, so I know that the card works. The wireless networks are, but when you choose one that is not secure it says it can not connect and when you click on diagnose, he said: he does not know why!

  I downloaded the latest driver for the wireless, and the machine is less than half a metre of wireless point. I tried 4 networks and starting to pull my hair!

  Someone at - it ideas? Help!

  Hello

  Are you sure that several WLan networks are not secure, and an another security as the MAC address filtering settings were not set to the WLAN router at 100%?

  Is the wireless network card supports the standard wireless even like 802.11 A, B or G?

  I have two different cell phones at home. Both are ready wireless, but it does not connect to my router because of the Wlan standard.
  The router supports B/G and the map only A/B.
  I have studied a long time and finally I discovered that different wifi standards could be the reason for connection problems.

• Bluetooth wireless connection

  MacBookPro OSX El Capitan; Version 10.11. Retina display - MacBookPro connects to the printer HP C6150 help electrician with no problems. not then attempt to use the bluetooth connection.

  To a printer wireless connection works using old MacBook. Bluetooth connects to the mouse and works very well.

  Select the Bluetooth device-

  The computer icon shows - not connected

  Apple mouse - connected

  Hello analyst.1,

  Thank you for using communities of Apple Support.

  I understand that you can print from your MacBook Pro to your HP using Ethernet and wireless printer, but not via Bluetooth. I know how it is important to ensure that you can connect to your printer via Bluetooth. I'll be more than happy to help you with this.

  Use OS X El Capitan: Add or remove a printerand make sure you have the latest version of the software installed and printer connection instructions, specifically, this section:

  Add a Bluetooth printer

  1. Update your software: choose the Apple menu > App Store, click updates, and then install the listed software updates. Even if no updates appear, this ensures that OS X has the latest information on printing software you can download from Apple. If you don't do this, you see a message that software is not available when you connect your printer.

     If you have a printer AirPrint, you have no need to check the software updates.

  2. Prepare your printer: use the instructions that came with your printer to unpack the printer, install the ink or toner and add paper. Turn on the printer and make sure it is not the display of errors.

  3. Connect your printer: follow the instructions that came with your printer to make sure it is ready to connect through Bluetooth. You must also make sure to activate Bluetooth and set up the printer Bluetooth as a new device.

  After connecting your printer, if you see a message prompting you to download new software, be sure to download and install it. OS X will automatically use AirPrint if your printer supports.

  Have a great day!

• How to configure a printer wireless connected to Time Capsule?

  I just bought a printer HP Color LaserJet Enterprise M577z MFP Flow. It has capabilities of wireless printing. So far, I was able to connect wirelessly to one of my MacBook Pro computers, but only by having the printer create an Ad - hoc network that allows up to 5 devices to connect to the printer. But that of not what I want because every computer should manually disconnect the Wi - Fi network, connect to the Ad hoc network, the print job and then reconnect to the Wi - Fi network whenever a print job is required. It is very difficult and frustrating.

  What I would like is striking is the printer act like a network printer by wireless connection to my Time Capsule. I can't connect the printer to the USB port of time Capsule because they are far away from each other, and I don't want to use cables throughout my place. But I have no idea on how to do it because I can't find this option in the menu of the writer or configuration of the United Nations the HP utility software.

  I hope someone here could help me, please. Thank you!

  I have an Epson printer, so some of my experiences may or may not apply.

  I also have a time Capsule, and my printer and Time Capsule are far apart.

  My current configuration looks exactly what you are looking for: a wireless network provided by Time Capsule than all my Apple devices to a wireless connection, and my printer connects to the same wireless network.

  When I first bought the Epson printer, I needed to connect it to the Capsule of time via a USB port.  This sounds as if it were true for you as well.  So, for this very short period. I moved the printer via the USB port next to the printer, the connected Time Capsule, made the setup and then the printer recognized my standard wireless network.  I've returned to steady state, which I use now, with the printer and the far (actually on different floors) Time Capsule.

• 7520 HP loses the wireless connection. What can I do?

  I've seen lots of talk about HP products, loss of wireless connection.  I have the same problem with my 7520.  Initial Setup is perfect, but he began to lose the connection when it went into standby mode.  Someone at - it a solution?

  THERE IS A FAST SOLUTION!
  On April 18, 2014 (page 11 of this thread), I posted a quick solution. My HP7520 printer has worked on Netgear router WIFI 7550 flawless since then. I suggest you read this post.
  From long experience with HP, I found they have great hardware, but their software has always been dismal. The ultimate "fix" would be for HP address their failure of a software that allows to my difficulty in working.
  A single "tweak" in the router security settings wifi will do. The rest of settings changes other people have suggested are short lived (about an hour in most cases), while they don't be reconnected unless they restart everything. It makes sense because of what is happening.
  The single "twist" parameter should logically point HP programmers to where in the firmware, there is the problem. They listen to? And, really, it doesn't matter on all other settings printer and router. All mine are back to the default settings and it all still works very well.
  Go to a BBQ and stop wasting your time on this issue.
  Ken

• wireless connectivity

  installed a wireless antenna external usb (ralink)

  everything worked fine

  disconnected the cable, the feed under the rug, reconnected

  All of a sudden the wireless disappeared

  even from the wireless receiver integrated

  tried a wireless thumb usb adapter small size

  the system recognized the adapter

  appear still no wireless connection

  in the following device manager/network adapters are listed

  Ralink 802.11n wireless LAN card

  map of Microsoft virtual wifi miniport

  realtex pcie fe family controller

  all are identified as working properly

  I need help, remedy the situation

  

  First of all, make your computer make and model and model of your wireless usb adapter.

  Then remove the said cable under the carpet... restart your router/access point and computer.

  Thirdly, check if the internal card now has a signal... plug in external usb and see if she gets a signal... run cable under carpet... Note all changes as you go through the following steps.

  Report back, come back here.

  Frank

• Very limited wireless connection

  I have a HP Pavilion dv7 - 3153ca with a 64-bit windows system 7 and I'm only able to get a wireless connection when the laptop is very close to the modem. Once the laptop is moved, for example, to another floor of the House, the connection is lost and cannot be re established until I have the back next to the modem. He has no problem with the wired connection. This has happened while he was trying to pass my McAfee security provider, although I don't think this is the problem that my other laptop (a Dell) converted without this problem. The other laptop continues to maintain its connection Wireless throughout the House, so the router and the modem is not the issue. I downloaded and re-installed the adapter without modification. I have scanned the laptop and nothing is reported in the mess. Are there any ideas as to why the wireless connection works only when the laptop remains close to the modem? Thank you.

  It seems I may not have been very clear in my previous post.  I wanted to suggest was to reverse the connection of the antenna.  As mentioned in the thread I linked, the connections might have been reversed from what they should be from the factory.  If this is the case, then connect the antennas in a factory setting would not solve the problem.

  Have you tried to reverse the antennas?  If they are in the deformities, then this would fix it.  If they are in the right position, then the worst you would have (only in the deformities) would drop signal strength.

• Portege 4000 - Installed W2K - wireless connection problem

  I installed W2K the Portege 4000. XP was too heavy a resource for this system.

  After you install the network driver wireless Cisco (3.5.13.0) of your Web site, I am unable to get a wireless connection. In XP this comes automatically with an icon. The network device switch that I also installed did not help.

  I have the following:

  Connection to the local network - ethernet

  2 - wireless LAN connection

  Although LAKE 2 is activated this still does not pick up wireless.

  Any ideas?

  Hello

  PUH Windows 2000 is an older system. I didn t forget not all parameters of WLan connection and so I googled a bit.

  and I found an interesting page and a brief description how to configure Wlan connection in W2k.

  Check this box:
  http://www.Yorktech.com/wireless/windows2000/configureW2k.htm

  Welcome them

• Wireless connection on Portege R100

  I have a couple of portege R100. When you connect to my domain, using the wireless connection, the logon scripts fail to run the first time. If you log out, then log in again, the script will run without problem. Y at - it a fix for this problem?

  Hello

  Unfortunately have no proper explanation, but I guess that WLAN cannot be connected so fast that LAN and it may be the reason why the first logon fails. In my opinion it has nothing to do with the functionality of the device and this is just a feature of network.

  Maybe some WLAN expert can give you a good explanation.

  Good luck!

• Memory problem while improving my Satellite A100-181

  Hi all

  I want to upgrade RAM on my Satellite A100-181, 512 MB is a bit limited...
  I ordered a 1 GB dimm noname a month before, put in it, with the 512dimm. As a result, we have only 1 GB recognized, and the laptop does not start if the 512 module is not mounted.

  I thought it was a bad memory module and ordered a kit 2 GB of crucial memory modules, which come paired and guaranteed by Crucial to be compatible with the toshiba A100-181.
  Result is the same: with 2 DIMMS inserted, the PC does not start: just turn on and off and still... With only 1 dimm, it does not start unless the 512 original module is attached to it... And once again, only 1 GB is recognized (915456Ko in the bios, but I guess that video reserved memory is not counted here)

  Is that what anyone has ever heard a problem / solution to this issue?

  Thank you very much.

  It is typical behavior when you use incompatible modules.
  Your laptop can handle with 2 GB max and compatible with 1 GB of Ram is DDR2 400/533 1 GB (PA3411U-1M1G). Use this part number to order compatible module.

  You can also buy the Kingston/Order module. Kingston offers high quality products and using them you won't have these problems.

  The Modules of RAM 'Value' use many chips cheap using several banks/channels, which can cause problems of compatibility with some Chipsets/CPUS.

• PC HP Pavilion 15 15-p001tx: control wifi wireless connectivity issues

  Hello
  Member of the Community/Forum
  
  Model name - laptop Hp Pavilion 15 (15-p001TX)
  Questions - Brodcomm 802.11n wireless adapter not Worming.
  
  Problems-
  I was faced with the same problem for 4 days and I tried all possible means to resolve out, but nothing works.
  
  Problems are the following:-

  1) Wifi stopped working 15 minutes to restart the computer and the wifi icon is automatically limited, and then it automatically become the LAN (small PC icon) and after this phone get hanged every time.
  
  to re work I need for wtich forcefully from the power button.
  
  2) I followed all the tips and tricks to solve the problem and even take a Hp support helps solve this problem of wifi. but nothing works... no one has helped me on this problem.
  
  Here are the ways I've tried.
  
  1. that tick managent of power, I have UN ticked (from PROPERTIES)
  
  2. using the CMD, I reset
  
  3. I DID cofig automatic Wlan disable (and put it on startup)
  
  4. update the drivers to the latest Version.
  
  5 install the latest drivers from the HP website brodcomm or even other Web sites.
  
  No the above to help me out.
  
  3) all wired network work great, but when I swtich to wifi, it will automatically limited and then diirectly hang the entire notebook.
  
  Please please suggest the Suggestion and the ways out sorting valueable.
  
  He's really frustrated now, I do not understand what are the ways to my wifi on working condition.
  
  Thank you
  
  Kind regards

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Aditya Rai

  Aditya Rai

  Hello @adityarai82,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!  I understand that you have tried the troubleshooting steps a lot already, without success.

  Try to review these steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
  
  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Source: fixes Common for wireless connectivity problems.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• WT200 3G - manager says wireless connection is off

  Can someone please. I have a Tablet WT200 and try to use/installation of the component of the 3G...
  But the wireless connection manager continues to tell me that the radio is turned off.

  There is no switch and I've searched the net for a solution but I have seen the same question but not the answer.

  Help me! PLEASE, I BEG YOU!

  Does not WT200 Tablet contain a physical switch to turn on WLan. You must ensure that the communications function wireless (in Win 7 settings) is enabled!

  You can do this in the start menu-> Control Panel-> network and internet-> network and sharing Center
  Here, press Set new connection or a network

  At least, you should go to: start-> all programs-> Toshiba-> network & connectivity-> Wlan indicator settings
  and may display the State of the Wlan connection system

• Loss of wireless connection casual on satellite C660-115

  Hey,.

  I have a Toshiba Satellite c660 (2.5 years now, I think) and I have problems with my wireless connection (for 3 weeks now).
  Never had any problems with my connection before.

  When I use my laptop + - every hour my laptop disconnects Internet and immediately connects again.
  My computer is often used for playing games online and after 3 weeks, it's starting to annoy me, because I need to restart the whole game etc...

  Now, I have already updated all my WLAN drivers, I have the latest version of the BIOS update, and I adapted my energy profile settings to make sure that my computer is not turning off my wireless connection.

  I really think that the problem is on my computer because I have the same problem on 2 different networks.
  Don't know what to do, I hope someone can help me.

  Kind regards
  Jeroen

  Double messages or crossed messages are not allowed. You already posted in this thread: http://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=72824
  Follow * a * thread to avoid misunderstandings.

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!