Without using a DBlink connection to the other B DB DB a.

Similar Questions

• Satellite P750: Unable to connect to the other PC with WLAN

  Satellite P750 was working fine until yesterday.

  Today, when you use the Atheros AR9002WB-1NG wireless adapter I can't connect to the other pc on the network.
  However, I can connect to the internet ok.
  Other pc can not see me either.

  * When I use wired everything is ok *.
  I tried to stop the antivirus and firewall, but it made no difference. I reinstalled the drivers and etc. shares checked file.

  Can anyone help please?

  Hello

  You should enable the option called Ad-hoc to peer option in your WLan settings!
  Go to network connections
  Select connections-> properties-wireless
  Add the new network
  Here you must configure this (insert SSID, encryption, and password), and don t forget to check this is a computer-to-computer (ad hoc) network

• VMware Capacity Planning without using an Internet connection

  Hello

  I tried run VMWare Capacity Planner without using an Internet connection. I have run Performance and utility collection of inventory and then I synced data. I was able to see the CSV files in the Outbox. I copied the folder on an interenet connection machine having when I click on synchronize data, it began to send the data to the dashboard. the data has been sent successfully, but when I am logged into the dashboard there is no data view. A message was displayed as not enough data.

  Please let me know if I made a mistake in my approach.

  Thank you

  Pravesh

  can u check with the administrator of your organization, which has admin on dash rights and see if the data is correctly downloaded to the dashboard.

  also can ensure you that you use the same credentials on the two boxes on the client side. simple reason being it might be issue with the property user and group data that are downloaded.

• How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file.

  How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file. This means that the file is still in the iCloud and available to be downloaded to any device.

  In practice, I want to be able to scan and download through my documents located in my iCloud and once I didn't need them on my iOS device I would like 'load their return to the cloud' to my storage of the iOS device is not used.

  Thank you in advance to the community!

  Max

  The only way I found to do that once a file has been downloaded is to remove it and add it again through either from Finder on Mac or iCloud.com.

• HI, I can buy an extra App and that it is used by 2 different people on 1 account at once? The apps are PS en ID. So the first person will use ID all day and the other uses ID all day?

  HI, I can buy an extra App and that it is used by 2 different people on 1 account at once? The apps are PS en ID. So the first person will use ID all day and the other uses ID all day? and this account a 1

  Hello

  Please see licenses and terms of use | Adobe

  License Adobe CC can be activated on 2 machines using the same Adobe ID, but can be used alone at the same time.

  Kind regards

  Sheena

• Can I use multiple internet connections on the same PC?

  Original title: network: help me please. (title 2nd edit: I have 1 dsl, 1 wimax connection I want to use 2 internet connection on my pc, use one of them to download and one for navigation)
  
  Hello microsoft
  I need your help as soon as possible. I have 1 connection dsl and 1 wimax I want to use 2 internet connection on my pc? Can you help me? for example, use one of them for download and the other for navigation. Please help me?

  Why not!!!  You can use "Sun xVM VirtualBox" (software that allows you to use another Windows throw Windows)

  You just need to have a usb ADSL modem modem. While you can link the usb modem to the virtual Windows. (And a download in the virtual Windows Manager). This (USB MODEM) is necessary because the main window does not define the usb modem ( again MUST NOT IDENTIFY) TO IDENTIFY THE MODEM IN THE VIRTUAL WINDOWS ACTIVATE activate the setting of the Sun xVM VirtualBox USB controller and then install the software of your modem for the virtual Windows and then start the download. After The Connect WiMAX (Worldwide Interoperability for Microwave Access () To the Main Windows. Then, start the download with it. So easy! only, you should spend some time to get rid of.
  I've tried it! This works.
  ATTENTION:
  1. you should allocate your hard drive for your virtual windows.
  2. If you want to transfer files between two windows, you must enable the USB controller in the setting Sun xVM VirtualBox .  And a Flash memory is required to transfer files between two windows.

• Use of material connected to the remote computer during remote desktop connection session?

  I use Remote Desktop Connection a lot, and I mean... A lot. In addition to managing workstations without having to leave my desk, I started to run to the House to make use of the desktop computer powerful in the room without having to get up from the couch and laptop.

  However, I began to discover that far, I had to connect to the desktop computer to complete a task. An example is the computer that I'm controlling from the living room does not burn a disc. I can go stick a disc in the drive... but for some reason when I'm logged in from the outside, programs can't find the hard drive.

  Another thing I just tried... (... and before you think 'kinky'...) Just know that I think 'Security'... lmao), was to see the web cam (Microsoft LifeCam). Unfortunately just like the hard disk, the program says "connect the webcam to the computer.

  I guess the reason for this is to integrate the local hardware of controller in the session remotely... but whatever the reason, is there a way for me to operate the hard drive and the webcam to the computer, I'm connected during a session remotely with Remote Desktop Connection?

  Thanks :)

  (Moved to programs)

  Hi Chris,

  I suggest you to ask your question in the TechNet Forums, where we are the support technicians who are well equipped with the knowledge on issues of remote desktop.  Please visit the link.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w8itpro

  Answer please if you have any questions.

• m276n: print from a mobile device using a wired connection on the printer

  Hello

  I am considering buying the printer m276n for use in the home. I have a small Home Office on the top floor of my house which is out of range of my wifi signal but has a wired connection to the same router that broadcasts the wifi signal. I want to put the printer and connect it via a wired connection to the network. I know that it works perfectly for all windows home computers that are attached to the same network (wired and wireless), as long as I give you a fixed IP address to the printer.

  But since we use mobile devices more and more (apple and android) it will be a nice to have to print those as well. I watched Eprint Airprint movies, but all tell me that the printer must be connected wireless. Is it a necessity or my proposed wired installation will work just as well?

  Hi @MartijnS ,

  I see by your post that you would like to know if you can use the ePrint Airprint functionality with the printer and when it is configured on the network via an Ethernet connection. I can certainly help you.

  The ePrint and Airprint feature work when a printer is connected to a network. It can be wired or wireless to the router.

  Here is the document with a little information for print from an Apple Mobile Device.

  The documentation shows also wireless, but again, it works through a wired too.

  I hope this helps.

  Have a great day!
  Thank you.

• Problem of password of account, without that we can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid.

  Hi, I hope you can help with this problem. A friend has 6 computers networked to a Tower Server and have a problem. A worker student put computers into hibernation, and since then, nobody can connect to the network on this computer. The error indicates, "the trust relationship between this device and the network is no longer valid. I tried to get into the pc to try removing network and replace it, but I can't get on the Administrators account because it has been disabled. I'm at a loss on how to proceed. My friend cannot afford a service call, so I'll try to help him.  Thank you

  If the computer is on a domain then there are at least two accounts that can be used to remove the computer from the domain:

  • A domain administrator account.
  • A local administrator account.

  When your friend has launched Windows for the first time after buying the machine, he was prompted to enter the name of an account. This account is created automatically with administrator privileges. He should use it now.

• Encrypted SX10 cannot connect to the other encrypted SX10 internall

  Hi all

  I have 2 SX10s and can not figure out how encryption works for the latter. They are all two registrants to our VCS - C and unable to connect with each other. The two systems are active encryption and not 'Best Effort'. I think this might have to do with our VCS or our team of safety engineers. Help, please...

  Thank you.

  Hello

  May be small but had to check, are the units recorded over TLS? If not, can you try to do? The certificates should not be required unless TLS check is checked.

• Windows 7 homegroup starter tries to connect to the other win 7 homegroup not working does not as expected

  I have two samsung n140 NetBook, both come with Windows 7 starter, I try to get things homegroup networking.

  I have set up with the default values at the same time to share the photo, video files etc under homegroup sharing.

  He was asked to create a password for homegoup I did it (could have come because I have a NetBook connected initially to a pc running win 7 ultimate, which is where I created a homegroup password but this pc is no longer connected to the network, it's just two samsung netbooks)

  in any case when I connected this other netbook with the first he asked me the homegroup password that was entered successfully by me. However, nothing has been free since. These two netbooks running win7 are the only PCs in my home group.

  Ive managed to get to a point where in the record of the house band that netbook names are displayed in eachothers homegroup however is listed in network for the group shares residential eachother trying to access the network.

  Can I cannect for both computers on the network in the way outdated by sharing folders and access the network folder in my network places and can read and write, but not in the home group.

  Homegroup is where I want to control networking not by any other means, I would be very grateful if someone can point me in the right direction please or if its win 7 starter limit myself from network access to the homegroup.

  Thank you very much

  Hey fatfei,

  Welcome to the Microsoft Answers site.

  I want to erase some of the basics of networking in Windows 7 Starter edition.

  You cannot create a homegroup to a computer running Windows 7 Starter Edition. You can reach only a HomeGroup existing of the starter edition.
  This must be one of the restrictions placed on you while trying to connect the two starter edition of Windows 7 homegroup.

  So the only option left out here is upgraded to another version of Windows 7 that supports creating HomeGroup via Windows Anytime Upgrade or stick to the way they are connected at present.

  For more information, please read this article.

  Networking in Windows 7 Starter
  http://Windows.Microsoft.com/en-us/Windows7/networking-in-Windows-7-Starter

  Homegroup: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I use touchscreen when connected to the Smart keyboard

  Is the touch screen on iPad Pro work when it is connected to the Smart keyboard

  Yes - touch screen is still active on an iPad or iPhone regardless of any keyboard, blue tooth or the smart connector connected. Similarly, the pencil of Apple not to turn off the touch screen when it is associated with.

• How to use a switch connected to the DAQ card as a source of events in a Structure of the event

  Is easy using a switch on the front panel as a source of events. However, I like to use an external switch electrician on my card for the acquisition of data (NI PCI-6229) as the event source in the Structure of the event. Can anyone help?

  Happy New year to you too!

  Attached is an example in BT 8.5

  • It uses the time-out loop (running every 100ms) to simulate your reading of the data acquisition card.
  • A shift register is used to keep track of the previous value of the switch.
  • When a change of the switch is detected, the user event is raised and the display will show the new State.

  Running the vi with activated highlight performance can be useful.

  Steve

• One of my sites always connects, but the other becomes had an ftp error cannot connect to the host.

  My problem is in "connect to remote server". I manage two sites in Dreamweaver CS6, and they are hosted by the same guy.  A site still connects fine, but it stopped connecting. With the second site when I click the button I get a delay then "an ftp error occurred - cannot establish a connection to the host".

  However, I can still access the second server in the remote site through an FTP program and support host confirms that my connection works very well from his computer.

  I tried to do with the old stuff (1) Site > Manage Sites > export to create an .ste file (2) completely, restart the management of Sites (3) > import the .ste file (4) click on connect to the remote server - But that made no difference

  The two sites are hosted by the same company does not mean that they are on the same physical server.  Your connection problem may be due to many things.

  • Username and password may have changed or been reset.
  • Server permissions problems (GoDaddy is known for this).
  • IP blocking.
  • Server is down.
  • etc...

  Are you able to connect with an FTP 3rd party like FileZilla client?  If this isn't the case, I guess it's a server problem & you will need to contact your host.

  Nancy O.

• Settings.ini is being used by another process close the other program, and then click Retry, or click Cancel to exit sidebar

  Cannot access the internet

  To open a new account, you must be an administrator.  Is your current account, an account administrator or you still have an active Admin account?  Go to start / Control Panel / user accounts / manage other user accounts to check what's there.  It that account you closed was the only administrator account, (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Create two accounts administrator with good passwords (secure and that you will remember).

  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.  Once this is done, connect using one of the new administrator accounts and you will once more control of your system (but you should always use a standard account for your work on a daily basis for security reasons).

  I hope this helps.

  Good luck!

  P.S. You will still need to try some of the procedures described above to solve the problem of the internet and perhaps other issues.  It depends on what happens when you start using your new account and if that solves the problem.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.