With Acer 5315 wireless connectivity

Similar Questions

• How to scan with my MG5620 for attachment to an e-mail message to send with my chrombit (wireless connect

  How to scan with my MG5620 for attachment to an e-mail message to send with my chrombit (wireless connect)? I guess I have to be able to drop on my Google Cloud someway.

  Thanks, I'll do the application of inkjet Canon a try.

• Problems with getting a wireless connection for my IPOD touch 32 GB

  Bought an IPOD itouch 32 gb last night.  When I connected the ipod, it is connected to my itunes account and copied my music for me.

  It is also recognized by the name of WI - FI for my wireless account.  Unfortunately, I can't remember or find my password for my wireless connection and so I am unable to connect my wireless to the ipod and establishing the ability to connect to the internet and get my email, etc.

  What is the best course of action for me now.  Should I drop my wireless connection and it restore?  Note: I have a laptop that connects fine, but he asks me a password... it goes directly to the wireless?

  Thank you!

  Go into your router configuration utility and in most cases, you will see the password. If the password is not in clear text, you can change it to something that you will remember. If you do this, you will need to change the settings on the laptop, too.

  To enter the router configuration utility, connect a computer with an ethernet cable. Open a browser such as Firefox or IE and type the IP address of the router in the address bar. For a Linksys router, you must type: 192.168.1.1 [press on enter]. Refer to the manual of your router for more details.

  MS - MVP - Elephant Boy computers - don't panic!

• Need help with Photosmart C4795 Wireless Connection

  What I have: HP Photosmart C4795

  What I use: Macbook OSX 10.9.5, wireless network with WEP security, running, I'm not sure if I have WPS or not (don't know how to say or use it)

  Problem: I used it as a wireless printer without problem for the past five years.  Recently, I moved and cannot find out how to configure the wireless connection.  USB connection works fine.  I still have the installation software, and as far as I can tell, it is updated (I'm not positive however.)  When I run the HP Installation Wizard, I've got to the point where I select "Set up for wireless" and the HP installation wizard crashes every time.  I scoured the forums and have found conflicting advice about this problem.  Someone please give me a clear answer. is there something I can do to get the job of wireless or no wireless capability is no longer works with Mac OS x 10.8 or superior?

  Ah ha! I thought about it.  For anyone who uses an ATT Uverse router, maybe that's your problem.  My router is a NVG589 of Arris.  I don't know about other routers, but I guess that's the same thing.  These routers are capable of WPS, but their default settings have the WPS is off.

  You have to

  1 access to the properties of your router via a web browser (Safari, Internet Exploere, Firefox, Google Chrome, etc.) to the address http://192.168.1.254/mdc
  "2 click on 'Edit your settings or wireless security'", you will need the code printed at the bottom of your router.
  3. turn on the 'Wireless Protected Setup (WPS)'

  From there, you should be able to follow the Setup instructions for printers WPS enabled found here: http://support.hp.com/us-en/document/c02273853

  This next set of instructions is specifically for anyone who has a Mac and running the version OS x 10.9 or higher.  (If you don't know how to check this, click on the apple icon in the upper left corner of your screen.  Select "About this Mac" a box will appear with the information of OS x).

  Select Mac OS X.

  Select the third option OSX v10.10 Yosemite, Mavericks Xv10.9 OS and OS X v10.9 Mountain Lion.

  Select Option 1: Wireless Installation (EVEN IF YOU ALREADY HAVE IT CONNECTED VIA USB.)

  Skip the second step and proceed directly to step three.

  Select the second method: install the software using Apple software updates

  Follow the instructions for the method of the push button.

  I hope this helps for those who had as many problems as me!

• Satellite L35 (US) with Atheros AR5005G wireless connection problems

  I have a Toshiba L35 (Windows Media Center Operating System) with the software WiFi Atheros AR5005G. This machine was purchased in the United States.

  While in the United States the Wi - FI connection to a router (Linksys) using Windows to configure was instant without any problem.

  I am now in England and when I try to connect to a Modem/Router (3 com), use Windows to configure, connection is spasmodic with what makes a connection on every five attempts. Several times I have to use the repair connection device trying to connect. When it connects the connection is good. When you use the repair it shows unable to renew your IP address if it connects. On other occasions, I use the network connection Panel and 'disable' then 'activate' then most guarantees a connection.

  The laptop provides instant connection when you use a card PCMCIA WiFi with Windows to configure. While the card is inserted the s computer WiFi connect instant however when the card is removed and the computer restarted the same problems occur for a computer, free WiFi!

  Other laptops have no problems to connect to my Modem/Router. I am convinced that it is working properly.

  All regional/language settings in the control panel have been updated with the United Kingdom.

  No undates are available for the Atheros Driver or BIOS.

  Anyone can help identify the problem/possible settings to change?

  Hello

  Satellite L35 is a portable American designed for the American market. BIOS and drivers should be downloaded from the Toshiba site we and not on Toshiba Europe site.

  However, the error message Impossible to renew your IP address is known to me and my brother had the same problem with the Intel card. I just updated the WLan driver and used the Intel Proset utility for WLan configuration.

  I see that you have the Atheros card. The Atheros also provide an Atheros WLan client utility. Try to use instead of the clean Windows configuration.
  In addition, place check WLan card properties. You will find energy saving option. Please turn it off and check the Advanced tab

• E3000 loser on multiple devices wireless connectivity

  Problem with router Linksys E3000 (firmware 1.0.02). I have problems with the following wireless connections:

  iPhone 4G (female)

  iPod Touch 2 G

  PC with Wi - Fi (adapter brand Linksys no)

  NetBook Acer (not Linksys adapter brand)

  It comes from the connection is interrupted and dropped, but the devices and the router DHCP clients table indicate that connections are always present. By interruption, I mean that no data traffic is transmitted.

  IPhone 4 G to the my iPod Touch Wi - Fi my son and wife show that they are connected to the network home, with WiFi bars displayed, and the check mark is present next to the home network connection in the device for both settings. When I check the table of DHCP E3000 customers, two Apple devices are listed as with a connection. Yet the two devices to display network errors when you try to use any application that connects to the internet. By raising the wifi on each connection, the connection is restored to the point where traffic passes now. My wife and son believe it's after 10 minutes they encounter interruptions.

  On the PC and NetBook, connections must be terminated and reconnected. I've not timed to see how long before the connection becomes problematic.

  Interestingly, my ASUS laptop and my iPhone 4G do not have the issue, nor did my (Dell) laptop.

  There is no time-out setting in the router config. Thing the closest is the beacon interval, but I don't know which way to adjust (up or down) to help the devices which are undergoing interruptions. I did not a setting of the interval... at this moment, everything is set to the default settings.

  The E3000 replaced an old WRT54 (v2 hardware) router so that I could have a N router in the House.

  Thank you
  -Phil

  How about you change wireless channel? If you do not, then you should try it. Using the two bands, 2.4 Ghz and 5 GHz? If so, make sure they have different but unique SSID. Have you tried to remove the Security Wireless for testing?

• How to install a windows wireless connection?

  I have a Dell with a dell wireless connection. I bought a cisco linksys e1500 modem works with a windows wireless connection. How to install a windows wireless connection?

  Hello

  -What exactly happens when you try to connect to the internet?
  -Do you get any error message or error code?
  To fix your problem, try the following methods one by one.
  
  Method 1: Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  
  Method 2: set up a wireless network
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
  
  Alternatively, you can check the link for more information on this below.
  http://support.Microsoft.com/kb/313242
  
  Method 3: here is a link that gives you more information about the router E1500.
  http://homesupport.Cisco.com/en-us/support/routers/E1500
  
  I hope this information helps you!

• OfficeJet Pro L7780: Printer lost wireless connectivity

  The printer (which worked before wireless) has lost the connection to the router (wi - fi) for wireless printing and can not find the router when you run "Wireless Wizard". Have restarted the printer several times, but no chance connection. Summary diagnosis said the network name 'failed '. (I have with other devices wireless connectivity). The Configuration Page shows wireless status is disconnected and shows all zeros for the IP address and the subnet mask.

  Need suggestions on what to try next. Thank you.

  Turn off the router and back on again was! Printer has now found the router and is wireless printing. Thank you very much!

• Wireless connection keeps gettting disconnected from the Internet.

  System: New Dell PC.  Internet browser: IE.  Connection: Wireless.  Replaced the Modem;  Router: Netgear new 43... Have two other laptops, a Toshiba and an ASSUS. System: All Windows 7.  Other computers are on the same WiFi problems - not stay connected. This PC has two antennas on the back to connect to the wireless router.

  Browser used: Mozella Firefox (the worst of all a fall); Google Chrome (still drops), now: IE, version 9, works best with Yahoo.com email than other browsers and email applications.

  Use: System security Norton, tune up utilities, 2013 and Super Anti-Spyware - ALL have been used continuously without any problems before.

  Problem: as soon as the internet connection disconnects, trouble, launch window is. I select the HOTFIX and then, it reconnects to the internet. He said NO problem with cable. Then, it connects to the internet.  Wireless is full Signal, and the other computer in separate rooms have no pproblem.  I thought that the problem could be the newwork pilot program be corrupt and went to update, BUT got a warning that says to use the APPROPRIATE Microsoft program, or can be a problem. After about 8 hours of searching, I can't FIND driver network form of the Mircorsoft program. the versio curent is 2006.  This computer is a purchase of 2011.   Could be an internet code corrupt, registration, etc., but don't kinow how to solve this problem, if it is the problem?  Maybe different browsers, especially Mozella Firefox changed some settings when the browser has been installed or removed, because it is when the problem started.  MOZELLA Firefox has MANY complaints about this problem.

  I RESTORE the system once, after you get rid of Google Chrome and Firefox, got a new modem, etc, so think the problem MAY be the address or anything that is not recognized by this computer's internet connections? Have no idea.     Help would be appreciated no - no help from Dell (what's new), even thought it was under warrantey, they always try to collect the royalties to talk and then do not know anything on the networks.

  original title: why is my internet connection cut when browsing

  Concerning

  Hi MHBolin,

  Thanks for posting your query in the Microsoft Community.

  Wireless is a breakthrough in broadband technology. It can allow you to access the internet remotely. You have a problem with disconnect the wireless connection. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer the question-

  (1) that you get an error message or error code?

  (2) what other troubleshooting steps have done?

  (3) have you done other changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  Sometimes, the computer cannot locate the IP address of the router. These problems can be solved by a simple reset of the router.

  See the steps-

  (a) locate a PIN size on the back of the router (that would be your reset button).

  (b) use a sharp object or to press the button to reset for a period of ten seconds and release.

  (c) now, wait for the lights on the router to Flash.

  (d) once the lights are stable try to connect to the internet.

  Method 2-

  You must ensure that there is no interference between the router and the computer.

  The municipalities which are-

  (a) a cordless phone

  (b) thick walls

  (c) large bodies of water like the fish tanks

  (d) other wireless devices.

  (e) an immediate proximity to the router (maintain a distance of 6 feet from the router).

  Method 3-

  I would have you look at the article-

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-GB/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  If the problem is specific to browsers besides Internet Explorer, then I would have communicate you with their respective groups.

  Support for Google Chrome

  Support Mozilla

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• Wireless connection drops after 10-20 seconds on Acer Aspire V3-572 - 56T 3 running Windows 8.1

  I have big problems with the network connection Wireless at the office. He sees the network, allows me to enter security credentials, then connects (with connectivity internet confirmed) but gave up after 10-20 seconds. I tried the wireless network to a friend who worked ok without interruption, is certainly nothing wrong with the hardware. I use a brand new Acer Aspire V3 - 572 - T 56, 3 on Windows 8.1, with all the latest drivers/patches loaded and tried to juggle with many advanced settings for the card of network without success. I connected the router to make sure that all the settings, encryption standards, channels etc was corresponding, but the problem is persistent. It has been going on for two days now and is driving me crazy because I really need to work in the office with wifi band. Plug an ethernet cable directly into the router works fine, but it is not the ideal solution (and poses a danger OH & S that he throws on the ground). Can someone help pleeeease!

  FYI, I ran diagnosis several times & the only thing that stands out was the following:

  Diagnostic information (wireless connectivity)
  The Association status: 0 x 00038002 failure
  Association reason code: 0x00000002

  Result of diagnosis: problem found
  Question: RNWF MSM Helper Class
  Root cause: Windows could not connect to "ERICSSON".
  You can try to connect again.

  Result of diagnosis: problem found

  Root cause:
  Failed to bind wireless to "ERICSSON".
  An answer is not from the router or access point.

  Detailed root cause:
  Failed to bind to this network wireless. Windows has not received response from the router or access point wireless.

  Repair option:
  Search for the causes of the low wireless signal quality
  The signal is weak because of the distance or interference.
  Windows Help and Support can provide more information on this problem.

  No need, already has the solution (which worked for me):

  The fix!
  (This is for windows 8.1)

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Right click on the Windows tile in the bottom left of the taskbar.
  -Open Device Manager.
  -Expand "network adapters."
  -Right click on your "Broadcom 802.11n Network Adapter.
  -"Update driver software".
  -"Browse my computer for driver software".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -"Let me pick from a list of drivers for devices on my computer.
  Uncheck "Show compatible hardware".
  -Scroll down on the "Manufacturer" for "Broadcom" Panel and select
  -Scroll down on the "network card:' and find"
  "Broadcom 802.11 Multiband Network adapt."
  -Select, and then click "next".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Say yes to the "put to update driver Warning"
  -Close and you should be able to connect with elegance.

• I try to connect my Acer Vista laptop for HP Officejet 7310 printer using a wireless connection.

  I try to connect my Acer Vista laptop for HP Officejet 7310 printer using a wireless connection.  The printer is connected to a Dell XPS running Windows 7.  Is there a way to do this?

  Hello

  Printers use a built-in wireless card and plug it into a power source, not your network or computer. After turning on the printer, you must refer to the documentation that came with the printer to set up a wireless connection for each computer.

  I suggest you to download and install drivers from the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=391182

  Please use the links below.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

• How can I set up a wireless connection with the Gateway desktop computer?

  I recently buy Gateaway computer (CPU) Office. But it says in the user guide that you can configure the Wi - Fi connection

  but I can, t able to put in place. In fact I, m trying to establish a wireless connection for printer. I want to download wireless

  drivers. You can solve my problem. MY PC model number is:-SX2110G if may be able to solve my problem, I will be happy with you.

  Contact technical support
  http://paapp.Acer.com/findsystem/FindSystem.aspx?title=contact+support&brand=gateway

  You have the right drivers for your machine and your operating system?
  http://support.gateway.com/product/default.aspx?modelId=4522.------

  You have a wireless router for your computer to connect via?

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  What it takes to set up a home network
  http://Windows.Microsoft.com/en-AU/Windows-8/what-you-need-Setup-home-network

  Connect wirelessly to the Internet with Windows 8
  http://www.Dummies.com/how-to/content/connect-wirelessly-to-the-Internet-with-Windows-8.html

• Problem with wireless connection with Satellite U500

  Hello
  Three months ago, I bought a Toshiba laptop Satellite U-500 (Windows Vista). I have a problem with the wireless connection - sometimes, it does not work and I have to restart pressing F8 and repair, then the connection is re-established; If I put into hibernation the connection is intact, but after a stop the problem maybe redo surface after the 2nd or 3rd session.

  I tried to format it, but it worked only for a while. The 2nd item in network adapters in the device (Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC) Manager shows a yellow exclamation point. The message is this:
  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Could you please help. I have sky broadband and am currently connected via the ethernet cable.

  Thank you
  Fauzan

  For 32-bit Vista go here [http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&LNG=1&mode=allMachines&us erOS = & action = search & SelCategorie = 2 & selFamily = 2 & salts Eries = 198 & selProduct = 855 & selShortMod = 1 & selOS = 26 & selType = all & country = 8 & language = 13 & searc h =] and download and then run the wireless LAN driver. That should clear the «!» If it isn't you can also find the vista driver at [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=9&PFid=9&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8192E]

• Satellite P100-434: wireless connection with Vista problem

  Just bought this laptop with Vista and so far could not get the wireless to connect, I have 3 other computers and they will all connect, I have reset the router and set up new accounts on other computers without problem, but unable to do it on the P100.

  I tried the new RADAR feature and will not pick up all the networks, but by trying to establish a new connection it shows that a wireless network is available but it is nameless, although my network is named, I took the passkey of the network so that it is open but still does not connect, LAN via ethernet fine work.

  Wireless switch is on, but when I drag off switching wireless says WE

  Hello

  I can't give you an exactly the answer why you cannot connect to your WLan with Vista because there are so many options that should be checked.
  But I think that you will find the solution yourself with a little help from the Microsoft Web site.

  Please see this site:
  Connect to a network with Windows Vista wireless
  http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

  You will find many useful tips, screenshots and Tips how to connect to WiFi with Vista.

  Please post again if you have found the key