With diskpart, I can't see my drive

Similar Questions

• I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  I use LRM6 with Win7.  Cannot display all of the subfolders on external drive with photos.  Can't see most recent used folders.  How can I get all the records to display in the tree when the library module?

  Syrup72 wrote:

  Why I see pictures when I click on the tab all the photos above, which do not show in the tree on the G: drive?

  DSC_2429 is in the shown locaton and present in all the Photos, but there is no folder "Tulsa"... "in the tree.

  The left pane is a "choose one". "All photos" are just that. 'G' is a different option.

  Lightroom is not a file Explorer. He knows only the drives and files that you have imported the photos of. If LR shows not all of the photos that are on your hard drive, it is because you did not import all photos.

  If LR shows you a photo in "all photos" but do not show it in the folder you think he is in, go to "all photos", select the image, right click "view in the library folder. This will show you where LR think the picture is.

• Can not see the drive letter for Hammer 640 GB external hard drive

  I have an external hammer 640 GB drive (which has a Western Digital WD6400AAKS drive inside) with important data. When I connect to my computer (under Windows XP Pro), I can see the player if I go to my computer-> hardware-> readers but can see any drive letter.

  Even if boot disks using software such as Hirens boot and demarrer start with the BACK, do not see this drive (I tried A - Z).

  There is apparently no physical damage to the disk.

  Hello
  In this case, it seems to me that the drive itself is damaged. For this purpose, it is likely that there is no conventional solution through Windows itself.

  I suggest you seek a professional store of COMPUTING, or computer confidence. If information on this drive is still recoverable, it will probably take advice from specialized professionals and know how to do really.

• How can I see external drives on the sierra?

  How can I see external drives in sierra?

  Menu Finder Preferences... > General

• Can't see added drive internal or external?

  I have a XPS-8500, Windows 7 / 64 bit with a 2 to internal 30 GB SSD.  I had some signs of the internal hard drive of the problems.  I tried to add additional disks, (internal Seagate 500 GB, external WD My Book 3 TB) back up to the top can not get the computer to either one of them.  See them Device Manager but can not get a drive letter assigned.  The Device Manager also reports 'Unknown device' in 'other devices '.   With this combo, (internal and ssd), does that mean that I can not add all the other disks.  Told me on another forum that the readers are seen on the port 0 & 1?  I tried tools such as DISKPART and Disk Manager to format and use the new Volume Wizard, but they always expire with an error:

  "The operation failed to complete because the disk management console view is not updated.

  Any help would be appreciated.

  My Bios indicates RAID

  Primary drive Sata0/Port0 (c)

  Samsung DVD Sata1/Port5 224

  My new drive, seagate 500 GB SATA2/Port2

  Samsung DVD Sata3/Port3 203 b

  MSata1/Port1 Samsung SSD 32 GB

  Thanks for all the suggestions, I learned many things from various forums but ultimately I just bite the bullet and did a system recovery using the disks that I made the purchase of the machine a few years back.  I felt that I couldn't I had some OS system files that have been corrupted (says the release of scannow).  The main hard drive was foul and worsens with each use.  I don't have a disc repair system... and the list goes on and.

  After the restoration, I reloaded all my software, downloaded hundreds MS Updates.  Had to re - configure the bios and put the raid ssd and implementing caching with the new accelerated disk.   The new drive is only 500 GB against the oem 2 TB, but I'll pick up something soon.  The 3 TB WD detects.  I partitioned it into 2, 1.5 to partitions.

  Everything works very well.  I created a system repair disc.  I have scheduled backups and will create a system image.  Hard drives don't last forever, but this time I have will be prepared (lesson).

  Joemt.

• Can't see C:\ drive after starting via SD card on an M200

  Hello.

  I get a unmountable_boot_volume blue screen during windows loading so I'll try to repair or reinstall if necessary things. I was able to boot from the SD card and 9 (Targus CD-ROM) option seems to work on my CD-ROM drive external Iomega. The question I would ask is that once I'm in the BACK, I shouldn't be able to see the directories of windows on my hard drive? If I go to C:\ I don't see the content of the SD card. I can access the CD-ROM via the Q:\ drive and load the recovery CD - but the recovery CD-say it will erase everything. I would like to copy some files in Windows document to my SD card files before you reinstall - but I do not see the drive on which Windows is installed.

  Is this normal or am I missing something?

  Hello

  The error message unmountable_boot_volume its like a bad HDD or destroyed at the disk boot sector.
  Sorry, but generally in such cases, the use of the Recovery CD is the best solution.

  Have you checked if the BIOS recognizes the HARD drive correctly?

  In my opinion you should check this first because you will not be able to copy all the files on the HARD drive if the BIOS does not recognize the HARD drive.
  But perhaps the hard drive is damage if the HARD disk does not appear in the BIOS.
  In this case a replacement is necessary.

• Satellite U840-10N - Windows Installation can not see any drive

  Hi all, this is my first post so I hope that I chose the right place to post in.

  I just bought a new Toshiba Satellite u840-10n ultrabook. He joined WIndows 7 Home Premium 320 GB HHD + SSD of 32 GB.

  Even though I prefer Linux, I need Windows because of Microsoft Visual Studio. I downloaded Visual Studio (legally throught dreamspark.com), but it looks like it has some issues. In particular, I can't create any project.

  After searching the Web for this problem, I decided to try reinstalling Windows, hoping that this will solve the problem, and here's the point.

  Installation process of Windows 7 can not find any drive. I looked through the web a lot to solve this problem, even, without understanding.

  I read a lot of other people had the same problem. I tried different ways and I'm about to throw the laptop out the window.

  Is there anyone can help me?

  See you soon,.

  Marco Galassi

  You need to load the SATA driver before you start the installation of the OS. Try it please use the files from http://www.fileswap.com/dl/igfH0jVrap/

  I used it on my Win8 preinstalled satellite to install Win7 64 bit. Copy it to USB and install from there.
  Please post comments.

• T42 can't see hard drive

  Happy new year everyone, hope it was a good Christmas break.

  In the hope of an expert; I have a Lenovo/IBM Thinkpad T42. The hard drive died so I replaced it. I bought a new hard drive and Windows 7. I can boot from the DVD and try to install but when I get to the section where I can choose where to install the OS I don't see the drive listed. I know the drive is good, as I tested it in another laptop and can see the drive in a caddy. I also see the drive in the BIOS, but I simply do not see as an option when you try to install the OS. The only option I have is to load a 3rd party driver to see if it works, but I've never had to do this before.

  Any ideas to stop going me crazy and crying in the keyboard.

  Thanks in advance

  Martin

  T42 does not have the above option in the BIOS as it was designed when the PATA disks were standard.

• Satellite Pro U200 with Vista: ConfigFree can't see implementation of the SUMMIT

  I can't see the implementation of the SUMMIT to configfree.

  Please let me know

  Sorry Ronen, but I really don't understand what you mean exactly below the SUMMIT. ConfigFree is well known to me, but now I'm really confused.
  In my case, it works fine. I can watch and see all networks; LAN and WLan...

• can not see the drives in my computer

  I use windows xp sp3, I'm created 10 leave that off that c is the primary drive. out of 10 partations its showing only 6 were leaving when I'm trying to restore the pc is showing the following massage "drives D: G: H: I: changes after this point caanot reversed because the drivewas excluded from System Restore monitoring, or has been disable or removed.", when I see his watch free space in disk management How can I restore my missing records or how can I activate the readers. I have the disk hard id 3. Help, please

  first of all, if you try to use system restore to solve the problem of partitioning, it won't work.

  Second, there are some programs that don't do a good job with partitioning of disk partitioning.

  Basically, it seems that the drive that you created have not listed by windows.

  what you might try is to revive your partition program and see if 'he' sees these missing discs.

  then try to have windows search for new material, via Add Hardware Control Panel.

  either way, what partition software have you used and you run the program from a cd or from inside windows?

• HP Z820 - SSDDashBoard can not see the drive

  I just purchased & installed a reader of 960 GB attached to the SATA III connections on the card mother HP Z820.  Disk Manager 10 windows sees the drive, I am able to use it wisely, but the dashboard software will not recognize the drive.

  The clues, please?

  Unfortunately Yes. You can try to update the SATA drive and see if you can get it to show a normal SATA, but it it's SCSI go it won't be able to see.

• Pavilion 15 with Realtek rtl8188ee can't see 802.11n network

  Hello

  a new Pavilion 15 with the network card wireless Realtek rtl8188ee - all drivers up to date.

  I have a Netgear router which is dual band and there is a network of 11g and 11n.

  I can connect and use the network of 11g all very well.

  But I don't even see the 11n network.

  Any thoughts?

  Hello:

  If you mean that you cannot connect to the 5.0 GHz band, it's because the wireless RTL8188EE is a unique card band (2.4 GHz) only.

• ask for help with the 3210, can not see the hp software, can't sweep

  Can someone help me with this, I have a 2.66 ghz processor mac intel core 2 duo, the osx running version 10.6.7 and scanner no longer works after update to latest software to 10.6.7.  I tried to download the software of hp hp upgrade, and then when it works not tried to download apple software update for hp.  Nothing works.  I can't activate a scan of the computer, the software icons have disappeared.  And I can't activate the printer, just shows 'no scan options '.  The computer allows printing, I can find a printer icon with the option of mac system preferences.  very frustrating hours pass, no solution, thank you very much, david.

  I was able to solve the problem by talking to a person capable of mac online, a person named kelly in oregon, basically, we did a software update (she waited w / me through 15 minutes of downloading), and mac program "image capture" is now effective for me for scanning documents.  I think I can have earlier been confused by the fact that the screenshot is a new program, I had been looking for hp scanning software and finder contains more than all the entries of "hp".  Image capture seems to work.  (FYI, we had briefly discussed to insert the original disc, but chose to not not to this since it does not say that it's usable in mac os 10.6 and since we had the opportunity to see if the system works after installing the downloaded software updates).

• Lightroom can not 'see' Network drive

  OK, for the last two years of using lightroom, I had my RAW files stored on a xserve RAID which is networked with my editing station.   Nothing about this configuration has changed and has worked very well until Monday (it was for sure a Monday)

  Monday, after I installed the plugin x-rite color checker passport, I decided to restart my machine because it became slow have only worked on several large files in Photoshop.  Lightroom wanted to make his weekly backup of the catalog, so I left it.   Fast forward to a few hours later, lightroom has been locked up for sure.  So I had to force quit, and then restart.

  When restarting lightroom gave me?  on most of the files on my network drive, a single folder showed normal.  I checked the disk and permissions all's well here.   I tried one of my many backups of catalogue with the same results.     I didn't have time to monkey, so I erased prefs and App folder lightroom support and proceeded to re - install lightroom.    After that I got the same result.  At this point I also noticed in the screen import that he saw only a single folder on the disk...    At that time, I did a catalog completely new, based on this years only images (24 k or so compared to 43 k in my other catalog) and left that go from one day to the next.  all imported correctly and the preview images created, however this new catalogue has the same problem!

  Help, please!

  Note, I just tried lightroom on another machine and he sees the thin files.

  Have you tried to navigate to the network folder using the interface of the Explorer/finder on that you get when you click "Select source" and choose "Other Source" from there? If you can find the file in question, try to import an image from there.

  Gossweiler beat

  Switzerland

• Re: Equium A200-1VO - Windows XP can't see hard drive

  I just replaced the hard drive on my toshiba satellite A200-1VO and trying to load XP but I get a message saying there is no hard drive.
  Can someone help me?

  Hello

  Have you used the SATA HDD?
  A200 series supports the SATA controller and you need SATA HDD (not the IDE).

  In addition the SATA HDD needs SATA drivers. Win XP does not provide such driver, and therefore you must include this.

  Search here in the forum A200 SATA drivers to get more details and info.

  Good luck