WLAN does not come, the rest orange light.

Similar Questions

• Satellite L100-120: Wlan does not allow the transmission of large data packets

  Satellite L100-120, Intel 3945ABG.
  Router Wi - fi is 3COM OfficeConnect Wireless, same problem with Dlink DI-524.

  By default my wi - fi card does not allow the transmission of packets of data.

  I use ping-f-l 1464 192.168.1.1 to check if it is possible to send a large package. All packages more then 600 large fail to be sent.

  It is tragically wireless performance and I almost cannot use internet at all. I solved the problem partially by setting the MTU to map wi - fi at 548. Connection is now stable, although I can not yet send massive emails. Anyway, it is not a good situation to have such a low MTU value.

  Everybody respected this problem?

  I think you will find the solution in this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15101

  I think the secret is the update of the BIOS!

• MacBook Pro (2014) does not charge despite an orange light when plugged

  Hello

  So my 2 year old Macbook Pro (retina) does not load when it is plugged in - spite, projecting the orange light. I have a battery (20%) and it is reduced whenever I use it and will be soon drained.

  Some of the things I've tried

  -Reset SMC - tried but no change after

  -When I use the mac when it is plugged in the battery icon in the top bar done see the support - but there is no increase in % of the battery. Continuous use it starts to fall.

  -During use (and what battery is plugged) - I checked the report system (about this Mac section) - in the energy sector - it is said does not charge (despite being connected, the orange light and the symbol in the top bar)

  What do you think guys that it is? MLB? Battery?

  What I have to replace or can it be fixed?

  If you have the Apple store, take the machine evaluation.  There is no charge for this, but you need an appointment.   The first thing I would check would be the cable.  You have another machine to test this with.

• Portege R100: WLAN does not recognize the network

  I have a 2 year old Toshiba R100 Notebook.
  It has a wireless adapter:

  Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter

  We have tried several times and had technicians trying to connect to our WAP network office. He simply do not recognize the network and we offer all mailboxes menu to connect. It works fine on WEP networks and open.
  Our network is one: -.

  Cisco Linksys Access Point Wireless-G with SRX, model WAP54GX

  It has been suggested that I have buy a wireless card for WAP networks put in the slot of the card.

  Would you agree?

  If so, then that one would you recommend?

  Hello

  It seems that the card supports only WEP encryption and cannot handle WAP encryption that secures the WLan network.
  Fact is that encryption depends on hardware and not software. This means that if the card doesn t supports the Protocol WAP for the update of the driver will not change this situation, but only a replacement card.
  So I agree with you that the replacement card may solve your problem.

  Unfortunately, I can't give you any recommendations because I m not 100% sure what card uses the WAP protocol, but you can order the Wlan card compatible and supported by the Toshiba service partner in your country. AFAIK the guy order the Toshiba parts directly.

• Samsung ML2525W printer does not print, the Red toner light stays on. Replace toner, no change.

  My Samsung Laser printer is less than a year.  I rarely use it.  The red light by the symbol of the triangle (cartridge toner according to manual) came and I was no longer able to print.  I have replaced the toner with a new one cartridge, printer and USB for PC connection and turn it back on about two or three times.  No change.  I even opened a 2nd (new) toner cartridge and replaced thinking one of my 2 new ink cartridges could be a dud.  However, still no printing and the red light stays on.  Any suggestions?

  Hello

  I see that you mentioned that the printer is less than a year, so I would recommend that you contact the manufacturer of the printer to help. The issue seems to be with the material.

• Satellite L350D - WLAN does not work after the recovery disk

  Hello

  I just got a L350D. I ran the tool recovery disk, without any other program running. It is on a good way to end the second disc and that: BAM! blue screen. Since start-up, my LAN and WLAN does not work.

  He always says ' WLAN 2.0 bg adapter "to which no driver is found. The driver is a Realtek WLAN and LAN.

  Don't you think that the crash of the WLAN and LAN module fails?

  I tried the things:

  System reset
  Reinstalling the driver

  but nothing has worked.

  Someone at - it advice?

  Thank you very much!

  Mycale

  Hello!

  I put t know what is the reason for this BSOD when installing, but you can post the BSOD code? For example, you can search based on Microsoft Knowledge for this code.

  In addition, I would try to update the BIOS of your laptop that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After you have updated the BIOS to try to update the WLAN and LAN card driver, or try to reinstall Windows using the Toshiba recovery disc.

  Good bye

• Satellite M30: Wireless light does not come

  My wireless on my laptop light is not.
  I switch wireless enabled but the light does not come and my router is turned on.

  Also, I can't check the local networks.
  Could someone help me identify this problem?

  Hello

  The wireless network card is properly installed and listed in Device Manager? To check first please all NICs.

• How to return to changes saved when the menu of 'come back' does not include the version of the document I'm looking for?

  Hello, I use Pages. I worked on a document for several days, save the changes on the way. I have closed or saved the document and asked a question about saving the changes. I pressed on continue, thinking that I was saving my document. It seems that the computer has erased all changes I made since I finally opened the document. The document says he was created today, and none of the versions of my last week of work are available. I want to restore a version with all my important revisions. The menu 'Browse all' and 'Come back' do not have one of my newer versions. Is it possible to find?

  It is important that you have all the hours of backups Time Machine on an external drive. If open the recent item and return to the menus avail you nothing...

  Open a Finder window. In the search window, type the following line, replacing the date with the one that is relevant to the review date that seek you. The following explains show me all the documents pages that have been modified since the specified date. The same syntax works in the Spotlight window.

  modified: 15/12/15, genre: pages

  Also check iCloud drive.

  If it does not find the file you are looking for and you don't have a Time Machine backup, you've learned an important lesson or two.

• I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I already bought the movie HD, 'V for Vendetta', before it came with "iTunes Extras" but my purchased copy does not come with the Extras. Is there a way to fix this without having to buy the movie again?

  I was told that movies in the iTunes Store can be changed to include "iTunes Extras" if originally it did not come with extras. But there is a catch you get just the extras if you buy just the issue for the first time. If you have already purchased it, your version may not have the extras. This means that if you want the extras, buy the movie again.

  If you now get the Extras will depend on what the movie studio did for example if they have updated the version you have purchased, or replaced by a new version (which will be treated as a separate purchase): buy and play movies with iTunes Extras - Apple Support

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• Create a shortcut on the desktop the icon comes back to a 'globe' for any shortcut, I create. It does not cover the actual icon as shown in the url or web page. Any ideas?

  Create a shortcut on the desktop the icon comes back to a 'globe' for any shortcut, I create. It does not cover the actual icon as shown in the url or web page. Any ideas?

  Hi Ronnie,.

  I see that you can not create a shortcut on the desktop. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what operating system is installed on the computer?

  3. what security software is installed on the computer?

  4. have you made changes on the computer recently?

  5 is the issue limited to the creation of shortcuts on the desktop?

  6. How do you try to create a shortcut on the desktop?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Thank you.

• message does not come to the main actor

  I send a message to the child actor actor parent. The message does not appear the actor to parent. But if I m using a brakepoint to check then it comes. Can U suggest me a solution that.

  It must be remembered that the kernel running of any actor actor is a clone. You cannot just open the kernel of the actor of a current player for the project and wait until you open the clone who is running, it does not work like that.

• CVI2009 window does not come forward on the breakpoint

  When I run my program, with a defined breakpoint, the program stops at the breakpoint, but the screen of the BCI does not come forward.  If I can get to the icons will stop or step and click on one, the program will be as it should.  The other important element in this puzzle, it is that there are two icons of programs in the toolbar.

  Update: the problem has nothing to do with the code I sent you.  I fixed the problem of duplication of icons by unchecking the main Panel button a taskbar under the Panel change > other attributes in the file of the IUR.  In the same place, I set the ICB does not come forward by setting the floating Style '' never. ''  This seems to solve the problem.

• HP Officejet 6700 Premium: Scan function screen does not come to the top when selected

  After updating Windows 10, the scan function when selected in the application wizard does not come to the top. Installed the driver updated, no effect.

  Hello

  Thank you for using the forum.

  You have downloaded and installed the FULL features of HP software?

  Here is the link for convenience:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930O2

  We suggest that you uninstall the current drivers before reinstalling the software downloaded full of features.

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.