WLC 2100 cannot locate AP1242AG

The AP1242AG is a TOWER, it has red flashing, my controller cannot locate the access point at all.

AP1242AG:

Cisco IOS software, software of C1240 (C1240-RCVK9W8-M), Version 12.3 (11) JX1, RELEASE SOFTWARE (fc1)

I can't config one thing at the level of the console AP because it is a lightweight AP... Controller cannot detect this AP and there is therefore no way to configure this access point to all the... Help. Thank you.

Hello

Please take that look in this example guides.

They contain step by step instructions and examples of troubleshooting and I am sure that you will succeed with them.

The DHCP OPTION 43 to light Cisco Aironet Access Points Configuration example:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml.

Record the light AP (LAP) to a local network (WLC) wireless controller:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml.

HTH,
Tiago

--

If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

Tags: Cisco Wireless

Similar Questions

  • I read the excellent instructions, but cannot locate the green arrow to start the download! I did not accidentally remove the arrow, because he was never

    I went on the Mozilla site to download to my Mac. I read the excellent instructions, but cannot locate the green arrow to start the download! I did not remove accidentally the arrow, as it was never there to be seen. I use Safari and don't have Firefox on my MAC (to my knowledge).

    Thank you

    PS: I clicked on the 'automatically add' and downloaded the file, but when I tried to open it, I get the message "Safari cannot read this file. Cool, huh?

    See how to install Firefox on Mac.

    Open the Firefox disk image file and drag the Firefox program into the Applications folder on your hard drive.
    Do not double-click the Firefox to run from the disk image, but instead, drag it out of the DMG file.

  • ITunes cannot locate the music for a specific artist

    All my music does not appear on my computer and my itunes, except one of my artists. Their albums/songs appear in itunes, but they may not be located on my computer. It is the music of a single artist and two albums. It allows me to play the songs on my ipod, iphone and ipad, but when I try to play music on my computer, it displays an exclamation point and the custom find or play. What should I do?

    The exclamation point means that it cannot locate the files in the iTunes Media folder.

    Looking for a specific file in Spotlight. Since you know what an artist is missing, search for this artist, album or song using Spotlight. If it's on your computer, projector find. All the music files in iTunes should be in the music folder. Open the Finder, click go > go to folder and paste the following text:

    ~/Music/iTunes/iTunes Media/Music

    Or, if you think it has been moved out of the folder of music, just look in the iTunes Media folder. It could have been placed in the right folder

    ~/Music/iTunes/iTunes Media

    If you have a backup with Time Machine, you can also enter Time Machine and restore the file (assuming that she has been saved before he disappeared).

  • iTunes will not update on window 10 machine.  Setup cannot locate itunes664.msi

    In tempting to Upgrade iTunes to version 12.3.2 12.2.2.25 I get a message that the installer cannot locate the file "itunes6464.msi".  I tried to uninstall the existing version of the iTunes software and reinstall the latest version however, am not able to do it using the Windows Uninstall tool.  What is the solution?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    Start by missing error MSI.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Satellite A300 - cannot locate any wireless network

    Hi all

    I just bougth today a Satellite A300, everything works fine except the wireless access. Ethernet access works very well, and the problem is not with my wireless device since it works with my old laptop.

    It cannot locate any wireless network. It does not appear to be activated WLAN and I don't know how to enable it in the BIOS.

    The swicht wireles on the front of the laptop is turned ON, but not the function Fn + F8 appearing at all.

    Can anyone help please?

    What you mean with this WLAN is in the BIOS not enabled? Normally, you can change all BIOS options then try to activate it.
    Also make sure that the WLAN switch is on and active with FN + F8.

    Visit the Toshiba for a driver and the update to the BIOS:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  • HP DV7-3063cl laptop PC: BIOS cannot locate the serial number of the new motherboard more PXE - E61: Media test failure, check

    I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

    However, I have several problems:

    1. The BIOS cannot locate the serial number of the motherboard during the boot process and sends a message to the effect. I hit the ENTER button start continues.

    I tried to access the BIOS to enter the serial number or other possible solutions, I found online. Help forum a HP had a BIOS software tool for editing of Compaq in 2000 but said it would only be on the desktop and HP staff will provide a BIOS for my laptop.

    2. I get two error messages that

      • PXE - E61: Media test failure, check cable of

      • PXE - M0F: Exit PXE ROM

    I didn't know all the patches for this issue, but it only delays the process of starting shortly before it continues.

    Finally, the computer starts Windows, but other problems.

    mhscholder,

    There isn't any publicly available method to update information in the BIOS.  HP only authorized service providers can update the MB after installation.  You will get this message during boot every time.  You also won't be able to run a recovery since the recovery media is looking for this information.

    The PXE errors generally occur during the initialization of the network is listed in the boot order before the hard drive.

    -wes

  • OfficeJet Pro 8500 A909a: Cannot locate driver download page.

    Download page for driver cannot locate.

    OfficeJet Pro 8500 A909a

    MS Vista Ultimate 64-bit.

    When you use my Linux PC to try to find the drivers for a different PC, site Web just continues to send me round and no display drivers to download.  It seems that in the past, this has been a problem too.  This takes place with the latest version of Firefox - 37.0.1 and the current version of chrome - built 37.0.2062.120 on Debian 7.6, running on Debian 7.8 (281580) (64-bit).

    Go to hp.com

    Select: Support | Download drivers

    Under the tab "drivers and downloads".

    -Enter the product id: officejet pro 8500 A909a

    -Select 'go '.

    Expand it "+" that lists a link, and select it.

    None of the following links give a driver download!

    -Troubleshooting

    -How

    -Product info.

    -User guide

    -Video tutorials

    -More than Options

    Maybe one of the options should be "Driver Downloads".

    Just my $. 02.

    Hello

    A lot of links in there. Please use the direct driver (for Windows):

    http://ftp.HP.com/pub/softlib/software12/COL31041/MP-110033-2/OJ_AIO_P8500_A909_Full_Win_WW_140_408-4.exe

    (Note: many printers for 8500 series use the same drivers).

    Kind regards.

  • Error - cannot locate the DNS server of comments when try to use the Windows XP Edition computer remotely family assistance.

    Original title: cannot locate the comments of my windows xp home dns server.

    We have all two windows xp home, only difference, I can say is in the exception of firewall computers comments tab, there is no box remote assistance to check or uncheck.
    whenever we try I get it's message. Could not locate dns comments.
    something terribly simple became simply terrible.
    Thank you

    THANKS A LOT FOR YOUR CONTINUOUS SUPPORT. USING WINDOWS MESSENGER AND ACTIVATE THE REMOTE ASSISTANCE, AFTER FLUSHING DNS CACHE, WE HAD NO CONNECTION PROBLEM. ALTHOUGH STAY CONNECTED WAS A PROBLEM. NOW IDENTIFIED AS THE NETWORK ADAPTER ITSELF IS DEFECTIVE. I WAS ABLE TO SOLVE MOST OF THE QUESTIONS ON MY FATHER'S COMPUTER, IMPOSSIBLE WITHOUT YOUR TUTALIDGE. SO I HUMBLY GIVE THANKS TO PEOPLE LIKE YOU WHO UNSELFISSLY GIVE THEIR TIME. I AM OF COURSE SPENT ON CREDIT TO MY FATHER AND OTHERS SO THAT THEY TOO WILL SHARE THIS EXPERIENCE WITH OTHERS. AT THE PRESENT TIME, HE HAPPILY TALKS TO FRIENDS IN THE OLD COUNTRY IN THIS ONE. HIS 'SOCIAL' NETWORK ONCE MORE ALIVE WITH OLD FRIENDS. Thank you very much.
    RON

  • "Setup cannot locate the Windows installation you want to upgrade. Contact your system administrator. "in the blue screen.

    When I was trying to upgrade from Windows 2000 Professional to Windows XP Professional, after the first reboot, the system is returned with the following message: "Setup cannot locate the Windows installation, you want to upgrade.  Contact your system administrator. "in the blue screen. The only option is to F3 to exit. And the system may not start in Windows 2000 Professional more.

    Hello

    I suggest you follow the steps in troubleshooting section below and check if it helps:

    Error message "Setup cannot locate the Windows installation you want to upgrade.

    http://support.Microsoft.com/kb/242066

    Hope this helps

  • After installation of XP SP3 error, "cannot locate the Microsoft FoxPro support library".

    I've recently updated to service pack 3. When I try to open a program I use, it says "Cannot locate the Microsoft FoxPro support library". The program is run when I had service pack 2. Am I missing something with service pack 3?

    Hello

    Post your query in Visual FoxPro forums to improve the assistance:

    http://social.msdn.Microsoft.com/forums/en-us/visualfoxprogeneral/threads

    You can check the link where another customer a similar question below:

    http://social.msdn.Microsoft.com/forums/en-us/visualfoxprogeneral/thread/57918732-e804-456a-B506-6eaf0dc75bd5/

  • Cannot locate and download the latest Windows Defender definition update

    latest windows defender definition update was December 13, 2011 and nothing since then. On my Samsung P510 Portable Windows Update cannot locate or download the new Windows Defender definition updates.

    Go here: Microsoft Malware Protection Center

    http://www.Microsoft.com/security/portal/default.aspx

    Click on the link in the left under 'Get the latest updates of definition' for the x 86 [32-bit] or x 64 [64-bit] Windows edition installed.

    * Save * definitions that will download now.

    Once the download is complete, close all open programs and browsers.

    Now, run the downloaded file [if the edition of Windows Vista or Windows 7, then * right * click on it and choose "Run as Administrator".] Follow the prompts to allow it to run].

    What's the last installed defs?

    UTC/GMT is 09:36 Monday, December 19, 2011

  • I keep getting a request to insert the disc from center of solutions to the start - I cannot locate disc - how can I replace? thanks__

    I cannot locate the windows solution Center disk and cannot find how to get the replacement for vista

    http://h30434.www3.HP.com/PSG/board/message?board.ID=general&message.ID=65

    http://h30434.www3.HP.com/PSG/board/message?board.ID=OSandSW&message.ID=10968

    Read the info on the on the link about your problem of HP software, not Vista.

    http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

    Above is the contact HP link help you, if info to these links don't solve the problem for you...

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows cannot locate corefoundation.dll. I think I deleted it by mistake

    Windows cannot locate corefoundation.dll.  I think I deleted it by mistake

    Hello
    1 are you face any problem in your system?
     
    I suggest you to see link below and check if it helps.
     
    Hope this information is useful.
  • When restarting my Z3, it cannot locate my Sim Card

    When restarting my Z3, it cannot locate my Sim Card. I need to open the cover, then reinstall the sim card. What's wrong?

    It's good to restart regularly. You can check if the rebooting in safe mode brings the same question?

    http://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008

  • The message that McciAsyncEventMgrWnd does not work. Cannot locate ipworks6.dll

    Cannot locate ipworks6.dll

    Affects McciBrowser.exe

    You can also start / Control Panel / administrative tools / Event Viewer and look for errors related to all of the above mentioned files.  I would like to see you suggst request.  Here's how to use Event Viewer: http://www.petri.co.il/vista-event-viewer.htm.  If you find any click errors related to the entry for more information and try to copy and post it here so we can see what it says and maybe help.  It is not quite as easy as suggested above, Process Explorer but it may possibly find the problem and identify the cause, then we can find a solution.

    If this is indeed the application of Verizon Online Support and help we speak, maybe if uninstall you it and download and re - install it weill solve the problem.  Here is a download page with a number of applications from Verizon who use this program http://software.informer.com/getfree-mccibrowser-download-verizon/. -If you know one affected so try this procedure to see if that solves the problem.  It can't hurt to try, and it may very well do the trick.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • lock the images (how it happened)

    Hi guys,. I just use app to find my images in doubles, from there, I just don't see that I have a lot of images that I have; are the lock. How this happen? I don't know that I'm not done it. TQ

  • Cannot find drivers for my Satellite L500-21dts

    HelloI want to download all drivers support for laptop Satellite L500-21dts.I tried to find this model on the toshiba Web site but I have not found.so can you suggest where I could find all of these drivers. If possible please answer me to my emial i

  • code 80070246. Recommended windows vista update installation failed.

    Im having trouble with the windows vista operating system that was installed on my pc.  I tried the troubleshooting options but none seem not to work. Adter each failed attempt, followed by the error code 80070246, he said simply that the update coul

  • DSLR VIDEO FORUM

    Hi there, he know someone on a forum to discuss video DSLR?  Pleaseeeeeeeeeeee... If you know of one, let me know. Thank you

  • How to activate the touch screen of the toshiba portege M700

    I just upgraded my toshiba portege M700 vista home premium to vista ultimate. Finger touch screen is now turned off and I can't turn it back on. I went to the pen devices and entry in Control Panel and the relevant tab isn't there.