With release installed 31.5.0 today I no longer can connect to the pop server

Similar Questions

• RV082 with QuickVPN can connect to the Windows Server but not on Ubuntu Server

  We have a RV082 and are capable of using QuickVPN to connect and access our work LAN (192.168.0.0) except that we can not connect to a Linux Ubuntu Server on the local network.  Can ping (and shared access) servers Novell, a Windows 2003 server and several printers but not the linux server.

  192.168.0.1 Novell server can ping

  192.168.0.2 Server Linux ping or you connect

  192.168.0.3 Windows 2003 server can ping and connect

  192.168.0.4 - 11 different printers that I can ping and install

  I can ping and connect to the server using PPTP-Linux

  Troubleshooting tips will be greatly appreciated

  Good afternoon

  Review of your question, it would seem at first glance that the Ubuntu Server may be blocking incoming VPN traffic. I'm not sure of what firewall program you have chosen to use with your server Ubuntu, but make sure the ports 500, 4500, 443 and 60443 are open to traffic entering this subnet. If you can detect all the errors showing blocked traffic trying to hit the server, which can be useful in allowing us to determine why this traffic does not go through.

  Thank you

  -Lindsey

• Bulletstorm on W7 error""we must check the release date of your game, make sure that you are connected to the internet"on pressing ENTER.

  Original title: Bulletstorm on W7

  Hi, I installed Bulletstorm for my grandson on w7, on the start-up of the prog. It comes up with a "we need to check the release date of your game, make sure that you are connected to the internet" on pressing enter, he says: I am not connected to the net and unable to connect to live, even if that window is open!

  XM

  Given that Bulletstorm is not a product of MS, I suggest you cont EA (the developer) for assistance

  http://www.EA.com/Bulletstorm

• Do I need to install SP2 before SP3? If Yes, where can I find the Microsoft of SP2 version?

  I had to re - install Windows XP SP1a, from a CD of resettlement came with my Dell laptop. This was done because I upgraded the hard drive. This facility went well. I went to the Windows Update site to try to get the SP2 and SP3. The webiste is said to SP2 until you can do SP3. The only version of SP2, I find on the website says that it is for the professionals and see the link for the Service Pack to the simple version. When I go on this link there is no one version. Do I need to install SP2 before SP3? If Yes, where can I find the Microsoft of SP2 version? In addition, the site says that automatic updates SP2 but I checked my Configuration of the automatic updates and it will not take anything in. Is there a way to force the automatic update to run immediately? Thanks, Ben

  Ben,

  I totally agree with PML, you should be able to set up IE and then go to the Windows updates from there, once you get on the Windows Update site it will scan your system and implement critical updates and optional updates SP2 and SP3 should be on the list. It's a way to force an immediate update.

  I hope this helps.

  Jim

• Get 'no scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. "

  Original title: Windows Fax & Scan

  Hello, I just bought a new printer (Canon MG2450), and every time I try to scan something an error comes out.

  The error that says:

  No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. For more information about adding or troubleshooting scanners, see Help and Support.

  the printer is powered on and connected. I tried searching the Internet and I tried the TWAIN_32 and everything is good.

  What can I do?

  Daniel Capelle

  The scanner came with a CD to install the software?  Some more recent does not come with a CD, you must go to the Canon Website and you get the software.

• Cannot ping the default gateway with Centrino Advanced-N 6235 on XPS 12 but CAN connect to the Internet

  I have a XPS 12 with an Intel Centrino Advanced-N 6235 wireless card.  I can't ping the default gateway with the wireless card.  When I use a USB network adapter, I can ping the default gateway for the wired connection.  I can connect to the Internet and the internal network with the wireless card and can ping other computers on the network.  I am trying to run a program to connect wireless to a projector.  I have two different programs for the two different projectors.  I can connect by cable but not wireless.  I think that the problem is anything that does not make me a ping of the default gateway or something on the wireless card.  I have a 10 latitude with a Broadcom wireless card that is connected to the same access point and can ping the default gateway and can connect wirelessly to two projectors.  They all have two windows 8 Pro.

  I downloaded the new drivers from Dell, uninstalled, reinstalled, tried to update Windows install the drivers, all with no success. Any ideas?

  The solution of the problem by chance.  I was connected to the computer with a different network than what has been used to authenticate user account on the wireless.  When I switched the user account for the user account that was logged on to the computer was the same who authenticate to the wireless, it worked.  Go figure!

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• I can't stop the pop-up and adware ads in Safari. When I opened a new take, it is locked until I click a place twice, then two new tabs with advertising and virus detected by safari emerge

  I can't stop the pop-up and adware ads in Safari. When I opened a new take, it is locked until I click a place twice, then two new tabs with advertising and virus detected by safari emerge

  I tried following the instructions on the support page, in Apple, but it did not work.

  Force to leave Safari, then with the SHIFT key, restart Safari.

  Also use EtreCheck of www.etrecheck.com and see what else is running.

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• Windows Mail wants to open all attachments with Word rather than Word, Adobe, pad etc. How can I get the attachments to open properly?

  Windows Mail wants to open all attachments with Word rather than Word, Adobe, pad etc. How can I get the attachments to open properly?

  Hello

  1. Click the "Start" menu in the bottom left of Windows. Then select "Default programs".
  2. Click on the option "Associate any type of file or Protocol with a program."
  3. Select the file type you want to change the types of files listed. For example, if you want the text (.txt) file to open it in Microsoft Word instead of WordPad, choose '.txt '.
  4. Click on the "Change Program" button in the upper right window.
  5. In the list of programs, select "Microsoft Word". If Microsoft Word does not appear in the list, click on the button 'Browse' in the bottom right and choose Microsoft Word on your computer.
  6. Click on the button 'OK' and then 'close '. The next time you open this type of file, it will open it in Microsoft Word. Repeat this procedure for any other type of file you want to open in Word.

  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  It will be useful.

• Problem with USB auto connect with clients that connect through the Security server...

  Lack of VMware View 5.0.1 with 2 servers connection and a security server. When the clients connect directly to the server connection, USB connection works very well... users can use their USB drives and other devices with their VM. The problem occurs when they attempt to use their USB devices when negotiated through the Security server.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing so it does not always work... customers just to get the scrolling message of office in the USB menu initialization.

  Our current facility is:

  External IP address-> DMZ (Security Server)-> connect to server

  Entrust us our firewall config through our ISP (we are not overloaded with scientists here, it's just me, so things like little help my work load). They are certainly not incompetent (or at least were not in the past). I had to open the external 32111 IP port to the DMZ, then of the DMZ to our connection server that is used for external connections. Everything about VMware View works perfectly for the clients that connect this way, but not USB devices.

  One thing I give is if our having a configuration of VLAN dedicated for customers views influence what either. I'm trying to keep an eye on what ports are open that for our firewall for my records, but I do not see where I openly opened ports on the internal side of security server to our internal network. He must have the port opened directly from the internal face of security server of vmware 32111 discovers clients?

  The firewall Guys tell me that they checked over and over that port 32111 is open throughout the. They also said that they tried to telnet 32111 to our security server port and have nothing back (should have gotten garbage at least according to them).

  An idea of the next steps to take? It is obviously a blocked port, I just have no idea why at this stage.

  I know that port 32111 (TCP) must be open between the server security and the connection to the server, but even after doing it still does not work

  This is not what it takes. The agent is listening on the port 32111, you must open the firewall to allow connections to the Security server for the desktop on port 32111 (same thing you must allow RDP and PCoIP).

  Mike

• Install second connection to the web server at DB 10R2 running Apex 3.0.1.00.08

  All,
  
  I'm trying to add a second web server to move a part of the web traffic to another resource. I have a 3.0.1.00.08 instance that runs on the database connected to the web server and I just wanted to add a second connection to the front-end web server.
  
  The second is web server currently running SOA suite so it was logical financial to simply add another call on this web server.
  
  ServerA (existing web server) to connect successfully to the server b (existing database server).
  ServerC (new web server) to be connected on server b.
  
  Directory copied apex and images ServerC ServerA
  
  TNSNAMES. ORA on ServerC located under ORACLE_HOME\NETWORK\ADMIN
  ORCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ServerB.Address)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORCL)
  (SERVER = DEDICATED)
  )
  )
  
  Server c, I use SQLPLUS to connect to server b using APEX_PUBLIC_USER, correct password, ORCL
  
  Change ORACLE_HOME/Apache/modplsql/conf/dads.conf on ServerC
  
  Alias is ' ORACLE_HTTPSERVER_HOME\Apache\images / '.
  AddType text/xml xbl
  AddType text/x-component htc
  < /plex location >
  Order deny, allow
  Docs PlsqlDocumentPath
  AllowOverride None
  PlsqlErrorStyle DebugStyle
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  PlsqlDatabaseConnectString cn = orcl, cn = oraclecontext NetServiceNameFormat
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  PlsqlAuthenticationMode Basic
  SetHandler pls_handler
  PlsqlDocumentTablename wwv_flow_file_objects$
  PlsqlDatabaseUsername APEX_PUBLIC_USER
  Apex PlsqlDefaultPage
  PlsqlDatabasePassword correct_password
  Allow all the
  < / location >
  
  Restart HTTP_SERVER on ServerC.
  
  I get the error:
  Journal of the database failed
  
  TNS is unable to connect to the destination. Address provided is not a valid TNS or destination is not listening. This error can also occur due to underlying network transport problems.
  
  Ensure that the TNS name in the entry of the DAD for this URL connection string is valid and the listener of the database is running.
  
  ORA-12170: TNS: Connect timeout occurred error-Code: 12170 error TimeStamp: kills, 16 December 2008 20:35:58 GMT
  
  I thought it was weird since it's what worked on the other server and using sqlplus.
  
  I also tried to change the dads.conf file to use the following connection string:
  PlsqlDatabaseConnectString SERVERB:PORT:ORCL ServiceNameFormat
  
  No luck. Why the connection work with SQLPlus and not modplsql? What I am doing wrong? If not, how can I solve this?
  
  Any ideas?
  
  Thank you
  Keith

  Keith:

  Try to use the "SIDFormat" in dads parameter 'PlsqlDatabaseConnectString' instead of 'ServiceNameFormat '.

  CITY

• Cannot install Charter Security Suite - says I need to be connected to the internet

  Original title: attempt to re - install Charter Security Suite. Moved (last step) saying not connected to the internet.  Internet Explorer for accessing site more security and is running.  Solution?

  Charter Security Suite uses f-secure.  When I get to taking it up lst installI tells me must be connected to the internet.  Internet Explorer is running.  Is this a compatibility issue? or what?

  Hello

  1. The question is limited to the installation of Charter Security Suite?

  Click on the link provided below for the installation of Charter Security Suite® for Windows.

  http://www.myaccount.Charter.com/customers/supportgeneral.aspx?PAGETYPE=9

  You can also get in touch with the support of the Charter for assistance.

  http://community.Charter.com/

• Unable to connect to the PPPoE server with 2 BEFSR41ver

  I had to get a new AT & T DSL line to a new home with new ID and password. I've never had a problem with the router to the old address and the line DSL.  I've reconfigured the router with a new user name and password for PPPoE I got from AT & T for use with their new motoroal they sent me. The modem gives me the internet when I connect the modem directly to the computer.  When I connect the modem to the WAN port of the router with the computer connected to one of the LAN ports on the router, I get "Unable to connect to PPPoE" when I try to access the internet. When I connect the modem to one of the LAN ports with another port LAN from the router to the computer, I don't have the internet, but this is not recommended for the router cable management. With the modem connected to the WAN router and a power cycle performed port, I still get the same error message. I disabled my firewall and still have the same error message. I don't think I have another firewall to operate.  I never had this problem to my old address and line DSL AT & T with different ID and password and the same router.  Anyone know what is happening?  STEIN

  Your problem is that your "modem" is actually a "modem-router" and it uses the same subnet as the BEFSR41 192.168.1.x.  To resolve this issue, follow these steps:

  All first, reset your BEFSR41 factory default, then set the "local IP address" 192.168.2.1

  To do this, follow these steps:

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen).  Then, change the "local IP address" 192.168.2.1, then click the 'Save Settings' button and wait (3 to 60 seconds) of the screen refresh.  You will be probably disconnected from the BEFSR41.  Don't worry about this.  Turn off the BEFSR41 and your computer.

  (11) then, using an ethernet cable, wire the ethernet port of the modem to the Internet port on the BEFSR41.  Turn on your modem and enable good start.  Turn on your BEFSR41 and enable good start.  Turn on your computer.  Test your system, it should work.

  If you can not ' response to... ". "in step 9 above, your router is probably dead.  Report with this info.

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. In this case, a report with this problem.

  If you need additional assistance, please state the version of firmware on your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.