With the help of Client VPN dial-up networking on L2l

I m tring to configure ASA 5505 with Cleint of VPN to access a remote network on a L2L with an another ASA 5505, but without success. There is a special function for this work?

Follow the topology

TKS

Hello

You must ensure that you have configured following

  • permit same-security-traffic intra-interface

    • This will allow VPN Client traffic to enter the ASA and leave the same interface
  • If you use Split Tunnel ACL with the VPN Client, make sure that the ACL has included Remote Site network
    • If you use complete Tunnel this wont be a problem
  • Make sure that the ACL of VPN L2L that defines "interesting traffic" includes the pool of Client VPN on both sides of the VPN L2L
  • Configure a NAT0 on the ASA of Client VPN 'outside' interface that makes NAT0 for pool of Client VPN Remote Site network

If you have a real-world setting to share I can try to help with those. Otherwise I can only give general things like the above to check.

-Jouni

Tags: Cisco Security

Similar Questions

  • With the help of VMware CP in DMZ networks

    Hello

    I am familiar with the installation and configuration of the PC, but I have a requirement for a customer that the network consists of many DMZ networks, which are all protected by a firewall between them for safety reasons.

    Is there a way that CP can be configured for statistics before several data collectors, located within the DMZ networks to a central collector, related to the data warehouse?

    There is no way that my client can open the ports required for 'normal' data collection, and I was hoping that there would be some sort of SSL connection between the collector in the demilitarized zone and the main collector on the local network.

    The only other option would be to create a single data for each DMZ collector and record each as a separate company...

    You can do in case of problems. After you have created the company, you add can all collectors by going to the company-> save the database ID and click on the Add button. After the first synchronization, wait a few hours and create a project and associate all systems.

    I've done a few times for the same exact reason and it works fine.

    There is no built-in way to link collectors I know. I guess you could plan a robocopy to move each utbox files in a central shipping box, but it would be a pain.

    Dave

  • Problems with the help of Deskjet 3745 on home network 2-PC

    I have an old PC running Windows XP SP3 and a new one running Windows 7, but only one printer. The network that connects the PC is on an ADSL router with its own external Iomega network drive with a USB port.

    To make the printer can be used on two computers,

    1. I initially plugged on the Iomega USB port. But the port was effectively a 1-way connection, so I couldn't preview before printing to see which form/profile of the printer used. So I put discarded and...
    2. revenue to the printer connected to a PC all the time and share it on the network. But two different PCs drivers needed which would not talk among themselves, and the establishment would simply not work.
    3. Finally, I went back to the simple method of the printer on the USB port of any PC, sure I needed it for us. Worked well for a while until the WINDOWS 7
    • Print preview has begun showing empty images (but print correctly).
    • print-queue doesn't have to face the cancelled documents.

    I had help of Deskjet Support to address this issue, which even reinstall the drivers on two PCs - several times! But I'm still left unresolved 3 problems with Win 7 donations.

    Has anyone encountered a similar situation and found a satisfactory solution to work?

    Try the following: connect the printer to the XP computer and set the machine XP to share it on the network.  On the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select (not Hewlett-Packard) HP Deskjet 3740 series (Bobo).

  • With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM

    I can't use by net cooking system indicates error java and java download does not work with my system with windows 7 giant premium 64 bit computer laptop.

    REPRT ERROR:

    Java plug-in 10.7.2.11
    With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM
    Home Directory user = C:\Users/
    ----------------------------------------------------
    c: clear console window
    f: finalize objects on the finalization queue
    g: garbage collection
    h: display this help message
    l: dump classloader list
    m: print memory usage
    o: trigger logging
    q: Hide console
    r: reload the policy configuration
    s: dump system and deployment properties
    t: dump thread list
    v: dump thread stack
    x: delete the cache of class loaders
    0-5: set the trace level

    Hello

    1 are you facing this problem with a specific Web site?
    2 are you having the same problem on other browsers as well?
    Please follow the links below to solve the problem.
    Method 1
    How to troubleshoot script errors in Internet Explorer
    Note: follow the steps as troubleshooting applies to JAVA issues.
    Step 2
    How to enable Java in my web browser?
    Method 2
    If you still face problems, please uninstall and reinstall JAVA
    Remove all traces of the failure of the Java installation by uninstalling Java:
    Install Java
    I hope this helps.
  • SVN: #155021. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information on this problem

    Can Hello anyone help?

    After you configure Subversion in Dreamweaver, I get this error again!

    SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.

    even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'

    with & without quotes, with or without; before C

    command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'

    I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?

    Just a reminder!

    1. I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
    2. I managed to get the latest SVN version
    3. Lock, unlock and commit a file
    4. Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
    5. I also tried the same thing in the User Variables
    6. Installed the extension DW Subversion compatibility

    7. Tried to run the compatibly with the command > Subversion comparability in DW

    Welcome any suggestion to solve this?

    Hello

    There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.

    As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.

    PZ

  • With the help of ActiveSync

    I just got the Samsung Galaxy S4 and I'm looking to find an e-mail with the help of ActiveSync client; However, it is precarious with our administrators having the ability to remote wipe our personal devices. In short, with are all the other available similar policies and remote wipe sandboxed for this application? or apply to the device as a whole? There may be a white paper available to read more about this? Is there a free trial of this application to test the feature?

    Thank you

    Neil

    Hello

    The app is designed to comply with Android Device Policy Manager, so he's going to wipe the device when receiving the order of deletion from the server.

    Management of workspace on personal devices is supported in VMware Horizon Mobile products:

    http://www.VMware.com/products/desktop_virtualization/mobile/overview.html

    To the point, we don't have a free trial version.

  • With the help of several conditional tags with multiple outputs of WebHelp

    I have a project that I created for a web application. Within the web application, there are 3 types of customers (business Accts, Accts National and level 1 clients).

    I added each help topic associated with the help topics that I created.

    Then, I created 3 outputs of webhelp and 3 Table of contents for each type of client.

    My goal is to publish the project, where each type of client has their own output generated. Do it this way, which is listed in the help topics of table of contents for each type of customer that is not correctly displayed.

    Example: National accounts TOC

    What is generated:

    I have tagged in the table of contents to the conditional tag appropriate help topics. Help, please. Any advice? I can also be reached at [email protected]

    None of your screenshots came through - the icon of camera in the web interface allows you to attach images

  • Known problems with the help of 64 bit Essbase with version 11 planning?

    Hello Experts,


    One of my clients is considering moving to the 64-bit Essbase. Are there known issues with the help of 64 bit Essbase (11.1.1.0.00) with the version 11 planning?


    Thank you

    Jingle

    I tested and there is no problem at all, if your planning server is 32-bit, you just install the 32-bit Essbase client that can communicate with the 64-bit server.

  • My AirPort Extreme end not implemented with the help of AirPort Utility

    Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

    When I try to set up as a Wireless extender...

    Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

    .. .it will not accomplish the synchronization upward with AirPort Utility.

    Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

    Open AirPort Utility

    Click the AirPort Utility menu in the upper left corner of the screen

    Click on about AirPort Utility

    Report on the version number you see here

    You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

  • With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

    Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

    maryml wrote:

    Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

    Press and hold on the text and wait for the copy/more pop up.

  • With the help of Club running on the Nike watch +.

    Hello

    This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

    As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

    Hello

    You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

    More information:

    https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

  • With the help of old gear series noon on El Capitan

    I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

    There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

    Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

    Thank you

    Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

  • With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

    With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

    Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

    If that's you then pictures will miss a lot for you.

    If this isn't the case, then opening was probably overkill for your needs.

    If you like the pictures then this is the way to go.

  • Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

    With the help of Mac 10.9.4
    If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

    It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

  • Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

    Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

    Would you like to share why you must do a clean install?

    You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

    Computers that can be upgraded to use OS X Internet Recovery - Apple Support

    PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

Maybe you are looking for

  • Satellite Pro U400 - audio quality is not good

    OK this problem has been plaging me for years. I have a Toshiba Satellite Pro U400 windows 8.1. The sound quality is terrible.I can remember it's bad in windows 7. Contextant driver is bad, and so is the generic driver windows 8.1. Help, please

  • Can not format or partition the drive HARD on Satellite M30

    I have a Toshiba Satellite model No. PSM30EAnd the system is unable to access the HARD disk.When I check the Bios setup it can detect the HARD drive. When I run windows setup to boot from the CD he sees the HARD disk with the correct size, but it can

  • NY538AA: low battery to woreless message from the keyboard on momitor

    After changing the batteries in the keyboard of energizers twice the low battery WARNING kepps reappear. How can I get rid of this?

  • Envy 17 t N100 CTO: HPservice.exe

    Hello One wonders about this HPservice.exe file. Some sites claim the exe should not be there and it is a virus. I just got a new cell phone Envy 17 t n100 CTO with pre-installed Win 10. I just started loading software. System Mechanic it reported as

  • What is the Windows Installer requires a drive of market research?

    all of a sudden when I try to print something a box appears saying that the ' '...      "WINDOWS INSTALL NEEDS A DISC"MARKET RESEARCH. " I DOWNLOADED ALL THE PATCHES FOR XP AND ALSO DELETED AND REINSTALLED THE PRINTER.  WHAT IS THE MICROSOFT REPAIR I