WLC connect with ACS5.3

Similar Questions

• AP failed to connect with the WLC.

  We have 5 sets of 1700 APs works on the mode of the controller and cisco WLC 2500.
  I configured the controller as I always used to do, but this time the access points have been unable to reach the controller.
  That's what I did:
  controller IP address:192.168.1.250/24
  GW:192.168.1.1
  Primary DHCP: 192.168.1.250
  I have connected the port1 controller with ethernet cable from the switch and the same switch I connected the AP.
  We used the adapter instead of the POE switch.
  I even tried assigning address to AP directly through the console as:
  CAPWAP ap controller ip address and so on. This did not help either.

  There was this message in the AP "% CAPWAP-5-DHCP_RENEW: could not find WLC by using DHCP IP." DHCP IP renewal. "
  Moreover, the POE ports in the controller, they provide enough energy for the PA to operate?
  Help, please.
  I have attached the PuTTY log as well.

  Hello
  WLC connection has successfully been created. Then he for some reason any. I don't know if this helps, but try to connect the ethernet cable directly to the AP instead of port POE port to THE.
  You can use port POE on AP even if you don t use the POE switch.

  And regarding the port POE on WLC. Cisco doesn´t recommend that you directly connect AP to WLC, but it is possible.

  Also I Don t see that the IP address is assigned by DHCP.
  Try also to use the commands:
  CAPWAP ap ip address...
  CAPWAP ap ip default-gateway...

  I guess the WLC and switch are configured correctly.

  EDIT:

  I had similar problem today.
  Just connect the cable from the console to AP, go to mode and type the commands:
  Claire capwap private-config
  Claire lwap private-config

  then reload AP with command "reload".

  After these commands AP joined succesfully WLC

• I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  Hello

  Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

• Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• Loss of connection with iCloud

  Whenever I login I have to re - connect with my iCloud - suggestions, no matter who?

  I assume you mean iCloud.com website?  How are you internet connection otherwise?

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• In a roaming network, Mac always connects with AE which is further away

  So, I had a roaming network for years to host a detached office which was too far from my house.  Worked very well.  Now, my family and I have moved into a temporary rented condo (two floors).  Therefore, there is a lot of wifi networks in the area in conflict with.

  After trying to extend the network (signal too low in the area), I decided to try the roaming network again.  Most of the time, it works very well.  But from time to time, my iMac (on the ground floor) connects with the Airport Extreme, which is on the floor instead of the Airport Express, which is down in the same room as the iMac.  What happens when it connects to the Airport Extreme on the floor, my Tx rate drops to less than 100 Mbps (sometimes dramatically if) and I am unable to listen to the music to my Airport Express without dropouts.

  The dressing was to turn off my wifi on the iMac, and then turn it back on.  It will then connect to the Airport Express.   The problem is that I have to do this in general once a day as my iMac will enter into the "standby" and periodically reconnect with Airport Extreme when I wake up (or if I re-enable it if off).  Ideally, he would stay with the Airport Express.

  So I hope that there is an alternative.  I thought about simply renaming the Airport Express network in the different name of Airport Extreme.  But all the itinerant instructions whereby I know that network names must be the same for all airports in the roaming network.  But perhaps this is not the case.

  Comments are appreciated!

  Unfortunately, you encounter a known issue with the use of a roaming network... and it is not specific to those provided by Apple either. The "solution" you use, although not elegant, is basically everything with that we have (at this time) to go.

  In theory, your iMac fixed, must always connect to the Wi - Fi with the signal network hard... not necessarily the closest to it. It may be possible, since you mentioned that you live in a highly congested environment Wi - Fi, your iMac is struggling to determine the right network to connect to when starting.

  Of course, a more "permanent" solution for your iMac, at least, would connect directly to the nearest base by Ethernet station.

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• 1st generation Apple TV cannot connect with the apple ID

  Have 1st Generation apple TV and recently cannot connect with my apple ID.

  The reset several times and nothing.

  Help?

  You have activated 2 no authorization of your Apple ID? If so, disable the connection from a browser and temporarily, then connecting ATV, then reactivate. If not, please describe what is happening when you try to connect. What message do you have?

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  Maybe it is locked, Apple do not unlock phones, then call O2.

• error "too many concurrent connections" with Gmail

  I started all of a sudden the error "too many concurrent connections" with Gmail with one of my gmail accounss. I googled and it seems like an old problem and I tried all the recommended solutions, but none worked. I have two gmail accounts and the other continues to function properly. Suggestions!

  Reduce the number of labels has solved this problem. Seems specific to TB and GMail (google says you can have hundreds of emails - I have about 60). There are mentions of which can be found via google - but no definitive statement on the problem, with workarounds, etc.. Now I will be anxious the next time I have to add a label, not knowing if it will work or cause this problem.

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• Bluetooth speaker no connection with iPod 5th generation

  Once solve you one problem, another pops up...

  A little more than a week ago, I bought an iHome iBT3, which is a protected against splashing, triangular-shaped speaker. It has bluetooth, which I used about three times now and it was working fine until today.

  The other day I had a problem with my iPod which translates into me trying the three methods; force reset, recovery of the device and reset all default settings. Although I have fixed my previous issue, when I tried to connect my speakers today, connected devices emerged as two things that I had never seen before. I chose the setting for iPod to 'forget' the devices and tried to connect my speakers.

  I watched for 15 minutes. The speaker tried to connect and connect and connect the iPod has tried to find the device, and they never linked between them; my iHome does not appear on my iPod and my iPod never read that there is a device in the region.

  I tried to force the delivery twice, the iPod and it has nothing and if it should happen again, I really, really don't like to restore my iPod because it took me two days and multiple handfuls of hair to do such a thing.

  Can I do to get my two devices to connect with each other?

  Thank you in advance.

  Update: The speaker is not connecting to my or my sister iPods.

  My father has a similar Bluetooth speaker if and which connects both of the devices.