Satellite P100-434: wireless connection with Vista problem

Similar Questions

• Satellite P100-277 - recovery connection and WLAN problem

  Hi, I have a Satellite P100-227 and of the format and reinstall windows. First of all, the Toshiba Recovery disk wouldn't work - it would go through the motions, but windows would freeze on the screen where it is intended to calibrate your screen before entering the windows installation. It is the SECOND disc I bought at Toshiba who broke by the way! I'm worried about my CD before ask you, I used this disc once before to shape about a year ago and it has not been touched for. I tried both discs and no work - the other oldest won't read even since the drivers of compression at the beginning of the recovery.

  So I'm an old XP disc (I run XP btw) and decided to try to install windows this way to check that my laptop was working, which is - I installed XP very well to a good Windows disc and a code is legitimate. However, I have now no drivers for my laptop and the internet does not work - my wireless will not connect at all, let alone register that there is a wireless connection (he used to appear in the lower right, once it was turned on). "When I go to Device Manager and look for network adapters, all there is ' 1394 Net adapter" is said works very well.

  I wonder if there is no drivers for my wireless card, as I have not used the Toshiba restore disk. I tried to put in the 'work' toshiba disk in to see if there are drivers out there that I can access but can't find anything. I can't afford, or be bothered to order a different CD from Toshiba that will break after a format, so my question is; can someone link me to the drivers/software I need for my laptop to connect wirelessley to internet please?

  I hope I gave enough information for a person to be able to answer me - I need my laptop ASAP to work!

  Thank you!

  Hello

  Perhaps this Toshiba HowTo might help you:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  I think that you didn t find a good driver Wlan and that's why you couldn't get the WLan to work.
  Check the Wlan card, then you will get the right driver.

  PS; Here you can find all WLan drivers for Toshiba laptops.
  http://APS2.toshiba-tro.de/WLAN/

• Stream video slowdown and going out of sync on Satellite P100 - 434 Vista

  I have a Satellite P100-434 pre-loaded with Windows Vista and WinDVD. During playback of DVD video, the video stream slows and goes badly synchronized with audio after a short period of normal play.

  The video then jumps and will be back in sync for a short time before going off again. I found references to this on a general search of the web with the only offer the solution of reloading with XP.

  I confirmed that with Windows XP Home edition, the problem does not occur, and with Vista it always happens with PowerDVD v7 good than not as pronounced. I would like suggestions as to the cause and possible solutions.

  Well, what to say seems the Vista itself or the drivers are responsible for this problem!
  As you already suggested the use of the Win XP operating system would be simpler!

  Anyway, the laptop uses the nVIDIA GeForce Go7600 FX card. Then first try to update the graphics driver and check a few improvements!
  Try to use the drivers from the site omegadrivers.net

  In addition I recommend you disable the acoustic silencer maybe it would help

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Satellite P100 - 434 BSOD boot problem

  Hello everyone!

  I have laptop Toshiba Satellite P100-434 and lately I encountered many problems during startup.

  1. the laptop starts normally until the entry of the password. Then, in the middle of typing BSOD.
  2. the laptop gets BSOD or turns off 2 seconds after the Microsoft bar appeared.
  3. the laptop won't turn on - after launch is only a flash of three blue LEDs on the right and the screen remains blank. No home Toshiba screen.

  After a few attempts I managed to get the Toshiba welcome screen (this is after the second flash), but there are other issues later, the laptop shuts down or trying to launch startup repair. He speaks only of unspecified error and restores the previous state.
  4. I tried to enter safe mode, but several times I met the same: the laptop turns off after loading some drivers.

  BSOD are too short for me to identify what is ongoing - I noticed something just BAD POOL and IRQL NOT EQUAL to something as if it was something with the drivers, no doubt the NVIDIA driver display. I uninstalled and downloaded a new and installed (version 7.15.11.5666). EMH is NVIDIA GeForce Go 7600. Once, there was some information about dxgkrnl.sys?

  I did the Test of memory Windows at startup - no error.

  I scanned for any viruses: my AVG removed some Cryptor virus, but the problem is still there.

  The operating system is Windows Vista Home Premium SP 2.

  I don't know what the problem is. This is the driver of display or any other driver? Or maybe some powers of the problems? All advice welcome!

  > Anyway: I would like to know if the problem is hardware, or rather the related software, because I take my laptop to repair if there is something I could do download/resettlement.

  This question can be easily answered: you must install the Windows operating system.
  If the windows installation would be finished correctly and if you will not see another BSOD after installing, it emits so was related to the (software) system. But if the system is not possible or if BSOD would appear during the installation and after installation, then I suppose that something is wrong with the material of s for laptop.

• Problem with wireless connection with HP 3070 B611

  I have a router with the IP address 192.168.0.1 and printer HP 3070 B611, whose 192.168.223.1 IP address, so the wireless connection with the printer fails.

  How to change IP address of the printer in the 192.168.0.XXX range?

  It seems that you are on a network other than your router. Reset your network settings on your DEFAULT PRINTER. Connect the printer to the router again, make sure it is the same network name.

  You can also unplug your router for 15 seconds and plug back in and then try to re - connect the printer to the router again.

• Play Call of Duty 4 on Satellite P100-434

  Hi all

  I recently bought my Toshiba Satellite P100-434 (Intel 1.66 Dual / 2 GB RAM / Go7600) and we just tried on the game system.
  I installed COD4 and tried to play, but it seems that the laptop has trouble running.

  I've updated my display drivers for 32-bit vista nvidia those downloaded from this site seems to have done very little, or even no difference.

  I only run the game with each setting to minimal with resolution of 640 x 480 and it is still fighting.
  Everything on the laptop must be sufficient to operate this game except for the cpu that is recommended a dual 1.8 and it's a double of 1.66. just that would be why the game does not work as well?

  I would not have thought so.
  I have had friends who have run this game on pc spec worse.

  Any suggestions what might be my problem or what else I could do to improve performance?

  Thank you very much...

  Hello

  If have a Satellite phone with an AMD processor performance and the most recent card ATI Radeon graphics.
  I m running Windows XP due to the better performance of game. Vista needs of more material resources, and that's why I prefer the XP.

  Anyway, last week I ve installed the COD4 and believe me this game needs more resources than you think.
  However, you should be able to run the COD4 using resolution 1024 x 768. But it s another question if COD4 will run smoothly.

  However, I found a Toshiba FAQ doc about a few videos "stutter" during the game using Windows Vista:
  Check this box:

  [New video driver and BIOS eliminates video "stutter" during the game (Windows Vista): http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1924 764xml & sliceId = & dialogid = 46208288 & stateId = 0% 200% 20 46206416]

  With regard to this doc the driver display & BIOS update should improve performance.

  Good bye

• Satellite P100-434 won't boot to the top

  Hi Ive got a Satellite P100-434 and Ive had for more than a year.

  Unfortunately today I couldn't get started.

  The power led lights up, the HARD drive makes light very briefly.
  The display lights. If she does not even there to boot in the bios.

  Any idea what the problem might be? Im hoping that the CPU or the motherboard is not fried.

  see you soon

  John

  Unless you bought the extended warranty, I don't think you have a lot of luck. My suggestion is to return to the place of purchase, if you still have warranty.

  However, try to remove the battery for 1 minute and then replace the battery again. Try it turn on.

  Also try with the power cable plugged in power and remove the battery.

  If all else fails, then you have a very expensive paper weight.

  Good luck.

• Video and performance of the Satellite P100-434 game

  I bought a beautiful new P100-434 just 3 weeks, at the start of tring to play a game or a DVD It OK but after a few moments, the pace falls right then back up then back down...

  I returned to the store and they gave me a new, but the same thing happens.
  Everyone had noticed the same thing. If yes tell me how to deal with it.

  Hello

  One question: are you using the Vista operating system.

  If Yes, then I guess it is the same question what happens on the Satego P100.
  It is a Vista problem. Many people have installed XP on P100 and since the new installation, all games work like a dream

• How to turn on WLAN on Satellite A200 - 1 M 8 with Vista operating system

  How to enable the WLAN on Satellite A200 - 1 M 8 with Vista OS, FN + 8 does not work

  Make sure you wireless switch on the side of the unit is on. Click Start-online panel-online network and sharing Center => manage networks wireless (on the left) click the little more beside the word 'Add' => select 'connect to a network that is in range of this computer' => you will see a list of networks that are in range so, select the one you want and enter the encryption key if it is a secure network

• Satellite Pro L40 - 15 c with Vista: WLan LED does not illuminate

  Hello

  I'm new on this.
  I have Satellite Pro L40 15 c with Vista operating system.
  Although I can access the internet via my WiFi connection, the orange LED on the front of the machine does not shine.

  He failed yesterday. All agross A a come before and all the solutions?

  Kind regards.
  Maurice.

  Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=107665

  It seems she s question a Vista Atheros. Make a WLan driver and the update of Vista!

• Upgrade CPU on Satellite P100-434

  Satellite P100-434 BIOS v 4.80 does support the Core2Duo T7500 Intel proccessor?

  I'm currently have T5500 and want to update to T7500, is the same thing but I don't know the motherboard/BIOS card can support this CPU?

  I advance thank you

  For CPU upgrade, there are several different important things and not the BIOS only.

  Check it please this Toshiba document initially - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  BTW: I m not sure but I think you can find similar topics related to upgrade CPU on P100. Use the advanced search in this forum. Maybe you'll find some interesting discussions.

• Satellite P100-434 - how does the safety lock?

  Satellite P100-434. There's a safety lock on the back of the laptop, how does it work?

  Thank you for the answers.

  That s quite simply. This security lock allows you to paste an especial laptop lock designed for the table.

  Check out these useful examples:
  http://us.Kensington.com/HTML/2219.html

• Problem with wireless connection with Satellite U500

  Hello
  Three months ago, I bought a Toshiba laptop Satellite U-500 (Windows Vista). I have a problem with the wireless connection - sometimes, it does not work and I have to restart pressing F8 and repair, then the connection is re-established; If I put into hibernation the connection is intact, but after a stop the problem maybe redo surface after the 2nd or 3rd session.

  I tried to format it, but it worked only for a while. The 2nd item in network adapters in the device (Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC) Manager shows a yellow exclamation point. The message is this:
  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Could you please help. I have sky broadband and am currently connected via the ethernet cable.

  Thank you
  Fauzan

  For 32-bit Vista go here [http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&LNG=1&mode=allMachines&us erOS = & action = search & SelCategorie = 2 & selFamily = 2 & salts Eries = 198 & selProduct = 855 & selShortMod = 1 & selOS = 26 & selType = all & country = 8 & language = 13 & searc h =] and download and then run the wireless LAN driver. That should clear the «!» If it isn't you can also find the vista driver at [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=9&PFid=9&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8192E]

• Vista cannot find the mouse USB - Satellite P100 - 434 PSPADE driver

  * Need help to install a mouse optical usb on vista32 *.

  I have two mice, two optical usb, 1 wired and 1 wireless. They are the two plug-and-play so when to plug their vista must locate and install the right drivers automatically... it can't.
  Vista search drivers on the disk and hard on the internet.

  "" looking software... looking for an online software.. "."

  Then says:
  "Windows encountered a problem installing the software driver for your device."
  Windows found driver software for your device but encountered an error trying to install it.
  USB Human Interface Device
  The system cannot find the specified file. »

  They are plug-and-play and just install automatically, there is no driver CD that come with the mouse.

  I have a Toshiba Satellite PSPADE P100-434 with Vista 32 bit purchsed new 2 weeks ago.

  Help, please... Thank you!

  It's strange, because the standard optical mouse should be installed without time and without the need of specific drivers.
  Did you check the homepage of the manufacturer for drivers?

  And have you installed all the latest updates for microsoft windows and SP1?