With the help of satellite server reside co with vanity URL

Similar Questions

• With the help of COM server to call testing in TestComplete

  Hello

  I use the adapter COM call testing in TestComplete.  I could always successfully and run the first test using the call sequence, but when I try to call the second test with a different calling sequence, I get the message "Cannot start another instance of this application" and "doesn't have to"Create a new object"in automation call.»
  Server execution failed [error Code:-17502] ".»

  I tried to use the option not to load and unload in the Option run and I received another message "IntegrationObj = null.

  My setup is I have a Master file of sequence that contains two sequence files (one for each trial).

  The individual called movie file have 4 steps as indicated:

  Get property: Create the new object

  calling a method to open project

  Call the method to run the test

  Get the result of the property

  Thank you very much for the help.

  Thanks Doug, I'll try that.

• With the help of satellites LP500 - 14L as screen for PS3

  Hello, dear administration and all users; )
  I am really pleased to join this forum and hoping to get some useful experience with it :)

  Then. the question is in the topic... I'm just curious about it... In the eyes of the average user, it seems possible, PS3, and almost all modern laptops
  It is possible to have a HDMI output to plug into the PS3 for ordinary LCD... Why should not be the same with a laptop computer?

  I have red some post in different forums... and unfortunately it doesn't seem to be as simple as resembles.
  Some people say:
  (1) you can't do because laptop HDMI does not support the video entry
  (2) certain words, you can, but only with TV tuner and only with normal connection with 2 drivers, as readers DVD, older consoles are connected

  Both variants are unhappy :)), even for a second because probably quality picture going to be bad and not pleasant that when connecting PS3 via HDMI.

  Maybe someone can give a list what laptops support entry VIDEO for everyone to know. Mine is SATELLITE P500 - 14 L, it has 18 inches and I think it would be good to put on like a PS3 sometimes :)))

  > 1) you can't do because laptop HDMI does not support the video entry
  Just the phone cannot receive video signals from PS3 and this is the reason why you are unable to connect the PS3 to the laptop and use the internal display.

  I remember at the beginning Toshiba Qosmio G20 a video taken in charge by port (but not HDMI)
  Using this port you can connect an xbox and could use the internal display.

• With the help of Satellite L30-10 X without battery

  1. is it safe for laptop use without battery?
  2. I would like to know, if the battery is fully charged and inserted into the laptop, have an effect on the battery if the laptop is plugged.

  1 using the laptop without the battery inserted is safe.
  2. If the battery is fully charged, the charge will stop. I don't think it has negative effect if the laptop is plugged in, but if you use always plugged in, maybe you should use it without battery. But in this case, you must be careful, because sometimes you must charge the battery.

• With the help of MS PRO Duo into the slot of the Satellite A200 MDMC

  I have a problem when inserting a Memory Stick PRO Duo SanDisk (512 MB) card with the help of Memory Stick Duo adapter in the card of my Satellite A200 - 1 M 8 (PSAE6) on Windows Vista Edition Home Premium.
  The device includes the insertion of the card (Windows notifies with the sound and the icon in the notification area).
  But then the computer window starts flashing and I can't open the disk of the card. OS always says insert the card in the card slot opening.

  I found the following statement in the manual of the laptop (Chapter 8 - optional devices):
  Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. :(

  But before that, I found this thread in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=101843𘷓
  The guy said that he has been successful and his position has been marked as the answer!

  Anyone know how to use MS PRO Duo in the locations of memory A-200?
  Thanks in advance.

  I put t believe that!
  First the user manual it says:
  -Memory Stick * PRO Duo *.
  -Memory Stick * Duo *.

  cards or adapters are not compatible with the multiple digital media card slot.
  In this case you cannot use the possibilities mentioned above!
  See the list given by Juan28 in the other thread.

  What you can do is to use the * Memory Stick * or * cards Memory Stick Pro *.
  I don't know but maybe the cards Memory Stick or Memory Stick Pro m is available for the Memory Stick Duo or Memory Stick Duo PRO working but to be honest I don t think so.

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• With the help of AUSST - latest updates of Adobe CC 2014 are not uploaded to the server - how to solve this problem?

  With the help of AUSST - latest updates of Adobe CC 2014 are not uploaded to the server - how to solve this problem?

  I tried both incremental and train to do a fresh install (. / AdobeUpdateServerSetupTool - root = "/ serverroot/updates / Adobe / CS '-fee)

  If anyone can answer this - please let me know.

  Hi Mark,

  Try to refresh the web server and run the AUSST with cool switch. In addition, please make sure that you have enough disk space available in the location of the server.

  Thank you

  Ashish

• With the help of my signature via a proxy server does not terminate but not from RIM

  I now use the signature Server successfully to sign sensitive data on the device

  associated with our application.

  However, when trying to sign full RIM signatures through a proxy server, and my

  Server deals in reality as well and even send emails of success, but the signing tool

  does not receive a final acknowledgement that he search and eventually times out.

  I noticed for RIM signatures that we are hitting servlets, while the default configuration value for our

  signature server is used.

  Is there something we need to do for our server works correctly when it is connected through the proxy?

  NOTE: everything works fine when the server is on the same network as the GIS tool.

  Thank you

  Mark

  It turns out that it's the server signature RIM as I expected.  It does not return the appropriate response headers.

  The server does only return HTTP/1.1 200 OKCRLF and then the payload.  We discovered

  If we put an Apache proxy before the server signature and after our proxy

  that it will accommodate the non-standard answer and mark the headers with a stored block transfer

  coding and then all is good.

  So the reason why the public signature RIM servers work through the proxy must be either because the bug

  This server is fixed or a proxy because Apache-like sitting in front of the signature server.

  I hope that this will save others some grief in the future.

  concerning

• With the help of Oracle heterogeneous access table to sql server database services

  I created a dblink "POC_HS" of oracle to sql (heterogeneous services implemented) and I can't go out data from the default database to which the DSN (for sql server) is connected successfully.
  
  So, this ' select * from ' Test@POC_HS is works perfectly well on the Oracle database as 'Test' table resides in the default database (that the system DSN is connected to).
  
  But when I do ' select * Abc.Test@POC_HS' where the Test table resides in the 'ABC' database which is not the default survey database an error as follows:
  
  ORA-00942: table or view does not exist the name of incorrect [generic object using ODBC Connectivity] [Microsoft] [ODBC SQL Server driver] [SQL Server] 'Abc.Test '. [Microsoft] [ODBC SQL Server driver] [SQL Server] Instructions could not be prepared. (SQL State: S0002;) SQL code: 208)
  
  I also tried "select * from Abc.dbo.Test@POC_HS' but oracle throws this exception" ORA-00933: not correctly completed SQL command "."
  
  The dblink and system DSN user account has access to database 'Abc '.
  
  Thoughts?

  No, this is not possible.

• With the help of the mouse click to return the coordinates of the image.

  Okay, so I tried to find a way to do it, and it seems very complicated for something that sounds really simple.

  Anyway. I have a camera that updates an object image on the front panel using a while loop. I have another image object that is updated with a still image when you press the button "snap." Now what I want to do is to click on a point in the image that are broken and have the VI to return the coordinates of this pixel as part of coordinated image.

  What I have so far is a structure of event in the while loop with the following to happen where "image object-> the mouse down:

  Server reference (reference to the image object)-> property (last position of the mouse)-> output coordinated screen node.

  I have two errors that don't make much sense to me (I have not worked with before event structures): ' event data node contains terminal unwired or bad "and"structure of the event one or several cases of event have no defined event. " This second shot seems odd because I don't actually want nothing to take if there is no click of a mouse. The first seems to refer to the box of the element on the left side of the structure of the event.

  Above is my last attmpt to the trouble of sorting and as far as I can see it should work. whatever about the errors, I even take the right approach with that? I would have thought cordinates image would be quite common but seek advice here, it does not seem...

  A bit puzzled here. Any help is very appreciated.

  Hello RoBoTzRaWsUm,

  I took a glance at your VI, who took a correct approach to the data you are looking for.  As you structure to aid and the event, you should look for an event to occur.  When you use a property node, you try to read an attribute of a control.  However, in a Structure of the event, I think you should use a node to invoke.  Allows a node to invoke your read an event or write a method with the control class in LabVIEW.

  1. place down and call the node in the Palette of functions in "Programming"-> "Application Control".

  2 wire your reference Image control to this

  3. click on the method, and then select 'get a last event. "

  4. right click on "Events that" and "create Constant.  Do the constant '1' in the table

  5. read the Cluster "Contact information" from the left side of the case of the event by clicking and "create indicator.

  You will find a piece of code attached example.

  Concerning

• DNS issue with the new Web site server

  Join this forum site that I have allways had to change to a new server of the host due to problems. The new server host is currently working on the site, but whenever I try to arrive on the site that I am transferred to the OLD server host (which showed a blank screen unusable).

  There is a way I can get on the site with the new server host BUT that is to go into the command prompt and enter the following WHENEVER I want to get on the site... ipconfig/flushdns - ipconfig/release - ipconfig / renew.

  Is it possible that I can get on the new host of the website WITHOUT getting transferred to the old server and without going into the command prompt and to play with the DNS settings every time?

  As soon as possible.

  Thanks for the help m8, I talked to the owner and it has been removed and deleted the old server now, and everything is good :)

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Errors in the charge installing vcenter Server 5.5 with respect to the SQL database

  I do a new install of vCenter Server 5.5 on a new Windows 2008 R2 server. The database for this facility is pointing at a 32-bit Windows 2003 SP2 server. I installed SQL Native Client 10.0 on server vCenter Server 64-bit, and then I could make my DSN ODBC 64-bit connection. The vCenter Server install could very well recognize it, but after the installation got going he wrong on the database with the following error:

  Error 25003.Setup cannot create vCenter Server repository. The main reasons for this failure are:

  -The database is installed using insensitive case.

  -The database is remote and the client database version does not match the database version. If this problem continues to persist, see KB 1003960 for further assistance.

  Well, I know that the version of the client and the version of database do not match. SQL native client on the sql server is 9.00.5000.00 and the version on the server vCenter Server is 10.50.1600.1.

  I know that this version of vCenter is compatible with an installation of 32-bit sql server 2005 on a 32-bit server, 2003.

  I am not familiar too if they want upgrade me sql native client on the sql server, but is not compatible with the version of sql server on this server and there are several database for other applications on this server, so I don't want to jump into something like that.

  Any help would be greatly appreciated.

  Thank you.

  I install the native client SQL 2005 and give a shot.

• With the help of ActiveSync

  I just got the Samsung Galaxy S4 and I'm looking to find an e-mail with the help of ActiveSync client; However, it is precarious with our administrators having the ability to remote wipe our personal devices. In short, with are all the other available similar policies and remote wipe sandboxed for this application? or apply to the device as a whole? There may be a white paper available to read more about this? Is there a free trial of this application to test the feature?

  Thank you

  Neil

  Hello

  The app is designed to comply with Android Device Policy Manager, so he's going to wipe the device when receiving the order of deletion from the server.

  Management of workspace on personal devices is supported in VMware Horizon Mobile products:

  http://www.VMware.com/products/desktop_virtualization/mobile/overview.html

  To the point, we don't have a free trial version.

• Problem with the help of HLS HTTP Streaming on AMS 5

  Hello

  I use 5 AMS and try using HLS http streaming to devices mobile iOS.

  When I try to open URLs of flow hls http://host-NAMEL/HLS-live/livepkgr/_definst_/LiveEvent/Livestream.m3u8 I noticed as " " Livestream.m3u8 was not found on this server"."

  
  

  http://host-name/HDS-live/livepkgr/_definst_/LiveEvent/Livestream.F4M Watch

  " < manifest xmlns =" http://ns.Adobe.com/F4M/1.0 ">

  livepkgr/events/_definst_/liveevent < id > < /ID >

  < mimeType > < / mimeType >

  < streamType > live < / streamType >

  < duration > 0 < / time >

  < / manifesto >

  When I start streaming via OUT AMS living newspapers I see

  Name of the stream is: liveevent and the event is live: liveevent

  F4F:LiveEvent - NetStream.Data.Start

  F4F:LiveEvent - NetStream.Publish.Start

  F4F:LiveEvent - NetStream.Play.Reset

  F4F:LiveEvent - NetStream.Record.Start

  F4F:LiveEvent - NetStream.Codec.Error

  But there is no information on *.m3u8

  I use the configuration of default adobe with appache included for installation of AMS.

  What can reason do not work HLS.

  Also cannot find information on CTS in appache logs

  Sorry for my English.

  Well, it's good looks.

  m3u8 is a kind of playlist where the player to get the meta-to play different pieces in order to view a livestream.

  Initially, you will have to wait a few seconds (I think 30 by default) the AMS can display these pieces.

  M3u8 Url´s can only be displayed in specific players (JWPlayer for example) or on browsers as native Safari (osx / ios). I'm not sure playing m3u8 Url´s on Android devices.

  But I you enter this URL in your safari on a mac or iphone / ipad, you will see the livestream.

  Another problem could be the mode "full screen", which is forced on iOs for some reason. On the iPad, you can play the inline flow as well as an additional parameter (webkit-playsinline = "1"-> works only on ipad).

  Hope that helps a little... If you don't have any OSX / IOS device for the test, just start a data stream and send me your url via private message. I can test it for you if you want

  !