With Windows 8 Windows registry error

Similar Questions

• Spooler problem printing with Windows XP error: "error 2: the system cannot find the file specified."

  Original title: problem with Windows XP error print spooler

  My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)

  Hello

  1. What is the brand and the model number of this computer?

  This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.

  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and then restart windows.

  whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and windows restart.can any1 help me with this problem. my wireless card is qualcomm atheros AR5007 802.11b/g.my windows is windows 7 ultimate.please help with this issue.i m attaching files and dump the error image
  screenshot of error:

  http://sdrv.Ms/Nn8gDA

  memory dump file:
  http://sdrv.Ms/NiXJdJ

  Also, can you provide the latest files minidump since reinstalling the NIC driver.

• 8007371c with windows update error code. Vista Home Premium 32-bit system.

  I have Vista Home Premium 32 bit system and I have problems with windows update since early April.

  The system attempts to update 2807986 KB, 2809289, 2808735, 2820917, 2813345, 890830 (eventually successful), 2817183, 2813170 and 2823324. These will not update after many trials and the system will display an error message saying that some changes could not be completed, returning from changes, will try again on start up, do not turn off.

  On reboot, it gives the message that the updates are not configured correctly, returning changes, do not turn off. I get the 8007371c error code in the popup window windows update but can't find specific information on this code. Help please!

  Thank you.

  Fact: Applications, (Norton and McAfee) are known for do not uninstall or upgrade properly.

  Ideally, should have uninstalled the Norton application AND THEN run (b) the removal of Norton & rebooted tool FRONT (c) you have installed AVG Free and you would have BEFORE your Norton subscription had expired!

  Roll up your sleeves & cross your fingers.

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all the steps in a 1 uninterrupted session! [If a step said to restart, restart!]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. Do not TOUCH the computer until the race is over, and then restart.

  4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9 & IE7, too.

  4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop named ie8-rereg.

  4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  6. right-click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [3]

  6. double-click on the file that you saved in # 6 above & accept invites him to MERGE with the registry data.

  7 restart again.

  8. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  9. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  9 b. IMPORTANT!-online make disappear/close the pop-up window that offers the Windows Update troubleshooting tool! -then...

  9. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [4]

  10 restart once again and then run a manual check of updates & see if you manage to install all updates offered security (e.g., KB2829530, KB2847204, KB2830290 & KB2829361); Follow all the instructions.

  11. in response to this post with a status report.

  Good luck!

  =========================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, feel free to one of your other browsers reaffirm as a default if you wish.

  [3] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [4] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Dell Inspiron with Windows 7, error d3dx9_33.dll trying to play Civ 4

  I'm looking for a way to get my civ 4 game to work on my new computer is a dell inspiron 546 s with windows 7 is there a way to do this easily

  * original title - I just buying a dell insperon he has windows 7 on it and the desire to play my civ 4 game on it but get error d3dx9_33.dll is missing or not found tried reinstaalling, as he suggested same problem guard passes. *

  Have you tried the forum of civilization? Also look into compatibility mode.

  Compatibility mode - make sure to run older programs in this version of Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Learn how to use the Mode of Windows 7 compatibility with legacy applications
  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Windows registry error

  I get the message (title) "Low Windows registry space:" (Message), "the system has reached the maximum size allowed for the part of the registry system. Additional storage requests will be ignored. »

  This message does not come to the top of each thie system starts, but comes up frequently. I used a registry optimization software, but the message persists. How can I fix? The computer seems to work fine other than this error at startup.

  Read this PDF--> http://www.answersthatwork.com/Download_Area/ATW_Library/Windows_Misc/Win__16-System_has_reached_maximum_size_allowed_for_the_system_part_of_the_registry.PDF

  If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Publish with windows defender - error code 800106ba when I try to open Windows Defender

  I use windows vista sp2 32 bit op system.
  Windows Defender is set to automatic. but when I try to open windows defender, I get an error code 800106ba
  Please notify hw to enable this feature for protection.

  If you use another program (other than MSE) AV, Windows Defender may also be disabled. Examples of these other programs include but are not necessarily limited to: AVG, Kaspersky, Norton, McAfee, and Trend Micro.

  Hi the ball

  Kaspersky does not automatically turn off Windows Defender. However, it is recommended that, as usual, Windows Defender real-time protection is not enabled when Kaspersky is installed. Its a similar situation with Windows and Kaspersky firewall products that have built in firewall.

  I used Kaspersky products for several years and it has always been the case in my experience. I just tested with Kaspersky Internet Security 2012 race and I was luckily allowed to activate the protection in real time of the defenders of Windows and the Windows Firewall.

  I hope this helps.  :)

• Runtime C++ with windows Explorer error

  Hi, I have a problem with Windows Vista service pack 2 - worm 6.0.6002, build 6002,
  When I am logged on as administrator administrator do not seem to work.
  Whenever I do a right click on most of the elements, I get the following message:

  "Microsoft Visual C++ Runtime Library
  Runtime error!
  Program C:\Windows\Explorer.exe
  This application has the runtime requeted to end in a
  unusual way. »

  Then Explorer.exe resets itself and I can start over everything, even when I go to start - accessories-
  Command prompt and do a right-click, I get the same message.

  Also, when I run programs I get the following message:

  "Could not initialize component of application security. The most likely cause is problems
  with the files in the directory of the profile of your application. Please check that this directory has no read/write
  restrictions and your hard disk is not full or close to full. It is recommended that you leave the
  application and correct the problem. If you continue to use this session, you will see may be incorrect
  request behavior when you access security features. »

  This happens with HiJackThis, Firefox, Adobe Reader 9, but some programs start ok as.
  Internet Explorer and MS Word and Notepad.

  I ran AVG anti-virus, HiJackThis, Windows Defender scan, the program CBS.log.
  Western digital drive hard scan and have replaced 2005 library C++ with C++ Library 2008
  and we also tried different versions of the Explorer that were on my computer: v. 6.0.6002.18005,.
  created 18/09/2009 8:49 a and v. 6.0.6001.22298, 2008-12-12 07:39 p.

  I am confused any help will be greatly appreciated.

  For assistance with Vista SP2 issues for FREE from Microsoft Support go to the following: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problem with windows update, error Code 80072F78

  Every time when I try to update my windows it shows windows update failed and displays an error like 'Code 80072F78' code and I don't know what to do with it

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072f78-80090305-or-8009033f

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• Skype install problems with Windows 7; error 1603

  I had problems with Windows 7 and error 1603... Tried to erase all previous installations of Skype, but continue to get the message "cannot locate %appdata%\.  Error 1603 "I did a bit of research and see that 1603 is a fatal error and all the info that will make XP or 2000 operating systems. Can someone help me? Thank you d_hutch

  Maybe it helps you, too:

  http://support.Microsoft.com/kb/2258121

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• BSOD on dell 5520 with windows 7, error messages are BCCode 1A, BCCode 50,

  I'm having a problem of blue screen for my dell 5520 with windows 7 ultimate,

  the error messages are BCCode 1A, BCCode 50, please help me out of this...
  the configuration of my laptop is 750hd, 6 GB of ram with intel i5 processor 3gs...

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone".
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

• RE: problem with Windows Defender error 0x80072efd Code.

  I'm trying to update my Windows Defender and I get the error message 'Code 0x80072efd.'  Any ideas?  Oh, and he says: "the program cannot check the updates of definition."

  Hello

  You may encounter temporary connection related errors when you use Windows Update or
  Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  More details here:

  Try this, as it's the same for SP1 and SP2
  http://www.walkernews.NET/2009/05/14/how-to-fix-Windows-Update-error-80072efd-in-Vista-SP1/

  and here:

  http://trevinchow.com/blog/2006/08/09/Windows-Update-and-Error-0x80072EFD/
  And here

  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  -------------------------------------------------------------

  How to manually download the latest definitions for Windows Defender updates
  http://support.Microsoft.com/kb/923159/

  Malware Protection Center - Download the latest definitions
  https://www.Microsoft.com/security/portal/definitions/ADL.aspx?WA=wsignin1.0

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• labview 6.1 with windows system error 7

  I use vi Labview 6.1 to control an oscilloscope Tektronic and a universal pulse BNC via GPIB-USP connection generator. The vi worked very well with the windows XP system. The system was changed to Windows 7. Then the error (Trigger signal is not recognized. Check the connection between "Trigger out" and "at the ins') comes every time I started running vi. The link between "Trigger out" and "at the ins' works under mannual mode, so it's really ok.

  Compatibility between Labview 6.1 and windows 7 would be the reason? If so, are there tips for using Labview 6.1 on windows 7?  Thank you.

  Thanks for your help.

  The solution turns out to be very simple... The new Windows system is the German version so that the old windows English version.           , is used for decimal in German instead of .

  Thank you all!

• help with windows update errors and chkdsk

  I got a message saying I needed to update my windows.  I went to windows update, the express settled.  I received a message that says that I can't install the update to windows.  This is the message I received:

  The website has encountered a problem and cannot display the page you are trying to view. Take the following steps to try to resolve the problem: Refresh the page. In Internet Explorer, delete the temporary Internet files by going to the Tools menu and then Internet Options. Close and then reopen Internet Explorer.

  Then I'm defragmenting my "C" drive and I get an error with the States: Please run chkdsk /f.  I run that, once it goes through the whole process, I will return to defragment and I STILL get the same message.  I don't know how to clear these while I am able to update and to defragment my system.

  Thank you for your help

  Hello

  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive an error message "0x800A01AE" or a "0 x 080070570" error message when you try to connect to the Windows Update Web page or to the Microsoft Update Web page in Windows Server 2003 or Windows XP

  http://support.Microsoft.com/kb/910359

  See also:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941