With the help of the CocoDialog in AppleScript progress bar

Similar Questions

• iPad 2 Mini stuck on the progress bar with the Apple logo and progress bar is not loaded, his impasse

  I pressed on restart all the settings on my iPad Mini 2, so it loaded but it drained. So I rebooted it until he turned back when he turned his back, it was still showing the progress bar, but it was quite moving. I tried to hold down the lock button and the home button, but still, it loads, its stuck on the progress bar and did not progress. I tried to connect to my computer to connect to itunes, but it does Duke host because its deadlock on the progress bar with the apple logo.  .pls help me!

  Try restoring your backup and recovery mode: If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• Funny question with the use of applescript to set the position of the quicktime window

  I use an applescript script in automator to start a recording quicktime. When I run the applescript to automator, everything works fine, but when I run the same sequence as a double-clickable application automator, it throws an error * when it gets to this line:

  Tell application "system events" to indicate the process "QuickTime Player" to set the position of the window before {1131, 725}

  Any ideas as to why?

  Thank you!!

  * Error is just, "the"Run AppleScript"action has encountered an error"

  Hello

  Do not use events from system but QuickTime Player itself to manipulate the window, especially when the scripts via the events system tends to be blocked under recent operating systems, even with special measures to release.

  Like that.

  set {x, y} to {1131, 725}
  tell application id "com.apple.QuickTimePlayerX" -- QuickTime Player X
      tell window 1
          set {l, t, r, b} to bounds
          set bounds to {x, y, r - l + x, b - t + y}
      end tell
  end tell
  

  or it-

  set {x, y} to {1131, 725}
  tell application id "com.apple.quicktimeplayer" -- QuickTime Player 7
      tell window 1
          set {l, t, r, b} to bounds
          set bounds to {x, y, r - l + x, b - t + y}
      end tell
  end tell
  

  Kind regards

  H

• Problem with the google in Firefox search bar

  Last week the google search bar began to do all the searching through the site google.nl Dutch. He has never done this before. I'm in England, and the search bar has always used google.co.uk by default. I don't know why this has changed. I have not modified any settings and I use the version the most up-to-date Firefox on my Windows laptop, 8. Change the settings of google through the google Web site does not help.

  Well, Google thinks he knows better than us...

  Perhaps it would work better to install a plugin for Google UK-specific search. This page has two options:

  http://mycroftproject.com/Google-search-plugins.html

  Look for these:

  • Google UK (SSL)
  • Google UK - United Kingdom (SSL)

  After installation, you should probably use the search bar drop-down list to select the new search plugin in the bottom of the list.

  You could also check your connection here:

  "3-bar" menu button (or tools) > Options > advanced > tab mini network > button "settings".

  The default "use system proxy" should piggyback on your LAN-Windows/IE settings, but you can also try the 'no proxy' to see if that changes anything.

• Problems with the Transition of custom components bare in s:TileGroup

  I have a problem with transitions play does not correctly on a custom component that is displayed in a < s:TileGroup >.

  Code of the custom component;

  <?xml version="1.0" encoding="utf-8"?>
  <s:SkinnableComponent xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark"
   skinClass="com.mydomain.view.skins.SkinFile">
   
   <fx:Metadata>
    [SkinState("normal")]
    [SkinState("photo")]
   </fx:Metadata>
  
   <s:states>
    <s:State name="normal" enterState="invalidateSkinState()" />
    <s:State name="photo" enterState="invalidateSkinState()" />
   </s:states>
   
   <fx:Script>
    <![CDATA[
     override protected function getCurrentSkinState():String {
      return currentState;
     }
    ]]>
   </fx:Script> 
   
  </s:SkinnableComponent>
  

  The skinfile itself is relatively simple

  <?xml version="1.0" encoding="utf-8"?>
  <s:Skin xmlns:fx="http://ns.adobe.com/mxml/2009" 
    xmlns:s="library://ns.adobe.com/flex/spark" 
    xmlns:mx="library://ns.adobe.com/flex/mx"
    width="300" height="200" width.photo="140"
    >
     
   <fx:Metadata>
    [HostComponent("com.mydomain.view.components.MyComponent")]
   </fx:Metadata>
   <s:states>
    <s:State name="normal"/>
    <s:State name="photo"/>
   </s:states>
   
   <s:transitions>
    <s:Transition autoReverse="true">
     <s:Resize target="{this}" duration="500" />
    </s:Transition>
   </s:transitions>
   
   
   <s:Rect id="rect" radiusX="15" radiusY="15" top="0" right="0" bottom="0" left="0">
    <s:fill>
     <s:LinearGradient rotation="90">
      <s:GradientEntry color="0xffffff" ratio="0" />
      <s:GradientEntry color="0xf0f0f0" ratio="1" />
     </s:LinearGradient>
    </s:fill>
    <s:stroke>
     <s:SolidColorStroke color="0xc0c0c0" weight="1"/>
    </s:stroke>
   </s:Rect>
   
  </s:Skin>
  

  When displaying a couple class MyComponent instantiated in a s:TileGroup as follows;

  <s:TileGroup width="940" verticalGap="20" horizontalGap="20" clipAndEnableScrolling="true">
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
   <components:MyComponent currentState="{theState}" />
  </s:TileGroup>
  

  and saw two buttons to switch the value of the 'State' to 'Normal' or 'photo', it resizes the component properly to the small size, but that goes back to the smaller size to the largest size, it does not play the transition. It just makes small to large immediately.

  The strange thing is, however, that if I use a tag < s:HGroup > instead of < s:TileGroup > it works like a charm, so I guess that's not so much the custom component or skin that is causing problems.

  When I put the transition of the size of the component itself instead of in her skin, then it works as expected, but I think that transitions should be defined in the skin and not in the component itself, right?

  I do something wrong or didn't I just encountered a bug maybe?

  It took me a while to realize it was.  TileLayout organises its elements in a grid of 'cells' and each cell is the same size (the size of the largest component).  Then, each element is placed in its own cell because the horizontalAlign/verticalAlign properties.  By default, TileLayout a horizontalAlign = justify which means that extends the element to the size of the cell.  In order to have an effect of resizing plays on the skin of the element does not really have any effect.  He gets to work when the shrinkage, but fails more and larger, I guess because the increase in the width of an element affects all cells, while the lower has not.

  So I think the right thing to do here is to either wrap a group around the Rect and mentioned target that you like, or the TileGroup.horizontalAlign left/center/right value.

  Here's a simplified example of how you can reproduce it:

  
  http://ns.Adobe.com/MXML/2009.
  xmlns:s = "library://ns.adobe.com/flex/spark" >
     
          [Bindable] public var test: Boolean = true;
  ]]>
     
     
     
         
             
                 
                     
                     
                     
                     
                 
                 
                 
                     
                         
                     
                     
                         
                     

  
                 
                 
                 
                     
                 
             
         
     
     
     
         
     
     
     
         
     
     
     
         
         
     
     
     
         
         
     
     
     
         
         
     
     
  

  If you wish, you can ask about a bug, but I have the feeling that we would not be can not fix because probably you shouldn't use horizontalAlign = justify and change the width of the element at the same time.

• Starting problem with the gray screen on iMac

  Hello everyone

  I'm a bit puzzled with a problem I'm having with my iMac 27 "a model late 2009, bought in early 2010, I had built at the time with 8 GB ram, 2 TB HD and fastest i7 Quad core processor available at the time.

  I'm running El Capitan, and all wise OS is perfectly up to date.

  The other week, after a systematic restart, I have a gray screen and little else.  Another reboot and everything was "normal", so I did not concern me unduly.

  Today, after that the Mac had been idle for a time during a call, the screen fell asleep as usual (I do not SLEEP the computer itself), but during his return and touch the SPACEBAR and key "ESC", the screen remains black.

  So I made a forced shutdown and restart.

  I get the screen gray and normal startup (no other sounds) chime followed by the apple logo and the startup progress bar.  He gets to halfway through the long, and then instead of bring to the top of the login page, it's just going to a gray screen Uni.

  So I restarted in safe mode, OK and ran disk utility a couple of times - at the first crossing, he noted, there a problem with the map of partition which can cause problems starting, but on the second passes and the following, everything has been noted to be OK - and the SMART status of disk has been verified.

  After a reboot - the same question as above - of carillon, gray screen with the apple logo, progress bar and then just a gray screen.  I did another secure boot and re-run of disk utility, rebooted into recovery mode and run disk utility.  And again, no problems reported.

  Another reboot and the issue was always there.

  So this time I rebooted into recovery again mode and downloaded a new installation of El Capitan.

  Unfortunately, there is no set - it is always start on a gray screen after the startup chime, the apple logo and progress bar.

  I have also removed all my account account startup items and disconnected all USB devices.

  I'm a bit lost for what to do next to be honest!

  Is there anything else I can do software wise, at home, or is it time for the repair material re shop perhaps?

  Thank you very much for your words of wisdom and support

  Kind regards

  John... :-)

  John here again: :-)

  Just a quick update which may help to determine what the problem is: I restarted in safe mode, after the reinstallation of the operating system was unable to initialize properly - grey screen again.

  However, as I have a home network, I found that I can not connect on the network with my MacBook Pro to the iMac, see all my files user on the iMac and even copy them across to the MacBook Pro with no problems.

  Everything on the iMac is saved via Time Machine on a Western Digital Firewire HD 3to.

  I also have uncompressed manual 'straight' copies of my music, movies, documents folders, etc, for an old time Capsule, currently acting as a bridge to my ethernet network wireless, and provide additional backup for those critical files - my music for example is ripped 350 odd CD, all legally purchased in ALAC on iTunes on the iMac - which represents a couple of months of work... lol... no way I want to lose that!

  So I'm a bit of a loss.  Disk utility reported no problem with the drive... I can boot into safe mode and recovery, but normal mode 'mode '... I always get the chime, the screen with apple logo and progress of the gray bar, then goes to just a gray screen instead of the login page.

  Help!

  My beloved Einstein had a hiccup!

  All comments appreciated and thanks again - hope this extra info helps

  Kind regards

  John... :-)

• Tablet in the form of progress bar during the return from sleep mode

  When I start my iMac mode 'sleep', it takes forever to load initially. When lights up the screen, this pill in the form of loader/progress bar appears on the display of connection with all inactive until it ends. When it is finished, I am able to connect successfully. I also got the gray screen of death twice now, assuming it's related.

  I wiped the computer and reinstalled the operating system last night and already the problem persists. No matter which other experienceing this issue or know a solution?

  Thank you.

  Mac computers: progress bar appears after waking from sleep - Apple Support

• Global variable in the progress bar

  I have an existing labview code that consists of a main vi, which is the GUI user, and several (about 70) under vi. I am trying to add a progress bar on the screen before (user GUI) which will be immediately after it hits certain sections of code. I write this using a global variable to store the value of the status and any attempt in the main on-screen progress bar after each increment. Is there a way to link the main progress bar value to the global variable so that it updates as soon as the value is incremented? The problem that I am facing is that when I update the global variable in a Subvi, the progress bar takes the value of the Sub - VI is finished, all the numbers to jump between the two. I know it's because I do not correctly write to the progress bar, but I don't know how to do. If this isn't a good method, are there any suggestions?

  For example:

  SubVi2 SubVi1 Vi main

  (1-4)                (5-8)             (8-12)

  Progress bar: 1 2 3 4 8 12

  (I tried the Progress Bar Library OR offer, but I need a progress bar on the front panel, not a sound upward, so I can debug for code execution)

  Thank you - Adam

  I would go with a motor of Action update the progress bar VIA referance Server vi.  Here is an example of the use of a side effect I have to make this kind of progress bar.

  If you have not read Ben nugget of action engine, it should be mandatory, you can find here

  By building a "resource module" (a special AE that keeps a referance to the resource to act on) after initializint EI, you can call any 'method' on the resorce from anywhere in the instance of the application.  These babys really allow you to do interesting things to the GUI from around where the real action takes place.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• help with the new option of memories

  Sorry for my English

  Please help me with the new option of memories

  no memories option appears me

  I have an iphone with IOS 10.02 5

  Hello

  Try this support article > enjoy your memories in pictures - Apple Support

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  Why did you start a new post? Post again only after only 8 minutes accomplished nothing.

  There is no general problem going to EL Capitan on your Mac.

  Some applications may require updating.

  Some devices like printer may require the updated drivers. For some readers of devices not being updated are available.

  This is the Office Mac Pro forum. I asked that your post be moved to the El Capitanforum or another appropriate forum.

  Please move to the EL Capitan forum or another appropriate forum. Thank you