ProBook 450: 450 ProBook G0 does not start

Similar Questions

• 4540 proBook s does not start after stopping

  Brand new Probook s 4540, B7A48EA #BED, of the box. Memory 4 GB DDR3, 500 GB, processor i3, SUSE Linux disk.

  I have install the battery, connect the power supply and turn on laptop. Linux installation started, got the message 'creating recovery root tarball' and wait, wait and wait with the same message of Linux. I rebooted the laptop and after that got Linux message 'Cannot find size info part of recovery' and restarted itself, every 120 seconds.

  I turned it off, by pressing the power button / stop 5 sec.

  After that, I can't turn on laptop. When I press the power button / stop, power, drive, browser and Flash of LED wireless, you can hear disc trying to turn but fail and all the lights go out and about 2 seconds later all lights flash once again, drive tries to spin but fail again and laptop does not start.

  I have 'power reset', updated the BIOS (F.40), removed the drive and DVD drives, tried without battery but no change in behavior. I returned the drive and the original DVD. After removing the memory, portable lights, as if, and caps lock flashing of LED 3 times which means error memory. After that, I did a "reset power" once again, reinstall memory and try to start the laptop. After pressing the power button / stop at the beginning I had same symptoms I described, and after 2 portable seconds began. I installed Windows 7 Pro. Laptop computer can be restarted Windows, but after stopping, he can't press start button to start / stop.

  One way to start is to move the memory in the other slot, but it cannot start after his stop. After his return in the first memory location can be started again until the next stop. And when start, does not start from the beginning, but after 2 seconds, for his second try. The BIOS memory test, the EFI system diagnostic and memtest86 has errors. I tried with different memory module but got the same symptoms.

  Should I change a motherboard?

  After replacing the motherboard (systemboard), everything works.

• Recovery partition is there but does not start Recovery

  Hello
  
  When you try to restore the image (F11 at startup), the laptop seems to be as he tries to start missing Windows installation (Windows Boot Manager error page).
  
  Partitions 'SYSTEM', 'HP_RECOVERY' and 'HP_TOOLS' have not been affected. Recovery files of ~ 15 GB are still there!
  
  The Windows (2nd primary) partition was deleted and then recreated as an NTFS partition. Since then, the recovery process does not start.

  How can I restore my intact HP_RECOVERY partition system without using recovery DVD? (I can't access right now.)
  
  The partition Windows has need of a specific disk label? What is the magic that breaks the recovery when an NTFS partition is all simply deleted and then re-created?
  
  Peter

  HP ProBook 6550 b (WD701EA #ABD)

  Solution: How to fix F11 penetrates is not in the Recovery Manager process

  You will need:

  -This fix by HP: difficulty to the Multi-partition HP Recovery Manager (the ProBook 6550 b is not listed as a supported model, but it worked for me)

  -installation of Windows (see partial solution above) a job to install the fix on your ProBook

  or

  -sufficient knowledge to extract the winre.wim missing the fix above, copy it to your recovery partition and to apply any measures necessary (I did this)

  Steps to follow:

  -in your work on your ProBook Windows installation open the file downloaded "sp48415.exe".

  -the files will be extracted in "C:\swsetup\SP48415", open this folder in Explorer

  -Right click on "F11SPFix.cmd" and run as administrator

  -the patch will be applied

  Restart und press F11 at startup to enter your recovery Manager (hopefully) fixed.

  Credits to HP support.

• HPE-510 t does not start with AMD over-pants W5000 (Windows 8.1)

  I just bought an AMD over-pants W5000 (TDP = 75 W) to replace my nVidia Quadro 600 (= 40 W TDP) in my 2011 HPE-510 t (i7-2600, 12 GB of RAM). Dell U2913WM monitor.

  My machine does not start with the new inserted card. I upgraded a 450 W Antec VP450F 300W stock power, but that has not changed the start situation. I tried DisplayPort and Dual-Link DVI - D.

  Someone at - he was able to get the AMD over-pants working in an office of this generation HP?

  Thank you

  Mike

  Hello

  Open RUN (win + x key) and enter: MSINFO32

  What level of your PC BIOS runs?

  If you can not enter the BIOS at startup so be sure that your keyboard is plugged into a USB 2 port.  Otherwise some time in Windows 8 go to Advanced Options.  See the image below.

  

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• iPhone hot 5s fees and does not start

  phone is connected to the load.  After a while I checked it and it was very hot.  I unplugged it and now it does not start.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data.

  More troubleshooting can be found in this article:

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• MacBook Pro does not start

  I have tried several things but the laptop won't start do not. Power cable showing green light as if the laptop is fully charged. It's like the death does not start.

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  You said "It's like death does not start."

  Does this mean that he shows no signs of life? Indicator light power?

  Hear the carillon?

  Hear the fans?

• The FireFox 42.0.1 application does not start.

  The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
  I had to use IE 10 to contact Mozilla.
  Year annual should be ashamed of this...
  Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
  In addition, why FireFox 42.0.1 install when I try to install 37.0.2?

  It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Firefox does not start, the Profile Manager is not available

  Firefox worked, then update it does not start. I tried all the fixes; However, the Profile Manager is not accessible or even present in the execution file. I unintalled and reinstalled several times, but I still can't get it to work. There is no Windows or Norton firewall block so I do not understand. What can I do? I want to use Firefox because it's the best browser; but now I'm forced to use Oscar. It's not terrible, but I prefer the features I've had with Firefox

  I had upgraded to the latest version; but the thought of demotion to the version which worked perfectly. In the end, I had to defrag, do a registry clean and optimization of performance of PC, but for the upgrade launched. So, I'm happy to say that I reply to this post with my Firefox browser. Thank you very much for your help. If all goes well, I won't have problems.
  DoubleD52

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• Firefox does not start - claims that it is already open

  Firefox does not start. He claims to be already running, but that doesn't seem to be the case.

  I tried to create a new user profile, but when I try to open Firefox now, the menu "choose user profile". I tried the new profile and they old, and both give the same error message. "Firefox is unable to use the"Default user"profile because it is in use. To continue, close the Runspace of Firefox or choose a different profile. »

  There is an entry for firefox.exe in the menu of "details" to my task manager and nowhere else. When I try to put an end to this task, I get the following error: "the operation could not be performed - access denied."

  Due to some troubleshooting research, I tried to delete the parent.lock my profile folder, but I get this error: "the action cannot be completed because the file is opened in Firefox."

  I tried to transfer my bookmarks and preferences from Firefox to Chrome, but I had a similar error suggesting that Firefox was already open and I have to close first.

  I also turned off my computer and uninstalled and reinstalled Firefox several times.

  I'd really rather not lose all my bookmarks Firefox, modules, and preferences. I also prefer to use Firefox for Chrome, so if anyone can help me I would really appreciate it. I don't know what else to try.

  My PC runs Windows 10, incidentally.

  Try to delete the parent.lock file in the Firefox profile folder.

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  See:

  • http://KB.mozillazine.org/Profile_in_use
  • https://support.Mozilla.org/KB/Firefox+is+already+running+but+is+not+responding

  What security software do you have?

  Try to create a new shortcut on the desktop Firefox and maybe to reinstall Firefox via a clean reinstall (i.e. remove the Firefox program folder).

  If you cannot remove the Firefox program folder and then try to rename this file to "Mozilla Firefox.old".

  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) to see if that helps.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/
  • http://www.7tutorials.com/4-ways-boot-safe-mode-Windows-10

• FF does not start yesterday; running Linux Mint 14 in VirtualBox; updated to 39.03

  Since yesterday, Firefox does not start when I click the icon. There seems to be some activity, but the window never opens.

  I use the version of Linux Mint 14 in Virtual Box.

  In the terminal, I tried firefox-safe-mode

  I get:
  "Error: platform version ' 39.0.3 ' is not compatible with
  minVersion > = 39.0
  maxVersion < = 39.0

  I would appreciate help with this.

  PS Since I can't start Firefox data below is not the version I have the problem with.

  This is the latest information that I could find on the version of hotfix for your version of Linux:

  • http://linuxg.NET/install-Firefox-on-Linux/

  I understand that Firefox will not start, please also see these troubleshooting steps:

  • Firefox does not start - solutions