With the help of VMware CP in DMZ networks

Similar Questions

• With the help of VMware ESX in a business continuity Plan

  I'm looking to set up a Plan for continuity of the business using Vmware ESX. I would like to install an outside site that will duplicate a few key servers. Does anyone have any ideas on how I can do this with ESX? Is it as simple as pushing Server snapshots to the offsite location? Any ideas...

  Thank you

  Scott

  Hello

  Welcome to the forums.

  I'm looking to set up a Plan for continuity of the business using Vmware ESX. I would like to install an outside site that will duplicate a few key servers. Does anyone have any ideas on how I can do this with ESX? Is it as simple as pushing Server snapshots to the offsite location? Any ideas...

  One thing to know is that a snapshot in terms of "VMware" is not a full copy of the disc, it is a file that contains the changes to the drive block since the snapshot was created. Snapshots of assistance in making backups of virtual machines running, but allowing the basic disk to copy while the data is written to the snapshot. Then, you're the snapshot.

  So how do DR/BC is having a good backup strategy using one of the available backup/replication tools.

  There are:

  Veeam Backup w/replication

  Vizioncore vRanger backup and vReplicator for replication connection

  EsXpress doctorate for backup (restorations of use for replication)

  There is also some SRM if your San is supported, etc.

  So there are a lot of options the question is how 'real time' you need the data. You could also use the replication SAN, Double Take, etc.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Now available on Rough Cuts: ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment '
  Also available "VMWare ESX Server in the enterprise"
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• With the help of Client VPN dial-up networking on L2l

  I m tring to configure ASA 5505 with Cleint of VPN to access a remote network on a L2L with an another ASA 5505, but without success. There is a special function for this work?

  Follow the topology

  TKS

  

  Hello

  You must ensure that you have configured following

  • permit same-security-traffic intra-interface
    • This will allow VPN Client traffic to enter the ASA and leave the same interface
  • If you use Split Tunnel ACL with the VPN Client, make sure that the ACL has included Remote Site network
    • If you use complete Tunnel this wont be a problem
  • Make sure that the ACL of VPN L2L that defines "interesting traffic" includes the pool of Client VPN on both sides of the VPN L2L
  • Configure a NAT0 on the ASA of Client VPN 'outside' interface that makes NAT0 for pool of Client VPN Remote Site network

  If you have a real-world setting to share I can try to help with those. Otherwise I can only give general things like the above to check.

  -Jouni

• With the help of VMWare Player in internet cafes

  I'm hoping to take a virtual machine from a development environment rudimentary vacationing European cycling for emergency repair work (SQL Server, Microsoft Access, etc.). I had intended to put the virtual machine on a S200 personal IronKey 16 GB Secure Flash Drive: https://www.ironkey.com/personal.

  I would use this VM in internet cafes. Is it possible to run the virtual machine without installing the player on PC for a coffee? For example, it is possible to rotate the player from the same flash player?

  Thank you.

  VMware Player must be properly installed on the host system. Also running the VMS in a drive USB Flash can be very slow with a lot of latency, and I wouldn't recommend well it's certainly doable.

• With the help of VMware workstation 7 on Win 7 laptop

  Hi all

  Out of curiosity, someone at - it never try to install VMware workstation on Windows 7 with 4 GB of RAM (Intel® Core™ i5 - 520 M processor (3 m Cache, 2.40 GHz)

  I intend to run SharePoint server 2010 beta on this laptop for a demo and I was wondering if it is recommended or not?

  Thank you.

  Kind regards

  AWT

  I run WS 6.5 on a laptop of recent Dell game (1 year) with 4 GB of RAM with Windows 7 64-bit. In fact, I have 4 ESX and Vcenter that run in WS 6.5 for education. You need a 64-bit version of Windows to use 3 GB or more due to limitations of 32-bit Windows.

• Publish with the help of VMware thin App

  So far, I have:

  Created a package on the deployment server

  Moved the .exe to a folder named DeployMS at the root of C:\ on this server

  Machine for the MSword.exe and created a shortcut from a XP lance Word very well.

  So now, I copied ThinReg from the server to the XP Machine deployment

  and created a file locally beats on the C:\ of the xp machine that has:

  c:\Thinreg.exe/r/a ".
  & lt; Server name & gt; \DeployedMS\MSWord\Microsoft Office Word 2003.exe

  But the word is still not save.  No shortcut in the start menu, can not open .doc to the file. ect...

  Can someone tell me please in the right direction.

  The account has access to the location of the file on the server?

• Problems with the help of Deskjet 3745 on home network 2-PC

  I have an old PC running Windows XP SP3 and a new one running Windows 7, but only one printer. The network that connects the PC is on an ADSL router with its own external Iomega network drive with a USB port.

  To make the printer can be used on two computers,

  1. I initially plugged on the Iomega USB port. But the port was effectively a 1-way connection, so I couldn't preview before printing to see which form/profile of the printer used. So I put discarded and...
  2. revenue to the printer connected to a PC all the time and share it on the network. But two different PCs drivers needed which would not talk among themselves, and the establishment would simply not work.
  3. Finally, I went back to the simple method of the printer on the USB port of any PC, sure I needed it for us. Worked well for a while until the WINDOWS 7
  • Print preview has begun showing empty images (but print correctly).
  • print-queue doesn't have to face the cancelled documents.

  I had help of Deskjet Support to address this issue, which even reinstall the drivers on two PCs - several times! But I'm still left unresolved 3 problems with Win 7 donations.

  Has anyone encountered a similar situation and found a satisfactory solution to work?

  Try the following: connect the printer to the XP computer and set the machine XP to share it on the network.  On the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select (not Hewlett-Packard) HP Deskjet 3740 series (Bobo).

• With the help of com 1

  I have VMware 7.1.6 build 744570. With the help of 'Virtual Machine Settings' and 'Add', I am able to create a serial port as "serial port 2" and "serial port 3", but I can't create port 1 (a.k.a. com1).

  Someone at - it ideas?

  By default, the tool ThinPrint VMware uses COM1.  He is the host printer can be used without having to install specific printer drivers in the comments.  I normally do not use ThinPrint so I just remove the printer settings of the virtual machine and then when I add a Serial Port, which he defined as COM1.

• With the help of ActiveSync

  I just got the Samsung Galaxy S4 and I'm looking to find an e-mail with the help of ActiveSync client; However, it is precarious with our administrators having the ability to remote wipe our personal devices. In short, with are all the other available similar policies and remote wipe sandboxed for this application? or apply to the device as a whole? There may be a white paper available to read more about this? Is there a free trial of this application to test the feature?

  Thank you

  Neil

  Hello

  The app is designed to comply with Android Device Policy Manager, so he's going to wipe the device when receiving the order of deletion from the server.

  Management of workspace on personal devices is supported in VMware Horizon Mobile products:

  http://www.VMware.com/products/desktop_virtualization/mobile/overview.html

  To the point, we don't have a free trial version.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?

  Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.

  If that's you then pictures will miss a lot for you.

  If this isn't the case, then opening was probably overkill for your needs.

  If you like the pictures then this is the way to go.

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.