Without warning, my screen zoom factor changes.

Similar Questions

• Why can't my androgenic computer on its own without warning?

  While using my laptop, from time to time it will spontaneously turn off without warning, the screen is just blank. I have a dell Inspiron 1520, using windows XP.

  Just guess... but maybe it's overheating. You can find many
  the info with a Google search for: laptop stops randomly

  The following links are a few examples:

  Why my Toshiba laptop suddenly stops by itself without warning?
  http://www.laptoprepair101.com/laptop/2006/01/04/Toshiba-laptop-overheating/

  How to stop laptop overheating problems
  http://www.computer-Adviser.com/stop-laptop-overheating.html

  Laptop overheating problems - the easy cure
  http://EzineArticles.com/?laptop-overheating-problems---the-easy-cure&ID=1269144

• L50-B05C satellite crashing while gaming - black screen without warning

  Laptop Toshiba Satellite L50-B05C crashing
  I write because there is no section of series B in the section.

  The laptop is 2 months old and has just recently been crashing (blacken off instantly, screen) without warning when I play a game.
  It had worked perfectly in these games until about a week ago.

  Use CPU, memory and disk are all weak, so I have no idea of what is happening.

  Any help would be greatly appreciated, thank you.

  I write because there is no section of series B in the section.

  Just FYI: it is an L series (L50- xxxx)

  The laptop is 2 months old and has just recently been crashing (blacken off instantly, screen) without warning when I play a game.

  Have you noticed a temperature higher while gaming?
  I guess that the laptop automatically stops due to the higher internal temperature.
  This is nothing unusual if the temperature is too high... the laptop would shut down to prevent the equipment from damage...

  Try this:
  Go to advanced windows power options and reduce the max CPU performance at 90-95%
  In addition to change the cooling method for: performance.

  I would also recommend to check if fans and the vents are not clogged with dust...

  I'm not sure where you live but in my country, the temperature is currently very high and I guess it's really hard to cool the internal parts and to maintain the temperature of the low laptop

• Scaling a 2D image without using the zoom factor

  I currently have a large 2D image and several smaller 2D iamges that overlap the magnified image.  The big picture is created with the draw in labview, while smal iamges are created with a png image.  Magnification on the enlarged image is 7, while 2D of png images must be scale par.21 to fit in the big picture properally.  As 2D images are stacked, while the rear image updates sometimes "flickers" through the small images.  To resolve this problem, I can combine images, but it does not work because different zoom factors.  Is there a way to reduce an image without using a zoom factor?  Is it possible that I have to scale the bitmap programmatically?

  Thank you for your time

  Mitchell Wörner

  Your postal code for you, but in the past when I needed to resize an image, resize it GDI built into .NET always worked very well for me.

  http://forums.NI.com/T5/LabVIEW/NET-image-resize-how-to-convert-to-format-LabVIEW-can-use/m-p/219902...

  I have used this in my Show Open VI quick drop

  https://decibel.NI.com/content/docs/doc-31302

• a kind of automatic update suddenly without warning started to close all the documents I was working on, rebooted and lost all the changes I had made in the past three hours

  I've worked hard for three hours in the middle of the night, made extremely dfficult work on several Word documents and Excel spreadsheets. at the same time - the kind of work that you can do if you're sure not not to be interrupted. All of a sudden a few (probably Windows) update began to close the files one by one, "don't turn off your computer" was the message.
  I waited. It restarts, but then I realized all of work my three hours had disappeared. The files are still there, but in their unchanged form. How is it you lose nothing if your battery runs out and you can restore the files, that you deliberately deleted, and there is a permanent record of each tiny websearch? However, Windows can come in the night and boldly to destroy three hours of irreplaceable forced labor without warning! I won't ever be able to replace it.

  Set the automatic update process so that you can control if the updates to download and install.

  And, as a general rule, always save files regularly while you work.

  HOW to: Configure and use automatic updates in Windows XP
  http://support.Microsoft.com/kb/306525

  How to configure automatic updates by using Group Policy or of registry settings
  http://support.Microsoft.com/kb/328010

  for Vista: http://windows.microsoft.com/en-us/windows-vista/Change-how-Windows-installs-or-notifies-you-about-updates

  for Windows 7: http://windows.microsoft.com/en-AU/windows7/Change-how-Windows-installs-or-notifies-you-about-updates

  Take control, adjust your settings in THE and save your work as you go along.

  TaurArian [MVP] 2005-2010 - Update Services

• Printer under the icons of the device names changed around without warning. Printer will not work now.

  Names under icons of printer in the devices section exchanged around without warning. I can print is nothing more.

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the issue on the printer.

  I will definitely help you with this.

  Please provide information below.

  1. you get any error message?

  2. what exactly happen when you try to print?

  3. don't you make changes to the pc before that?

  I suggest you go through the below methods:

  Method 1: Try to run the printer Troubleshooter:

  1. Press Windows + R key.

  2. Type of Panel, and press ENTER.

  3. Click on troubleshooting.

  4. In the left pane, click View all.

  5. In the list, click the printer and run the troubleshooter.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• iPhone 3G, without warning, the iPhone screen shows (vertical hold) logo from itunes, with a port usb and the arrow pointing up. I have 10.7 update iPhones.

  Without warning, the iPhone screen shows (taken vertical) logo to itunes with a usb port and the arrow pointing up. I have 10.7 update iPhones. When this iPhone is connected to the computer, Apple recommendation is to "restore" the iPhone. If I do this, would be erased all data stored? Thank you

  You would have to post on Apple Support communities to get a definitive answer on this one.

• Monitor dims without warning.

  Monitor screen darkens without warning.  Desktop agents is the control screen to turn black or is the Dell Trinitron monitor at the end of its service life.  The screen stays black for odd times.  Black screen time duration varies from five minutes to 45 minutes.  The display returns to its normal brightness after that which precedes, noted the dark period.  The black sessions initiate the display shows normal after black periods without any warnings.  I'm puzzeled and would appreciate your comments.  Thank you.

  Hello

  • What were the changes made before the issue occur?
  • What version of Windows are you using?
  You can refer to the following steps:
  Step A.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  See also:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• My gateway Tablet close without warning. Now more trouble...

  My Gateway Tablet PC with windows XP stops without warning a few days ago. Now when I try to start, it doesn't do anything (the screen is black, fan works, power and light is on), it will start up, I log on, and then it crashes after a few minutes, or the screen goes black (power light always). I managed to make it work yesterday, and I ran the Microsoft Saftey Scanner. He came clean. I keep reading on overheating which could cause this, but I don't think that's it. The fan seems to work very well, and it does not start or stops immediately after 2 days of course stop. It worked fine before all this, what's wrong? Help, please!

  Hi Bmjohnso9192,

  ·         You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 2: You can also check the below mentioned article Microsoft Knowledge Base and check if the problem persists.

   

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

  Let us know if that helps.

• Laptop shuts down without warning

  Hello

  I have a laptop - HP Pavilion Sleekbook 15-b000ej with Windows 8.

  Recently, she stops without warning, but only when working on the battery. Although I guess the battery is old and I need to get a new - I don't understand, is why the laptop stops instead of going to hibernation. I checked the power settings. It is supposed to never closed, but go into hibernation, but it never does.

  So is it the battery or something else?

  Thank you.

  Hello

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing due to shutdown of Windows problem. I will definitely help you.

  This problem may occur because of corrupted or incorrect power settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control. Please follow these steps:

  a. press Windows + C keys together, and then click Search.
  b. type Troubleshooting in the search box and click on it in the search results.
  c. click on "display all" and then click "Power".
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Please see suggestions of Kate Li and marked as answer kelvin_hsu, Microsoft of contingent personnel, Moderator on January 27, 2014.
  https://social.technet.Microsoft.com/forums/Windows/en-us/3149cdae-21ee-4B2A-9321-5d4841e1c24b/Windows-shuts-down-instead-of-hibernation?Forum=w8itprogeneral

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• The screen resolution has changed.

  After that I have updated to the latest version of Muse, my screen is enlarged. It looks like the screen resolution has changed. How can I change the resolution of the screen on Muse?

  On Windows, 2014.3 Muse now supports 100%, 150% or 200% resolution, according to the scale factor you set in Control Panel. My guess is that you have your control panel set at about 125 per cent and Muse chose the scale factor supported 'closer', which is 150%. We've heard a few users that they would prefer Muse to continue functioning at 100% in this case.

  This sounds like the situation you're in?

  Now, you need to set the scale factor to your screen to 100% having muse running at 100%, but we are working on a solution in the short term to say the Muse to operate at 100% without changing your scale factor of Panel controls.

• Text disappears randomly without warning

  Met a very important bug today that I need to find a way to move as soon as possible because it is completely prevents me to do any work.

  Every time I have change all text - whether it is editing a text layer, or with a new, regardless of the text is only randomly and without warning disappears.  No matter the weather, I change the color, font, size of police or other type parameters.  Sometimes I simply move the mouse in edit mode and the text just disappears.

  Made a video of the bug in action.  Virtual keyboard on the screen that you can see that I'm not hitting any keys to make the text disappears.  Today is the first day, I noticed this problem and I have absolutely no idea what is the cause, but it happens 99.9% of the time that I try to change any text.  Latest version of Photoshop, CC, OS X, etc.

  http://f.CL.LY/items/2s3y0d2d1R1c2Y173Q38/Photoshop-bug.mov

  Please advise, I really need to get it figured out as soon as I can - as you can imagine it is impossible to do any kind of work without being able to type a single character.

  The bug lies in dictation under MacOS code.  We are not ignoring the problem - but we can fix bugs in the Apple operating system code.

• 6s deletion again, cause emails sent without warning or apparent.

  During an attempt to find the errors in the composition of any email, I had important text permanently deleted without my choice and without warning. Happens after that I have 'select all' then 'talk', and while speaking, if I touch any key on the keyboard before his term speaking all the selected text is eraced without leaving a trace. Is it a defect? If this isn't the case, then what is the purpose, and I'm not a first choice? Is it possible to fix this? Thank you

  Hey Bradladley,

  I understand that you have questions about editing text in an email on your iPhone. I can delete it for you.

  From what you describe, highlighting the text and by entering the letter or number, will erase what is currently highlighted. The idea is to make changes like bold, italic, underline, and even replace highlighted text. This works in the same way as it does on your computer.

  Now one thing I want to point out is that you can cancel it if it was an accident. All you need to do is shake the iPhone and you will see a prompt message to cancel the changes that have to occur. Cancellation of the faucet and your text will come back. Check out the link below for more details.

  Change the text
  http://help.Apple.com/iPhone/9/#/iph3c50ee9e

  Take it easy

• Tecra A4 just off without warning

  Hello

  I have a Tecra A4 PTA40E when I insist on the system than just, it stops. Does it systematically and without warning however if I just leave the machine on the login screen, it is fine. The problem doesn't seem to be specific to a particular application. It's more a case of if I run too many applications happen.

  Someone at - it never had this happen or got any ideas? I'm running the latest drivers and have recently rebuilt with XP and SP2.

  These machines contain a stop errors written to the bios when a system error occurs that might give a clue? There is nothing in the event logs.

  Thank you very much

  Hello Huw

  On this forum, you can read several descriptions of the same problem and for me, the situation is quite clear: your laptop turns off due to overheating. With the use of the CPU, temperature reached material level critical and mobile turns off everything simply.

  It is because of the material. Another way some hardware may be damaged.
  It's time to clean your laptop. I don't know if you can do that alone, but the best way is to clean it on professional way.

• Equium M40 simply stopped working without warning - do not power led.

  My laptop is almost 2 years old and while you browse using the battery it just died without warning.
  Put it on the sector but no orange at all.

  I have no power in the machine at all.
  Its dead as a dodo. My main concern is to get the info off the hard drive.

  Any ideas of how I could do this? What could be bad, the motherboard or disk hard drive itself.

  Thank you, Lorraine

  Hello

  If it's not nice that your machine was throwing the towel, but after your description, I think it would be worthy to check if the adapter still works.

  It should not be the motherboard because sometimes just the AC adapter is giving up. And regarding your files on the disk do HARD just after:

  Go to an electronic market, buy an USB-drive HARD-external enclosure for IDE drives with 2.5 form factor "(portable hdd´s) and put your laptop hard drive in this case."
  Voila, now you can back up your files on another computer.

  If you have any questions, just ask.

  Welcome them