WLAN user Reauth comments

Similar Questions

• ISE 1.4 WLAN MAC filtering comments

  Hello

  I just installed 1.4 ISE and features of the company work. However, I have problems with the installation of comments.

  The WLC (5508), I have a guest and foreign controller setup, the client being in the demilitarized zone. I am Setup ISE as radius server and when I select the MAC filtering option, it won't let me connect to the WLAN comments. Keeps trying to connect and fails authentication.

  I have the installation RADIUS, defined by the WLC in ISE, checked the overide AAA and RADIUS selected as the NAC agent according to the instructions online. But I think that MAC authentications keeps failing.

  Any ideas anyone

  Thank you

  Good work on the resolution of your problem! (+ 5) to me!

  If your problem is solved, please mark the thread as "answered" :)

• The end user Analysis comments

  Dear all,
  A report on the dashboard page.
  My requirment is:
  I should get a few comments below the report.
  How to do this.
  
  Thank you

  Hi reda,.

  Check out the blog of Vidal. You can do this with the write-back option;

  http://oraclebizint.WordPress.com/2008/01/27/Oracle-BI-EE-101332-report-comments-in-dashboards-and-chat-options-using-writebacks/

  Good luck

  Daan Bakboord
  http://obibb.WordPress.com

• What are users with Cisco 802.11n 802.11ac WLAN APs running on Low Power?

  Experts Sars WLAN,

  I'm new on a big installation WLAN here and noticed that not only the AIR-CAP2702I-E-K9 communicate on the Management Station first central and many changes of low-power 2.4 GHz antenna power level.

  People here tell me that it is not harmful, but I am slightly dubious and would like your opinion here.

  WLAN access points are activated with 2.4 and 5 GHz-antennas and shoot only 15.4 Watt following switch.

  Interface Admin Oper Power (Watts) class of device
  Of the PS to the device
  --------- ------ ---------- ---------- ---------- ------------------- -----

  Ba3/4 auto on 17.3 15.4 4 AIR-CAP2702I-E-K9

  First is revealing:

  "APis running on Low Power." Please disable Radio one and reset the access point to get full power on the other radio. »

  The access point is configured for 802.11n on both bands and 802.11ac on 5 GHz.

  I can also see many Power Level change on the 2.4 Ghz antenna.

  Here people are complaining about downtime on laptops for SAP applications.

  Also a voice over WLAN installation does not work very well.

  But I don't know if this has something to do with low power.

  What are the consequences for WLAN users in this scenario?

  Changes in the level of power can cause interruptions to users of WIFI?

  Is 'Low-Power' - Situation responsible for a large amount of sending changes to feeding on 2.4 GHz?

  Who knows more and has experience with low-power facilities?

  Thank you for any comments on this

  Wini

  Just to add

  What are the consequences for WLAN users in this scenario?

  * Anything, just change really the number of antennas is used

  Changes in the level of power can cause interruptions to users of WIFI?

  * Change in power level, do not make changes to string

  Is 'Low-Power' - Situation responsible for a large amount of sending changes to feeding on 2.4 GHz?

  * No.

  Who knows more and has experience with low-power facilities?

  You should focus on your environment and what you see. With low power due to the PoE does not affect the user experience.  If your access point changes the power too high or too low, you can introduce some poor duplication of coverage or channel.  If you are also in a building/space tenant shared, other installs nearby Wireless will affect your RF and yours will have an impact on their. Nothing we can do.  You must set customer issues before assuming what is wrong, that nothing could be wrong.  The updated client drivers is also a good thing to do to eliminate this problem.

  -Scott

  Please evaluate the useful messages *.

• Allow users on blog comments?

  Hi all

  Maybe it's something that I forget, but how can I do to allow users to comment on my blog? I looked here and have so far not been able to find out how to do this.

  At the present time when publishing each post, I have the box "Enable comments" checked, but looking at my post it just says "Post a comment". and there is no form or whatever it is to allow users to comment on.

  Is there a tag I need to include in my blog/post template, i.e. {module_comments} or something to display a form for users to comment on?

  Or do I need to create a form using the web form modules and then insert in the blog page using "add form to a web page" / by manually adding the html code in every post?

  Any advice on that would be great, thank you for your help in advance.

  Guy

  Hey guys,.

  By default the layouts of the blog of British Colombia have everything what he. The form of the blog detail page layout have been removed. You will need to enter the html code which is in the layout of the blog of detail (so you don't lose it) and then reset by default in the admin.

  You should see the original layout with comments.

  If you feel your confidence with your skills in html and css you can just insert the comment form through the Manager of modules and html mod and style you need.

• Why additional users?

  I have a Windows XP Tablet. I had a problem that required me to recreate the image is to say re - install Windows. I am the owner and the only user. When I look in Control Panel > user accounts, I see only 2 users - Jeff and comments. If off guest account. But when I look at my computer > C:\Documents and Settings, I see icons for all these users - not in this order: administrator, Administrator.JEFF - A40763A256, Jeff.JEFF - A40763A256, all users, all Users.WINDOWS, default user, Default User.Window, comments

  Looks like there is some sort of duplication. Do not know what is this A40763A256, but it's the 'domain' that seems to be used by default in my OmniPass (?) password software.

  My articles all seem to be under Jeff.JEFF - A40763A256

  I don't know if this is normal or has been somehow created by the reimage.

  Discuss with your domain Admin and the cheque or the rebuilding Active Directory and group policy, he could cause by recreating the new admin or add to AD.

• New logon user - new user account is created, but it does not work

  I have Windows Vista Home Basic Edition.  My computer has suddenly developed a little problem on user account and the guest account.  Every time a new user is created in the user accounts in the Control Panel, or the guest account has been enabled, users cannot open a session.  Any attempt to these users or comments of logon is greeted with "service user profile Service does not have the logon - user profile cannot be loaded."  When the new user is removed, and is used to save all the files, there is no file to be saved.

  The problem is not a corrupt profile or SID which should be deleted or renamed and so on.  The problem is that when I create a new user through user accounts in the Control Panel, no profile or anything else seems to be created with it. The computer shows absolutely nothing more than the new user in the title of the user accounts and on the logon screen.  The new user is not in the settings under the my computer properties. There is no document (desktop and so on) for the new user in Windows Explorer; There is no SID for the new user.  It seems that there is no profile or anything for the new user.  System Restore could not help, because the incident that wiped out all system restore points also annihilated profiles. There is no '.bak' file in the registry for all users.

  I have the same problem with the guest account.  There is nothing in the browser to indicate the existence of a guest profile. It doesn't seem to be a SID for the customer.  The guest account cannot be used because any attempt to logon as a guest is greeted with "service user profile Service does not have the logon - user profile cannot be loaded."

  Yes, please is there someone who can help us solve the problem of not being able to effectively create new users and have a guest account. Thank you.

  Hello temp8127,

  Thank you for your answer!
   
  You can do a 'repair Start Up' but will have installation disc.  If you perform a new installation, then Yes you will need to copy your personal files on a device.  Please let us know status.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx#ex
  NoteIf your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions. Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cisco ISE comments Sponsor Isssue Portal

  Hi all

  We have insatalled 5 boxes of ise 3315 IOS 1.0.4 in our network where in two of them are admin node, two services strategy and has a node mnt. We using sponsor portal for guest user wirless comments where we integrated WLC 5508 with ise and using weblogin for guest users.

  We have created open ssid wlc and external aid redirected url to ise for the login page of comments.

  But when we create a guest in the sponsor for guest user connection, user that we faced after publication

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection.

  Can us guest login successful after comments connect to the portal of reviews or redirect any other link as google.com for guest user will be done the knowledge he is able to access the internet now

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user.

  Can someone help me resolved on observation about covers them cisco ise comments sponsor Portal

  Thank you & best regards

  Pranav Gade

  Pranav your answers are online,

  (1) when guest user gets connected to WiFi and connect to the portal of comments with credentials after putting the credentials then his new redirect to the same login page

  wihout invites successful connection. When you use CWA (Central web authentication) there is no way we can redirect users by using the redirect url because it will always redirect users for each time they start a web request. There is no other cost functionality that will remove this condition because they have already been authenticated.  Here is a guide that explains the user experience when using web Central auth -

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/user_guide/ise_guest_pol.html#wp1296954

  Can us guest login successful after login guest Portal comments or redirect any other link as google.com for guest user will be acquainted with it is able to access the internet now This is not possible, you can change the verbage and force the AUP to be displayed to users informing them that they can start their web request after hitting the button I accept.

  Here's to justify it experience, once users go through the process of reviews-

  http://www.Cisco.com/en/us/products/ps11640/products_configuration_example09186a0080ba6514.shtml#final

  (2) we have appointed time profile 8hours first user login guest. When the guest user gets connected while putting in credentials on the portal of comments.

  But we are facing problem after about 20 mins enhanced disconnects Internet and comments again Gets the login page of the portal of the guest and if we put the same credentials, then his work but after about 20 min interval disconnected Internet user. Check advance timer on your SSID you can be hitting the session on the WLC timeout. Please disable this option and let the functionality of COA ISE at expiration of the user on the controller sessions of.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• How to print the password of account invited WLAN?

  When a guest wlan user is created (by the LobbyAdmn function) I get a box pop up with auto-generated password. This is normally a relatively complex password. Is it possible to print it with for example a printer so that I can give to people and wish them well, rather than to write, make mistakes, joking about my hand writes etc etc... I think it looks quite unprofessional.

  Hi Joerg,

  (Unfortunately) this feature is only available when the creation of guest accounts

  using the WCS, as shown in the attached doc. With WCS, you have the

  option to print or send this info;

  http://Cisco.biz/en/us/docs/wireless/technology/guest_access/technical/reference/4.1/GAccess_41.html

  See you soon!

  Rob

• Creating visitor WLAN wireless controller

  When you create a client wireless internet on a wlan controller, type what is the difference between WLAN and LAN comments -? is it really important which one choose it?

  Well, the WIFI network is just wireless clients and the clients LAN is for customers connected through the cable network. A different topology and environment... that's all

• Recovery of comments in a pdf document

  Hello, I have a document that a user has commented on and saved.  After re-opning the document, the comments have disappeared.  I have the PDF and the .tmp, is possible to retrieve the comments?  The .tmp is not able to open in the reader.  He says that the file is damaged.

  Hey erikw81120081,

  Could you please check under Edit > Preferences > Documents if the option "automatically save changes to the temporary file every XX minutes" is checked or not.

  If Yes, then you might find a saved copy of the PDF file somewhere in the temporary folders of the drive.

  Let me know.

  Kind regards

  Ana Maria

• Limitation of SSID WLC 2504 Hall admin

  Hello

  I want to start using admin Hall on 2504 WLC for guest WLAN SSID. I connected the loby of RADIUS administrator accounts and I am able to connect. But even I use local account or account of RADIUS, I can't select which WIFI SSID I want limit for new users of comments.

  So what I'm missing? I see only "all WLAN", but I want to have just "guest_wifi" ssid. The reason is to limit admin lobby by selecting 'all wlan.

  Thank you

  Yes, I missed that, sorry for wasting your time, I just tested, the WLAN should has webauth in L3 security is in order, it see in the Hall admin page.

• How can I get rid of the new tab

  I like the way I was put in place, and all of a sudden it is changed without asking me for it. My home page has been Super Start and when I opened a new tab it says Super Start and it was my home page. Now, it says new tab and my home page is a bunch of GREAT photos of my favorites, and when I remove some that it continues just appeared with more. I'm not so how can I get rid of him?

  Oh, OK, I forgot SuperStart.

  If you are not already using the extension Classic theme restaurateur, please ignore this.

  To get the SuperStart on your new tab page, users post comments on his page have suggested a few different approaches:

  (1) set extensions.superstart.set.browser.newtab.url true -if you are not familiar with using about: config, here's how:

  (A) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste super and make a pause so that the list is filtered

  (C) If extensions.superstart.set.browser.newtab.url preference is false, double-click on it to change for real

  Then quit Firefox and start it up again (according to critics).

  (2) use the extension new tab override the value: superstart

  I have already mentioned earlier, this option, but it would be rather on: newtab on the extension Options page.

• New Comcast Modem does not work with my Airport

  I got a modem from comcast yesterday to replace the two separate modem, I had. One was for the phone, the other was for the internet.

  One that has been for the internet, I've owned and the phone, one was theres.

  I just disconnected the internet one and has replaced with there router cisco wifi, telephone and internet, after waiting five minutes, he final when it is online, but let me just use wifi to my account number and phone number. while I was doing that I noticed that airport extreme was flashing a yellow light and the only way I could get online was to change my iMac in wifi. After an hour and a half with comcast, they said that I need a technician to come out and it would cost me so I didn't say thank you, it worked before that your modem is installed and your faults will return your modem. I only need an internet modem and voice of dose I don't need WiFi. Hope that you can report a capable modem from comcast that fits this situation.

  I think you would agree that it would not much sense for us to recommend a modem without knowing if it would be supported by Comcast... so, could you please provide a list of Comcast 'approved' modems, choose?

  Once you have provided a list of supported modems, other Comcast users can comment on their experience with the products.

• We could not complete your iTunes Store request

  I use the latest version of El captain, on an iMAC of 2015.  My iTunes library is on my Synology NAS. I use a router ASUS RT3100.

  In the last month, I get from these random popup.  «We can complete your iTunes Store request.» The network connect timed out.

  This happens every day.  My internet works fine, and I'm not losing connections.

  I even reinstalled (downloaded the latest iTunes again 12.4) and it still happens.

  How can I fix it?

  Apple draw / all users can comment on that?