WITH video card driver, windows freezes after 10 seconds after the Welcome screen, WITHOUT a driver, it works fine

Similar Questions

• Satellite P850 take about 4 minutes to start Windows after the Welcome screen

  Hey

  My SATELLITE P850 take some time after the Welcome screen to start windows, it was like this the first time that I get it.

  Any help or idea?

  thx a lot

  Have you changed anything in your system or maybe the HARD drive? Did you create a partition?
  4 min to complete the startup process is really long
  Have you installed an antivirus software? Maybe a Norton Antivirus?
  I got this software installed on my laptop and it took an eternity to boot the system.
  I replaced Norton Antivirus with free ware software called Avast!.
  Now the Windows starts for 30 sec

• How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

  March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

  Hello

  If you think the update caused the blue screen then uninstall it to check.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ==============================================================

  If not, remove the updates help then we can troubleshoot the BlueScreens.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Windows 7 is hung up on the Welcome screen after deferred journal

  My problem is similar to what in the http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-hangs-up-at-the-welcome-screen/144a1b42-3b5d-4cf0-b66f-d6c063768b44 except when I connect normally, it does not occur.  It is only if I turn on the computer, go away and come back some time later (say 15 minutes) and then enter the password to connect, it hangs at the Welcome screen.

  Hi Frank,.

  -For how long have you been faced with this problem?

  -Have there been recent changes or updates made on your computer?

  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.
  
  Step 1.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  Step 2.
  You can try a method clean clean boot to find out which application is causing the problem.
  Clean clean boot.
  a. Click Start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  b. on the general tab, click Selective startup.
  c. under Selective startup, click to clear the load startup items.
  d. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  e. click OK.
  f. When you are prompted, click on restart.
  g. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Also, you will need to uninstall and reinstall the software problem on your computer.
  
  Reset the computer to start as usual
   
  a. When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  b. Click Start, type msconfig.exe in the start search box and press ENTER.
  c. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  d. When you are prompted to restart the computer, click on restart.
   
  It will be useful.

• Windows 7 does not start after the Welcome screen after password

  I've been running Windows 7 for the last 10 months with no problems until a few days ago. The PC starts fine, goes to the password screen, accept the password and then adheres to the Welcome screen.  The PC is not frozen, the cursor moves and the circle just keeps running load.  It starts perfectly in safe mode and safe mode with network.  This problem started to occur intermittently, but tonight, it took 4 re - begins to initialize.

  Would be grateful for any ideas.

  Hello
  
  a. did you software/hardware changes to your computer before this problem?
   
  Step 1: Try to perform the clean boot in safe mode and check. This is perhaps due to some third party software installed on your computer.
  Reference: http://support.microsoft.com/kb/929135
   
  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
  Measures to check the application event log:
  a. Click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows 8 does not not to the Welcome screen and the start option advanced

  I met a very strange situation.

  1. I first put my system into hibernation and walked away for a while. Then when I tried to turn on the system, it freezes at the Welcome screen. I tried the strok key (Ctrl + Alt + Delete) but nothing happened. I noticed that the ' FN ' on my laptop works very well! I could turn on and turn off the Wifi with them. But the system has not responded to all other keys and my touch pad.

  2. I tried waiting for the system to respond for a long time. When I noticed that the little light on my laptop showing the status of the HDD stopped flashing, I thought that the system could already went wrong so I hard reboot the system.

  3 then, strange thing that happened:

  (1) first is the logo of my BIOS flashed on the screen and disappeared, which has never happened before.

  (2) then the system told me that he prepares the update. But I remember turning off the automatic update and I had not installed update before the system went wrong. Although I remembered that there is a warning to the login screen that there is some new important updates and I should install them.

  (3) the system is restarted automatically when the increase is 30%. After this reboot, the system maintains hang at as before welcome screen.

  4. I've tried several things and hard reset for many times but nothing has changed.

  (1) I tried to disable the quick start to the BIOS.

  (2) I've tried allowing CSM (disable UEFI in legacy mode)

  (3) I tried to press F9 to start and got into the advanced boot options screen. However, all there hang two! My keyboard and mouse are both inadmissible.

  (4) disconnect all connected to my laptop.

  Then I'm lost. I can't repair or restore my system. I think that my keyboard works fine because I can change the BIOS setting to use. Now, I'm at my wits end with. Can anyone suggest anything?

  Update:

  Turned history that I tried to plug my USB mouse to the laptop. It worked, and when I connect my USB keyboard that works too! But minutes after I logged on successfully to Windows, I got the WORKER_INVALID and restart the system.

  I found this post which has almost exactly the same problem with me (I use an ASUS laptop too!). So I uninstalled my driver warned of the gesture, and then the system has not crashed over.

  But my problem has not been resolved. I downloaded and installed the latest driver of ASUS and always found my touch pad and the keyboard does not. I also realize that even in a different operating system on my system (LinuxMint), my touchpad and keyboard will not work.

  To summarize:

  Now I can use an external device (USB keyboard and mouse). But the built in keyboard and touch pad does not work. The latest driver for ASUS (ASUS Smart gesture) and ASUS ATK Package driver does not work. Strange thing is that when I open the computer, can I use my keyboard and even type in the Linux grub shell. But once the system got loaded, both in Windows and LinuxMint, the keyboard and the touchpad don't work.

  Now, I suspect my BIOS went wrong, but I do not know and do not dare update the BIOS so recklessly. Any ideas?

  Hello

  Thank you for the update on the question and good to hear that your problem is solved and everything works well after the replacement of the motherboard from ASUS. This information will help other members of the community to the same question.

  Feel free to post on the forum if you have any concerns more associated with Windows. We will be happy to help you.

  Kind regards

• Video card issues 'Windows cannot read this disk. The disc is maybe damaged or it could be in a form that is not compatible with Windows.

  Original title: card video questions

  My company adds two monitors to existing systems that are also running good XP and windows 7. Everything goes smoothly with the exception of one system using windows XP. I replaced the original video card (ATI DELL X 1300 128 MB VIDEO CARD in the PCI-E DVI TV-OUT) with nvidia GeForce 8400 GS and when I try to install the drivers through the disk, I get the following message: "Windows cannot read this disk. The disc's might be corrupted or it could be in a form that is not compatible with Windows. I flashed the BIOS, but still nothing. Do I need a different video card?

  Hi TheRealBradB,

  ·         The computer is on a domain network?

  You can download and install the drivers from the nVidia GeForce 8400 GS video card for site.

  GeForce 8400 GS video card

  http://www.nvidia.com/page/GeForce8.html

  You can run the Autodetect your GPU and check the drivers.

  Also contact nVidia support for help on the issue.

  NVidia support

  http://www.nvidia.com/page/support.html

   

  Hope this information is useful.

• Black screen after the Welcome screen

  About 2 weeks ago, my wife had the icons on the home screen turn into white shadows and then the next start the computer it started properly (I guess), but once he spent the home screen to his profile (desktop) the screen went black. The mouse pointer is still on the screen and can be moved, but there is no bottom. If you Ctrl-alt-del the good screen comes up with the correct graphics. I tried to restore to an earlier date without result. She said that there was an update to adobe that it can ar may not have executed before the problem. I also tried last good configuration known without help. If I boot in the Safemode with networking, I have a black background, but the desktop icons are restored to normal. Don't want to run in safe mode for always. The ulitimate in Vista is an upgrade and not the version full and will not fix the problem.

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot connect to Windows 7, no password prompt on the Welcome screen

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/no-prompt-box-on-welcome-screen-asking-for/cf1e0543-1547-E011-90B6-1cc1de79d2e2

  Hello I have kinda the same problem as above:
  -> Win 7 Pro
  -> Boots of emissions 'Press ctrl + alt + del' screen
  -> When this is pressed, the prompt for the password is not displayed
  -> Impossible to recover from cd

  After working with this problem for some time, I found that when computer shuts properly, the next log does not display the password prompt.  If the computer is turned off via a second 5 press power button, the password prompt is displayed the next time the computer is turned on.

  I had an old image of the operating system on a hard drive (HD replaced with solid state) that I used to "restore".  The question that has happened again a few days late.  I can't keep backup/restore all the time because it is very tedious (there are a lot of changing data on this computer a duty to back up like that all the time isn't a realistic solution)

  It can be the cause of this problem? I want to solve this problem without having to recreate the image and restore new data. Any help or advice is greatly appreciated.

  Hello

  Were there any recent changes or updates made on the computer?

  Step 1:

  Try restarting your computer in safe mode and check if the problem persists.

  a. restart your computer.

  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Advanced Startup Options.

  c. using the arrow keys, select the Safe Mode option.

  d. press the Enter key on your keyboard to start Windows Safe Mode.

  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows goes into safe mode.

  f. check if you still have the problem.

  If it works fine in safe mode try performing a clean boot in order to find the cause root.

  Step 2:

  See the article about how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: when the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:

  I suggest you to activate the administrator build-in account and check.
  a. click Startand type cmd in the Search boxof start.
  b. in the list of search results, right click Guest and then click run as administrator.
  c. When you are prompted by user account control, click continue.
  d. at the command prompt, type net user administrator / Active: Yesand then press ENTER.
  e. type net user administrator , , and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.

  f. type exitand press ENTER.

  g. disconnect from the current user account.

  Let us know if it helps.

• Windows XP place locks upwards at the Welcome screen.

  Old hard drive, different computer

  Hello!  I am trying to help a friend get a small achievable tablet to take with him to the chemo.  I was not able to enter the original hard drive because of password protection, so I installed an old hard drive to a laptop, I used to have in it.  I reinstalled the XP operating system since the DVD provided with the original computer and now it won't let me past the opening screen.  He repeats to me there was a problem with the activation of Windows, and when I click Activate, it says Windows is already activated.  I would like to get fixed for my friend before his next turn.  Very small pieces would be appreciated!

  Old hard drive HP ZE4900, just trying to make it work in a Toshiba M200 tablet.

  As long as you have used the product key for Toshiba XP and media during the installation, you should be able to activate"

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Windows Vista Home Basic stuck on the Welcome screen

  After Windows update seveal weeks, Vista Home Basic running on Dell Inspiron laptop was stuck on welcome screen - "circle of death".  Was able to boot into Safe mode and do a system restore.  After another update of three days there are similar problems.  System Restore (seveal points) tried going back beyond the date of the update did not work; Clean boot didn't work; Startup Repair does not work; Computer repair from the Vista installation disc did not work.  Of options other than reforamatting and reinstalling everything?

  Hello

  Boot safe - control panel - Windows Updates - upper left - settings - set updates to download
  but notice you. Then, bottom left - Installed Updates - uninstall the updates could have triggered
  the question - Reboot.

  If no joy then try these.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  From the COMMAND prompt from a floppy boot or the Recovery Console/environment (if you have) run these:

  Chkdsk /f /r

  RESET

  sfc/scannow

  RESET

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  And if necessary check here:

  Manufacturer diagnostic utilities - run for the manufacturer of your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
  Trial versions of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• InDesign crashes after the Welcome screen appears

  My InDesign CC had an update yesterday. Since when I run it now it crashes on the homescreen, I had turned it off before somehow in the contents of the package, but the update caused, he appears again, causing the program to freeze and make me force restart the computer with the power button. There is no option to stop even appear in the preferences. This happened with Photoshop and Illustrator before too. I have a screenshot of what looks like the home screen; Somehow, he goes all blurry and stained so I can't select something to say "don't show this again". I can not find any topic on this solution as it kept coming up with Photoshop. I use an iMac 20 inch Late 2006 OS X Lion (which is pretty slow!) with a 2 GB SDRAM. Tried contacting Adobe via chat but they do not have anyone to help me. Here is the image:

  

  I now have this sort, Adobe rang back me and helped me via remote access. They have deleted a file in the contents of the package (I thought to do this, but didn't know where to go or what to remove, think it was called "What's New" or something) and it works fine now. They told me NOT to update InDesign for a while until they know it will work ok once, do not want the same thing happens everywhere!

  Happened the first time when I got so InDesign CC, which was strange, but the update does happen!

  Thanks for your help, guys!

• After the Welcome screen update no longer appears

  After the upgrade to Dreamweaver CC 13.1, I now receive this error instead of the home screen each time I have started with Dreamweaver:

  File not found

  Dreamweaver could not find the file

  "file://Macintosh%HD/Applications/Adobe/%20Dreamweaver%20CC/Configurat ion/Content/Welcome/Flash/start_content.html" to load

  ERR_FILE_NOT_FOUND

  I traced the path to confirm that the file exists, and it does. I saw that someone had the same problem, but for some reason, this discussion has been locked until the solution was revealed. Please notify. Thank you.

  Hi ttrusty,

  We are aware of this problem and have a work around for this

  Check out http://forums.adobe.com/docs/DOC-3771

• Blank (black) screen with the cursor of the mouse after the Welcome screen

  I have search through forums and I see a lot of people is having this problem too, XP and Win7 users included, but it seems that more people is having this problem on Vista. None of the solutions have solved my problem, however. It does not show the option "Start Task Manager" when I press Ctrl + Alt + Delete. I tried to start safe mode, it is always the same. Since I was using OEM Acer, I don't have the Vista installation disc. My sister was having this problem on his Toshiba laptop too, but fixed because it was sent to Toshiba service. On the forums, some say it is a malware, some say that it happened after some update but I don't update or download anything yesterday. There looks like a major problem nowadays, please help us solve this problem!

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.