Black screen after the Welcome screen

Similar Questions

• Satellite P850 take about 4 minutes to start Windows after the Welcome screen

  Hey

  My SATELLITE P850 take some time after the Welcome screen to start windows, it was like this the first time that I get it.

  Any help or idea?

  thx a lot

  Have you changed anything in your system or maybe the HARD drive? Did you create a partition?
  4 min to complete the startup process is really long
  Have you installed an antivirus software? Maybe a Norton Antivirus?
  I got this software installed on my laptop and it took an eternity to boot the system.
  I replaced Norton Antivirus with free ware software called Avast!.
  Now the Windows starts for 30 sec

• How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

  March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

  Hello

  If you think the update caused the blue screen then uninstall it to check.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ==============================================================

  If not, remove the updates help then we can troubleshoot the BlueScreens.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• In the library panel, pictures of miniatures become black one after the other

  Hello

  Last month, in the library panel, pictures of miniatures become black one after the other, and then they all black!

  I don't know how to recover the thumbnails.

  And in the develop module, the photo is very dark, until I click on your car.

  Thanks for helping me Olivier.

  Version of Lightroom: 6.2.1 [1046594]

  License: Permanent

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  The system architecture: x 64

  Number of logical CPUs: 4

  Processor speed: 2.9 Ghz

  Built-in memory: 6143,1 MB

  Memory real available pour Lightroom: 6143,1 MB

  Real memory used by Lightroom: 900,6 MB (14.6%)

  Virtual memory used by Lightroom: 1032,1 MB

  Size of the memory cache: 399.2 MB

  Maximum number of links used by Camera Raw: 4

  SIMD optimization of Camera Raw: SSE2

  The system DPI setting: 96 DPI

  Composition on the Desktop enabled: Yes

  Views: 1) 1920 x 1080, 2) 1280 x 1024

  Input types: multipoint touch: no, touch integrated: no, built-in pen: no, touch external: no, External plume: no, keyboard: no

  Parents to the graphic processor information:

  AMD Radeon HD 5800 series

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13399 context 15.201.1151.0 the base profile

  Renderer: AMD Radeon HD 5800 series

  LanguageVersion: 4.40

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Access to the library path: D:\Photos\_LightRoom\Lightroom\Lightroom Catalog.lrcat

  Settings file: C:\Users\Olivier\AppData\Roaming\Adobe\Lightroom

  Installed modules:

  (1) Facebook

  (2) Flickr

  (3) external module connected mode Canon shooting

  (4) external module connected mode Leica shooting

  (5) external module of shooting in connected mode Nikon

  Markers Config.lua: no

  Adapter n ° 1: supplier: 1002

  Device: 689e

  Subsystem: e177174b

  Revision: 0

  Video memory: 1012

  Adapter n ° 2: provider: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (High Definition Audio device)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: LR5x102

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  HiLolivGr1

  Please refer to this thread images regarding the black squares

  Concerning

  Assani

• Blank (black) screen with the cursor of the mouse after the Welcome screen

  I have search through forums and I see a lot of people is having this problem too, XP and Win7 users included, but it seems that more people is having this problem on Vista. None of the solutions have solved my problem, however. It does not show the option "Start Task Manager" when I press Ctrl + Alt + Delete. I tried to start safe mode, it is always the same. Since I was using OEM Acer, I don't have the Vista installation disc. My sister was having this problem on his Toshiba laptop too, but fixed because it was sent to Toshiba service. On the forums, some say it is a malware, some say that it happened after some update but I don't update or download anything yesterday. There looks like a major problem nowadays, please help us solve this problem!

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HP Envy 15 black laptop after the login screen.

  The laptop was working OK up to now just get a black screen after login. I can hit Ctrl alt del, but nothing happens

  Hello

  Try the following - this implies that you are under Windows 8/8.1.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Pick a point to restore at least 48 hours before that this problem occurred first and then proceed with the system restore.

  Kind regards

  DP - K

• Windows 7 does not start after the Welcome screen after password

  I've been running Windows 7 for the last 10 months with no problems until a few days ago. The PC starts fine, goes to the password screen, accept the password and then adheres to the Welcome screen.  The PC is not frozen, the cursor moves and the circle just keeps running load.  It starts perfectly in safe mode and safe mode with network.  This problem started to occur intermittently, but tonight, it took 4 re - begins to initialize.

  Would be grateful for any ideas.

  Hello
  
  a. did you software/hardware changes to your computer before this problem?
   
  Step 1: Try to perform the clean boot in safe mode and check. This is perhaps due to some third party software installed on your computer.
  Reference: http://support.microsoft.com/kb/929135
   
  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
  Measures to check the application event log:
  a. Click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• WITH video card driver, windows freezes after 10 seconds after the Welcome screen, WITHOUT a driver, it works fine

  Hi guys,.

  I recently had the problem that when I start my computer, it freezes after 10 seconds when I saw the Welcome screen.
  I'm in safe mode, it works perfectly fine. I have uninstall ALL my Nvidia drivers and then restart the computer in normal mode, and then everything works fine. I go to the Nvidia website again, download the latest drivers and the same freezing problem happens again. I also tried with older drivers provided by Nvidia, still the same problem.
  Completely, I formatted my HDD and reinstalled Windows 7. I install drivers Nvidia and the same problem again.
  I have a Nvidia Geforce 250GTS
  The processor is Intel Duo Core converted E6850 (boxed)
  4 GB of Ram DDR2 Ram
  East of card mother ASRock G31M-S

  Everyone knows that the problem is?
  Thanks in advance and sorry for my bad English, I tried my best :)

  Hello.

  The video card drivers enable the features of the card to use.  When in safe mode or with no driver installed only the basic functions of the card are used.  If the card is faulty, which is more likely, the defective part of the map has probably come into play with the full drivers installed.  This explains why it works with the Basic setting.

  See you soon.

• After the Welcome screen update no longer appears

  After the upgrade to Dreamweaver CC 13.1, I now receive this error instead of the home screen each time I have started with Dreamweaver:

  File not found

  Dreamweaver could not find the file

  "file://Macintosh%HD/Applications/Adobe/%20Dreamweaver%20CC/Configurat ion/Content/Welcome/Flash/start_content.html" to load

  ERR_FILE_NOT_FOUND

  I traced the path to confirm that the file exists, and it does. I saw that someone had the same problem, but for some reason, this discussion has been locked until the solution was revealed. Please notify. Thank you.

  Hi ttrusty,

  We are aware of this problem and have a work around for this

  Check out http://forums.adobe.com/docs/DOC-3771

• monitor blacks out after the windows xp screen__

  My xp computer starts and gets past windows xp screen.  Then it goes to a black screen and stays there. What can I do?

  I know that the machine is on because I can boot into safe mode. I scanned for viruses and found nothing.

  I reinstalled exchanged monitors, video card. Problem still exists.

  I backed up my data, then I used my windows xp cd to repair the mbr, but no difference.

  I don't have this problem with another computer connected to this monitor.

  Help!

  Hi Abbeda,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  When you start in safe mode, the display card drivers are not loaded on the computer, it is possible that the display adapter driver is corrupted.

  I suggest that you start the computer in mode Activate Video VGA and then install the latest drivers for display on the computer card and check.

  (a) remove all unnecessary devices in your computer, such as printers, scanners and removable storage devices.

  (b) restart the computer.

  (c) keep pressing the F8 key until the Windows Startup menu appears.

  (d) select enable low-resolution video (640 * 480) option and press ENTER.

  Note: in the medium Mode, your system display and desktop will look and perform differently than in Normal Mode. This is only temporary.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Illustrator 2015... Black window after the last update

  After the last update "Illustrator 2015" shows the window that contains the still open tables. This has also no open tables. Much more practice and efficae was the scene of previous versions.

  It ' a new bug or a bad choice of adobe to have this window that limits the display on the desktop even without any Illustrator open table?

  Or is it a way to harmonize systems mac os windows?

  "Framework application' is in the main menu bar in"View. " It is not a preference.

  Please read the manual on how to cinfigure workspace.

  https://helpx.Adobe.com/Illustrator/using/workspace-basics.html

  Illustrator help | Characteristics of the Illustrator workspace

  New:

  New analytical features to Illustrator

• Strange black gap after the title screen

  Hello

  I have a simple screen with a LabelField I put as a title. After that, I add a SeperatorField to the screen. Since I use a color different than black for the background of my title field, I can see a black area about 5 pixels between where ends the title field and the field separator. This happen when running with OS 4.6.

  When you run the same code on a simulator with OS 4.5, there is no such black gap.

  Someone has seen this before and may know a work around? I already tried all possible settings as a zero margin and margin inner but not luck so far.

  Thank you.

  Daniel

  The default title bar some theme related problem. I don't think that you can customize the default title bar.

  Try something like this instead of using the setTitle() method:

  import net.rim.device.api.ui.*;import net.rim.device.api.ui.component.*;import net.rim.device.api.ui.container.*;import net.rim.device.api.system.*;
  
  class TestScreen extends MainScreen{    private HorizontalFieldManager titleManager;    private VerticalFieldManager mainManager;
  
      TestScreen()     {            super(NO_VERTICAL_SCROLL);
  
          /////////////////START OF TITLE///////////////////        LabelField titleLabel = new LabelField("Title Text");                
  
          titleManager = new HorizontalFieldManager()         {            protected void paintBackground(Graphics graphics)             {                graphics.setBackgroundColor(0x00dddcdd);                graphics.clear();                super.paint(graphics);            }        };        titleManager.add(titleLabel);        ////////////////////END OF TITLE///////////
  
          /////////////////START OF MAIN MANAGER////////         //rather than  adding component in the mainScreen        //add components in this verticalManager and then        //add this manager to mainScreen         mainManager = new VerticalFieldManager(Manager.VERTICAL_SCROLL | Manager.VERTICAL_SCROLLBAR)        {            protected void paintBackground(Graphics graphics)             {                graphics.setBackgroundColor(0x00000000);                graphics.clear();                super.paint(graphics);            }                        protected void sublayout( int maxWidth, int maxHeight )            {                int width = Display.getWidth();                int height = Display.getHeight() - titleManager.getPreferredHeight();
  
                  super.sublayout( width, height);                setExtent( width, height);            }        };        ButtonField btnTest = new ButtonField("Test Button");        mainManager.add(btnTest);        /////////////////END OF MAIN MANAGER/////////////// 
  
          this.add(titleManager);        this.add(mainManager);
  
      }}
  

  Concerning

  Bika

• InDesign crashes after the Welcome screen appears

  My InDesign CC had an update yesterday. Since when I run it now it crashes on the homescreen, I had turned it off before somehow in the contents of the package, but the update caused, he appears again, causing the program to freeze and make me force restart the computer with the power button. There is no option to stop even appear in the preferences. This happened with Photoshop and Illustrator before too. I have a screenshot of what looks like the home screen; Somehow, he goes all blurry and stained so I can't select something to say "don't show this again". I can not find any topic on this solution as it kept coming up with Photoshop. I use an iMac 20 inch Late 2006 OS X Lion (which is pretty slow!) with a 2 GB SDRAM. Tried contacting Adobe via chat but they do not have anyone to help me. Here is the image:

  

  I now have this sort, Adobe rang back me and helped me via remote access. They have deleted a file in the contents of the package (I thought to do this, but didn't know where to go or what to remove, think it was called "What's New" or something) and it works fine now. They told me NOT to update InDesign for a while until they know it will work ok once, do not want the same thing happens everywhere!

  Happened the first time when I got so InDesign CC, which was strange, but the update does happen!

  Thanks for your help, guys!

• Does not start after the welcome except in safe mode screen

  The only way I can get into my hard drive is to start in safe mode.  I have run the disk permissions, repairing the disk booted recovery and reisntalled Mavericks, but nothing that it seems to do, will fix the problem.  I use an iMac mid-2010, Mavericks - 10.9.5 processor is 302 GHz intel core I3 and 4 GB of memory, 1333 MHz DDR3.  I have a return of my machine of time from 2013, should I try that or eliminating what I have now?  Can I backup my data to Time Machine now, while in safe mode?  Please advise, I am suffering from withdrawel =)

  Chances are you have 3rd party software installed that will not be booted without failure.

  Use EtreCheck to get a list of all the 3rd party software.  If you like you can post the result here and someone will probably see what could be causing your problems.

  <https://discussions.apple.com/docs/DOC-6174>

  <http://etrecheck.com>

  

• After the welcome, the screen goes blank with the pointer of the mouse only.

  little time later virus scan comes up, by clicking on the close X Open IE to their web site, giving me access to the internet. Some time the error message later "host process for windows services stopped working and was closed". Occationally œuvres "error loading c:\windows\system 32\newdev.dll dynamic library initialization routine links (DLL) failed" safe mode. Tried windows recovery of F8 boot minimum, sfc/scannow, chkdsk/f/r, windows recovery disk, fix software reg, norton 360. Can open my computer browser, tried to run solitaire open saved the game box, but no other graphics. Reduced browser windows appear at the bottom of the desktop. Running vista Home premium service pack 2 on toshiba satellite L355-57902

  Given that safe mode works, start in safe mode and do a system restore to a restore point before the show.

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Note: If the system is infected with the virus, the system restore would NOT remove the virus.

  What resulted sfc/scannow? He did a report errors?

  Registry patches are false and I advise anyone using these cleansers to stay away from them.

  Have you had the chance to do a safe mode virus scan?

  Try ESET (http://www.eset.com/online-scanner) or a virus scan online Kaspersky (http://www.kaspersky.com/virusscanner).

  Download Malwarebytes anti-malware and scan your computer (from safe mode with network that is):

  http://www.Malwarebytes.org/

  Finally, do a repair installation:

  Vista - repair for Vista installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Back up all your data and do a clean install, if you feel that your computer be compromised anyway.

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.