With instant vmware SRM / 3rd party backup

Similar Questions

• Problem with WLC and a 3rd-party NMS SNMP AP Assoc/cancellation interruption

  Hello

  I'm troubleshooting an issue, why our NMS is not able to automatically clear an alarm generated trap of an AP that has been separated and is associated with again.

  When debugging on the WLC snmp trap generation, I discovered that when the AP disassociates the WLC sends the trap of bsnAPDisassociated , which is perfectly defined and I can also find in the SNMP Object Navigator. However when the AP reassociates again the WLC sends the ciscoLwappApAssociatedtrap.

  Part 3 NMS is not able to understand it, but our WCS system does, that's why I then took a peek in the MIB file installed.

  I discovered that ciscoLwappApAssociated is a sheet of ciscoLwappApMIBNotifs (1.3.6.1.4.1.9.9.513.0. 4), which I have neither

  Cannot be found in the Cisco SNMP Object Navigator or the downloadable MIB.

  As the MIB in the WCS is a XML file I didn't how to get information in the 3rd-party NMS.

  Anyone have any idea on how to solve this problem or there at - it update CISCO-LWAPP-AP-MIB available somewhere?

  Our WLCs are running the latest version of the software (7.0.116.0) as well as our WCS (7.0.172.0)

  Thanks in advance!

  Kind regards

  Patrick

  Such discrepancies sometimes occur. Best is a matter of TAC in order to tackle the problem through a bug or have a new MIB published on cisco.com if necessary

• Features of the Satellite A200 they stay if I install 3rd party software?

  I have a question:
  I have a laptop Satellite A200 and my software is lost and I want to install a different but not the same (for example buy one by my).
  The features of Toshiba will remain?

  Hello

  I can't say with certainty that your 3rd party software will not affect the preinstalled Toshiba tools and utilities.
  I mean, everything is possible and I had many problems with various 3rd party applications, but generally, there should be no problem.

  Welcome them

• SRM + SQL + 3rd party replication and suspend the DB

  Gentlemen

  What can the SRM to ensure customers a SQL VM running on (and replicated by) 3^rd party storage is applied consistently? The HP SRA has code that can invoke the suspension in the virtual machine? Or is there some kind of way scripted as part of SRM, that a quiesce DB in the virtual machine can be triggered in tandem with or just as a LUN replication occurs?

  I know that HP is responsible for the ASR - but in these situations, we sometimes get caught between vendors. Looking for experience "How have any other mission critical SQL resources protected using 3PAR and SRM".

  In other words:

  We are looking for assistance with a DR implementation for a specific application of SQL. The app is on virtual machines running on 3PAR storage. We bought all the necessary "3PAR suite application licenses" and then also have VMware SRM.

  We are more concerned than LUNS replicated DR on-site production (LUN will be virtual computers hosting SQL data storage I assume) will be fully SQL-compliant (i.e. better than crash-consistent), during replication.

  We have some experience with 3PAR replications - but to my knowledge have not yet worked with the application suites.

  Question - anyone can describe what role (if any) suites of applications 3PAR can have in correctly the suspension SQL running on a virtual machine that is on a LUN 3PAR? I don't know we can do this medium - seems that we will have to use RDM (or vVOls if they are compatible SRM) be properly suspended the DB. Is there a HP storage agent that can run on a VM SQL in order to coordinate with the table when the underlying LUN snapshots are performed?

  You are right. Consistency in the application will have to be managed at the level of the array. Some providers of table (I know NetApp specifically) offer the ability to place an agent on the VMS and this agent to use the table to ensure uniformity in the application, I'm not sure of HP.

  Another option that you might look at is vSphere replication. VR offers quiecing VSS (with JEREMIAH) in native mode.

  If you are looking for a specific response to the use of replication 3PAR application suites I suggest you post to a forum of HP. vVOLs are not yet compatible with SRM and I do not see how RDM you will get what you are looking for.

  Finally, how you deal with your post, I would say that you do not assume that only men participate in this forum.

• BlackBerry smartphones backup 3rd Party applications

  Hello

  I tried to search this... maybe I did not put in the string to the right of the words... How should we do about backup 3rd party applications. I got the error 523 or what it is... where I basically have to reinstall everything on my phone. I can usually pull the backup of the emails/contacts/my computer but I do not know how to save my 3rd party apps specifically.

  In addition, because I ask anyway... anyway is to wipe my phone completely using Desktop Manager? I heard people say that they use JL order or whatever... I am familiar with this program and I was wondering if there was a way through before DM I look for another program.

  I appreciate the help in advance.

  Here is a great link that provides instructions step by step on how to backup 3rd party applications (to note that you will still need to enter your licenses after for those who require licenses): http://forums.crackberry.com/f3/how-back-up-3rd-party-applications-53201/

  If you just want to reinstall the OS you have on your phone, JL_CMDER is the simplest method (otherwise you must first downgrade, then you spend again).  To make it as easy as possible, all you need to do is to download the non-installateur version of JL_CMDER (it's a zip file, you can easily extract in Windows).  Run JL_CMDER and select option 4 to wipe the phone.  Follow the remaining steps and will be wiped for your operating system (your phone will be error 507 on it once it is completed successfully).

  Then you can reinstall the operating system using the manager desktop or via the Loader.exe file in C:\Program Files Research In Motion\AppLoader.

  It is the best way to simply reload the same OS.  But if you do not want to, and if you are able to find a downgrade to (e.g. 4.7.0.65) file, you can do the downgrade first and follow her again by the upgrade.

  I hope that made sense but let me know if you need help with this.  I'll be on the forums for about over the next 45 minutes or more.

• Can I migrate my 3rd party applications on my mac pro with a new IMac with El Capitan Lion?

  I have many obsolete applications (Final Cut Pro 7 etc.) and applications 3rd party (Ms Office, final version of the project, etc.).  Can I move ALL of my external hard drive, which is a carbon copy of transfer cleaner everything on my mac pro?

  Yes, but they may be too old to work with El Capitan.  Look at RoaringApps.com to see if there is any inconsistency with these applications.

  

• shortcut screen locking with 3rd party keyboard

  I have a HP external keyboard attached to my mac and I was wondering how to lock the screen as you would with Windows (windows + L) or Linux (Crtl + Alt + L) so I can get up and leave my computer. Is it possible to do it without 3rd party software?

  Preferences system--> Security Privacy &--> need password _ minutes after the start of the screensaver or of sleep

  Once you set that you can put the computer to sleep, thus initiating the lock screen when you "wake up" by pressing Command + Option + Eject.  If you click on the padlock in the lower left pane, you can check the second box and set a message for your lock screen.  It is an option.

• Calibration Toolkit with 3rd party ECU measurement and CAN interface

  I would use the NI ECU Measurement and Calibration Toolkit with an NI CAN interface.  The interface devices supporting J2534 are very common.  The NI ECU Meas and Cal Toolkit allow this? If so, how does one time on another interface CAN interface to the Toolbox?

  The NI ECU Measurement and Calibration Toolkit National Instruments Hardware only supports.

  If you want to discuss the possibility of using any 3rd party hardware, please contact your representative local.

• OK for use with a 3rd party charger?

  Wanted to buy the Motorola chargerof origin, but it is out of stock.

  I found this Blackberry folding blade charger for Playbook

  Can I use this charger for motorcycle G 2nd Gen? People say it's a quick charger, I don't know if this will eventually be a problem.

  Plug

  Input voltage: 110-240V AC

  Output voltage: 5V DC

  Maximum output current: 1.80 has

  @Link1320

  We tested the phone with our range of chargers. It can work, but I can't recommend using with another 3rd party charger.

  Mark

  Forums Manager

• I want to develop an application with the Ribbon UI by using a 3rd party control

  I want to develop an application with the user interface of the Ribbon using a 3rd party control, that I have to get a license from Microsoft? How?

  original title: license of the Ribbon user interface

  I want to develop an application with the user interface of the Ribbon using a 3rd party control, that I have to get a license from Microsoft? How?

  The only a link I found on this page does not (http://msdn.microsoft.com/en-US/office/aa973809).

• Overlapping address space question - how to NAT inside the traffic to one address different range on SAA for comms with 3rd party VPN?

  We already have a connectivity of IPSEC VPN site to site with a 3rd party.

  They must be able to access a couple of servers on our internal network but the problem, it's the subnet these servers are hosted on clashes with the address space they already used elsewhere. Thus, they asked if we can put in place a new subnet and have our firewall (running v7.2) ASA NAT the traffic to and from our servers ' real' internal addresses.

  for example

  • 3rd party 10.10.10.0/24 subnet
  • Our subnet 10.20.20.0/24 (but this clashes with the 3rd part of the address elsewhwere space)
  • Our 'real' internal server addresses are 10.20.20.1 and 10.20.20.2

  How do we setup NAT on our ASA translating internal addresses 'real' of these servers for some other addresses that don't clash?

  that is that the 3rd party is concerned, they would simply have to communicate with this 'new' subnet, say, 192.168.20.0/24 and our ASA firewall NAT traffic accordingly to allow some comms unfold?

  (And it should affect only comms on these servers for the 3rd party - NOT for one of our other multiple VPN connections! "And should not affect the other comms from the servers themselves!).

  That's what I've tried so far, for one of the servers, without success:

  On ASA:

  !

  access-list 1 permit line 3rdpartysite extended ip host 192.168.20.1 10.10.10.0 255.255.255.0
  !
  access-list SERVER-NAT line 1 permit extended ip host 10.20.20.1 10.10.10.0 255.255.255.0
  !
  static (inside, outside) 192.168.20.1 public - access NAT SERVER list

  "sh xlate" indicates:

  192.168.20.1 global local 10.20.20.1

  Can someone help with the necessary NAT configurations on the ASA?

  Thank you!

  'Clear xlate' after you have configured NAT statements?

  When you try to ping from the 10.20.20.1, get it to the ASA? You have an ACL on this interface that would block the ping? Also, can you run capture packets on the ASA to see if the ASA receives even the traffic?

  What is the subnet mask of the 10.20.20.1 host? I guess it's 255.255.255.0?

  You don't need something specific on the ASA with regard to the delivery of the 192.168.20.1.

• Integration with 3rd Party App

  We currently use a 3rd party called media 1 channel to carry out the investigation or to submit and Enter to Win forms.  Now, that exist outside of the Eloqua platform.  Is there a way to integrate this information?  Have send their form, survey, etc. flow directly in Eloqua.  I talk about them using a form Eloqua and here are their concerns:

  "Eloqua had an open API, we could use to send data in the database? This would probably include a function we call that sends to your server of an object that contains the data that is appropriate; probably json or other type that when received them by your server would be analyzed and added to the critical database.

  If I'm wrong and that you do not have this form of API; in the txt file you provided the submission form called a file, we could potentially call it directly within our applications and Web sites and pass it the correct information, but we need to coordinate the information exactly. In addition we are a validation uncompressed js file so we can ensure that the validation is rewritten correctly to our projects. »

  Hi Megan,

  Eloqua has many options with regard to sending data to the Eloqua system. You can get all data from any system for contacts and send it to Eloqua. Look at the platform of the building on The Eloqua - A Resource Guide to get started. Indeed, if nothing else, you can transfer the form submiited from your site or application data directly in Eloqua and perform various other process forms: overview of processing &.

  I hope this helps.

  Thank you

  Amit

• How Oracle Clusterware Oracle RAC and 3rd-party Clustering with them

  I have some questions on how Oracle, Oracle RAC and 3^rd party clustering CLusterware fit between them.

  Q1. My understanding is that the Infrastructure Grid Oracle Clusterware is Oracle's Clustering solution that allows applications to cluster? that is, it is a general clusterware solution to compete with those already on the market. Is this correct?

  Q2. So why CARS is necessary for the Oracle cluster databases? An Oracle database is not just considered one application like any other? So why can not just use you GI / Clusterware to gather what you would do for any other application? Why so you need RAC to the Clusterware Summit?

  Q3. Is it is possible to combine an Oracle database using 3^rd party of clustering and not use Oracle Clusterware and CARS at all that is can you say cluster, an Oracle database using say Sun Clusters, Clustering AIX or Linux native same clustering?

  Q4. If the RAC is purely for Oracle Cluster databases - what is with the title "Real Application Clusters"? What's real on this subject?, what to ask?

  Q5. I also read that RAC can use 3^rd party of clustering. However if you decide that this is the case, then you need to install Oracle Clusterware when even (I think for interconnection must be created to allow the merger with Cache between Instances of node?).

  Is this the case?  If yes why never bore you with 3^rd party clusters? -Since you will have to install Oracle Clustering anyway - and I probably have to license (all I can think about is the scenario that you already have a cluster of 3^rd party in place and you decide that you need to use the same material for a database cluster)?

  All wisdom greatly appreciated,

  Jim

  Yes, with 10g, you had to use the CRS, and with 11g, to use the GI.  For 9i RAC, you would use Verits Cluster and Sun Cluster or anything else.

  11g RAC to GI.  As above, you can use clusterware extra if needed.  I gave the example above where to a 10g RAC we used the CRS to the cluster database/listener/vip and allowing groups of volume and filesystem in HACMP cluster.  File systems were not shared, but could switch to another node failure node, who has been treated by HACMP.  The volume of the groups containing the raw devices were shared volume groups.  For 11g, I never used extra clusterware on top of CRS and have always used ASM which is part of the GI.

  The application provider only certified database to run on 10g on AIX with raw devices.  What is strange about that?  It would be unusual that you probably expect to use ASM instead of raw devices, but it is what it is.

  See the following Note of Oracle for more information: using Oracle Clusterware with vendor Clusterware FAQ (Doc ID 332257.1)

  It is perhaps easier to explain if you can explain what problem you are trying to solve?

• vCloud SSO with a 3rd party identity provider?

  I have read that vCloud can be linked to vCenter which vCenter becomes the identity provider and vCloud Gets a SAML him for UNIQUE authentication token. I would like to use vCloud with a 3rd party identity provider that is supported by the CAs and also provide vCloud a SAML token.

  Is it possible to use an identity 3rd party with vCloud provider?

  N °

  Think about it this way as a string of past tasks.  The order is just different for both processes.

  System Administrators--> Login system--> vSphere SSO (User Identification)--> 3rd party Identity Provider (LDAP or SAML for authenticating)--> vCloud Director (authorization and access control)

  Users in the Organization--> Organization Login--> provider of 3rd party SAML (authentication)--> vCloud Director (authorization and access control)

• Premiere Pro CC 2015 ripple Edit Major Lag with 3rd-party Audio effects

  Greetings,

  I upgraded to CC 2015 from 2014 CC yesterday. Opens the project I had worked on to discover that when I realize a montage by waving there is a gap of 7 to 10 seconds before I can resume playback. When I edit by ripple the program monitor past from the view of the only program to place 2 view that shows you the exit point of the previous element and point to the next clip. At least that is what I think it does. It is difficult to say because as soon as I ripple the program monitor hangs for several seconds.

  It seems that it is a problem with the audio effects part that I loaded in the Audio Mixer of the track. I use a Native Instruments compressor and limiter vladg/sound. I use some effects audio stocks like left fill with law, right to complete with the left, equalizer and multiband compressor. I think I saw somewhere else on these forums that there are other issues associated with the allowed effects of iZotope in first. If I create a new sequence in the same project without audio effects, ripple edit works very well. This is a major issue because I have been using these audio effects in the Panel mixer Audio track for many months.

  I have no problems with these 3rd party in 2014 CC Prem audio effects.

  This is a recording of the program screen. https://Vimeo.com/131549297

  Here are my system specs:

  First Pro CC 2015

  Win 7 64 bit (up to date)

  I7 970

  24 GB Ram

  NVIDIA 970GTX (driver)

  500 GB SSD

  Internal 2 TB

  2 x internal 4TB

  3 TB internal

  12 to RAID 5 via USB 3.0

  USB 2.0 and 3.0 readers

  Audio device FireWire (M-AUDIO FireWire1814)... even if I'm not using it for reading. It is connected.

  Images East of C100 H.264. MTS, JPEG. MOV EI, JPG still images, simple titles in Premiere Pro and color mattes.

  Multiband compressor is certainly a problem with PP 2015 and trimming.  Try to delete this one and see how it goes.  Report results.