Without sleep when the wireless adapter is enabled

Similar Questions

• Satellite A100-785: router restarts automatically when the wireless network card is on

  Recently,.
  Once, I turn my adapter wireless for my laptop 'ON' and it starts to connect to my router 3com officeconnect wireless.
  I found that my router restarts automatically.
  This happens each and every time I turn on my laptop with the wireless adapter ON.

  I use the Satellite A100-785 PPPoE ISP with WPA/AES encryption enabled on the new MS Vista platform.
  All drivers updated to the latest versions, and the wireless signal is Excellent.

  Any suggestions that could be the reason or any recommendation to begin to investigate the matter?
  Everything will be highly appreciated. Thank you

  Once again; Your WLan router restarts (reboots) when you turn on the WLan on the A100 Satellite Map. Am I wrong?

  Well, it's strange, but to be honest I n t see a problem with the laptop but with the router. I would recommend controlled again the unique WLan router configuration.

  Good bye

• Performance of WLan Z830 satellite falls down when the AC adapter is plugged

  Hello

  When I plug my whole wifi power cord breaks. 54 MB to 2Mb!

  In the Power Options, everything is the same as the answer key, battery with or without.

  Any ideas?

  My camera is a

  My laptop:
  SATELLITE Z830-10J ZB040302H

  How about WLan driver update?
  Have you tried that?

  To be honest I have never heard of such symptoms when the power adapter has been inserted
  Of course, I read on the issue when the power adapter has been removed from power saving

• Satellite L655 - questions turn on when the power adapter is unplugged

  Hello

  I have a problem with my new Satellite L655. When the power adapter is disconnected and wireless is disabled, the laptop can turn on for less than a second turn it off again. OR turn 'power' and 'Wireless' turns on, but black screen and hd light; After startup bios of 30-40 seconds, the wireless light turns off and hd lights; OR turn on normally;

  Toshiba has changed the motherboard a few days ago, but the problem persists. Update BIOS. My laptop is the only one affected

  Thank you in advance,
  Maurizio.

  Hey Buddy,

  > Toshiba has changed the motherboard a few days ago, but the problem persists
  So have you contacted already technicians again? You must tell them that the problem is still not resolved and it must be another reason for this problem. Then get in touch with technicians again to clarify this issue.

  Have you connected external devices while laptop is turned off?
  -Online if yes remove each of them.

  Load default settings in the BIOS?
  -Online if it is not this. Enter in the BIOS, and then press the F9 key to load defaults.

  Otherwise, it would be time to service as I have already written. It must be a nuisance material

• Re: Unable to get the wireless adapter to work on my Satellite L550-1CC

  I'm getting bored with this laptop, I reinstalled windows 7 (32 bit) and can not get the wireless adapter to work.

  My router settings are perfect, my netbook is zero connection problems - the router is just inches away from the laptop most of the time - the laptop insists that there is "no available networks."

  This of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.

  Windows automatically installed the wireless network - I thought that could be the problem, so I downloaded the realtek driver directly.

  No difference. Always the small icon with Red Cross barred through it.

  I thought it could have been a hot key problem - so I installed the flash card driver that apparently controls the access keys (for some reason any).

  Shortcut keys still don't work - I could really care about that - it's just the wireless network I need.

  Thanks for any help I receive.

  > my netbook has zero connection problems - the router is just inches away from the laptop most of the time - yet the laptop insists there is "no available networks."
  After reading this sentence, I'm a bit confused. If there is no available WLAN networks how your laptop had zero problems to connect?

  One last thing:
  > Of course is BS, before I reinstalled windows I could pick up 3 other neighbouring networks as well as mine.
  What is the difference between the old and the new installation of Windows?

  In general the WLAN use is fairly simple.
  Wireless network card - must be installed correctly (listed in Device Manager
  WLAN card - must be enabled using FN + F8 key combination to activate the wireless network card
  -scan the available WLAN networks area, click on the button of your WLAN and use connect
  -put key WLAN if necessary and after a few seconds WLAN connection will work

  I did this many times on laptops preinstalled Win7 and didn't have any problems. On all laptop computers pre-installed with Toshiba recovery image (factory settings) is not necessary to change the WLAN settings.

• How can I prevent the Satellite to sleep when the lid is closed?

  Hello

  I connected my Toshiba with an external HDMI monitor.
  The problem is that when I close the lid (I chose the monitors in dual options) instead of sending output to the screen external, portable sleeps.

  How can I stop the laptop to sleep when the lid is closed?

  Thank you for your time.

  Hello

  Go to control panel-> power options control
  Now on the left you will see the option called choose the closing cover

  Here you choose do nothing

  Concerning

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• Not able to install the wireless adapter built on Tecra 8200

  Hi all

  I have a Tecra 8200

  After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

  I cannot install the drivers for the card of m.

  XP is SP2
  BIOS is 1.60

  Could someone help me what to do, thanks in advance.

  Brgds,

  Thomas

  Hello

  If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
  [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
  "IrqRouteToPciController" = dword:00000006

  I found a statement of installation:

  1. new installation of Windows XP Service Pack 2 package
  or clean install Windows XP Gold package and install Service Pack 2 update image on it.
  2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
  3. the following window will appear,
  "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
  Then select "Yes".
  xxxxx is the location of TICardBusIrqRouting.reg
  4. the next window will appear,
  "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
  Then click on 'OK '.
  xxxxx is the location of TICardBusIrqRouting.reg
  5 restart the system

  Good luck!
  Good bye

• Satellite 5200 903 does not detect the wireless adapter

  Hello everyone,
  I wonder if anyone can switch me to it...
  Since I reinstalled the operating system (my XP pro SP2) PC seems not detecting don't nor the wireless adapter in the device under network adapter Manager.
  Also the light of the flexibility wireless no longer not.
  I also have problems to access the BIOS to check if the card is detected there, have not a Toshiba HW setup in Control Panel as described in the manual.
  Any suggestions?

  Hello Juliana

  The question is how did you install the operating system? If you use the restore CD to install all tools including Toshiba HW setup. If the unit is pre-installed with the Microsoft Windows XP Home edition CD, you must install all the stuff of Toshiba late.

  Just a little explanation about the wireless network card. Basically, if the wireless switch indicator turns not on s clearly indicate on hardware problem. I guess that the wireless card is faulty. Also check if the card is listed in the Device Manager.

  If you want to enter the BIOS settings pres ESC key at the boot routine and keep it down for a few seconds.

  Good bye

• Message: Sell another Application is controlling the wireless adapter

  Does anyone know how to move from one devices (using Configfree) to another wireless? A window opens and reads 'request to sell another control the wireless adapter.

  How do I changed the setting so I can connect to the device that is controlled?

  Thanks, Flopyear

  Hey,.

  To be honest I really don t know what you mean. What is wireless?

  What program tells you this information?

• Message error "another sellers application is controlling the wireless adapter.

  Hello
  I have a satellite A100 309 and I am trying to configure wireless (intel pro wireless 3945 ABG) card using the intel standard configuration tool (windows one does not support it). I have the following error message «another sellers application is controlling the wireless adapter» I guess that there is a conflict with the windows WLAN utility but I don't know how to solve this problem.
  I tried to uninstall and reinstall the driver but no way...
  Someone at - it an idea?
  Thank you very much.
  JF

  I put t know how it works on your device, but I assume that your camera it is preinstalled tool Intel PROSet WLAN. Using this application you can configure WLAN connectivity. Windows operating system also has WLAN configuration settings.

  The fact is that the two who cannot be activated at the same time. If you use Windows settings, you must disable the Intel PROSet. Remember in front of Windows settings, the box is removed.

• HP ENVY x 360-15-u110dx: reset the wireless adapter

  I have a new HP ENVY x 360-15-u110dx and it is not connected to the internet. I have to constantly reset the wireless adapter. What should I do to fix this?

  @pjg31660,

  Hello and thanks for the display on the HP support forums.  Here is a link that should help you solve your problem.

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• Unable to connect to the wireless adapter should use LAN

  another computer or a laptop can use the wireless adapter, but one of my knees can't connect to it. I have to use the LAN cable

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• I can do: sleep when the lid is closed, EXCEPT when an external display is connected?

  Hello

  Please let me know if this is possible. Seems to me like a current need, but I can't find a way to achieve this.

  I wish that the laptop to sleep when I close the lid (battery / plugged - matter), except when I have a connected external display.

  The script is very simple, I prefer to work with an external display, so I don't want or need the lid is open. When I'm on the road, the "sleep when the lid is closed" is a desired behavior.

  Is this possible?

  Thank you

  Roee.

  (1) this function is available in the Apple OS, but not in OS Win.

  (2) but, you can set a custom power plan to do this, so when you connect an external monitor just switch the power around plan. It is the easiest way to get what you want.

• Laptop will not go to sleep when the lid is closed

  Separated from this thread.

  Same problem here. My settings say that my Toshiba will sleep when the lid is closed, but half the time is not asleep and I can feel it's hot and turns on the fan. I am so frustrated with this new laptop and Windows 8.1. Looks like too many bugs in the software or something. More I am working on the new laptop the more problems that I find, like screen discoloration as well. The forums are useless. I do what they say, and the problem is the same. Forget the call from Toshiba. Needless. Nobody will help unless you pay them money to subscribe. What customer service?

  Hello

  Thanks for posting your concern here at the Microsoft Community forum. Let me help you with your concern.

  This problem may occur because of any change in power on your laptop options. If the default is set to hibernation and standby modes, your laptop goes to sleep when you close the lid, but then the Hibernate timer comes in and wake up your computer first and trying to Hibernate. He cannot go to Hibernate directly from mode 'sleep'. Go into the power settings and either disable hibernation or set the timer on a higher value.

  To apply the same setting to all plans:

  1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
  2. On the Select a power plan page, click choose the cover.
  3. On the page define power buttons and turn on password protection , next to when I close the lid, choose what you want your laptop to do, both when it is running on battery and when it's plugged in.
  4. Click on save changes.

  Tip: To save battery power and quickly resume working, select sleep. Sleep is a power saving state that allows a computer quickly resume the operation of full power (usually in seconds) when you want to start working again.

  To apply a setting to a specific regime:

  1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
  2. On the Select a power plan page, click change plan settings for the plan you want to change.
  3. On the change settings for the plan page, click change advanced power settings.
  4. Advanced settings tab, expand it cover and the Power button, action lid, choose what you want your mobile PC to do when you close the lid, for when it runs on battery and when it is plugged in, and then click OK.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.