With the help of cfproperty with parameters

Similar Questions

• With the help of several outings on NI USB-6229

  Hello

  I have a question about the use of several output (input) on NI USB-6229. I request of programming where I use a few digital, digital inputs, outputs some analog outputs and inputs. Initialization of all the ports that I have in a Subvi, which lies in a loop for I control settings on the other for loop by using notifications. Problem is that this outpust is really slow (or reading entries), I want to say in my main loop I setting button, but it takes at least 1 s to change my outings (even with reading entries)? So I am wonderig what I am doing wrong. Can plesae you tell me what is the best way how to control several different ports?

  OK, so my whole program structure is like this:

  In primary Vi, I have a loop that subvis in other control loops. One of the Subvi is Subvi whichchange parameters at initialization Subvi. The structure on the photo. Please help me because I really don't know where is the problem. I use two converters AD / DA more and some machines that I am targeted by using the RS232 but it NEITHER original is the slowest.

  PS. If I turn on only parameter Subvi loop everythinf is much faster.

  OK problem with loops slow fixed http://forums.ni.com/t5/LabVIEW/Slow-parallell-loops-with-DAQ/m-p/1698988#M601731.

• Is it possible to delete a plot with the help of the mouse select the chart control?

  For example, when I use the plot to draw thousands of lines on the chart control, I want to delete some of them, but there are thousands of generated plotHandle.

  How can I get the plotHandle of the specific line on the chart control with the help of the mouse to select the option?

  If I save the information from the lines, such as the plotHandle and the coordinates on a table or list, etc, I compare information lines for the plotHandle of the specific line.
  Is it all a user-friendly way to remove a track selection on the chart control?

  I can't give you a reasonable way to solve this problem, since as you have already noted plot do not snappable plots.

  A possible warkaround would be to replace the plot of individual instructions with a PlotXY matching with 2 bays 2 points each, which correspond to the x 1, x 2, y1, y2 parameters to plot. PlotXY plots are snappable, so you can enable this procedure select the plot and remove it.

• How to call a method of the AM with parameters of Bean managed?

  Hello world
  
  I have a situation where I need to call the Managed bean (setDefaultSubInv) AM, under value changes Listner method. Here's what I do, I added the AM method on page links, and then at the bean call it
  
  Class [] paramTypes = {};
  Object [] params = {};
  invokeEL ("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
  
  It works and be able to call this method, if there are no parameters. Say that I pass a parameter to setDefaultSubInv(String a) method AM, I tried to call it bean but raise an error
  
  The string available = 'test ';
  Class [] paramTypes = {String.class};
  Object [] params = {DISP};
  invokeEL ("#{bindings.setDefaultSubInv.execute}", paramTypes, params);
  
  I'm not sure this is the right way to call the method with parameters. Can anyone tell how to call a method of the AM with bean to manage settings
  
  Thank you
  San.

  Just do the following

  1. your method in the Client Interface.
  2 - Add to Page Def.
  3 - Customize your Script like below one to reach your goal.

  BindingContainer links = getBindings();
  OperationBinding operationBinding = bindings.getOperationBinding("GetUserRoles");
  operationBinding.getParamsMap () .put ("username", "oracle");
  operationBinding.getParamsMap () .put ("role", "F1211");
  operationBinding.getParamsMap () .put ("Connection", "JDBC");
  Object result = operationBinding.execute ();
  If (! operationBinding.getErrors () .isEmpty ()) {}
  Returns a null value.
  }
  Returns a null value.
  }

  I hope it helps you
  Thank you

• With the help of box click to send an e-mail

  I am trying to create a feedback 'button' on the last page of my project. I am using Captivate 5

  As I had trouble to create buttons and making them work and present it clearly, I made a form, put the text on it and put a box to click on that. My navigation "buttons" work this way, if in the same project or go to another project.

  I chose in the Actions of the Properties section click on box to "send an email to" and in the address field, I entered the email address. However, when the project is published and played from the .swf file, by clicking on the box click does not create an open email (it does absolutely nothing). I don't have a transition, it is available for any length of blade, unlimited attempts, continue to play the slides and all other parameters outside the Action, are the same as the work "buttons" I.

  The only thing I can think who might contribute is we use Lotus Notes to our e-mail agent. Which would lead to the setting do not work, or is there another explanation?

  Thanks for any help.

  Your question black screen resembles recent that emerged after the release of the latest version of Flash Player 10.1.

  You probably have a subject of animated text somewhere in your presentation and you must apply a hotfix to Captivate 5 and then publish it again.

  Look at this page: http://blogs.adobe.com/captivate/2010/11/solution-for-cp5-content-not-working-with-the-lat is-flash-player - version.html

• With the help of dreamweaver.codeHints.addFunction () in CS4

  Hello

  I developed an extension (PHP Code indicators) that detects the functions and custom PHP variables and added to the advice of Code in Dreamweaver using dw.codeHints.addMenu () and dw.codeHints.addFunction (). It was developed on CS3. Now, the two functions have additional parameters on CS4.

  
  Indicators of Code PHP still works fine on the CS4 without any changes as variables (using AddMenu) are concerned. But using addFunction does not produce the desired effect: custom functions do not more appear in the code hints. Yet, they seem to be recorded somehow, since when you type the parenthesis after the name of the function in the source code, the name of the function and its arguments are shown as a ToolTip:

  

  

  Here is my code that works on CS3:

  function AjouterIndicateursFonctions (arrFonctions) {}
  var i = 0;

  
  

  If (arrFonctions! = null) {}
  Reset function codehints
  dreamweaver.codeHints.resetMenu ("CodeHints_Function_Arguments", arrFonctions [i], "PHP_MySQL");
  Inserts functions in codehints
  for (i = 0; i < arrFonctions.length; i ++) {}
  List of features reconstructions
  () dw.codeHints.addFunction
  "CodeHints_Function_Arguments", / / menu group
  arrFonctions [i], / / functions to add
  'PHP_MySQL', / / types of documents
  false) / / case sensitivity
  }
  }
  }

  CS4 documentation on dw.codeHints.addFunction () gives the new arguments, but it is not very understandable without an example (one given has not been updated since... MX?), and the types have not yet been described. I'm stuck on this problem and I can not find an answer. I was advised by David be able to ask the forum for help, especially from Randy Edmunds.

  So can you help me on how to use the addFunction() on CS4?

  Thank you in advance.

  Best regards

  
  Xavier Pitel

  AW, crud, I messed that up. Solution below:

  () dw.codeHints.addFunction
  "CodeHints_Function_Arguments", / / menu group
  arrFonctions [i], / / functions to add
  'PHP_MySQL', / / types of documents
  false) / / case sensitivity

  You must add more than 2 parameters to this call so that it looks like this:

  () dw.codeHints.addFunction
  "CodeHints_Function_Arguments", / / menu group
  arrFonctions [i], / / functions to add
  'PHP_MySQL', / / types of documents
  false, / / case sensitivity

  false, / / bClassPattern (default)

  true) / / bAddToObjectMethodList

  BAddToObjectMethodList setting is by default true as the documentation says, but you must use the value false. And there are several other settings between these 2, so here is what I used to make it work:

  () dw.codeHints.addFunction
  "CodeHints_Function_Arguments", / / menu group
  arrFonctions [i], / / functions to add
  'PHP_MySQL', / / types of documents
  false, / / case sensitivity
  "", / / object
  "", / / description
  "",             // icon
  "", / / source
  "", / / DocURI
  false, / / bClassPattern
  (false);         bAddToObjectMethodList

  I just added empty strings for other settings mimic the default values. Play with it and see if needed/wanted to put something in these.

  Kind regards

  Randy

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

• Anyone having problems with messages of script with the new version of GMail and Yahoo Mail? All the others seem fine and no problems with other browsers. With the help of FF25

  Gmail and Yahoo mail are very slow to load. I get a message from the script almost whenever instruct me to continue or to stop the script. Everything I have shut down or restart the browser goes blank and hangs. So, I have to restart Firefox. I followed suggestions on the help pages for the slow e-mail accounts or issues. (cleared cache etc, reset etc.) nothing solves the problem. I only noticed the problem since the first update of FF25. Scripts to stop even on these pages is not acceptable, because you are directed to the pages who insist you must restart scripts. It's a nightmare! Gmail both Yahoomail are very slow to respond to clicks more.

  Your list of details of the system shows that you have a user.js file in the profile folder to initialize some preferences at each start of Firefox.

  The user.js file appears only if you or another software created, therefore, normally, he wouldn't be here.
  You can check its contents with a text editor if you do not create this file yourself.

  The user.js file is read whenever you launch Firefox and initializes the preferences to the value specified in this file, so set of preferences via user.js can be changed temporarily for the current session.

  • http://KB.mozillazine.org/Preferences_not_saved

  You can rename or delete the prefs.js file and numbered possible prefs-# .js and the file user.js to reset all default prefs.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  Note that the folder "Application Data" in XP/Win2K and the "AppData" folder in Windows Vista and Windows 7 and later versions are hidden folders.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• ABP is blocking content from Ticketmaster, I tried to turn it off but it doesn't. I use Ticketmaster on my iPod, so I know that the problem is with the help of PBA.

  Tried different options of disabling with no joy. Don't know what else to do

  Try to start Firefox in safe mode. If there is no problem, then while
  a course in Firefox > Modules and delete the PBA. Then restart
  FF. If there is still a problem, Ad-Block can be reinstalled.

  ======================================
  

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• I get double Firefox screens declined downloads articles. With the help of FF19

  FF19 opens fine. However when I go to open an article reduces the brightness of the screen and when he returns to retouch the brightness, there are now two screens, one behind the other. When this happens, I am unable to do anyhting in FF and must end the process.

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.