WLC 2504 comments Wifi login Page

Similar Questions

• Impossible to go to the WiFi router login page

  I use a netgear WiFi router. WiFi works great, internet works fine but I can't go to the login page without connecting the Ethernet cable. I should connect with cable to change the password and other things.

  No shot and tests... I unchecked the isolation of WiFi area and the problem resolved. I found it myself.

• Landing/login pages for WiFi networks open not opening not in browsers.

  If I connect to an open WiFi network page that should trigger a login/landing when I open a browser while this happens not & although there is a local connection I can't connect to the Internet. Can anyone suggest a solution because I'm totally stumped!

  
  
  This is reflected in all the major browsers.
  I can connect to secure networks and via a thin Ethernet cable.
  The problem persists even with the firewall disabled (Norton).
  I have not installed ZoneAlarm.
  The problem persists even if ipv6 is disabled.
  The connection is set to acquire an IP etc automatically.
  I acquired the page URLS to connect to my iPhone, and even help entering them manually do not work.
  Ping the same areas fails 100%.
  It makes no difference to renew all network adapters by using the ipconfig command.
  The network adapters are installed and working properly.

  Hello

  You can view these methods:

  Method 1:

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  You can also try resetting Internet Explorer and check.

  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Unable to connect to the Wifi OPEN network that requires a confirmation of the terms in a login page

  I tried to connect to open Wifi network that requires the confirmation of the terms in the login page using my Windows 8 tablet EI.  The login page appear not as I therefore had no way to verify the confirmation as a result of the inability to use the wifi network.  Is it possible to force the connection to the login page?  Thank you!

  Hello

  Thanks for posting your request here in the Microsoft Community.

  This issue could be caused due to any third-party security software or a firewall. I would like to this firewall security software is installed on your computer?

  Temporarily disable Windows Firewall and check if the problem persists. If you use a third party firewall then try disabling that as well. This is to check if the problem is caused due to any firewall related issue or not.

  See the following article from Microsoft Help to disable the Windows Firewall.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Firewall-from-start-to-finish

  Note: refer to the "Turn Windows Firewall on or off" section in the following article from Microsoft Help to disable the Windows Firewall. The steps apply as well to Windows 10 Technical Preview.

  Warning: deactivate temporarily the Antivirus\Firewall, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  If this problem is specific to a Web page, then you will need to contact the ISP as Karthik Vengaloor mentioned in his answer.

  Please reply with the status of the issue so that we can better help you.

• WiFi hotspot redirection to login pages does not

  Hello
  I use Win7 64 bit home on a new laptop. Wireless works fine on the laptop to my home router, hidden SSID and WPA2 etc.

  When in use and about various points of access, I can connect to the network provider without problem - I get the IP address, DNS and gateway via DHCP by default correctly. However, hotspots use page hijacking to redirect the user to a login page to access the internet. This doesn't seem to work, and ive tried everything but another browser. Thus, the icon shows limited access (no internet) for the connection.

  The hotspots are correctly redirected to the login page with an iPhone and a friends XP laptop. I can't find that many mentions of the problem, so maybe it's just my question, but is a facility enough vanilla on the machine, and I tried with AV and FW disabled as a test. I see also THE whole relevant advanced options that seem to block the redirect.

  Someone else has encountered this and know a fix?

  See you soon

  Hello

  Try these

  (I) reset the TCP/IP stack.
  Go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357Disable the IP assistance service:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  (II) disable IPv6:
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters. NOTE: You should do this for each network connection.

  Hope the info. is useful

• On iPad 3 no wifi connection page don't pop up for internet access

  Since iOS 9.3.4 update for my iPad 3, the login page popup usual to connect to the internet to Starbuck, Panera or in local medical facilities does not come to the top.  No problem with the wifi at home or a facility that does not require you to click "agree."

  Please take a look at problems joining the Wi - Fi networks that require the display of a redirect page in iOS 8.1.2? Check your settings in "AutoConnect". This could be your problem. The update may have changed this logic.

• Flash Player Plugin tries to access internet arriving on account login pages

  Firefox 24.0
  Adobe Flash Player Plugin 11.8 r800
  Software firewall: ZoneAlarm

  My firewall is set to "Manual control" and I get warnings for all attempts to access from the Internet.
  Firefox is already granted outbound access to the Internet, so I surfed without additional warnings. So if I go on YouTube, I can watch videos without receiving a prompt from my firewall.

  However when I visit a secure account login page (where I have to enter my username and PW) the firewall warns me that 'Firefox tries to use Adobe Flash Player 11.8 r800 to access the Internet.

  A prompt like this is provided by the firewall when a program uses another Internet access. If for example I click on a link in MS Excel, the firewall will tell me that Excel tries to use Firefox to access the Internet.

  Makes me concerned is:
  (1) Firefox already has access privileges. It should not "use Flash to access the internet.
  (2) this happens when I am about to use the keyboard to enter sensitive data in a secure page
  (3) there is no [apparent] Flash elements on the login pages.

  Could I have acquired a malicious Flash software that tries to collect the keystrokes and transmit somewhere? Is there a way to show (in Firefox) which Flash file works at some point? (This would let me distinguish what is what makes the access attempt)

  I am completely protected with Antivirus, anti-spam and breach prevention software. I also run Norton Power Eraser to see if there was anything at the root level. Nothing found.

  Thanks in advance for your comments.

  Pages can use Flash, even when there is no video is displayed. For example some sites use Flash for menus, some for audio and some may load Flash in their Google Analytics scripts so that they know as much as possible on your system.

  In most cases, the Flash Player will try to load a. SWF file, even if maybe it's not always easy. You might look for it in the Firefox Web Console.

  When viewing the page, press Ctrl + Shift + k, the reload of the page. If there is a request to support Flash on the page, it should appear in the console (if the request is blocked by a firewall, it must nevertheless appear as pending a request). There is a search/filter box where you could try to enter .swf to reduce the time needed to go through the list. You can find the URL of the requested file? That might or might not make you comfortable on demand.

• WLC WebAuth - multiple connection Web pages?

  Hi all

  I'm looking to set up a new SSID with an external start page, however, one of our existing SSID using local authentication. This presents this SSID with the login page default cisco web.

  If change the page of web connection to internal or external, will not effect the SSID already existing?

  In short, I need a SSID for use an external start page and use the internal page - is it possible?

  (Version 7.6 WLC)

  Thank you
  Nick

  No, it should not interfere with the existing page.  I had to configure once something like this:

  SSID-1 = Web strategy-Web authentication >-> Override-> downloaded Custom

  SSID-2 =-> Passthrough-> Override-> downloaded Custom of the Web in politics

  First of all, we'd show PUA request username and password

  Second one just ask users to accept the AUP.

• New authentication active directory on wlc 2504

  Hello

  There is problem with very often a new authentication for servers active directory. Every time only if:

  -loose client wlan/wifi because of the wifi hole or low RSSI

  -output of build for a while customer

  -wlan loose customer due to problem with homelessness (slow, not perfect)

  There is possibility to keep authenticated users? I had hope that options: sleep customer, max session timeout, max idle timeout

  help, but they do not work for me :(

  My access point (2702) are all in a group flexconnect. WLC 2504 (8.1.102.0). My security in WLAN config is:

  Layer2: wpa + wpa2, PSK

  Layer 3: web policy, authentication with LDAP servers + asleep on client

  I always try to improve the radio covers n fast roaming (11 k, r, v) but if someone leaves the area wifi, to do authenticated which is a little annoying...

  Thanks for any advice or an index

  Peter

  You want people who re - attach to your network for to re-authenticate.  It's a good thing.  We do not want people using the old credentials, or expose you to a security breach.

  This behavior is by design - and good.

• Access wireless of WLC 2106 comments problem

  We have a 2106 who was set up by a former employee.  Nobody stays in the company is qualified to configure.  Wireless access comments to work properly.  You must configure a guest user account.  They connect to the wireless comments, open a web browser and you connect.  Now for some reason any there is no login prompt.  People can connect to it and get an IP address, but that's all.  No guest login or anything else from there.

  Strategies of user login has been set to 0 and I put it at 8.  Who did nothing.  Under authentication Web > Web Login Page is internal (by default).  I don't know where else to check.  Anyone have any ideas?

  DNS must also work to ensure that the page of the portal to appear, so be sure that you have any DNS problems.

  Sent by Cisco Support technique iPhone App

• EBS R12.1 login page cannot display - after installation

  Hello

  I installed Oracle EBS R12.1 with multi node installation

  Host system: Windows 7

  VMPlaer:

  System1 comments: Database 64 bit OS Oracle Linux 6.7 Vision node

  System2 comments: OS Oracle Linux 64 bit Apps Tier 6.7

  EBS Application installed successfully, and I can see both are rising and running, I can see the login page (no forms) in DB and Apps nodes. And I can connect to the database of customer of db host system, but not able to open the login page to the host system. I checked the version of java and every thing looks fine at the host system, I can open it with other EBS on all issues.

  Based on Metalink notes:

  Solution1: Auto config ran level apps and does not - and file DBC looks good - no problem on the automatic configuration

  Option2: Recompiled from $FND_TOP/patch/115/bin - no JSP compiler error

  My conclusions from host system:

  Apps URL: http://192.168.64.130:8000/OA_HTML/AppsLogin

  When I am trying to open in Internet Explorer:

  This page cannot be displayed

  •Assurez - you have the web address http://192.168.64.130:8000 is correct.

  • Look for the page with your search engine.

  •Refresh page in a few minutes.

  When I am trying to open in Mozila:

  URL changed - which means that he is in communication with the server, something stops

  Mozila:

  http://ebsapps.Oracle:8000/OA_HTML/RF.jsp?function_id=1032925 & resp_id = 1 & resp_appl_id = 1 & security_group_id = 0 & lang_code = US & Params = 6AW2cE1mZ6NDm8Na0RNB9Q

  The connection has expired

  The server to ebsapps.oracle takes too long to respond.

  The site may be temporarily unavailable or too busy. Try again in a few moments.

  If you are unable to load any pages, check your computer's network connection.

  If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

  After delay, issue, I checked in the applications node

  I could see the suite of changes, I don't know I made these changes before installing. Seems to be after the restart apps replaced node network manager the /etc/resolv.conf file.

  / etc/etc/resolv.conf: this cannot be a problem, I think, because I can open the page of connection on the DB node

  options attempts: 5

  options timeout:15

  I'm not sure what could be the problem. Please guide me to solve this problem. Any help will be be appreciated.

  Thank you

  Reddy

  Found the issue,

  Need to ti, consult firewall for host system settings and details added linux host:

  C:\Windows\system32\drivers\etc-

  192.168.64.129 ebsdb.oracle

  192.168.64.130 ebsapps.oracle

  Thank you

  Reddy

• OBIEE 11 g: 1. need to hide the selection of the language of the login page option

  Hi Experts,
  
  I have some customization of OBIEE requirements:
  
  1. need to hide the login page language selection option (or if not English should be maintained as static selection)
  
  -J' tried to comment on content languagenames.xml of the/opt/fmw01/obiee/Oracle_BI1/bifoundation/web/msgdb/messages locatinon
  but now instead of English... now actually appeared... even for others too.
  
  2. need to hide my account tab option within the application.
  
  Thank you
  Deep' his

  Hello

  All point one: try to edit instanceconfig.xml by inserting the tags:

  
       en
  

  Now chosen language will be English, and given only one language is allowed no selection will not appear.

  Hope it's useful.

• HTTPS with the login page

  Hello
  
  How can I make it the default APEX login secure page (https)? The other pages will remain http. Is this possible? or I need to do the whole https application.
  
  I think that, in the future APEX releases, it will benefit if there are options for declarative control over http/https within the same application.
  
  Thank you.
  
  Andy

  Hi Andy,.

  just have HTTPS for the login page is precarious, because if you use HTTP for all other pages your session cookie can be stolen by a man-in-the-middle attack. Remember a year or two ago someone releasing a plugin Firebug to steal the cookie of session for Facebook, Twitter,... when these users are on the same WiFi.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Delete 'forgot password' to the IOM login page

  Hi all
  
  We remove 'Forgot password' user IOM login page. We want to centralize password management in the AD that will propagate the password to the IOM through password synchronization connector.
  
  MetaLink, it is mentioned that the 'Login Help' menu item is pre-programmed. Is this the case even for 'Forgot password'?
  
  Thank you

  Hello

  XlWebApp.war--> WEB - INF updating tiles - defs.Xml.

  Search for forgetPassword.do. Comment the two elements of this file. Patch the .war again.

  ~ Ketan

  Published by: i.m.k on July 26, 2010 03:29

• Try to connect to my yahoo on Safari takes me in a continuous loop to the login page. It works very well with Firefix.

  Try to connect to my Yahoo on Safari brings back me in a continuous loop to the login page. My registration using Firefox works fine.

  IM using ios10 on an iPhone 6 s